Journaled data is marked dirty by gfs2_unpin and should not be marked
dirty here.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This collects together the operations required to remove a gfs2_bufdata
from the ail lists. Its only called from two places to start with, but
expect to see more of this function in future.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch corrects the lock ordering in unlink to be the same as
that in the rest of GFS2, i.e. parent -> child -> rgrp.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Fix a nasty inode meta data corruption issue by keeping the buffer head in
icache array. This buffer needs to stay in memory until journal flush occurs
Otherwise, gfs2_meta_inode_buffer could do a disk read before the inode hits
disk. It ends up with meta data corruptions. The buffer will be released as
part of the existing journal flush logic.
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When a lot of IO, with some distributed mmap IO, is run on a GFS2 filesystem in
a cluster, it will deadlock. The reason is that do_no_page() will repeatedly
call gfs2_sharewrite_nopage(), because each node keeps giving up the glock
too early, and is forced to call unmap_mapping_range(). This bumps the
mapping->truncate_count sequence count, forcing do_no_page() to retry. This
patch institutes a minimum glock hold time a tenth a second.  This insures
that even in heavy contention cases, the node has enough time to get some
useful work done before it gives up the glock.

A second issue is that when gfs2_glock_dq() is called from within a page fault
to demote a lock, and the associated page needs to be written out, it will
try to acqire a lock on it, but it has already been locked at a higher level.
This patch puts makes gfs2_glock_dq() use the work queue as well, to avoid this
issue. This is the same patch as Steve Whitehouse originally proposed to fix
this issue, execpt that gfs2_glock_dq() now grabs a reference to the glock
before it queues up the work on it.
Signed-off-by: NBenjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When you try to mount gfs2 with -o garbage, the mount fails and the gfs2
superblock is deallocated and becomes NULL. The vfs comes around later
on and calls gfs2_kill_sb. At this point the hidden gfs2 superblock
pointer (sb->s_fs_info) is NULL and dereferencing it through
gfs2_meta_syncfs causes the panic. (the other function call to
gfs2_delete_debugfs_file() succeeds because this function already checks
for a NULL pointer)
Signed-off-by: NAbhijith Das <adas@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is a patch to GFS2 to protect sd_log_num_jdata with the
gfs2_log_lock.  Without this patch, there is a timing window
where you can get hit the following assert from function
gfs2_log_flush():

gfs2_assert_withdraw(sdp,
			sdp->sd_log_num_buf + sdp->sd_log_num_jdata ==
			sdp->sd_log_commited_buf +
			sdp->sd_log_commited_databuf);

I've tested it on my roth cluster and it fixes the problem.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

With this patch, gfs2 glockdump through the debugfs filesystem will only
dump glocks for the specified filesystem instead of all glocks. Also, to
aid debugging, the glock number is dumped in hex instead of decimal.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NAbhijith Das <adas@redhat.com>

This patch fixes the slight mess made in lowcomms closing by previous patches
and fixes all sorts of DLM hangs.
Signed-Off-By: NPatrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Current GFS2 setattr call unconditionally invokes do_shrink even the
requested size and actual file size are equal. This has generated large
amount of extra IOs found during NFS benchmark runs. This patch moves
the relevant logic out of shrink code path. Since setattr is a system
call, the time stamps update is still required.
Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

match_token() was returning garbage data instead of a fail value. This data
happened to match a valid option id for an option that required an argument (in
this case, lockproto=%s) For match_token() to correctly fail if the option
doesn't match any of the tokens, the token table must end with a NULL entry.
This patch adds the NULL entry.
Signed-off-by: NBenjamin E. Marzinski <bmarzins@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This was missing from the dir_split_leaf() function although in
most cases its not a problem due to other functions having
already previously called gfs2_trans_add_bh. This makes certain
that it is correct.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Wendy Cheng <wcheng@redhat.com>

This patch fixes some bugs relating to journaled data files by cleaning
up the gfs2_invalidatepage() and gfs2_releasepage() functions. We now
never block during gfs2_releasepage(), instead we always either release
or refuse to release depending on the status of the buffers.

This fixes Red Hat bugzillas #248969 and #252392.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>

This is the filesystem part of the patches to fix this bz. There are
additional userland patches (gfs2_quota, libgfs2) for the complete
solution. This patch adds a new field qu_ll_next to the gfs2_quota
structure. This field allows us to create linked lists of quotas in the
ondisk quota inode. Instead of scanning through the entire sparse quota
file for valid quotas, we can now simply walk through the user and group
quota linked lists to perform the do_list operation.
Signed-off-by: NAbhijith Das <adas@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch forcibly unstuffs (if stuffed) the hidden quota inode at the
first availble opportunity. In any practical scenario the quota inode
won't be stuffed, so this is ok to do. Unstuffing the quota inode allows
us to ignore the case of a stuffed quota inode in gfs2_adjust_quota().
Signed-off-by: NAbhijith Das <adas@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

the original code could work, but I think this code could work better.
Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

sb->s_fs_info is a void pointer, thus the type cast is not needed.
Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is for bugzilla bug #248176: GFS2: invalid metadata block

Patches 1 thru 3 were accepted upstream, but there were problems
with 4 and 5.  Those issues have been resolved and now the recovery
tests are passing without errors.  This code has gone through
41 * 3 successful gfs2 recovery tests before it hit an
unrelated (openais) problem.  I'm continuing to test it.

This is a complete rewrite of patch 5 for bug #248176, written by
Steve Whitehouse.  This is referred to in the bugzilla record as
"new 6" and "a different solution".

The problem was that the journal inodes, although protected by
a glock, were not synched with the other nodes because they don't
use the inode glock synch operations (i.e. no "glops" were defined).
Therefore, journal recovery on a journal-recovering node were causing
the blocks to get out of sync with the node that was actually trying
to use that journal as it comes back up from a reboot.

There are two possible solutions: (1) To make the journals use the
normal inode glock sync operations, or (2) To make the journal
operations take effect immediately (i.e. no caching).  Although
option 1 works, it turns out to be a lot more code.  Steve opted
for option 2, which is much simpler and therefore less prone to
regression errors.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

--

This is for bugzilla bug #248176: GFS2: invalid metadata block

Patches 1 thru 3 were accepted upstream, but there were problems
with 4 and 5.  Those issues have been resolved and now the recovery
tests are passing without errors.  This code has gone through
41 * 3 successful gfs2 recovery tests before it hit an
unrelated (openais) problem.

This is a complete rewrite of patch 4 for bug #248176.

Part of the problem was that inodes were being recycled
before their buffers were flushed to the journal logs.
Another problem was that the clone bitmaps were being
searched for deleted inodes to recycle, but only the
"real" bitmaps should be searched for that purpose.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

We only need a single gfs2_scand process rather than the one
per filesystem which we had previously. As a result the parameter
determining the frequency of gfs2_scand runs becomes a module
parameter rather than a mount parameter as it was before.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

these struct *_operations are all method tables, thus should be const.
Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is patch 5 of 5 for bug #248176

Metadata corruption was occurring because page references weren't
being removed in all cases.  I previously added a function called
detach_bufdata, but I discovered there already WAS a function out
there to do the job.  It's called gfs2_meta_cache_flush.  So I added
a call to that to remove the page references.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

this is more clear.
Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NDavid Teigland <teigland@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is patch three of five for bug #248176.

The try_rgrp_unlink code in rgrp.c had an infinite loop.  This was
caused because the bitmap function rgblk_search can return a block
less than the "goal" block, in which case it was looping.  The fix is
to make it always march forward as needed.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is patch 2 of 5 for bug #248176.

The list_move code previously concocted in log.c for bug #238162
(see https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=238162#c23)
never runs as bh can now never be NULL at this point.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This is the first of five patches for bug #248176:

There were still some critical variables being manipulated outside
the log_lock spinlock.  That usually resulted in a hang.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This fixes an oops which was occurring during glock dumping due to the
seq file code not taking a reference to the glock. Also this fixes a
memory leak which occurred in certain cases, in turn preventing the
filesystem from unmounting.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

When looking at an unrelated problem, I noticed that nfsd does not
set nameidata pointer on create (ie nd is NULL).  This should
cause an oops in some cases in which when NFSd is mounted over GFS2.
Signed-off-by: NSteve French <sfrench@us.ibm.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

This patch cleans up duplicate includes in
	fs/gfs2/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

If a glock is in the exclusive state and a request for demote to
deferred has been received, then further requests for demote to
shared are being ignored. This patch fixes that by ensuring that
we demote to unlocked in that case.
Signed-off-by: NJosef Whiter <jwhiter@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

One of the races relates to referencing a variable while not holding
its protecting spinlock. The patch simply moves the test inside the
spin lock. The other races occurs when a demote to unlocked request
occurs during the time a demote to shared request is already running.
This of course only happens in the case that the lock was in the
exclusive mode to start with. The patch adds a check to see if another
demote request has occurred in the mean time and if it has, then it
performs a second demote.
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Au1000: set the PCI controller IO base
  [MIPS] Alchemy: Fix USB initialization.
  [MIPS] IP32: Fix fatal typo in address computation.

The recent fix for a circular lock dependency unfortunately introduced a
potential memory leak in the event where the call to nlmsvc_lookup_host
fails for some reason.

Thanks to Roel Kluin for spotting this.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent mv_fill_sg() rewrite, to fix a data corruption problem
related to IOMMU virtual merging, forgot to account for the
potentially-increased size of the scatter/gather table after its run.

Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff
to more closely match the needs of mv_fill_sg().
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PCI controller IO base was not set in the au1000 pci code.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes a wrong ifdef in the board setup code, leading to the GPIO
pin not being pulled high, and thus the USB switch not being powered at all.

This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which
started in 2005 (before 2.6.12-rc2), then probably because things were
working anyway for most people got forgotten.

[Ralf: Paolo's original patch didn't fix the module case, Florian's patch
only fixed MTX1 etc. so this is a combined patch plus some cleanups.]

Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>