- 02 2月, 2015 19 次提交
-
-
由 Roopa Prabhu 提交于
This patch sets the NETIF_F_HW_SWITCH_OFFLOAD feature flag on rocker ports Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
This patch adds support to set/del bridge port attributes in hardware from the bridge driver. With this, when the user sends a bridge setlink message with no flags or master flags set, - the bridge driver ndo_bridge_setlink handler sets settings in the kernel - calls the swicthdev api to propagate the attrs to the switchdev hardware You can still use the self flag to go to the switch hw or switch port driver directly. With this, it also makes sure a notification goes out only after the attributes are set both in the kernel and hw. The patch calls switchdev api only if BRIDGE_FLAGS_SELF is not set. This is because the offload cases with BRIDGE_FLAGS_SELF are handled in the caller (in rtnetlink.c). Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
This patch adds two new api's netdev_switch_port_bridge_setlink and netdev_switch_port_bridge_dellink to offload bridge port attributes to switch port (The names of the apis look odd with 'switch_port_bridge', but am more inclined to change the prefix of the api to something else. Will take any suggestions). The api's look at the NETIF_F_HW_SWITCH_OFFLOAD feature flag to pass bridge port attributes to the port device. Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
bridge flags are needed inside ndo_bridge_setlink/dellink handlers to avoid another call to parse IFLA_AF_SPEC inside these handlers This is used later in this series Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
This is a high level feature flag for all switch asic offloads switch drivers set this flag on switch ports. Logical devices like bridge, bonds, vxlans can inherit this flag from their slaves/ports. The patch also adds the flag to NETIF_F_ONE_FOR_ALL, so that it gets propagated to the upperdevices (bridges and bonds). Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sonic Zhang 提交于
- In tx_hard_error_bump_tc interrupt, tc should be bumped only when current device instance is in DMA threshold mode. Check per device xstats.threshold other than global tc. - Set per device xstats.threshold to SF_DMA_MODE when current device instance is set to SF mode. v2-changes: - fix ident style Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
In commit dc9daab2 ("cxgb4: Added support in debugfs to dump sge_qinfo") a preprocessor check for CONFIG_CXGB4_DCB got added, which should have been CONFIG_CHELSIO_T4_DCB. After adding the right preprocessor, build fails due to missing function ethqset2pinfo. Fixing that as well. V2: Updated description since the patch also fixes build failure Reported-by: NPaul Bolle <pebolle@tiscal.nl> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Olivier Sobrie says: ==================== hso: fix some problems in the disconnect path These patches attempt to fix some problems I observed when the hso device is disconnected. Several patches of this serie are fixing crashes or memleaks when a hso device is disconnected. This serie of patches is based on v3.18. changes in v2: - Last patch of the serie dropped since another patch fix the issue. See http://marc.info/?l=linux-usb&m=142186699418489 for more info. - Added an extra patch avoiding name conflicts for the rfkill interface. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
By using only the usb interface number for the rfkill name, we might have a name conflicts in case two similar hso devices are connected. In this patch, the name of the hso rfkill interface embed the value of a counter that is incremented each time a new rfkill interface is added. Suggested-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
For hso serial devices, two cancel_work_sync were missing in the disconnect method. Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
The serial_table is used to map the minor number of the usb serial device to its associated context. The table is updated in the probe method and in hso_serial_ref_free() which is called either from the tty cleanup method or from the usb disconnect method. This patch ensures that the serial_table is updated in the disconnect method and no more from the cleanup method to avoid the following potential race condition. - hso_disconnect() is called for usb interface "x". Because the serial port was open and because the cleanup method of the tty_port hasn't been called yet, hso_serial_ref_free() is not run. - hso_probe() is called and fails for a new hso serial usb interface "y". The function hso_free_interface() is called and iterates over the element of serial_table to find the device associated to the usb interface context. If the usb interface context of usb interface "y" has been created at the same place as for usb interface "x", then the cleanup functions are called for usb interfaces "x" and "y" and hso_serial_ref_free() is called for both interfaces. - release_tty() is called for serial port linked to usb interface "x" and possibly crash because the tty_port structure contained in the hso_device structure has been freed. Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
The function hso_serial_common_free() is called either by the cleanup method of the tty or by the usb disconnect method. In the former case, the usb_disconnect() has been already called and the sysfs group associated to the device has been removed. By calling tty_unregister directly from the usb_disconnect() method, we avoid a warning due to the removal of the sysfs group of the usb device. Example of warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 778 at fs/sysfs/group.c:225 sysfs_remove_group+0x50/0x94() sysfs group c0645a88 not found for kobject 'ttyHS5' Modules linked in: CPU: 0 PID: 778 Comm: kworker/0:3 Tainted: G W 3.18.0+ #105 Workqueue: events release_one_tty [<c000dfe4>] (unwind_backtrace) from [<c000c014>] (show_stack+0x14/0x1c) [<c000c014>] (show_stack) from [<c0016bac>] (warn_slowpath_common+0x5c/0x7c) [<c0016bac>] (warn_slowpath_common) from [<c0016c60>] (warn_slowpath_fmt+0x30/0x40) [<c0016c60>] (warn_slowpath_fmt) from [<c00ddd14>] (sysfs_remove_group+0x50/0x94) [<c00ddd14>] (sysfs_remove_group) from [<c0221e44>] (device_del+0x30/0x190) [<c0221e44>] (device_del) from [<c0221fb0>] (device_unregister+0xc/0x18) [<c0221fb0>] (device_unregister) from [<c0221fec>] (device_destroy+0x30/0x3c) [<c0221fec>] (device_destroy) from [<c01fe1dc>] (tty_unregister_device+0x2c/0x5c) [<c01fe1dc>] (tty_unregister_device) from [<c029a428>] (hso_serial_common_free+0x2c/0x88) [<c029a428>] (hso_serial_common_free) from [<c029a4c0>] (hso_serial_ref_free+0x3c/0xb8) [<c029a4c0>] (hso_serial_ref_free) from [<c01ff430>] (release_one_tty+0x30/0x84) [<c01ff430>] (release_one_tty) from [<c00271d4>] (process_one_work+0x21c/0x3c8) [<c00271d4>] (process_one_work) from [<c0027758>] (worker_thread+0x3d8/0x560) [<c0027758>] (worker_thread) from [<c002be4c>] (kthread+0xc0/0xcc) [<c002be4c>] (kthread) from [<c0009630>] (ret_from_fork+0x14/0x24) ---[ end trace cb88537fdc8fa208 ]--- Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
There is no need for a dedicated reset work in the hso driver since there is already a reset work foreseen in usb_interface that does the same. Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
In other functions of the driver, variables of type "struct hso_serial" are denoted by "serial" and variables of type "struct hso_device" are denoted by "hso_dev". This patch makes the hso_free_interface() consistent with these notations. Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
Simply remove the useless extra tab. Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
When the rfkill interface was created, a buffer containing the name of the rfkill node was allocated. This buffer was never freed when the device disappears. To fix the problem, we put the name given to rfkill_alloc() in the hso_net structure. Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
In the disconnect path, tx_buffer should freed like tx_data to avoid a memory leak when the device disconnects. Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
When the device disappear, the function hso_disconnect() is called to perform cleanup. In the cleanup function, hso_free_interface() calls tty_port_tty_hangup() in view of scheduling a work to hang up the tty if needed. If the port was not open then hso_serial_ref_free() is called directly to cleanup everything. Otherwise, hso_serial_ref_free() is called when the last fd associated to the port is closed. For each open port, tty_release() will call the close method, hso_serial_close(), which drops the last kref and call hso_serial_ref_free() which unregisters, destroys the tty port and finally frees the structure in which the tty_port structure is included. Later, in tty_release(), more precisely when release_tty() is called, the tty_port previously freed is accessed to cancel the tty buf workqueue and it leads to a crash. In view of avoiding this crash, we add a cleanup method that is called at the end of the hangup process and we drop the last kref in this function when all the ports have been closed, when tty_port is no more needed and when it is safe to free the structure containing the tty_port structure. Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olivier Sobrie 提交于
No timer related function is used in this driver. Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2015 3 次提交
-
-
由 Eric Dumazet 提交于
Get rid of nr_cpu_ids and use modern percpu allocation. Note that the sockets themselves are not yet allocated using NUMA affinity. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karicheri, Muralidharan 提交于
NetCP on Keystone has cpsw ale function similar to other TI SoCs and this driver is re-used. To allow both ti cpsw and keystone netcp to re-use the driver, convert the cpsw ale to a module and configure it through Kconfig option CONFIG_TI_CPSW_ALE. Currently it is statically linked to both TI CPSW and NetCP and this causes issues when the above drivers are built as dynamic modules. This patch addresses this issue While at it, fix the Makefile and code to build both netcp_core and netcp_ethss as dynamic modules. This is needed to support arm allmodconfig. This also requires exporting of API calls provided by netcp_core so that both the above can be dynamic modules. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Tested-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kenneth Klette Jonassen 提交于
Current behavior only passes RTTs from sequentially acked data to CC. If sender gets a combined ACK for segment 1 and SACK for segment 3, then the computed RTT for CC is the time between sending segment 1 and receiving SACK for segment 3. Pass the minimum computed RTT from any acked data to CC, i.e. time between sending segment 3 and receiving SACK for segment 3. Signed-off-by: NKenneth Klette Jonassen <kennetkl@ifi.uio.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 1月, 2015 7 次提交
-
-
由 Nicholas Mc Guire 提交于
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 constructs by msecs_to_jiffies(var). Signed-off-by: NNicholas Mc Guire <der.herr@hofr.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
They are all either written once or extremly rarely (e.g. from init code), so we can move them to the .data..read_mostly section. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tony Lindgren says: ==================== Changes to cpsw and davinci_emac for getting MAC address Here are a few patches to add common code for cpsw and davinci_emac for getting the MAC address. Looks like we can also now add code to get the MAC address on 3517 but in a slightly different way. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Lindgren 提交于
Looks like on 3517 davinci_emac MAC address registers have a different layout compared to dm816x and am33xx. Let's add a function to get the 3517 MAC address. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Lindgren 提交于
At least on dm81xx, we can get the davinci_emac MAC address the same way as on am33xx cpsw. Let's also use ether_addr_copy() for davinci_emac while at it. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Lindgren 提交于
Looks like davinci_emac and cpsw can share some code although the device registers have a different layout. At least the code for getting the MAC address using syscon can be shared by passing the register offset. Let's start with that and set up a minimal shared cpsw-shared.c. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 1月, 2015 4 次提交
-
-
由 David S. Miller 提交于
Merge tag 'linux-can-next-for-3.20-20150128' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-28-01 this is a pull request of 12 patches for net-next/master. There are 3 patches by Ahmed S. Darwish, which update the kvaser_usb driver and add support for the USBcan-II based adapters. Stéphane Grosjean contributes 7 patches for the peak_usb driver, which add support for the CANFD USB adapters. I contribute 2 patches which clean up the peak_usb driver structure a bit. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kevin Hao 提交于
Since commit cd1e6504 ("of/device: Don't register disabled devices"), the disabled device will not be registered at all. So we don't need to do the check again in the platform device driver. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Salam Noureddine 提交于
When many pf_packet listeners are created on a lot of interfaces the current implementation using global packet type lists scales poorly. This patch adds per net_device packet type lists to fix this problem. The patch was originally written by Eric Biederman for linux-2.6.29. Tested on linux-3.16. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NSalam Noureddine <noureddine@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
When IFLA_LINK_NETNSID is used, the netdevice should be built in this link netns and moved at the end to another netns (pointed by the socket netns or IFLA_NET_NS_[PID|FD]). Existing user of the newlink handler will use the netns argument (src_net) to find a link netdevice or to check some other information into the link netns. For example, to find a netdevice, two information are required: an ifindex (usually from IFLA_LINK) and a netns (this link netns). Note: when using IFLA_LINK_NETNSID and IFLA_NET_NS_[PID|FD], a user may create a netdevice that stands in netnsX and with its link part in netnsY, by sending a rtnl message from netnsZ. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2015 6 次提交
-
-
由 Eric Dumazet 提交于
TIME_WAIT sockets are not owning any skb. ip_send_unicast_reply() and tcp_v6_send_response() both use regular sockets. We can safely remove a test in sch_fq and save one cache line miss, as sk_state is far away from sk_pacing_rate. Tested at Google for about one year. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
NET_ACT_CONNMARK fails to build if NF_CONNTRACK_MARK is disabled, and d7924450 ("act_connmark: Add missing dependency on NF_CONNTRACK_MARK") fixed that case, but missed the cased where NF_CONNTRACK is a loadable module. This adds the second dependency to ensure that NET_ACT_CONNMARK can only be built-in if NF_CONNTRACK is also part of the kernel rather than a loadable module. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
The sock_iocb structure is allocate on stack for each read/write-like operation on sockets, and contains various fields of which only the embedded msghdr and sometimes a pointer to the scm_cookie is ever used. Get rid of the sock_iocb and put a msghdr directly on the stack and pass the scm_cookie explicitly to netlink_mmap_sendmsg. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The if block was supposed to have curly braces. In the current code we complain about dropped rx packets when we shouldn't. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
Currently, it isn't possible to request checksums on the outer UDP header of tunnels - the TUNNEL_CSUM flag is ignored. This adds support for requesting that UDP checksums be computed on transmit and properly reported if they are present on receive. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next由 David S. Miller 提交于
NFC: 3.20 first pull request This is the first NFC pull request for 3.20. With this one we have: - Secure element support for the ST Micro st21nfca driver. This depends on a few HCI internal changes in order for example to support more than one secure element per controller. - ACPI support for NXP's pn544 HCI driver. This controller is found on many x86 SoCs and is typically enumerated on the ACPI bus there. - A few st21nfca and st21nfcb fixes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2015 1 次提交
-
-
由 Stephane Grosjean 提交于
Add support for the following new PEAK-System technik CANFD USB adapters: PCAN-USB FD single CANFD channel USB adapter PCAN-USB Pro FD dual CANFD channels USB adapter Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Acked-by: NAndri Yngvason <andri.yngvason@marel.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-