Pull device mapper fixes from Mike Snitzer:
 "A few dm-cache fixes, an invalid ioctl handling fix for dm multipath,
  a couple immutable biovec fixups for dm mirror, and a few dm-thin
  fixes.

  There will likely be additional dm-thin metadata and data resize fixes
  to include in 3.14-rc6 next week.

  Note to stable-minded folks: Immutable biovecs were introduced in
  3.14, so the related fixups for dm mirror are not needed in stable@
  kernels"

* tag 'dm-3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix truncation bug when mapping I/O to >2TB fast device
  dm thin: allow metadata space larger than supported to go unused
  dm mpath: fix stalls when handling invalid ioctls
  dm thin: fix the error path for the thin device constructor
  dm raid1: fix immutable biovec related BUG when retrying read bio
  dm io: fix I/O to multiple destinations
  dm thin: avoid metadata commit if a pool's thin devices haven't changed
  dm cache: do not add migration to completed list before unhooking bio
  dm cache: move hook_info into common portion of per_bio_data structure

Pull sound fixes from Takashi Iwai:
 "It's a bad habit to get a higher volume of fixes often lately, but
  things happen again.

  All commits found here are real bug fixes, and are mostly trivial.
  Most of changes in ASoC are the fixes for enum items due to the wrong
  API usages, in addition to a few DAPM mutex deadlock and other fixes.
  In HD-audio, only fixups for HP laptops.  Although diffstat shows
  much, the changes are simple: there are just so many different device
  entries there"

* tag 'sound-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: sta32x: Fix wrong enum for limiter2 release rate
  ASoC: da732x: Mark DC offset control registers volatile
  ALSA: hda/realtek - Add more entry for enable HP mute led
  ALSA: hda - Add a fixup for HP Folio 13 mute LED
  ASoC: wm8958-dsp: Fix firmware block loading
  ASoC: sta32x: Fix cache sync
  ALSA: hda/realtek - Add more entry for enable HP mute led
  ASoC: dapm: Add locking to snd_soc_dapm_xxxx_pin functions
  Input - arizona-haptics: Fix double lock of dapm_mutex
  ASoC: wm8400: Fix the wrong number of enum items
  ASoC: isabelle: Fix the wrong number of items in enum ctls
  ASoC: ad1980: Fix wrong number of items for capture source
  ASoC: wm8994: Fix the wrong number of enum items
  ASoC: wm8900: Fix the wrong number of enum items
  ASoC: wm8770: Fix wrong number of enum items
  ASoC: sta32x: Fix array access overflow
  ASoC: dapm: Correct regulator bypass error messages

Pull EDAC fixes from Borislav Petkov:
 "Two fixes below for PCI devices disappearing when a reference count
  underflow happens after a couple of insmod/rmmod cycles in succession"

* tag 'edac_fixes_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  i7300_edac: Fix device reference count
  i7core_edac: Fix PCI device reference count

Pull KVM fixes from Paolo Bonzini:
 "Three x86 fixes and one for ARM/ARM64.

  In particular, nested virtualization on Intel is broken in 3.13 and
  fixed by this pull request"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm, vmx: Really fix lazy FPU on nested guest
  kvm: x86: fix emulator buffer overflow (CVE-2014-0049)
  arm/arm64: KVM: detect CPU reset on CPU_PM_EXIT
  KVM: MMU: drop read-only large sptes when creating lower level sptes

Pull ARM64 fixes from Catalin Marinas:
 - !CONFIG_SMP build fix
 - pte bit testing macros conversion fix (int truncates top bits of
   long)
 - stack unwinding PC calculation fix

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix !CONFIG_SMP kernel build
  arm64: mm: Add double logical invert to pte accessors
  ARM64: unwind: Fix PC calculation

Pull powerpc fixes from Ben Herrenschmidt:
 "Here are a few more powerpc fixes for 3.14.

  Most of these are also CC'ed to stable and fix bugs in new
  functionality introduced in the last 2 or 3 versions"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/powernv: Fix indirect XSCOM unmangling
  powerpc/powernv: Fix opal_xscom_{read,write} prototype
  powerpc/powernv: Refactor PHB diag-data dump
  powerpc/powernv: Dump PHB diag-data immediately
  powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
  powerpc/ftrace: bugfix for test_24bit_addr
  powerpc/crashdump : Fix page frame number check in copy_oldmem_page
  powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly

Commit fb4a9602 (arm64: kernel: fix per-cpu offset restore on
resume) uses per_cpu_offset() unconditionally during CPU wakeup,
however, this is only defined for the SMP case.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Reported-by: NDave P Martin <Dave.Martin@arm.com>

Page table entries on ARM64 are 64 bits, and some pte functions such as
pte_dirty return a bitwise-and of a flag with the pte value. If the
flag to be tested resides in the upper 32 bits of the pte, then we run
into the danger of the result being dropped if downcast.

For example:
	gather_stats(page, md, pte_dirty(*pte), 1);
where pte_dirty(*pte) is downcast to an int.

This patch adds a double logical invert to all the pte_ accessors to
ensure predictable downcasting.
Signed-off-by: NSteve Capper <steve.capper@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

When remapping a block to the cache's fast device that is larger than
2TB we must not truncate the destination sector to 32bits.  The 32bit
temporary result of from_cblock() was being overflowed in
remap_to_cache() due to the logical left shift.

Use an intermediate 64bit type to store the 32bit from_cblock() result
to fix the overflow.
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

We need to unmangle the full address, not just the register
number, and we also need to support the real indirect bit
being set for in-kernel uses.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]

The OPAL firmware functions opal_xscom_read and opal_xscom_write
take a 64-bit argument for the XSCOM (PCB) address in order to
support the indirect mode on P8.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13]

As Ben suggested, the patch prints PHB diag-data with multiple
fields in one line and omits the line if the fields of that
line are all zero.

With the patch applied, the PHB3 diag-data dump looks like:

PHB3 PHB#3 Diag-data (Version: 1)

  brdgCtl:     00000002
  RootSts:     0000000f 00400000 b0830008 00100147 00002000
  nFir:        0000000000000000 0030006e00000000 0000000000000000
  PhbSts:      0000001c00000000 0000000000000000
  Lem:         0000000000100000 42498e327f502eae 0000000000000000
  InAErr:      8000000000000000 8000000000000000 0402030000000000 0000000000000000
  PE[  8] A/B: 8480002b00000000 8000000000000000

[ The current diag data is so big that it overflows the printk
  buffer pretty quickly in cases when we get a handful of errors
  at once which can happen. --BenH
]
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The PHB diag-data is important to help locating the root cause for
EEH errors such as frozen PE or fenced PHB. However, the EEH core
enables IO path by clearing part of HW registers before collecting
this data causing it to be corrupted.

This patch fixes this by dumping the PHB diag-data immediately when
frozen/fenced state on PE or PHB is detected for the first time in
eeh_ops::get_state() or next_error() backend.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The new ELFv2 little-endian ABI increases the stack redzone -- the
area below the stack pointer that can be used for storing data --
from 288 bytes to 512 bytes.  This means that we need to allow more
space on the user stack when delivering a signal to a 64-bit process.

To make the code a bit clearer, we define new USER_REDZONE_SIZE and
KERNEL_REDZONE_SIZE symbols in ptrace.h.  For now, we leave the
kernel redzone size at 288 bytes, since increasing it to 512 bytes
would increase the size of interrupt stack frames correspondingly.

Gcc currently only makes use of 288 bytes of redzone even when
compiling for the new little-endian ABI, and the kernel cannot
currently be compiled with the new ABI anyway.

In the future, hopefully gcc will provide an option to control the
amount of redzone used, and then we could reduce it even more.

This also changes the code in arch_compat_alloc_user_space() to
preserve the expanded redzone.  It is not clear why this function would
ever be used on a 64-bit process, though.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
CC: <stable@vger.kernel.org> [v3.13]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The branch target should be the func addr, not the addr of func_descr_t.
So using ppc_function_entry() to generate the right target addr.
Signed-off-by: NLiu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

In copy_oldmem_page, the current check using max_pfn and min_low_pfn to
decide if the page is backed or not, is not valid when the memory layout is
not continuous.

This happens when running as a QEMU/KVM guest, where RTAS is mapped higher
in the memory. In that case max_pfn points to the end of RTAS, and a hole
between the end of the kdump kernel and RTAS is not backed by PTEs. As a
consequence, the kdump kernel is crashing in copy_oldmem_page when accessing
in a direct way the pages in that hole.

This fix relies on the memblock's service memblock_is_region_memory to
check if the read page is part or not of the directly accessible memory.
Signed-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently we're storing a host endian RTAS token in
rtas_stop_self_args.token.  We then pass that directly to rtas.  This is
fine on big endian however on little endian the token is not what we
expect.

This will typically result in hitting:
	panic("Alas, I survived.\n");

To fix this we always use the stop-self token in host order and always
convert it to be32 before passing this to rtas.
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit e504c909 (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.

nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup.  In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.

The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.

Fixes: e504c909Reported-by: NKashyap Chamarty <kchamart@redhat.com>
Reported-by: NStefan Bader <stefan.bader@canonical.com>
Tested-by: NKashyap Chamarty <kchamart@redhat.com>
Tested-by: NAnthoine Bourgeois <bourgeois@bertin.fr>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull Metag arch and asm-generic fixes from James Hogan:

 - Add the new sched_setattr/sched_getattr syscalls to the asm-generic
   syscall list, which is used by arc, arm64, c6x, hexagon, metag,
  openrisc, score, tile, and unicore32.

 - An IRQ affinity bug fix for metag to prevent interrupts being
   vectored to offline CPUs when their affinity is changed via
   /proc/irq/ (thanks tglx).

* tag 'metag-fixes-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  irq-metag*: stop set_affinity vectoring to offline cpus
  asm-generic: add sched_setattr/sched_getattr syscalls

Merge tag 'pwm/for-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fix from Thierry Reding:
 "Just a single trivial patch to plug a memory leak in an error path"

* tag 'pwm/for-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: lp3943: Fix potential memory leak during request

Pull filesystem fixes from Jan Kara:
 "Notification, writeback, udf, quota fixes

  The notification patches are (with one exception) a fallout of my
  fsnotify rework which went into -rc1 (I've extented LTP to cover these
  cornercases to avoid similar breakage in future).

  The UDF patch is a nasty data corruption Al has recently reported,
  the revert of the writeback patch is due to possibility of violating
  sync(2) guarantees, and a quota bug can lead to corruption of quota
  files in ocfs2"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: Allocate overflow events with proper type
  fanotify: Handle overflow in case of permission events
  fsnotify: Fix detection whether overflow event is queued
  Revert "writeback: do not sync data dirtied after sync start"
  quota: Fix race between dqput() and dquot_scan_active()
  udf: Fix data corruption on file type conversion
  inotify: Fix reporting of cookies for inotify events

Pull ubifs fix from Artem Bityutskiy:
 "Just a single fix for the UBI module unload path which makes sure we
  do not touch freed memory"

* tag 'upstream-3.14-rc5' of git://git.infradead.org/linux-ubifs:
  UBI: fix some use after free bugs

The problem occurs when the guest performs a pusha with the stack
address pointing to an mmio address (or an invalid guest physical
address) to start with, but then extending into an ordinary guest
physical address.  When doing repeated emulated pushes
emulator_read_write sets mmio_needed to 1 on the first one.  On a
later push when the stack points to regular memory,
mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0.

As a result, KVM exits to userspace, and then returns to
complete_emulated_mmio.  In complete_emulated_mmio
vcpu->mmio_cur_fragment is incremented.  The termination condition of
vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved.
The code bounces back and fourth to userspace incrementing
mmio_cur_fragment past it's buffer.  If the guest does nothing else it
eventually leads to a a crash on a memcpy from invalid memory address.

However if a guest code can cause the vm to be destroyed in another
vcpu with excellent timing, then kvm_clear_async_pf_completion_queue
can be used by the guest to control the data that's pointed to by the
call to cancel_work_item, which can be used to gain execution.

Fixes: f78146b0Signed-off-by: NAndrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org (3.5+)
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 1fcf7ce0 (arm: kvm: implement CPU PM notifier) added
support for CPU power-management, using a cpu_notifier to re-init
KVM on a CPU that entered CPU idle.

The code assumed that a CPU entering idle would actually be powered
off, loosing its state entierely, and would then need to be
reinitialized. It turns out that this is not always the case, and
some HW performs CPU PM without actually killing the core. In this
case, we try to reinitialize KVM while it is still live. It ends up
badly, as reported by Andre Przywara (using a Calxeda Midway):

[    3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760
[    3.663897] unexpected data abort in Hyp mode at: 0xc067d150
[    3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0

The trick here is to detect if we've been through a full re-init or
not by looking at HVBAR (VBAR_EL2 on arm64). This involves
implementing the backend for __hyp_get_vectors in the main KVM HYP
code (rather small), and checking the return value against the
default one when the CPU notifier is called on CPU_PM_EXIT.
Reported-by: NAndre Przywara <osp@andrep.de>
Tested-by: NAndre Przywara <osp@andrep.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Rob Herring <rob.herring@linaro.org>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It was always intended that a user could provide a thin metadata device
that is larger than the max supported by the on-disk format.  The extra
space would just go unused.

Unfortunately that never worked.  If the user attempted to use a larger
metadata device on creation they would get an error like the following:

 device-mapper: space map common: space map too large
 device-mapper: transaction manager: couldn't create metadata space map
 device-mapper: thin metadata: tm_create_with_sm failed
 device-mapper: table: 252:17: thin-pool: Error creating metadata object
 device-mapper: ioctl: error adding target to table

Fix this by allowing the initial metadata space map creation to cap its
size at the max number of blocks supported (DM_SM_METADATA_MAX_BLOCKS).
get_metadata_dev_size() must also impose DM_SM_METADATA_MAX_BLOCKS (via
THIN_METADATA_MAX_SECTORS), otherwise extending metadata would cap at
THIN_METADATA_MAX_SECTORS_WARNING (which is larger than supported).

Also, the calculation for THIN_METADATA_MAX_SECTORS didn't account for
the sizeof the disk_bitmap_header.  So the supported maximum metadata
size is a bit smaller (reduced from 33423360 to 33292800 sectors).

Lastly, remove the "excess space will not be used" warning message from
get_metadata_dev_size(); it resulted in printing the warning multiple
times.  Factor out warn_if_metadata_device_too_big(), call it from
pool_ctr() and maybe_resize_metadata_dev().
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NJoe Thornber <ejt@redhat.com>

Merge tag 'asoc-v3.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.14

A few more driver specific bug fixes, all driver specific things that
only affect users of those devices.

ASoC: Fixes for v3.14

A somewhat large set of fixes here due to the identification of some
systematic problems with hard to use APIs in the subsystem.  Takashi did
a lot of work to address the enumeration API which uncovered a number of
off by one bugs caused by confusing APIs while Charles addressed issues
in the locking around DAPM.

# gpg: Signature made Sun 23 Feb 2014 13:29:34 KST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Fixes for v3.14

A few fixes, all driver speccific ones.  The DaVinci ones aren't as
clear as they should be from the subject lines on the commits but they
fix issues which will prevent correct operation in some use cases and
only affect that particular driver so are reasonably safe.

# gpg: Signature made Wed 19 Feb 2014 13:23:13 KST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

There is a typo in the Limiter2 Release Rate control, a wrong enum for
Limiter1 is assigned.  It must point to Limiter2.
Spotted by a compile warning:

In file included from sound/soc/codecs/sta32x.c:34:0:
sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable]
 static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
                             ^
include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’
  struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
                  ^
sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’
 static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum,
        ^
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: <stable@vger.kernel.org>

Merge tag 'asoc-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.14

A somewhat large set of fixes here due to the identification of some
systematic problems with hard to use APIs in the subsystem.  Takashi did
a lot of work to address the enumeration API which uncovered a number of
off by one bugs caused by confusing APIs while Charles addressed issues
in the locking around DAPM.

Read-only large sptes can be created due to read-only faults as
follows:

- QEMU pagetable entry that maps guest memory is read-only
due to COW.
- Guest read faults such memory, COW is not broken, because
it is a read-only fault.
- Enable dirty logging, large spte not nuked because it is read-only.
- Write-fault on such memory causes guest to loop endlessly
(which must go down to level 1 because dirty logging is enabled).

Fix by dropping large spte when necessary.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fix a memory leak in the lp3943_pwm_request_map() error handling path.
Make sure already allocated pwm map memory is freed correctly.
Detected by Coverity: CID 1162829.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Acked-by: NMilo Kim <milo.kim@ti.com>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

An invalid ioctl will never be valid, irrespective of whether multipath
has active paths or not.  So for invalid ioctls we do not have to wait
for multipath to activate any paths, but can rather return an error
code immediately.  This fix resolves numerous instances of:

 udevd[]: worker [] unexpectedly returned with status 0x0100

that have been seen during testing.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org

The driver reads from the DC offset control registers during callibration
but since the registers are marked as volatile and there is a register
cache the values will not be read from the hardware after the first reading
rendering the callibration ineffective.

It appears that the driver was originally written for the ASoC level
register I/O code but converted to regmap prior to merge and this issue
was missed during the conversion as the framework level volatile register
functionality was not being used.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: stable@vger.kernel.org

I lost this SSID. Add it into the fixup table.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Merge misc fixes from Andrew Morton.

* emailed patches from Andrew Morton akpm@linux-foundation.org>:
  MAINTAINERS: change mailing list address for Altera UART drivers
  Makefile: fix build with make 3.80 again
  MAINTAINERS: update L: misuses
  Makefile: fix extra parenthesis typo when CC_STACKPROTECTOR_REGULAR is enabled
  ipc,mqueue: remove limits for the amount of system-wide queues
  memcg: change oom_info_lock to mutex
  mm, thp: fix infinite loop on memcg OOM
  drivers/fmc/fmc-write-eeprom.c: fix decimal permissions
  drivers/iommu/omap-iommu-debug.c: fix decimal permissions
  mm, hwpoison: release page on PageHWPoison() in __do_fault()

The nios2-dev list has been moved to the RocketBoards infrastructure, so
adjust the address accordingly.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

According to Documentation/Changes, make 3.80 is still being supported
for building the kernel, hence make files must not make (unconditional)
use of features introduced only in newer versions.  Commit 8779657d
("stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG") however
introduced an "else ifdef" construct which make 3.80 doesn't understand.

Also correct a warning message still referencing the old config option
name.

Apart from that I question the use of "ifdef" here (but it was used that
way already prior to said commit): ifeq (,y) would seem more to the
point.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>