First, SLAB_PANIC is unjustified. Second, all error propagating and backing out
is in place.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETLABEL]: Fix build failure.
  [IPV6]: Give sit driver an appropriate module alias.
  [IPV6]: Add ndisc_netdev_notifier unregister.
  [NET]: __alloc_pages() failures reported due to fragmentation
  [PKTGEN]: TCI endianness fixes
  [TG3]: Fix 2nd ifup failure on 5752M.
  [NETFILTER] bug: skb->protocol is already net-endian
  [NETFILTER] bug: nfulnl_msg_config_mode ->copy_range is 32bit
  [NETFILTER] bug: NFULA_CFG_QTHRESH uses 32bit
  [IPV6]: Fix ECN bug on big-endian
  [IPX]: Annotate and fix IPX checksum
  [IPX]: Trivial parts of endianness annotations

When I added the entries for the robust futex syscall entries, I
forgot to bump NR_SYSCALLS.  The current situation is error-prone
because NR_SYSCALLS lives in entry.S where the system call limit
checks are enforced.  Move the definition to asm/unistd.h in order to
make this mistake much more difficult to make.

And wire up sys_migrate_pages since the powerpc folks implemented the
compat wrapper for us.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

> the build with the attached .config failed, make ends with:
> ...
> : undefined reference to `cipso_v4_sock_getattr'
> net/built-in.o: In function `netlbl_socket_getattr':

 ...

It looks like I was stupid and made NetLabel depend on CONFIG_NET and not
CONFIG_INET, the patch below should fix this by making NetLabel depend on
CONFIG_INET and CONFIG_SECURITY.  Please review and apply for 2.6.19.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It would be nice to keep things working even with this built as a
module, it took me some time to realize my IPv6 tunnel was broken
because of the missing sit module. This module alias fixes things
until distributions have added an appropriate alias to modprobe.conf.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If inet6_init() fails later than ndisc_init() call, or IPv6 module is
unloaded, ndisc_netdev_notifier call remains in the list and will follows in
oops later.
Signed-off-by: NDmitry Mishin <dim@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have seen a couple of __alloc_pages() failures due to
fragmentation, there is plenty of free memory but no large order pages
available.  I think the problem is in sock_alloc_send_pskb(), the
gfp_mask includes __GFP_REPEAT but its never used/passed to the page
allocator.  Shouldnt the gfp_mask be passed to alloc_skb() ?
Signed-off-by: NLarry Woodman <lwoodman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

open-coded variant there works only for little-endian
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a bug reported in:

http://bugzilla.kernel.org/show_bug.cgi?id=7438

tg3_close() turns off the PHY if WoL and ASF are both disabled.  On
the next tg3_open(), some devices such as the 5752M will not be
brought up correctly without a PHY reset early in the reset sequence.
The PHY clock is needed for some internal MAC blocks to function
correctly.

This problem is fixed by always resetting the PHY early in
tg3_reset_hw() when it is called from tg3_open() or tg3_resume().
tg3_setup_phy() can then be called later in the sequence without the
reset_phy parameter set to 1, since the PHY reset is already done.

Update version to 3.68.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

htons() is not needed (and no, it's not misspelled ntohs() -
userland expects net-endian here).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__constant_htons(2<<4) is not a replacement for
htonl(2<<20).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calculation of IPX checksum got buggered about 2.4.0.  The old variant
mangled the packet; that got fixed, but calculation itself got buggered.
Restored the correct logics, fixed a subtle breakage we used to have even
back then: if the sum is 0 mod 0xffff, we want to return 0, not 0xffff.
The latter has special meaning for IPX (cheksum disabled).  Observation
(and obvious fix) nicked from history of FreeBSD ipx_cksum.c...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The previous commit (45c18b0b, aka "Fix
unlikely (but possible) race condition on task->user access") fixed a
potential oops due to __sigqueue_alloc() getting its "user" pointer out
of sync with switch_user(), and accessing a user pointer that had been
de-allocated on another CPU.

It still left another (much less serious) problem, where a concurrent
__sigqueue_alloc and swich_user could cause sigqueue_alloc to do signal
pending reference counting for a _different_ user than the one it then
actually ended up using.  No oops, but we'd end up with the wrong signal
accounting.

Another case of Oleg's eagle-eyes picking up the problem.

This is trivially fixed by just making sure we load whichever "user"
structure we decide to use (it doesn't matter _which_ one we pick, we
just need to pick one) just once.
Acked-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's a possible race condition when doing a "switch_uid()" from one
user to another, which could race with another thread doing a signal
allocation and looking at the old thread ->user pointer as it is freed.

This explains an oops reported by Lukasz Trabinski:
	http://permalink.gmane.org/gmane.linux.kernel/462241

We fix this by delaying the (reference-counted) freeing of the user
structure until the thread signal handler lock has been released, so
that we know that the signal allocation has either seen the new value or
has properly incremented the reference count of the old one.

Race identified by Oleg Nesterov.

Cc: Lukasz Trabinski <lukasz@wsisiz.edu.pl>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit 5a06a363 ("[PATCH] ipc/msg.c:
clean up coding style") breaks fakeroot on Alpha (variously hangs or
oopses), according to a report by Falk Hueffner.

The fact that the code seems to rely on compiler access ordering through
the use of "volatile" is a pretty certain sign that the code has locking
problems, and we should fix those properly and then remove the whole
"volatile" entirely.

But in the meantime, the movement of "volatile" was unintentional, and
should be reverted.

Cc: Falk Hueffner <falk@debian.org>
Cc: Andrew Morton <akpm@osdl.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After the inode slimming patch that unionised i_pipe/i_bdev/i_cdev, it's
no longer enough to check for existance of ->i_pipe to verify that this
is a pipe.

Original patch from Eric Dumazet <dada1@cosmosbay.com>
Final solution suggested by Linus.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: Remove redundant xattr permission checking

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Let PCI_MULTITHREAD_PROBE depend on BROKEN
  PCI: Revert "PCI: i386/x86_84: disable PCI resource decode on device disable"

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: use MII hooks only if CONFIG_MII is enabled
  USB Storage: unusual_devs.h entry for Sony Ericsson P990i
  USB: xpad: additional USB id's added
  USB: fix compiler issues with newer gcc versions
  USB: HID: add blacklist AIRcable USB, little beautification
  USB: usblp: fix system suspend for some systems
  USB: failure in usblp's error path
  usbtouchscreen: use endpoint address from endpoint descriptor
  USB: sierra: Fix id for Sierra Wireless MC8755 in new table
  USB: new VID/PID-combos for cp2101
  hid-core: big-endian fix fix
  USB: usb-storage: Unusual_dev update
  USB: add another sierra wireless device id

The user.* extended attributes are only allowed on regular files and
directories.  Sticky directories further restrict write access to the owner
and privileged users.  (See the attr(5) man page for an explanation.)

The original check in ext2/ext3 when user.* xattrs were merged was more
restrictive than intended, and when the xattr permission checks were moved
into the VFS, read access to user.* attributes on sticky directores ended
up being denied in addition.

Originally-from: Gerard Neil <xyzzy@devferret.org>
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sys_move_pages() uses vmalloc() to allocate an array of structures that is
fills with information passed from user mode and then passes to
do_stat_pages() (in the case the node list is NULL).  do_stat_pages()
depends on a marker in the node field of the structure to decide how large
the array is and this marker is correctly inserted into the last element of
the array.  However, vmalloc() doesn't zero the memory it allocates and if
the user passes NULL for the node list, then the node fields are not filled
in (except for the end marker).  If the memory the vmalloc() returned
happend to have a word with the marker value in it in just the right place,
do_pages_stat will fail to fill the status field of part of the array and
we will return (random) kernel data to user mode.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for PATA controllers of MCP67 to amd74xx.c.
Signed-off-by: NPeer Chen <pchen@nvidia.com>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

getdelays reports a "fatal reply error, errno 258". We don't have enough room
for multi-threaded exit (PID + TGID).
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

spin_lock_irq{save,restore} is incorrectly called here (the function can
sleep after acquring the lock).

done the necessary corrections and removed unwanted cli/sti.
Signed-off-by: NAmol Lad <amol@verismonetworks.com>
Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is needed on bigendian 64bit architectures.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In order to get the __NR_* constants, we need sys/syscall.h.
linux/unistd.h works as well since it includes syscall.h, however syscall.h
is more parsimonious.  We were inconsistent in this, and this patch adds
syscall.h includes where necessary and removes linux/unistd.h includes
where they are not needed.

asm/unistd.h also includes the __NR_* constants, but these are not the
glibc-sanctioned ones, so this also removes one such inclusion.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a UML hang in which everything would just stop until some I/O happened
- a ping, someone whacking the keyboard - at which point everything would
start up again as though nothing had happened.

The cause was gcc reordering some code which absolutely needed to be
executed in the order in the source.  When unblock_signals switches signals
from off to on, it needs to see if any interrupts had happened in the
critical section.  The interrupt handlers check signals_enabled - if it is
zero, then the handler adds a bit to the "pending" bitmask and returns.
unblock_signals checks this mask to see if any signals need to be
delivered.

The crucial part is this:
	signals_enabled = 1;
	save_pending = pending;
	if(save_pending == 0)
		return;
	pending = 0;

In order to avoid an interrupt arriving between reading pending and setting
it to zero, in which case, the record of the interrupt would be erased,
signals are enabled.

What happened was that gcc reordered this so that 'save_pending = pending'
came before 'signals_enabled = 1', creating a one-instruction window within
which an interrupt could arrive, set its bit in pending, and have it be
immediately erased.

When the I/O workload is purely disk-based, the loss of a block device
interrupt stops the entire I/O system because the next block request will
wait for the current one to finish.  Thus the system hangs until something
else causes some I/O to arrive, such as a network packet or console input.

The fix to this particular problem is a memory barrier between enabling
signals and reading the pending signal mask.  An xchg would also probably
work.

Looking over this code for similar problems led me to do a few more
things:

- make signals_enabled and pending volatile so that they don't get cached
  in registers

- add an mb() to the return paths of block_signals and unblock_signals so
  that the modification of signals_enabled doesn't get shuffled into the
  caller in the event that these are inlined in the future.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Callers after reiserfs_init_bitmap_cache() expect errval to contain -EINVAL
until much later.  If a condition fails before errval is reset later,
reiserfs_fill_super() will mistakenly return 0, causing an Oops in
do_add_mount().  This patch resets errval to -EINVAL after the call.

I view this as a temporary fix and real error codes should be used
throughout reiserfs_fill_super().
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

WARNING: vmlinux - Section mismatch: reference to .init.text:spi_register_board_info from __ksymtab_gpl between '__ksymtab_spi_register_board_info' (at offset 0xc032f7d0) and '__ksymtab_spi_alloc_master'

Fix this by removing the export.
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a swsusp debugging mode.  This does everything that's needed for a suspend
except for actually suspending.  So we can look in the log messages and work
out a) what code is being slow and b) which drivers are misbehaving.

(1)
# echo testproc > /sys/power/disk
# echo disk > /sys/power/state

This should turn off the non-boot CPU, freeze all processes, wait for 5
seconds and then thaw the processes and the CPU.

(2)
# echo test > /sys/power/disk
# echo disk > /sys/power/state

This should turn off the non-boot CPU, freeze all processes, shrink
memory, suspend all devices, wait for 5 seconds, resume the devices etc.

Cc: Pavel Machek <pavel@ucw.cz>
Cc: Stefan Seyfried <seife@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

WARNING: vmlinux - Section mismatch: reference to .init.data:acpi_noirq from .text between 'pcibios_penalize_isa_irq' (at offset 0xc026ffa1) and 'pirq_serverworks_get'
Acked-by: N"Brown, Len" <len.brown@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Apparently FUTEX_FD is unfixably racy and nothing uses it (or if it does, it
shouldn't).

Add a warning printk, give any remaining users six months to migrate off it.

Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

printk_ratelimit() has global state which makes it not useful for callers
which wish to perform ratelimiting at a particular frequency.

Add a printk_timed_ratelimit() which utilises caller-provided state storage to
permit more flexibility.

This function can in fact be used for things other than printk ratelimiting
and is perhaps poorly named.

Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It looks like there is a bug in init_reap_node() in slab.c that can cause
multiple oops's on certain ES7000 configurations.  The variable reap_node
is defined per cpu, but only initialized on a single CPU.  This causes an
oops in next_reap_node() when __get_cpu_var(reap_node) returns the wrong
value.  Fix is below.
Signed-off-by: NDan Yeisley <dan.yeisley@unisys.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: NChristoph Lameter <clameter@engr.sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Taken from http://bugzilla.kernel.org/show_bug.cgi?id=7439

It looks like device registration in drivers/char/ipmi/ipmi_si_intf.c was
cleaned up and a small error was made when setting the class_mask.  The fix
is simple as the correct mask value is defined in the code but is not used.
Acked-by: NCorey Minyard <minyard@acm.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When I was performing some operations on NFS, I got below error on server
side.

  =============================================
  [ INFO: possible recursive locking detected ]
  2.6.19-prep #1
  ---------------------------------------------
  nfsd4/3525 is trying to acquire lock:
   (&inode->i_mutex){--..}, at: [<c0611e5a>] mutex_lock+0x21/0x24

  but task is already holding lock:
   (&inode->i_mutex){--..}, at: [<c0611e5a>] mutex_lock+0x21/0x24

  other info that might help us debug this:
  2 locks held by nfsd4/3525:
   #0:  (client_mutex){--..}, at: [<c0611e5a>] mutex_lock+0x21/0x24
   #1:  (&inode->i_mutex){--..}, at: [<c0611e5a>] mutex_lock+0x21/0x24

  stack backtrace:
   [<c04051ed>] show_trace_log_lvl+0x58/0x16a
   [<c04057fa>] show_trace+0xd/0x10
   [<c0405913>] dump_stack+0x19/0x1b
   [<c043b6f1>] __lock_acquire+0x778/0x99c
   [<c043be86>] lock_acquire+0x4b/0x6d
   [<c0611ceb>] __mutex_lock_slowpath+0xbc/0x20a
   [<c0611e5a>] mutex_lock+0x21/0x24
   [<c047fd7e>] vfs_rmdir+0x76/0xf8
   [<f94b7ce9>] nfsd4_clear_clid_dir+0x2c/0x41 [nfsd]
   [<f94b7de9>] nfsd4_remove_clid_dir+0xb1/0xe8 [nfsd]
   [<f94b307b>] laundromat_main+0x9b/0x1c3 [nfsd]
   [<c04333d6>] run_workqueue+0x7a/0xbb
   [<c0433d0b>] worker_thread+0xd2/0x107
   [<c0436285>] kthread+0xc3/0xf2
   [<c0402005>] kernel_thread_helper+0x5/0xb
  ===================================================================

Cause for this problem was,2 successive mutex_lock calls on 2 diffrent inodes ,as shown below

	static int
	nfsd4_clear_clid_dir(struct dentry *dir, struct dentry *dentry)
	{
	        int status;

	        /* For now this directory should already be empty, but we empty it of
        	 * any regular files anyway, just in case the directory was created by
	         * a kernel from the future.... */
        	nfsd4_list_rec_dir(dentry, nfsd4_remove_clid_file);
	        mutex_lock(&dir->d_inode->i_mutex);
	        status = vfs_rmdir(dir->d_inode, dentry);
	...

	int vfs_rmdir(struct inode *dir, struct dentry *dentry)
	{
	        int error = may_delete(dir, dentry, 1);

	        if (error)
	                return error;

	        if (!dir->i_op || !dir->i_op->rmdir)
        	        return -EPERM;

	        DQUOT_INIT(dir);

	        mutex_lock(&dentry->d_inode->i_mutex);
	...

So I have developed the patch to overcome this problem.
Signed-off-by: NSrinivasa DS <srinivasa@in.ibm.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>