- 21 3月, 2018 9 次提交
-
-
由 Rex Zhu 提交于
caused by 'commit 83e3c4615872 ("drm/amdgpu: Remove wrapper layer of smu ip functions")' BUG: unable to handle kernel NULL pointer dereference at 00000000000005d8 [ 313.241459] IP: ci_dpm_read_sensor+0x37/0xf0 [amdgpu] Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> -
由 Rex Zhu 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Mikita Lipski 提交于
By moving amdgpu_irq_disable_all earlier in the sequence fixes an issue with disabling pflip interrupts: *ERROR* dal_irq_service_dummy_ack: called for non-implemented irq source Earlier patch fixed a memory corruption and revealed irq warnings.This way it seems to be there no obvious issues with unloading the module. Signed-off-by: NMikita Lipski <mikita.lipski@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Mikita Lipski 提交于
Disable irq on devices before destroying them. That prevents use-after-free memory access when unloading the driver. Signed-off-by: NMikita Lipski <mikita.lipski@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Mikita Lipski 提交于
This change fixes the deadlock when unloading the driver with displays connected. Signed-off-by: NMikita Lipski <mikita.lipski@amd.com> Reviewed-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tom St Denis 提交于
The offset inside the page wasn't included in the copy call meaning the start of the page was being read/written instead. Reported-by: NJay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: NTom St Denis <tom.stdenis@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
PCIE_INDEX2/DATA2 pair will be used for smn register accessing since from vega. PCIE_INDEX/DATA pair should be reserved for smu Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Add kernel doc for the functions in amdgpu_device.c Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> -
由 Alex Deucher 提交于
Need to be able to query the VCN firmware version from userspace to determine supported features, etc. Reviewed-by: NHuang Rui <ray.huang@amd.com> Acked-by: NLeo Liu <leo.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 20 3月, 2018 2 次提交
-
-
由 Rex Zhu 提交于
use asic's callback function get_xclk in amdgpu v2: squash in removal of leftover debug info (drm/amd/pp: Delete debug info in smu7_hwmgr.c) (Rex) Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 17 3月, 2018 1 次提交
-
-
由 Rex Zhu 提交于
Refine commit f49e9bac ("drm/amd/pp: Get and save Rv smu version") Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 3月, 2018 1 次提交
-
-
由 Andrey Grodzovsky 提交于
and amdgpu_bo_create_reserved. Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 3月, 2018 27 次提交
-
-
由 Rex Zhu 提交于
make it symmetric with amdgpu_ucode_init_bo in amd_powerplay.c refine the "commit b22558bb4ff8fc9fe925222f90297d7a03a5fb20" Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
1. delete amdgpu_powerplay.c used for wrapping smu ip functions 2. delete struct pp_instance, 3. make struct hwmgr as the smu hw handle. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Feifei Xu 提交于
Remove mmhub header files inclusion which not used. Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Rather then relying on the asic type for the second instance. Makes it more consistent with the rest of the code. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
-
由 Michel Dänzer 提交于
Turning off the sink in this case causes various issues, because userspace expects it to stay on until it turns it off explicitly. Instead, turn the sink off and back on when a display is connected again. This dance seems necessary for link training to work correctly. Bugzilla: https://bugs.freedesktop.org/105308 Cc: stable@vger.kernel.org Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
No need to replicate it in several places. Reviewed-by: NRex Zhu <rezhu@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Regardless of whether the user has selected psp fw loading or not. It's still needed for GPU reset among other things. There are already guards in place to avoid setting up the full psp if PSP fw loading is not enabled. Reviewed-by: NRex Zhu <rezhu@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
The per device firmware load method is limited to what makes sense for that asic rather than whatever arbitrary value may have been set by the user. Reviewed-by: NRex Zhu <rezhu@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
No need to replicate it in several places. Reviewed-by: NRex Zhu <rezhu@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
We already checked and returned early in most of the IP functions, fill in the rest as well. Reviewed-by: NRex Zhu <rezhu@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Oak Zeng 提交于
This is preparation for sharing client ID definitions between amdgpu and amdkfd Signed-off-by: NOak Zeng <Oak.Zeng@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Harry Wentland 提交于
They were used by amdgpu_dm at some point but since it has its own amdgpu_dm_connector now these aren't needed anymore. Signed-off-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Save/restore the backlight level scratch register in S3/S4 so the backlight level comes back at the previously requested level. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047 Fixes: 4ec6ecf4 (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling) Acked-by: NMichel Dänzer <michel.daenzer@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> CC: stable@vger.kernel.org Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Drop the "kernel" and sg parameter and give the BO type to create explicit to amdgpu_bo_create instead of figuring it out from the parameters. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NRoger He <Hongbo.He@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Just set the GTT domain as mandatory, so that the BO is validated into it on first use. This allows us to setup the sg table later on. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NRoger He <Hongbo.He@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Instead of moving this to the SYSTEM domain just drop the backing store and let the resulting allocation be freed. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NRoger He <Hongbo.He@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Instead of calculating the size in bytes just to recalculate the number of pages from it pass the BO directly to the function. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NRoger He <Hongbo.He@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
this patch actually refactor mailbox implmentations, and all below changes are needed together to fix all those mailbox handshake issues exposured by heavey TDR test. 1)refactor all mailbox functions based on byte accessing for mb_control reason is to avoid touching non-related bits when writing trn/rcv part of mailbox_control, this way some incorrect INTR sent to hypervisor side could be avoided, and it fixes couple handshake bug. 2)trans_msg function re-impled: put a invalid logic before transmitting message to make sure the ACK bit is in a clear status, otherwise there is chance that ACK asserted already before transmitting message and lead to fake ACK polling. (hypervisor side have some tricks to workaround ACK bit being corrupted by VF FLR which hase an side effects that may make guest side ACK bit asserted wrongly), and clear TRANS_MSG words after message transferred. 3)for mailbox_flr_work, it is also re-worked: it takes the mutex lock first if invoked, to block gpu recover's participate too early while hypervisor side is doing VF FLR. (hypervisor sends FLR_NOTIFY to guest before doing VF FLR and sentds FLR_COMPLETE after VF FLR done, and the FLR_NOTIFY will trigger interrupt to guest which lead to mailbox_flr_work being invoked) This can avoid the issue that mailbox trans msg being cleared by its VF FLR. 4)for mailbox_rcv_irq IRQ routine, it should only peek msg and schedule mailbox_flr_work, instead of ACK to hypervisor itself, because FLR_NOTIFY msg sent from hypervisor side doesn't need VF's ACK (this is because VF's ACK would lead to hypervisor clear its trans_valid/msg, and this would cause handshake bug if trans_valid/msg is cleared not due to correct VF ACK but from a wrong VF ACK like this "FLR_NOTIFY" one) This fixed handshake bug that sometimes GUEST always couldn't receive "READY_TO_ACCESS_GPU" msg from hypervisor. 5)seperate polling time limite accordingly: POLL ACK cost no more than 500ms POLL MSG cost no more than 12000ms POLL FLR finish cost no more than 500ms 6) we still need to set adev into in_gpu_reset mode after we received FLR_NOTIFY from host side, this can prevent innocent app wrongly succesed to open amdgpu dri device. FLR_NOFITY is received due to an IDLE hang detected from hypervisor side which indicating GPU is already die in this VF. v2: use MACRO as the offset of mailbox_control register don't test if NOTIFY_CMPL event in rcv_msg since it won't recieve that message anymore Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NPixel Ding <Pixel.Ding@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
mailbox registers can be accessed with a byte boundry according to BIF team, so this patch prepares register byte access and will be used by following patches. Actually, for mailbox registers once the byte field is touched even not changed, the mailbox behaves, so we need the byte width accessing to those sort of regs. Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NPixel Ding <Pixel.Ding@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
The vram type for dGPU is stored in umc_info while sys mem type for APU is stored in integratedsysteminfo Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tom St Denis 提交于
The commit d296278fd372003fc69588acfd0c0c5edbdf4874 added support for detecting DDR4 but omitted the label that is printed out in amdgpu_bo_init() resulting in a KASAN error. Signed-off-by: NTom St Denis <tom.stdenis@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Emily Deng 提交于
The amdgpu_ucode_fini_bo should be called after gfx_v8_0_hw_fini, or it will have KCQ disable failed issue. For Tonga, as it firstly finishes SMC block, and the SMC hw fini will call amdgpu_ucode_fini, which will lead the amdgpu_ucode_fini_bo called before gfx_v8_0_hw_fini, this is incorrect. Signed-off-by: NEmily Deng <Emily.Deng@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Emily Deng 提交于
The amdgpu_pm_sysfs_fini should call before amdgpu_device_ip_fini, or the adev->pm.dpm_enabled would be set to 0, then the device files related to pp won't be removed by amdgpu_pm_sysfs_fini when unload driver. Signed-off-by: NEmily Deng <Emily.Deng@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
We don't need the page array for prime shared BOs, stop allocating it. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NRoger He <Hongbo.He@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-