Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

regulator_enable() is marked as as __must_check.  Therefore the return
value of regulator_enable() should be checked.  Also, this patch checks
return value of regulator_set_voltage().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missing braces to include error message.  The error message is
related to the return value for sysfs_create_group().  However,
sysfs_create_group() is called when pdata->en_ambl_sens is not zero.
Thus, the checking return value should be included in the if statement.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dev_info() is preferred to pr_info().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dev_info() is preferred to pr_info().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dev_err()/dev_info() are preferred to pr_err()/pr_info().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While doing with make W=1 gcc (gcc (GCC) 4.7.2 20121109 (Red Hat
4.7.2-8)) I found

  drivers/video/backlight/lp855x_bl.c: In function `lp855x_probe':
  drivers/video/backlight/lp855x_bl.c:342:35: warning: variable `mode' set but not used [-Wunused-but-set-variable]

fixed by removing it as since its not used anywhere
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Acked-by: NMilo Kim <milo.kim@ti.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When platform_driver_probe() is used, bind/unbind via sysfs is disabled.
Thus, __init/__exit annotations can be added to probe()/remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the module_platform_driver_probe() macro which makes the code
smaller and simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When platform_driver_probe() is not used, bind/unbind via sysfs is
enabled.  Thus, __init/__exit annotations should be removed from
probe()/remove().
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NRyan Mallon <rmallon@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the macro such as SIMPLE_DEV_PM_OPS is used, there is no need to
use '#ifdef CONFIG_PM' to prevent build error.  Thus, this patch removes
unnecessary ifdefs.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPetko Manolov <petkan@nucleusys.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Massimo Dal Zotto stopped maintaining the i8k driver several years ago,
so move his name from MAINTAINERS to CREDITS.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Massimo Dal Zotto <dz@debian.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create a new N: entry type in MAINTAINERS which performs a regex match
against filenames; either those extracted from patch +++ or --- lines,
or those specified on the command-line using the -f option.

This provides the same benefits as using a K: regex option to match a
set of filenames (see commit eb90d085 "get_maintainer: allow
keywords to match filenames"), but without the disadvantage that
"random" file content, such as comments, will ever match the regex.
Hence, revert most of that commit.

Switch the Tegra entry from using K: to N:

[akpm@linux-foundation.org: fix typo in docs, per Marcin]
Reported-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Suggested-by: NJoe Perches <joe@perches.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Error value got overwritten instantly.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

printk.h uses va_list but doesn't include stdarg.h.  Hence printk.h is
unusable unless its includer has already included kernel.h (which includes
stdarg.h).

Remove the dependency by including stdarg.h in printk.h
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The early console implementations are the same all over the place.  Move
the print function to kernel/printk and get rid of the copies.

[akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list]
[paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Tested-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 7ff9554b ("printk: convert byte-buffer to variable-length
record buffer") removed start and end parameters from
call_console_drivers, but those parameters still exist in
include/trace/events/printk.h.

Without start and end parameters handling, printk tracing became more
simple as: trace_console(text, len);
Signed-off-by: Nzhangwei(Jovi) <jovi.zhangwei@huawei.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__builtin_object_size is known to be broken on gcc 4.6+.
See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48880 for details.

This causes unnecssary build warnings and errors such as

  In function 'copy_from_user', inlined from 'sb16_copy_from_user'
	at sound/oss/sb_audio.c:878:22:
  arch/x86/include/asm/uaccess_32.h:211:26: error: call to 'copy_from_user_overflow'
	declared with attribute error: copy_from_user() buffer size is not provably correct
  make[3]: [sound/oss/sb_audio.o] Error 1 (ignored)

Disable it where broken.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch depends on "genalloc: add devres support, allow to find a
managed pool by device", which provides the of_get_named_gen_pool and
dev_get_gen_pool functions.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NJavier Martin <javier.martin@vista-silicon.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Dong Aisheng <dong.aisheng@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Shijie <shijie8@gmail.com>
Cc: Matt Porter <mporter@ti.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver requests and remaps a memory region as configured in the
device tree.  It serves memory from this region via the genalloc API.  It
optionally enables the SRAM clock.

Other drivers can retrieve the genalloc pool from a phandle pointing to
this drivers' device node in the device tree.

The allocation granularity is hard-coded to 32 bytes for now, to make the
SRAM driver useful for the 6502 remoteproc driver.  There is overhead for
bigger SRAMs, where only a much coarser allocation granularity is needed:
At 32 bytes minimum allocation size, a 256 KiB SRAM needs a 1 KiB bitmap
to track allocations.

[akpm@linux-foundation.org: fix Kconfig text, make sram_init static]
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Tested-by: NMichal Simek <monstr@monstr.eu>
Cc: Dong Aisheng <dong.aisheng@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Shijie <shijie8@gmail.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Matt Porter <mporter@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds three exported functions to lib/genalloc.c:
devm_gen_pool_create, dev_get_gen_pool, and of_get_named_gen_pool.

devm_gen_pool_create is a managed version of gen_pool_create that keeps
track of the pool via devres and allows the management code to
automatically destroy it after device removal.

dev_get_gen_pool retrieves the gen_pool for a given device, if it was
created with devm_gen_pool_create, using devres_find.

of_get_named_gen_pool retrieves the gen_pool for a given device node and
property name, where the property must contain a phandle pointing to a
platform device node.  The corresponding platform device is then fed into
dev_get_gen_pool and the resulting gen_pool is returned.

[akpm@linux-foundation.org: make the of_get_named_gen_pool() stub static, fixing a zillion link errors]
[akpm@linux-foundation.org: squish "struct device declared inside parameter list" warning]
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Tested-by: NMichal Simek <monstr@monstr.eu>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Matt Porter <mporter@ti.com>
Cc: Dong Aisheng <dong.aisheng@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Huang Shijie <shijie8@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return a negative error code from the error handling case instead of 0, as
returned elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The memcg is not referenced, so it can be destroyed at anytime right
after we exit rcu read section, so it's not safe to access it.

To fix this, we call css_tryget() to get a reference while we're still
in rcu read section.

This also removes a bogus comment above __memcg_create_cache_enqueue().
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NGlauber Costa <glommer@parallels.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When hot removing memory presented at boot time, following messages are shown:

  kernel BUG at mm/slub.c:3409!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: ebtable_nat ebtables xt_CHECKSUM iptable_mangle bridge stp llc ipmi_devintf ipmi_msghandler sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc vfat fat dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun uinput iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode pcspkr sg i2c_i801 lpc_ich mfd_core igb i2c_algo_bit i2c_core e1000e ptp pps_core tpm_infineon ioatdma dca sr_mod cdrom sd_mod crc_t10dif usb_storage megaraid_sas lpfc scsi_transport_fc scsi_tgt scsi_mod
  CPU 0
  Pid: 5091, comm: kworker/0:2 Tainted: G        W    3.9.0-rc6+ #15
  RIP: kfree+0x232/0x240
  Process kworker/0:2 (pid: 5091, threadinfo ffff88084678c000, task ffff88083928ca80)
  Call Trace:
    __release_region+0xd4/0xe0
    __remove_pages+0x52/0x110
    arch_remove_memory+0x89/0xd0
    remove_memory+0xc4/0x100
    acpi_memory_device_remove+0x6d/0xb1
    acpi_device_remove+0x89/0xab
    __device_release_driver+0x7c/0xf0
    device_release_driver+0x2f/0x50
    acpi_bus_device_detach+0x6c/0x70
    acpi_ns_walk_namespace+0x11a/0x250
    acpi_walk_namespace+0xee/0x137
    acpi_bus_trim+0x33/0x7a
    acpi_bus_hot_remove_device+0xc4/0x1a1
    acpi_os_execute_deferred+0x27/0x34
    process_one_work+0x1f7/0x590
    worker_thread+0x11a/0x370
    kthread+0xee/0x100
    ret_from_fork+0x7c/0xb0
  RIP  [<ffffffff811c41d2>] kfree+0x232/0x240
   RSP <ffff88084678d968>

The reason why the messages are shown is to release a resource
structure, allocated by bootmem, by kfree().  So when we release a
resource structure, we should check whether it is allocated by bootmem
or not.

But even if we know a resource structure is allocated by bootmem, we
cannot release it since SLxB cannot treat it.  So for reusing a resource
structure, this patch remembers it by using bootmem_resource as follows:

When releasing a resource structure by free_resource(), free_resource()
checks whether the resource structure is allocated by bootmem or not.
If it is allocated by bootmem, free_resource() adds it to
bootmem_resource.  If it is not allocated by bootmem, free_resource()
release it by kfree().

And when getting a new resource structure by get_resource(),
get_resource() checks whether bootmem_resource has released resource
structures or not.  If there is a released resource structure,
get_resource() returns it.  If there is not a releaed resource
structure, get_resource() returns new resource structure allocated by
kzalloc().

[akpm@linux-foundation.org: s/get_resource/alloc_resource/]
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are times when HIGHMEM is enabled, but we don't prefer
CONFIG_BOUNCE to be enabled.  CONFIG_BOUNCE can reduce the block device
throughput, and this is not ideal for machines where we don't gain much
by enabling it.  So provide an option to deselect CONFIG_BOUNCE.  The
observation was made while measuring eMMC throughput using iozone on an
ARM device with 1GB RAM.
Signed-off-by: NVinayak Menon <vinayakm.list@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, we do memset() before reserving the area.  This may not cause
any problem, but it is somewhat weird.  So change execution order.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Jiang Liu <liuj97@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove unused argument and make function static, because there is no user
outside of nobootmem.c
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Jiang Liu <liuj97@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

bh allocation uses kmem_cache_zalloc() so we needn't call
'init_buffer(bh, NULL, NULL)' and perform other set-zero-operations.
Signed-off-by: NJianpeng Ma <majianpeng@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When booting x86 system contains memoryless node, node numbers of CPUs
on memoryless node were changed to nearest online node number by
init_cpu_to_node() because the node is not online.

In my system, node numbers of cpu#30-44 and 75-89 were changed from 2 to
0 as follows:

  $ numactl --hardware
  available: 2 nodes (0-1)
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 30 31 32 33 34 35 36 37 38 39 40
  41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 75 76 77 78 79 80 81 82
  83 84 85 86 87 88 89
  node 0 size: 32394 MB
  node 0 free: 27898 MB
  node 1 cpus: 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 60 61 62 63 64 65 66
  67 68 69 70 71 72 73 74
  node 1 size: 32768 MB
  node 1 free: 30335 MB

If we hot add memory to memoryless node and offine/online all CPUs on
the node, node numbers of these CPUs are changed to correct node numbers
by srat_detect_node() because the node become online.

In this case, node numbers of cpu#30-44 and 75-89 were changed from 0 to
2 in my system as follows:

  $ numactl --hardware
  available: 3 nodes (0-2)
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 45 46 47 48 49 50 51 52 53 54 55
  56 57 58 59
  node 0 size: 32394 MB
  node 0 free: 27218 MB
  node 1 cpus: 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 60 61 62 63 64 65 66
  67 68 69 70 71 72 73 74
  node 1 size: 32768 MB
  node 1 free: 30014 MB
  node 2 cpus: 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 75 76 77 78 79 80 81
  82 83 84 85 86 87 88 89
  node 2 size: 16384 MB
  node 2 free: 16384 MB

But "cpu to node" and "node to cpu" links were not changed as follows:

  $ ls /sys/devices/system/cpu/cpu30/|grep node
  node0
  $ ls /sys/devices/system/node/node0/|grep cpu30
  cpu30

"numactl --hardware" shows that cpu30 belongs to node 2.  But sysfs
links does not change.

This patch changes "cpu to node" and "node to cpu" links when node
number changed by onlining CPU.
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PFN_PHYS() is a phys_addr_t, which can be u32 or u64.
Fix the build warning when phys_addr_t is u32.

  mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'unsigned int' [-Wformat]:  => 1685:3
  mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'unsigned int' [-Wformat]:  => 1685:3
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As pointed out by Andrew Morton, the swap-over-NFS writeback is not
setting PageWriteback before it is queued for direct IO.  While swap
pages do not participate in BDI or process dirty accounting and the IO
is synchronous, the writeback bit is still required and not setting it
in this case was an oversight.  swapoff depends on the page writeback to
synchronoise all pending writes on a swap page before it is reused.
Swapcache freeing and reuse depend on checking the PageWriteback under
lock to ensure the page is safe to reuse.

Direct IO handlers and the direct IO handler for NFS do not deal with
PageWriteback as they are synchronous writes.  In the case of NFS, it
schedules pages (or a page in the case of swap) for IO and then waits
synchronously for IO to complete in nfs_direct_write().  It is
recognised that this is a slowdown from normal swap handling which is
asynchronous and uses a completion handler.  Shoving PageWriteback
handling down into direct IO handlers looks like a bad fit to handle the
swap case although it may have to be dealt with some day if swap is
converted to use direct IO in general and bmap is finally done away
with.  At that point it will be necessary to refit asynchronous direct
IO with completion handlers onto the swap subsystem.

As swapcache currently depends on PageWriteback to protect against
races, this patch sets PageWriteback under the page lock before queueing
it for direct IO.  It is cleared when the direct IO handler returns.  IO
errors are treated similarly to the direct-to-bio case except PageError
is not set as in the case of swap-over-NFS, it is likely to be a
transient error.

It was asked what prevents such a page being reclaimed in parallel.
With this patch applied, such a page will now be skipped (most of the
time) or blocked until the writeback completes.  Reclaim checks
PageWriteback under the page lock before calling try_to_free_swap and
the page lock should prevent the page being requeued for IO before it is
freed.

This and Jerome's related patch should considered for -stable as far
back as 3.6 when swap-over-NFS was introduced.

[akpm@linux-foundation.org: use pr_err_ratelimited()]
[akpm@linux-foundation.org: remove hopefully-unneeded cast in printk]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>	[3.6+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 62c230bc ("mm: add support for a filesystem to activate
swap files and use direct_IO for writing swap pages"), swap_writepage()
calls direct_IO on swap files.  However, in that case the page isn't
redirtied if I/O fails, and is therefore handled afterwards as if it has
been successfully written to the swap file, leading to memory corruption
when the page is eventually swapped back in.

This patch sets the page dirty when direct_IO() fails.  It fixes a
memory corruption that happened while using swap-over-NFS.
Signed-off-by: NJerome Marchand <jmarchan@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>	[3.6+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A memcg may livelock when oom if the process that grabs the hierarchy's
oom lock is never the first process with PF_EXITING set in the memcg's
task iteration.

The oom killer, both global and memcg, will defer if it finds an
eligible process that is in the process of exiting and it is not being
ptraced.  The idea is to allow it to exit without using memory reserves
before needlessly killing another process.

This normally works fine except in the memcg case with a large number of
threads attached to the oom memcg.  In this case, the memcg oom killer
only gets called for the process that grabs the hierarchy's oom lock;
all others end up blocked on the memcg's oom waitqueue.  Thus, if the
process that grabs the hierarchy's oom lock is never the first
PF_EXITING process in the memcg's task iteration, the oom killer is
constantly deferred without anything making progress.

The fix is to give PF_EXITING processes access to memory reserves so
that we've marked them as oom killed without any iteration.  This allows
__mem_cgroup_try_charge() to succeed so that the process may exit.  This
makes the memcg oom killer exemption for TIF_MEMDIE tasks, now
immediately granted for processes with pending SIGKILLs and those in the
exit path, to be equivalent to what is done for the global oom killer.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current implementation of huge zero page uses pfn value 0 to indicate
that the page hasn't allocated yet.  It assumes that buddy page
allocator can't return page with pfn == 0.

Let's rework the code to store 'struct page *' of huge zero page, not
its pfn.  This way we can avoid the weak assumption.

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This might cause a use-after-free bug.
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two convenient ways to report errors to userspace

1) retun error to original syscall for example write(2)
2) mark mapping with error flag and return it on later fsync(2)

Second one is broken if (mapping->nrpages == 0) This is real-life
situation because after error pages are likey to be truncated or
invalidated.

We have to return an error regardless to number of pages in the mapping.

#Original testcase: git@github.com:dmonakhov/xfstests.git
MOUNT_OPTIONS="-b1024"
./check shared/305
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no comment for parameter nid of memblock_insert_region().
This patch adds comment for it.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nr_pages is not used in pages_correctly_reserved().
So remove it.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Reviewed-by: NWen Congyang <wency@cn.fujitsu.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>