Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out the common code from check_prefetch()
and set_prefetch_mode() to __set_prefetch_mode().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Just use SECTOR_SIZE instead.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add struct ide_devset, S_* flags, *DEVSET() & ide*_devset_*() macros.

* Add 'const struct ide_devset **settings' to ide_driver_t.

* Use 'const struct ide_devset **settings' in ide_drive_t instead of
  'struct ide_settings_s *settings'.  Then convert core code and device
  drivers to use struct ide_devset and co.:

  - device settings are no longer allocated dynamically for each device
    but instead there is an unique struct ide_devset instance per setting

  - device driver keeps the pointer to the table of pointers to its
    settings in ide_driver_t.settings

  - generic settings are kept in ide_generic_setting[]

  - ide_proc_[un]register_driver(), ide_find_setting_by_name(),
    ide_{read,write}_setting() and proc_ide_{read,write}_settings()
    are updated accordingly

  - ide*_add_settings() are removed

* Remove no longer used __ide_add_setting(), ide_add_setting(),
  __ide_remove_setting() and auto_remove_settings().

* Remove no longer used TYPE_*, SETTING_*, ide_procset_t
  and ide_settings_t.

* ->keep_settings, ->using_dma, ->unmask, ->noflush, ->dsc_overlap,
  ->nice1, ->addressing, ->wcache and ->nowerr ide_drive_t fields
  can now be bitfield flags.

While at it:

* Rename ide_find_setting_by_name() to ide_find_setting().

* Rename write_wcache() to set_wcache().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

After rework settings will be no longer created dynamically
for each device so we need to make some fixups first.

* Use set_[ksettings,unmaskirq]() as a set function for
  ["keepsettings","unmaskirq"] setting.

* Allow writes to ["io_32bit","unmaskirq"] settings also when
  drive->no_[io_32bit,unmask] is set (this is checked later inside
  set_[io_32bit,unmaskirq]() anywyay and keeps consistency with
  the corresponding HDIO_SET_[32BIT,UNMASKINTR] ioctls).

* Use max possible multi sectors value (16) as an allowed max for
  "multcount" setting.  set_multcount() set function checks against
  device's max possbile value anyway and it makes the proc setting
  consistent with the corresponding HDIO_SET_MULTCOUNT ioctl.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Call ide_proc_register_driver() in ide*_setup() (just before
ide*_add_settings() call) instead of in ->probe method.

Despite being basically a preparation for /proc/ide/hd*/settings
rework this is a nice cleanup in itself.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Include <linux/ata.h> directly in <linux/ide.h>
  instead of through <linux/hdreg.h>.

* Include <linux/hdreg.h> only when needed.

Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Use multi PIO by default when available and remove no longer
needed CONFIG_IDEDISK_MULTI_MODE (it should be safe nowadays,
despite to what help entry has been saying).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Change ide_get_paired_drive() to return NULL if peer device
  is not present and update all users accordingly.

While at it:

* ide_get_paired_drive() -> ide_get_pair_dev()

* Use ide_get_pair_dev() in cs5530.c, sc1200.c and via82cxxx.c.

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove needless drive->present checks from ->probe methods
(device model takes care of that).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

They just obfuscate the code.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

init_irq() is now called only during initial host registration
so these BUG_ON()-s are no loner needed (+ the last one was done
too late anyway).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make ide_busy_sleep() take timeout value as a parameter
  and also allow use of AltStatus Register if requested with
  altstatus parameter.  Update existing users accordingly.

* Convert ide_driveid_update() and actual_try_to_identify()
  to use ide_busy_sleep().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix EXABYTENEST handling in probe_for_drive() (so drive->present
is checked for "nested" device) and cleanup enable_nest().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Friday 25 July 2008, Linus Torvalds wrote:
> 
> On Fri, 25 Jul 2008, Ben Dooks wrote:
> > 
> > personally, i would much prefer to see the loop being less evil
> > like:
> > 
> > 	for (p = s; p < end; p += 2)
> > 		be16_to_cpus((u16 *)p);
> 
> Well, in this case, the code actually depends on 'p' being back at the 
> start of the buffer by the end of it all, so it would need some more 
> changes than that. 
> 
> But yes, I applied David's patch, but I _also_ suspect that we would be 
> better off without code that does horrid things like casts and assignments 
> inside the function arguments.
> 
> So it would be nice to re-code that loop to be more readable. But due to 
> the reliance of 'p' being 's' after the loop, the minimal patch would be 
> something like the appended.
> 
> Bartlomiej - take this or not, I'm not going to commit it - I haven't 
> tested it, nor do I even have any machines that would trigger it. So this 
> is more a "maybe something like this" than anything else.

From: Linus Torvalds <torvalds@linux-foundation.org>
CC: Ben Dooks <ben-linux@fluff.org>
Cc: David Miller <davem@davemloft.net>
Cc: harvey.harrison@gmail.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove ->remap_0_to_1 and ->sect0 (they are always zero now).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* ERR_STAT   -> ATA_ERR
* INDEX_STAT -> ATA_IDX
* ECC_STAT   -> ATA_CORR
* DRQ_STAT   -> ATA_DRQ
* SEEK_STAT  -> ATA_DSC
* WRERR_STAT -> ATA_DF
* READY_STAT -> ATA_DRDY
* BUSY_STAT  -> ATA_BUSY

* MARK_ERR   -> ATA_AMNF
* TRK0_ERR   -> ATA_TRK0NF
* ABRT_ERR   -> ATA_ABORTED
* MCR_ERR    -> ATA_MCR
* ID_ERR     -> ATA_IDNF
* MC_ERR     -> ATA_MC
* ECC_ERR    -> ATA_UNC
* ICRC_ERR   -> ATA_ICRC

* BBD_ERR    -> ATA_BBK

Also:

* ILI_ERR    -> ATAPI_ILI
* EOM_ERR    -> ATAPI_EOM
* LFS_ERR    -> ATAPI_LFS

* CD         -> ATAPI_COD
* IO         -> ATAPI_IO
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use ATA_CMD_* defines instead of WIN_* ones.

* Include <linux/ata.h> directly instead of through <linux/hdreg.h>.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use ATA_CMD_* defines instead of WIN_* ones.

While at it:

* EXABYTE_ENABLE_NEXT -> ATA_EXABYTE_ENABLE_NEST

* SETFEATURES_{EN,DIS}_WCACHE -> SETFEATURES_WC_{ON,OFF}

* SETFEATURES_{EN,DIS}_AAM -> SETFEATURES_AAM_{ON,OFF}

* SMART_* -> ATA_SMART_*

* Remove stale comment from ide-proc.c.

Partially based on earlier work by Chris Wedgwood.
Acked-by: NChris Wedgwood <cw@f00f.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

idedisk_supports_hpa() -> ata_id_hpa_enabled().

The latter one also checks validity of words 82 & 85.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Replace open-coded check by ata_id_wcache_enabled()
(which also checks validity of word 85).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Replace open-coded checks by ata_id_current_chs_valid().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Factor out HDIO_[OBSOLETE,GET]_IDENTITY ioctls handling
  to ide_get_identity_ioctl().

* Use temporary buffer in ide_get_identity_ioctl() instead
  of accessing drive->id directly.

* Add ide_id_to_hd_driveid() inline to convert raw id into
  struct hd_driveid format (needed on big-endian).

* Use ide_id_to_hd_driveid() in ide_get_identity_ioctl(),
  cleanup ide_fix_driveid() and switch ide to use use raw id.

* Remove no longer needed drive->driveid.

  This leaves us with 3 users of struct hd_driveid in tree:
  - arch/um/drivers/ubd_kern.c
  - drivers/block/xsysace.c
  - drivers/usb/storage/isd200.c

While at it:

* Use ata_id_u{32,64}() and ata_id_has_{dma,lba,iordy}() macros.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Make drive->id an unnamed union so id can be accessed either by using
'u16 *id' or 'struct hd_driveid *driveid'.  Then convert all existing
drive->id users accordingly (using 'u16 *id' when possible).

This is an intermediate step to make ide 'struct hd_driveid'-free.

While at it:

- Add missing KERN_CONTs in it821x.c.

- Use ATA_ID_WORDS and ATA_ID_*_LEN defines.

- Remove unnecessary checks for drive->id.

- s/drive_table/table/ in ide_in_drive_list().

- Cleanup ide_config_drive_speed() a bit.

- s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave().

v2:
Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell)

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Do all __le16_to_cpu() swapping in one loop.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove superfluous checks for drive->mult_req.

* No need to zero drive's fields.

* Move the common code out of #ifdef scope.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This condition is checked by both ide_disk_init_mult_count()
and set_multcount() so no need to do it again in ide_disk_special().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The format specifier for rq->sector didn't specify the proper size and
signedness. Borislav Petkov discovered that the signedness for
rq->nr_sectors and rq->current_nr_sectors also were incorrect.
Signed-off-by: NMark de Wever <koraq@xs4all.nl>
Acked-by: NBorislav Petkov <petkovbb@gmail.com>
[bart: remove trailing whitespace]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: skcipher - Use RNG interface instead of get_random_bytes
  crypto: rng - RNG interface and implementation
  crypto: api - Add fips_enable flag
  crypto: skcipher - Move IV generators into their own modules
  crypto: cryptomgr - Test ciphers using ECB
  crypto: api - Use test infrastructure
  crypto: cryptomgr - Add test infrastructure
  crypto: tcrypt - Add alg_test interface
  crypto: tcrypt - Abort and only log if there is an error
  crypto: crc32c - Use Intel CRC32 instruction
  crypto: tcrypt - Avoid using contiguous pages
  crypto: api - Display larval objects properly
  crypto: api - Export crypto_alg_lookup instead of __crypto_alg_lookup
  crypto: Kconfig - Replace leading spaces with tabs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (29 commits)
  RDMA/nes: Fix slab corruption
  IB/mlx4: Set RLKEY bit for kernel QPs
  RDMA/nes: Correct error_module bit mask
  RDMA/nes: Fix routed RDMA connections
  RDMA/nes: Enhanced PFT management scheme
  RDMA/nes: Handle AE bounds violation
  RDMA/nes: Limit critical error interrupts
  RDMA/nes: Stop spurious MAC interrupts
  RDMA/nes: Correct tso_wqe_length
  RDMA/nes: Fill in firmware version for ethtool
  RDMA/nes: Use ethtool timer value
  RDMA/nes: Correct MAX TSO frags value
  RDMA/nes: Enable MC/UC after changing MTU
  RDMA/nes: Free NIC TX buffers when destroying NIC QP
  RDMA/nes: Fix MDC setting
  RDMA/nes: Add wqm_quanta module option
  RDMA/nes: Module parameter permissions
  RDMA/cxgb3: Set active_mtu in ib_port_attr
  RDMA/nes: Add support for 4-port 1G HP blade card
  RDMA/nes: Make mini_cm_connect() static
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: choose better identifiers
  dlm: remove bkl
  dlm: fix address compare
  dlm: fix locking of lockspace list in dlm_scand
  dlm: detect available userspace daemon
  dlm: allow multiple lockspace creates

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm: detect lost queue
  dm: publish dm_vcalloc
  dm: publish dm_table_unplug_all
  dm: publish dm_get_mapinfo
  dm: export struct dm_dev
  dm crypt: avoid unnecessary wait when splitting bio
  dm crypt: tidy ctx pending
  dm crypt: fix async inc_pending
  dm crypt: move dec_pending on error into write_io_submit
  dm crypt: remove inc_pending from write_io_submit
  dm crypt: tidy write loop pending
  dm crypt: tidy crypt alloc
  dm crypt: tidy inc pending
  dm exception store: use chunk_t for_areas
  dm exception store: introduce area_location function
  dm raid1: kcopyd should stop on error if errors handled
  dm mpath: remove is_active from struct dm_path
  dm mpath: use more error codes

Fixed up trivial conflict in drivers/md/dm-mpath.c manually.

Currently we disable barriers as soon as we get a buffer in xlog_iodone
that has the XBF_ORDERED flag cleared.  But this can be the case not only
for buffers where the barrier failed, but also the first buffer of a
split log write in case of a log wraparound.  Due to the disabled
barriers we can easily get directory corruption on unclean shutdowns.
So instead of using this check add a new buffer flag for failed barrier
writes.

This is a regression vs 2.6.26 caused by patch to use the right macro
to check for the ORDERED flag, as we previously got true returned for
every buffer.

Thanks to Toei Rei for reporting the bug.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NDavid Chinner <david@fromorbit.com>
Signed-off-by: NTim Shimmin <tes@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Support for I/O barriers
  GFS2: Add UUID to GFS2 sb
  GFS2: high time to take some time over atime
  GFS2: The war on bloat
  GFS2: GFS2 will panic if you misspell any mount options
  GFS2: Direct IO write at end of file error
  GFS2: Use an IS_ERR test rather than a NULL test
  GFS2: Fix race relating to glock min-hold time
  GFS2: Fix & clean up GFS2 rename
  GFS2: rm on multiple nodes causes panic
  GFS2: Fix metafs mounts
  GFS2: Fix debugfs glock file iterator

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits)
  [SCSI] zfcp: fix double dbf id usage
  [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev
  [SCSI] zfcp: fix erp list usage without using locks
  [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport
  [SCSI] zfcp: fix deadlock caused by shared work queue tasks
  [SCSI] zfcp: put threshold data in hba trace
  [SCSI] zfcp: Simplify zfcp data structures
  [SCSI] zfcp: Simplify get_adapter_by_busid
  [SCSI] zfcp: remove all typedefs and replace them with standards
  [SCSI] zfcp: attach and release SAN nameserver port on demand
  [SCSI] zfcp: remove unused references, declarations and flags
  [SCSI] zfcp: Update message with input from review
  [SCSI] zfcp: add queue_full sysfs attribute
  [SCSI] scsi_dh: suppress comparison warning
  [SCSI] scsi_dh: add Dell product information into rdac device handler
  [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option
  [SCSI] qla2xxx: fix printk format warnings
  [SCSI] qla2xxx: Update version number to 8.02.01-k8.
  [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
  [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
  ...

* 'for-2.6.28' of git://git.kernel.dk/linux-2.6-block: (132 commits)
  doc/cdrom: Trvial documentation error, file not present
  block_dev: fix kernel-doc in new functions
  block: add some comments around the bio read-write flags
  block: mark bio_split_pool static
  block: Find bio sector offset given idx and offset
  block: gendisk integrity wrapper
  block: Switch blk_integrity_compare from bdev to gendisk
  block: Fix double put in blk_integrity_unregister
  block: Introduce integrity data ownership flag
  block: revert part of d7533ad0e132f92e75c1b2eb7c26387b25a583c1
  bio.h: Remove unused conditional code
  block: remove end_{queued|dequeued}_request()
  block: change elevator to use __blk_end_request()
  gdrom: change to use __blk_end_request()
  memstick: change to use __blk_end_request()
  virtio_blk: change to use __blk_end_request()
  blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structure
  block: add lld busy state exporting interface
  block: Fix blk_start_queueing() to not kick a stopped queue
  include blktrace_api.h in headers_install
  ...

This merges phase 1 of the x86 tree, which is a collection of branches:

  x86/alternatives, x86/cleanups, x86/commandline, x86/crashdump,
  x86/debug, x86/defconfig, x86/doc, x86/exports, x86/fpu, x86/gart,
  x86/idle, x86/mm, x86/mtrr, x86/nmi-watchdog, x86/oprofile,
  x86/paravirt, x86/reboot, x86/sparse-fixes, x86/tsc, x86/urgent and
  x86/vmalloc

and as Ingo says: "these are the easiest, purely independent x86 topics
with no conflicts, in one nice Octopus merge".

* 'x86-v28-for-linus-phase1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (147 commits)
  x86: mtrr_cleanup: treat WRPROT as UNCACHEABLE
  x86: mtrr_cleanup: first 1M may be covered in var mtrrs
  x86: mtrr_cleanup: print out correct type v2
  x86: trivial printk fix in efi.c
  x86, debug: mtrr_cleanup print out var mtrr before change it
  x86: mtrr_cleanup try gran_size to less than 1M, v3
  x86: mtrr_cleanup try gran_size to less than 1M, cleanup
  x86: change MTRR_SANITIZER to def_bool y
  x86, debug printouts: IOMMU setup failures should not be KERN_ERR
  x86: export set_memory_ro and set_memory_rw
  x86: mtrr_cleanup try gran_size to less than 1M
  x86: mtrr_cleanup prepare to make gran_size to less 1M
  x86: mtrr_cleanup safe to get more spare regs now
  x86_64: be less annoying on boot, v2
  x86: mtrr_cleanup hole size should be less than half of chunk_size, v2
  x86: add mtrr_cleanup_debug command line
  x86: mtrr_cleanup optimization, v2
  x86: don't need to go to chunksize to 4G
  x86_64: be less annoying on boot
  x86, olpc: fix endian bug in openfirmware workaround
  ...