- 08 9月, 2014 21 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "This pull request includes Alban's patch to disallow '\n' in cgroup names. Two other patches from Li to fix a possible oops when cgroup destruction races against other file operations and one from Vivek to fix a unified hierarchy devel behavior" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: check cgroup liveliness before unbreaking kernfs cgroup: delay the clearing of cgrp->kn->priv cgroup: Display legacy cgroup files on default hierarchy cgroup: reject cgroup names with '\n'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
Pull percpu fixes from Tejun Heo: "One patch to fix a failure path in the alloc path. The bug is dangerous but probably not too likely to actually trigger in the wild given that there hasn't been any report yet. The other two are low impact fixes" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: free percpu allocation info for uniprocessor system percpu: perform tlb flush after pcpu_map_pages() failure percpu: fix pcpu_alloc_pages() failure path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Two patches are to add PCI IDs for ICH9 and all others are device specific fixes. Nothing too interesting" * 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver. ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware. ahci: add pcid for Marvel 0x9182 controller ata: Disabling the async PM for JMicron chip 363/361 ata_piix: Add Device IDs for Intel 9 Series PCH ahci: Add Device IDs for Intel 9 Series PCH ata: ahci_tegra: Read calibration fuse
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix skb leak in mac802154, from Martin Townsend 2) Use select not depends on NF_NAT for NFT_NAT, from Pablo Neira Ayuso 3) Fix union initializer bogosity in vxlan, from Gerhard Stenzel 4) Fix RX checksum configuration in stmmac driver, from Giuseppe CAVALLARO 5) Fix TSO with non-accelerated VLANs in e1000, e1000e, bna, ehea, i40e, i40evf, mvneta, and qlge, from Vlad Yasevich 6) Fix capability checks in phy_init_eee(), from Giuseppe CAVALLARO 7) Try high order allocations more sanely for SKBs, specifically if a high order allocation fails, fall back directly to zero order pages rather than iterating down one order at a time. From Eric Dumazet 8) Fix a memory leak in openvswitch, from Li RongQing 9) amd-xgbe initializes wrong spinlock, from Thomas Lendacky 10) RTNL locking was busted in setsockopt for anycast and multicast, fix from Sabrina Dubroca 11) Fix peer address refcount leak in ipv6, from Nicolas Dichtel 12) DocBook typo fixes, from Masanari Iida * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits) ipv6: restore the behavior of ipv6_sock_ac_drop() amd-xgbe: Enable interrupts for all management counters amd-xgbe: Treat certain counter registers as 64 bit greth: moved TX ring cleaning to NAPI rx poll func cnic : Cleanup CONFIG_IPV6 & VLAN check net: treewide: Fix typo found in DocBook/networking.xml bnx2x: Fix link problems for 1G SFP RJ45 module 3c59x: avoid panic in boomerang_start_xmit when finding page address: netfilter: add explicit Kconfig for NETFILTER_XT_NAT ipv6: use addrconf_get_prefix_route() to remove peer addr ipv6: fix a refcnt leak with peer addr net-timestamp: only report sw timestamp if reporting bit is set drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macros l2tp: fix race while getting PMTU on PPP pseudo-wire ipv6: fix rtnl locking in setsockopt for anycast and multicast VMXNET3: Check for map error in vmxnet3_set_mc openvswitch: distinguish between the dropped and consumed skb amd-xgbe: Fix initialization of the wrong spin lock openvswitch: fix a memory leak netfilter: fix missing dependencies in NETFILTER_XT_TARGET_LOG ...
-
由 Beniamino Galvani 提交于
The mdio-sun4i driver automatically selects REGULATOR and REGULATOR_FIXED_VOLTAGE because it uses the regulator API. But a driver selecting a subsystem increases the chance of generating circular Kconfig dependencies, especially when other drivers depend on the selected symbol. Since the regulator API functions are replaced with no-ops when REGULATOR is disabled, the driver can be built successfully even without regulator support and so those 'select' dependencies can be safely dropped. Suggested-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== pull request: wireless 2014-09-05 Please pull this batch of fixes intended for the 3.17 stream... For the mac80211 bits, Johannes says: "Here are a few fixes for mac80211. One has been discussed for a while and adds a terminating NUL-byte to the alpha2 sent to userspace, which shouldn't be necessary but since many places treat it as a string we couldn't move to just sending two bytes. In addition to that, we have two VLAN fixes from Felix, a mesh fix, a fix for the recently introduced RX aggregation offload, a revert for a broken patch (that luckily didn't really cause any harm) and a small fix for alignment in debugfs." For the iwlwifi bits, Emmanuel says: "I revert a patch that disabled CTS to self in dvm because users reported issues. The revert is CCed to stable since the offending patch was sent to stable too. I also bump the firmware API versions since a new firmware is coming up. On top of that, Marcel fixes a bug I introduced while fixing a bug in our Kconfig file." Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
It is possible that the interface is already gone after joining the list of anycast on this interface as we don't hold a refcount for the device, in this case we are safe to ignore the error. What's more important, for API compatibility we should not change this behavior for applications even if it were correct. Fixes: commit a9ed4a29 ("ipv6: fix rtnl locking in setsockopt for anycast and multicast") Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Andy Shevchenko 提交于
Instead of dereference each byte let's use %*ph specifier in the printk() calls. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudip Mukherjee 提交于
new link for - How to piss off a Linux kernel subsystem maintainer Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Bolle 提交于
The NFS/RDMA Kconfig symbol was split into separate options for client and server in commit 2e8c12e1 ("xprtrdma: add separate Kconfig options for NFSoRDMA client and server support"). Update the documentation to reflect this split. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: "J. Bruce Fields" <bfields@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masanari Iida 提交于
hpfall.c was renamed to freefall.c in 3.16, but this file still refer to hpfall.c instead of freefall.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
The example code provided with the i2c device interface documentation won't compile since it uses the reserved word "register" to name a variable. The compiler fails with this error message: error: expected identifier or '(' before '=' token __u8 register = 0x20; /* Device register to access */ ^ Rename the variable "register" to simply "reg" in the example code. Another couple of typos has been fixed as well. [Change "! =" to "!=".] Signed-off-by: NJose Alarcon Roldan <jose.alarcon.roldan@gmail.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rob Jones 提交于
Despite the fact that these functions have been around for years, they are little used (only 15 uses in 13 files at the preseht time) even though many other files use work-arounds to achieve the same result. By documenting them, hopefully they will become more widely used. Signed-off-by: NRob Jones <rob.jones@codethink.co.uk> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: "These are regression fixes (ACPI sysfs, ACPI video, suspend test), ACPI cpuidle deadlock fix, missing runtime validation of ACPI _DSD output, a fix and a new CPU ID for the RAPL driver, new blacklist entry for the ACPI EC driver and a couple of trivial cleanups (intel_pstate and generic PM domains). Specifics: - Fix for recently broken test_suspend= command line argument (Rafael Wysocki). - Fixes for regressions related to the ACPI video driver caused by switching the default to native backlight handling in 3.16 from Hans de Goede. - Fix for a sysfs attribute of ACPI device objects that returns stale values sometimes due to the fact that they are cached instead of executing the appropriate method (_SUN) every time (broken in 3.14). From Yasuaki Ishimatsu. - Fix for a deadlock between cpuidle_lock and cpu_hotplug.lock in the ACPI processor driver from Jiri Kosina. - Runtime output validation for the ACPI _DSD device configuration object missing from the support for it that has been introduced recently. From Mika Westerberg. - Fix for an unuseful and misleading RAPL (Running Average Power Limit) domain detection message in the RAPL driver from Jacob Pan. - New Intel Haswell CPU ID for the RAPL driver from Jason Baron. - New Clevo W350etq blacklist entry for the ACPI EC driver from Lan Tianyu. - Cleanup for the intel_pstate driver and the core generic PM domains code from Gabriele Mazzotta and Geert Uytterhoeven" * tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock ACPI / scan: not cache _SUN value in struct acpi_device_pnp cpufreq: intel_pstate: Remove unneeded variable powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f PM / domains: Make generic_pm_domain.name const PM / sleep: Fix test_suspend= command line option ACPI / EC: Add msi quirk for Clevo W350etq ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.
-
由 Tom Lendacky 提交于
A previous patch inadvertently deleted a declaration in the amd_xgbe_an_tx_training function causing the build to fail. Add the declaration for 'priv' back to the function. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull filesystem fixes from Al Viro: "Several bugfixes (all of them -stable fodder). Alexey's one deals with double mutex_lock() in UFS (apparently, nobody has tried to test "ufs: sb mutex merge + mutex_destroy" on something like file creation/removal on ufs). Mine deal with two kinds of umount bugs, in umount propagation and in handling of automounted submounts, both resulting in bogus transient EBUSY from umount" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix deadlocks introduced by sb mutex merge fix EBUSY on umount() from MNT_SHRINKABLE get rid of propagate_umount() mistakenly treating slaves as busy.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU fix from Ingo Molnar: "A boot hang fix for the offloaded callback RCU model (RCU_NOCB_CPU=y && (TREE_CPU=y || TREE_PREEMPT_RC)) in certain bootup scenarios" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Make nocb leader kthreads process pending callbacks after spawning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "Three fixlets from the timer departement: - Update the timekeeper before updating vsyscall and pvclock. This fixes the kvm-clock regression reported by Chris and Paolo. - Use the proper irq work interface from NMI. This fixes the regression reported by Catalin and Dave. - Clarify the compat_nanosleep error handling mechanism to avoid future confusion" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Update timekeeper before updating vsyscall and pvclock compat: nanosleep: Clarify error handling nohz: Restore NMI safe local irq work for local nohz kick
-
由 Alexey Khoroshilov 提交于
Commit 0244756e ("ufs: sb mutex merge + mutex_destroy") introduces deadlocks in ufs_new_inode() and ufs_free_inode(). Most callers of that functions acqure the mutex by themselves and ufs_{new,free}_inode() do that via lock_ufs(), i.e we have an unavoidable double lock. The patch proposes to resolve the issue by making sure that ufs_{new,free}_inode() are not called with the mutex held. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org # 3.16 Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
- 07 9月, 2014 6 次提交
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm fixes from Paolo Bonzini: "A smattering of bug fixes across most architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm/cma: Fix panic introduces by signed shift operation KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags KVM: s390/mm: Fix storage key corruption during swapping arm/arm64: KVM: Complete WFI/WFE instructions ARM/ARM64: KVM: Nuke Hyp-mode tlbs before enabling MMU KVM: s390/mm: try a cow on read only pages for key ops KVM: s390: Fix user triggerable bug in dead code
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Kevin Hilman: "Another round of fixes from arm-soc land, which are mostly DT fixes for: - OMAP: handful of DT fixes devices on newly supported hardware - davinci: fix 2nd EDMA channel - ux500: extend previous pinctrl fix to another board - at91: clock registration fixes, compatibility string precision And one more fix for event cleanup in drivers/bus/arm-ccn" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Move event cleanup routine ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver ARM: dts: dra7-evm: Add vtt regulator support ARM: dts: dra7-evm: Fix spi1 mux documentation ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am4372: fix USB regs size ARM: dts: am437x-gp: switch i2c0 to 100KHz ARM: dts: dra7-evm: Fix 8th NAND partition's name ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency ARM: ux500: disable msp2 node on Snowball ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-09-06 This series contains updates to e1000 and igb. Krzysztof provides a patch to cleanup the coding style in e1000 to quiet checkpatch.pl warnings. Todd adds two boolean flags to igb to allow for changes in the advertised EEE speeds from ethtool. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
The TCP_SKB_CB(skb)->when field no longer exists as of recent change 7faee5c0 ("tcp: remove TCP_SKB_CB(skb)->when"). And in any case, tcp_fragment() is called on already-transmitted packets from the __tcp_retransmit_skb() call site, so copying timestamps of any kind in this spot is quite sensible. Signed-off-by: NNeal Cardwell <ncardwell@google.com> Reported-by: NYuchung Cheng <ycheng@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs fixes from Dave Chinner: "The fixes all address recently discovered data corruption issues. The original Direct IO issue was discovered by Chris Mason @ Facebook on a production workload which mixed buffered reads with direct reads and writes IO to the same file. The fix for that exposed other issues with page invalidation (exposed by millions of fsx operations) failing due to dirty buffers beyond EOF. Finally, the collapse_range code could also cause problems due to racing writeback changing the extent map while it was being shifted around. The commits for that problem are simple mitigation fixes that prevent the problem from occuring. A more robust fix for 3.18 that addresses the underlying problem is currently being worked on by Brian. Summary of fixes: - a direct IO read/buffered read data corruption - the associated fallout from the DIO data corruption fix - collapse range bugs that are potential data corruption issues" * tag 'xfs-for-linus-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: trim eofblocks before collapse range xfs: xfs_file_collapse_range is delalloc challenged xfs: don't log inode unless extent shift makes extent modifications xfs: use ranged writeback and invalidation for direct IO xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't dirty buffers beyond EOF
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull mtd fixes from Brian Norris: "Two trivial MTD updates for 3.17-rc4: - a tiny comment tweak, to kill a bunch of DocBook warnings added during the merge window - a small fixup to the OTP routines' error handling" * tag 'for-linus-20140905' of git://git.infradead.org/linux-mtd: mtd: nand: fix DocBook warnings on nand_sdr_timings doc mtd: cfi_cmdset_0002: check return code for get_chip()
-
- 06 9月, 2014 13 次提交
-
-
由 Todd Fujinaka 提交于
Change e1000_set_eee and e1000_set_eee_i35(0|4) to allow changes in the advertised EEE speeds from ethtool. Adds two boolean flags to e1000_set_eee_i35(0|4) to pass in advertised speed data. Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Thomas Gleixner 提交于
The update_walltime() code works on the shadow timekeeper to make the seqcount protected region as short as possible. But that update to the shadow timekeeper does not update all timekeeper fields because it's sufficient to do that once before it becomes life. One of these fields is tkr.base_mono. That stays stale in the shadow timekeeper unless an operation happens which copies the real timekeeper to the shadow. The update function is called after the update calls to vsyscall and pvclock. While not correct, it did not cause any problems because none of the invoked update functions used base_mono. commit cbcf2dd3 (x86: kvm: Make kvm_get_time_and_clockread() nanoseconds based) changed that in the kvm pvclock update function, so the stale mono_base value got used and caused kvm-clock to malfunction. Put the update where it belongs and fix the issue. Reported-by: NChris J Arges <chris.j.arges@canonical.com> Reported-by: NPaolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1409050000570.3333@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
The error handling in compat_sys_nanosleep() is correct, but completely non obvious. Document it and restrict it to the -ERESTART_RESTARTBLOCK return value for clarity. Reported-by: NKees Cook <keescook@chromium.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
Fixed many errors/warnings and checks in e1000_ethtool.c reported by checkpatch.pl. Suggestions from Joe Perches and Alexander Duyck applied as well Signed-off-by: NKrzysztof Majzerowicz-Jaszcz <cristos@vipserv.org> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 David S. Miller 提交于
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver fixes 2014-09-05 The following series of patches includes fixes to the driver. - Proper access to 64 bit management counter registers - Enable all management counter registers to generate an interrupt when the counter threshold is reached This patch series is based on net. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
As the management counters reach a threshold they will generate an interrupt so the value can be saved and the counter reset. The current code does not enable this interrupt on all counters. This can result in inaccurate statistics. Update the code to enable all the counters to generate an interrupt when its threshold is exceeded. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Even if the management counters are configured to be 32 bit register values, the [rt]xoctetcount_gb and [rt]xoctetcount_g counters are always 64 bit counter registers. Since they are not being treated as 64 bit values, these statistics are being reported incorrectly (ifconfig, ethtool, etc.). Update the routines used to read the registers to access the "hi" register (an offset of 4 from the "lo" register) to create a 64 bit value for these 64 bit counters. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Use the new fancy eth_get_headlen() to pull exactly the headers into skb->head. This speeds up GRE traffic (or more generally tunneled traffuc), as GRO can aggregate up to 17 MSS per GRO packet instead of 8. (Pulling too much data was forcing GRO to keep 2 frags per MSS) Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Amir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
The DSP_NEVER_DEFINED #ifdef is confusing, it slips in an extra } which is not required because the previous code is indented incorrectly. Correct the identation and remove the extraneous DSP_NEVER_DEFINED Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Hellstrom 提交于
This patch does not affect the 10/100 GRETH MAC. Before all GBit GRETH TX descriptor ring cleaning was done in start_xmit(), when descriptor list became full it activated TX interrupt to start the NAPI rx poll function to do TX ring cleaning. With this patch the TX descriptor ring is always cleaned from the NAPI rx poll function, triggered via TX or RX interrupt. Otherwise we could end up in TX frames being sent but not reported to the stack being sent. On the 10/100 GRETH this is not an issue since the SKB is copied&aligned into private buffers so that the SKB can be freed directly on start_xmit() Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anish Bhatt 提交于
The cnic module needs to ensure that if ipv6 support is compiled as a module, then the cnic module cannot be compiled as built-in as it depends on ipv6. Made this check cleaner via Kconfig Use simpler IS_ENABLED for CONFIG_VLAN_8021Q check Signed-off-by: NAnish Bhatt <anish@chelsio.com> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Suman Tripathi 提交于
ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver. Due to HW errata the APM X-Gene AHCI SATA host controller reports link down even if the device presence is detected. This issue is due to speed negotiation failure. This patch implements the algorithm to retry the COMRESET if PxSTAT register reports device presence detected but PHY communication not established. The maximum retry attempts are 3. This patch also fixes the code to match the algorithm for the printing a warning message if the disparity error still exists after link up. Signed-off-by: NLoc Ho <lho@apm.com> Signed-off-by: NSuman Tripathi <stripathi@apm.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-