- 25 4月, 2007 7 次提交
-
-
The Linux ThinkPad community is not positive that all ThinkPads that do HFSP EC fan control do implement full-speed and auto modes, some of the earlier ones supporting HFSP might not. If the EC ignores the AUTO or FULL-SPEED bits, it will pay attention to the lower three bits that set the fan level. And as thinkpad-acpi was leaving these set to zero, it would stop(!) the fan, which is Not A Good Thing. So, as a safety net, we now make sure to also set the fan level part of the HFSP register to speed 7 for full-speed, and a minimum of speed 4 for auto mode. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Export sysfs attributes to monitor and control the internal thinkpad fan (some thinkpads have more than one fan, but thinkpad-acpi doesn't support the second fan yet). The sysfs interface follows the hwmon design guide for fan devices. Also, fix some stray "thermal" files in the fan procfs description that have been there forever, and officially support "full-speed" as the name for the PWM-disabled state of the fan controller to keep it in line with the hwmon interface. It is much better a name for that mode than the unobvious "disengaged" anyway. Change the procfs interface to also accept full-speed as a fan level, but still report it as disengaged for backwards compatibility. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Export thinkpad thermal sensors to sysfs, following the hwmon specification for thermal monitoring sensors. ThinkPad thermal monitoring is done by the EC. Sensors can show up or disappear at runtime when they are inside hotswappable hardware, such as batteries. Sensors that are not available return -ENXIO when accessed. Up to 16 thermal sensors are supported on new firmware (but nobody has reported a ThinkPad with more than 12 sensors so far), and 8 sensors are supported on older firmware. Thermal sensor mapping is model-specific. Precision varies, it is 1 degree Celcius on new ThinkPads, but higher on some older models. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add proper mutex locking to some data structures access subject to races due to concurrent access of driver functions on the hotkey and fan subdrivers. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add infrastructure to deal with sysfs attributes and grouping, and helpers for common sysfs parsing. Switch driver attributes to use them. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add the sysfs attributes for the platform driver. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Register thinkpad-acpi platform driver and platform device for the device model. Also register the platform device with the hwmon class. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 22 4月, 2007 20 次提交
-
-
Improve some of the fan watchdog error messages to be a little more helpful. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Clean-up the thermal subdriver for sysfs conversion. Make thermal_get_* reentrancy-safe while at it, and add the missing thermal_read_mode variable to the header file. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Some ThinkPad CMOS commands subdriver cleanups, and also rename/promote cmos_eval to a ACPI helper function, as it is used by many other subdrivers. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Cleanup video subdriver for sysfs conversion, and properly check result status of acpi_evalf. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Prepare bluetooth and wan driver code to be more easily hooked into sysfs helpers, by separating the procfs logic from the device attribute handling. These changes also remove the entries from procfs on notebooks without the bluetooth/wan hardware installed. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Cleanup hotkey subdriver code. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Mark acpi_evalf and friends __must_check. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Prepare the thinkpad-acpi driver for the conversion to the device model, by renaming variables and doing other glue work that shall make the later patches much cleaner. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Use a bitfield to hold boolean module-wide flags, to conserve some memory. It is easy and it is clean, so we do it just for the heck of it even if it saves very little space. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Save some memory by using bitfields to hold boolean flags for the subdrivers. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Improve the detection of ThinkPads, so as to reduce the chances of false positives. Since this could potentially add false negatives on the very old models, add a module parameter to force the detection of a thinkpad. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Move the .init method from ibms struct to another struct, and use a list head to control which subdrivers have been activated. This allows us to have the subdriver init methods marked __init, saving quite a lot of .text size, and even a bit of .data size as some data can now be made __initdata. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add debug messages to the subdriver initialization and exit code. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Move most of the probing code to its own function, and most of the subdriver-specific init code into subdriver init functions. This allows us to not define pci_handle unless the dock subdriver is enabled, as well. This patch causes a minor userland interface change: if a subdriver doesn't detect a capability, /proc entries for it are not created anymore (as opposed to a /proc entry that just returned "unsupported"). Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add a debug mode parameter and verbose debug mode Kconfig option. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Update some stuff in the in-code text describing the ThinkPad fan firmware. This patch has no code changes. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Rename all IBMACPI_ constants, now that we are not called ibm-acpi anymore. Driver-specific constants are now prefixed TPACPI_, ThinkPad firmware specific ones are now prefixed TP_CMOS_, TP_ACPI_, or TP_EC_. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Rename module init and exit functions, now that we are not called ibm-acpi anymore. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Rename a stray use of ibm-acpi on a comment, no functional changes. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Rename register_ibmacpi_subdriver to register_tpacpi_subdriver, as we are not called ibmacpi anymore. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 31 3月, 2007 4 次提交
-
-
Cleanup documentation, driver strings and other misc stuff, now that the driver is named "thinkpad-acpi". Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Add a ibm_acpi module alias for userpace, so that modprobe ibm_acpi will still load the correct driver. This alias can be removed in the future, probably two years from now if nothing warrants removing it sooner. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Since ibm-acpi was renamed to thinkpad-acpi, rename and update its Kconfig entries and Kconfig-related symbols accordingly. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
Rename the ibm-acpi driver to thinkpad-acpi. ThinkPads are not even made by IBM anymore, so it is high time to rename the driver... The name thinkpad-acpi was used sometime ago by a thinkpad-specific hotkey driver by Erik Rigtorp, around the 2.6.8-2.6.10 time frame. The driver apparently never got merged into mainline (it did make some trips through -mm). ibm-acpi was merged soon after, making its debut in 2.6.10. The reuse of the thinkpad-acpi name shouldn't be a problem as far as user confusion goes, as Erik's thinkpad-acpi apparently didn't get widespread use in the Linux ThinkPad community and most hits for thinkpad-acpi in google point to ibm-acpi anyway. Erik, if you read this, please consider the reuse of the thinkpad-acpi name as a compliment to your effort to make ThinkPads more useful to all of us. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 26 3月, 2007 1 次提交
-
-
ibm-acpi is not an ACPICA driver, so move it to drivers/misc as per Len Brown's request. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 10 3月, 2007 1 次提交
-
-
由 Adrian Bunk 提交于
This patch makes some needlessly global code static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 07 3月, 2007 1 次提交
-
-
由 Andrew Morton 提交于
drivers/misc/sony-laptop.c: In function 'sony_acpi_add': drivers/misc/sony-laptop.c:456: warning: 'result' may be used uninitialized in this function The compiler seems to actually be telling the truth this time. Cc: Mattia Dongili <malattia@linux.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 20 2月, 2007 4 次提交
-
-
由 Richard Purdie 提交于
Per device data such as brightness belongs to the indivdual device and should therefore be separate from the the backlight operation function pointers. This patch splits the two types of data and allows simplifcation of some code. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Move the setting/unsetting of pmac_backlight into the backlight core instead of doing it in each driver. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
backlight_device->sem has a very specific use as documented in the header file. The external users of this are using it for a different reason, to serialise access to the update_status() method. backlight users were supposed to implement their own internal serialisation of update_status() if needed but everyone is doing things differently and incorrectly. Therefore add a global mutex to take care of serialisation for everyone, once and for all. Locking for get_brightness remains optional since most users don't need it. Also update the lcd class in a similar way. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Remove uneeded owner field from backlight_properties structure. Nothing uses it and it is unlikely that it will ever be used. The backlight class uses other means to ensure that nothing references unloaded code. Based on a patch from Dmitry Torokhov <dtor@insightbb.com> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
- 17 2月, 2007 1 次提交
-
-
由 Len Brown 提交于
Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 15 2月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-