- 20 3月, 2008 5 次提交
-
-
由 Michael Ellerman 提交于
The PCI bridge representing the PCIE root complex on Axon, contains device BARs for a memory range and ROM that define inbound accesses. This confuses the kernel resource management code -- the resources need to be hidden when Axon is a host bridge. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The cell IOMMU code to parse the dma-ranges properties, used for the fixed mapping, was broken in two ways for some devices. Firstly it didn't cope with empty dma-ranges properties. An empty property implies no translation so can be safely skipped. The code also wrongly assumed it would be looking at PCI devices, and hard coded the number of address and size cells. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Gortmaker 提交于
The wrapper script didn't have entries for the TQM8540 board and the SBC8548 or SBC8560 boards. I've assumed that the TQM8540 console is 8250 based and not CPM based by looking at its defconfig. There was also a trailing * on the TQM8555 entry that I removed too. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
Since the PMU is an NMI now, it can come at any time we are only soft disabled. We must hard disable around the two places we allow the kernel stack SLB and r1 to go out of sync. Otherwise the PMU exception can force a kernel stack SLB into another slot, which can lead to it getting evicted, which can lead to a nasty unrecoverable SLB miss in the exception entry code. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Roland McGrath 提交于
The PTRACE_SETREGS request was only recently added on powerpc, and gdb does not use it. So it slipped through without getting all the testing it should have had. The user_regset changes had a simple bug in storing to all of the 32-bit general registers block on 64-bit kernels. This bug only comes up with PTRACE_SETREGS, not PPC_PTRACE_SETREGS. It causes a BUG_ON to hit, so this fix needs to go in ASAP. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 16 3月, 2008 10 次提交
-
-
由 Helge Deller 提交于
- move boot_args[] into the init section - move $global$ into the read_mostly section - fix the following two section mismatches: WARNING: vmlinux.o(.text+0x9c): Section mismatch: reference to .init.text:start_kernel (between '$pgt_fill_loop' and '$is_pa20') WARNING: vmlinux.o(.text+0xa0): Section mismatch: reference to .init.text:start_kernel (between '$pgt_fill_loop' and '$is_pa20') Signed-off-by: NHelge Deller <deller@gmx.de> SIgned-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
Crestone Peak Slow is the 800MHz PA-8800 cpu in the C8000. 0x88B is probably the Crestone Peak Fast. Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
When we show_regs, we obviously have a struct pt_regs of the calling frame. Use these in show_stack so we don't have the entire bogus call trace up to the show_stack call. Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 James Bottomley 提交于
This patch adds the known pa8900 CPUs to the inventory list and removes the Crestone Peak one which apparently never escaped into the wild. Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Adrian Bunk 提交于
This patch moves the default parisc defconfig to arch/parisc/configs/generic_defconfig where it belongs and selects it as the default defconfig through KBUILD_DEFCONFIG. Signed-off-by: NAdrian Bunk <adrian.bunk@movial.fi> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
Commit 721fdf34 introduced a subtle bug by accidently removing the "static" from iodc_dbuf. This resulted in, what appeared to be, a trap without *current set to a task. Probably the result of a trap in real mode while calling firmware. Also do other misc clean ups. Since the only input from firmware is non blocking, share iodc_dbuf between input and output, and spinlock the only callers. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Originally, show_stack was used in BUG() output. However, a recent commit changed it to print register state (no idea what that's supposed to help, really...) and parisc was missing a backtrace because of it. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 14 3月, 2008 1 次提交
-
-
由 FUJITA Tomonori 提交于
iommu_is_span_boundary in lib/iommu-helper.c was exported for PARISC IOMMUs (commit 3715863a). Alpha's IOMMU can use it. This removes the check on the boundary size alignment because iommu_is_span_boundary does. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Acked-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 3月, 2008 7 次提交
-
-
由 Michael Ellerman 提交于
My recent hack to allocate the hash table under 1GB on cell was poorly tested, *cough*. It turns out on blades with large amounts of memory we fail to allocate the hash table at all. This is because RTAS has been instantiated just below 768MB, and 0-x MB are used by the kernel, leaving no areas that are both large enough and also naturally-aligned. For the cell IOMMU hack the page tables must be under 2GB, so use that as the limit instead. This has been tested on real hardware and boots happily. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Theodore Ts'o 提交于
Once again, this time with feeling.... - Ted >From c91cfaabc17f8a53807a2f31f067a732e34a1550 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o <tytso@mit.edu> Date: Wed, 12 Mar 2008 11:50:39 -0400 Subject: Export empty_zero_page The empty_zero_page symbol is exported by most other architectures (s390, ia64, x86, um), and an upcoming ext4 patch needs it because ZERO_PAGE() references empty_zero_page, and we need it to zero out an unitialized extents in ext4 files. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Tony Breeds 提交于
When building arch/powerpc/platforms/powermac/pic.c when !CONFIG_ADB_PMU we get the following warnings: arch/powerpc/platforms/powermac/pic.c: In function 'pmacpic_find_viaint': arch/powerpc/platforms/powermac/pic.c:623: warning: label 'not_found' defined but not used This fixes it. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
A bogus test for unassigned resources that came from our 32-bit PCI code ended up being "merged" by my previous patch series, breaking some 64-bit setups where devices have legal resources ending at 0xffffffff. This fixes it by completely changing the test. We now test for res->start == 0, as the generic code expects, and we also only do so on platforms that don't have the PPC_PCI_PROBE_ONLY flag set, as there are cases of pSeries and iSeries where it could be a valid value and those can't reassign devices. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
The pattern substitution rules were failing when used with zImage-dtb targets. If zImage-dtb.initrd was selected, the pattern substitution would generate "zImage.initrd-dtb" instead of "zImage-dtb.initrd" which caused the build to fail. This renames zImage-dtb to dtbImage to avoid the problem entirely. By not using the zImage prefix then is no potential for namespace collisions. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Some drivers (such as V4L2) have code that causes gcc to generate calls to __ucmpdi2 when compiling for 32-bit powerpc, which results in either a link-time error or a module that can't be loaded, as we don't currently have a __ucmpdi2. This adds one so these drivers can be used. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Randy Dunlap 提交于
Move 00-INDEX entries to power/00-INDEX (and add entry for pm_qos_interface.txt). Update references to moved filenames. Fix some trailing whitespace. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 12 3月, 2008 14 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thiemo Seufer 提交于
We support now other page sizes as well. Signed-off-by: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Adrian Bunk 提交于
With KBUILD_DEFCONFIG we don't have to ship a second copy of ip22_defconfig. Signed-off-by: NAdrian Bunk <adrian.bunk@movial.fi> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This allows a 48Hz clock to be selected on Malta and other systems. Note this not normally a sensible option as it results in rather high latencies for some kernel stuff. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Chris Dearman 提交于
Some of these are architecturally required for R2 processors so lets try to be bit closer to the real thing. This also provides access to the CPU cycle timer, even on multiprocessors. In that aspect its currently bug compatible to what would happen on a R2-based SMP. Signed-off-by: NChris Dearman <chris@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Wolfgang Ocker 提交于
0 is a valid device id (DSCR_CMD0_UART0_TX), so we can't use it to mark an empty entry in the device table. Use ~0 instead and search for id ~0 when looking for a free entry. Signed-off-by: NWolfgang Ocker <weo@reccoware.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Gleixner 提交于
quicklists cause a serious memory leak on 32-bit x86, as documented at: http://bugzilla.kernel.org/show_bug.cgi?id=9991 the reason is that the quicklist pool is a special-purpose cache that grows out of proportion. It is not accounted for anywhere and users have no way to even realize that it's the quicklists that are causing RAM usage spikes. It was supposed to be a relatively small pool, but as demonstrated by KOSAKI Motohiro, they can grow as large as: Quicklists: 1194304 kB given how much trouble this code has caused historically, and given that Andrew objected to its introduction on x86 (years ago), the best option at this point is to remove them. [ any performance benefits of caching constructed pgds should be implemented in a more generic way (possibly within the page allocator), while still allowing constructed pages to be allocated by other workloads. ] Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roland McGrath 提交于
The code to restart syscalls after signals depends on checking for a negative orig_ax, and for particular negative -ERESTART* values in ax. These fields are 64 bits and for a 32-bit task they get zero-extended. The syscall restart behavior is lost, a regression from a native 32-bit kernel and from 64-bit tasks' behavior. This patch fixes the problem by doing sign-extension where it matters. For orig_ax, the only time the value should be -1 but winds up as 0x0ffffffff is via a 32-bit ptrace call. So the patch changes ptrace to sign-extend the 32-bit orig_eax value when it's stored; it doesn't change the checks on orig_ax, though it uses the new current_syscall() inline to better document the subtle importance of the used of signedness there. The ax value is stored a lot of ways and it seems hard to get them all sign-extended at their origins. So for that, we use the current_syscall_ret() to sign-extend it only for 32-bit tasks at the time of the -ERESTART* comparisons. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 3月, 2008 3 次提交
-
-
由 Jeremy Kerr 提交于
At present, we can hit the BUG_ON in __spu_update_sched_info by reading the regs file of a context between two calls to spu_run. The spu_release_saved called by spufs_regs_read() is resulting in the (now non-runnable) context being placed back on the run queue, so the next call to spu_run ends up in the bug condition. This change uses the SPU_SCHED_SPU_RUN flag to only reschedule a context if it's still in spu_run(). Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
-
由 Jeremy Kerr 提交于
commit 4ef11014 introduced a usage of SCHED_IDLE to detect when a context is within spu_run. Instead of SCHED_IDLE (which has other meaning), add a flag to sched_flags to tell if a context should be running. Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
-
由 Ingo Molnar 提交于
I figured out another ACPI related regression today. randconfig testing triggered an early boot-time hang on a laptop of mine (32-bit x86, config attached) - the screen was scrolling ACPI AML exceptions [with no serial port and no early debugging available]. v2.6.24 works fine on that laptop with the same .config, so after a few hours of bisection (had to restart it 3 times - other regressions interacted), it honed in on this commit: | 10270d48 is first bad commit | | Author: Linus Torvalds <torvalds@woody.linux-foundation.org> | Date: Wed Feb 13 09:56:14 2008 -0800 | | acpi: fix acpi_os_read_pci_configuration() misuse of raw_pci_read() reverting this commit ontop of -rc5 gave a correctly booting kernel. But this commit fixes a real bug so the real question is, why did it break the bootup? After quite some head-scratching, the following change stood out: - pci_id->bus = tu8; + pci_id->bus = val; pci_id->bus is defined as u16: struct acpi_pci_id { u16 segment; u16 bus; ... and 'tu8' changed from u8 to u32. So previously we'd unconditionally mask the return value of acpi_os_read_pci_configuration() (raw_pci_read()) to 8 bits, but now we just trust whatever comes back from the PCI access routines and only crop it to 16 bits. But if the high 8 bits of that result contains any noise then we'll write that into ACPI's PCI ID descriptor and confuse the heck out of the rest of ACPI. So lets check the PCI-BIOS code on that theory. We have this codepath for 8-bit accesses (arch/x86/pci/pcbios.c:pci_bios_read()): switch (len) { case 1: __asm__("lcall *(%%esi); cld\n\t" "jc 1f\n\t" "xor %%ah, %%ah\n" "1:" : "=c" (*value), "=a" (result) : "1" (PCIBIOS_READ_CONFIG_BYTE), "b" (bx), "D" ((long)reg), "S" (&pci_indirect)); Aha! The "=a" output constraint puts the full 32 bits of EAX into *value. But if the BIOS's routines set any of the high bits to nonzero, we'll return a value with more set in it than intended. The other, more common PCI access methods (v1 and v2 PCI reads) clear out the high bits already, for example pci_conf1_read() does: switch (len) { case 1: *value = inb(0xCFC + (reg & 3)); which explicitly converts the return byte up to 32 bits and zero-extends it. So zero-extending the result in the PCI-BIOS read routine fixes the regression on my laptop. ( It might fix some other long-standing issues we had with PCI-BIOS during the past decade ... ) Both 8-bit and 16-bit accesses were buggy. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-