- 21 7月, 2014 5 次提交
-
-
由 David Hildenbrand 提交于
We can get rid of the tasklet used for waking up a VCPU in the hrtimer code but wakeup the VCPU directly. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Let's move the vcpu wakeup code to a central point. We should set the vcpu->preempted flag only if the target is actually sleeping and before the real wakeup happens. Otherwise the preempted flag might be set, when not necessary. This may result in immediate reschedules after schedule() in some scenarios. The wakeup code doesn't require the local_int.lock to be held. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
The start_stop_lock is no longer acquired when in atomic context, therefore we can convert it into an ordinary spin_lock. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
local_int.lock is not used in a bottom-half handler anymore, therefore we can turn it into an ordinary spin_lock at all occurrences. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch cleans up the code in handle_wait by reusing the common code function kvm_vcpu_block. signal_pending(), kvm_cpu_has_pending_timer() and kvm_arch_vcpu_runnable() are sufficient for checking if we need to wake-up that VCPU. kvm_vcpu_block uses these functions, so no checks are lost. The flag "timer_due" can be removed - kvm_cpu_has_pending_timer() tests whether the timer is pending, thus the vcpu is correctly woken up. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 10 7月, 2014 4 次提交
-
-
由 David Hildenbrand 提交于
This patch - adds s390 specific MP states to linux headers and documents them - implements the KVM_{SET,GET}_MP_STATE ioctls - enables KVM_CAP_MP_STATE - allows user space to control the VCPU state on s390. If user space sets the VCPU state using the ioctl KVM_SET_MP_STATE, we can disable manual changing of the VCPU state and trust user space to do the right thing. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
The function "__cpu_is_stopped" is not used any more. Let's remove it and expose the function "is_vcpu_stopped" instead, which is actually what we want. This patch also converts an open coded check for CPUSTAT_STOPPED to is_vcpu_stopped(). Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
Let's move the finalization of SIGP STOP and SIGP STOP AND STORE STATUS orders to the point where the VCPU is actually stopped. This change is needed to prepare for a user space driven VCPU state change. The action_bits may only be cleared when setting the cpu state to STOPPED while holding the local irq lock. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
A SIGP STOP (AND STORE STATUS) order is complete as soon as the VCPU has been stopped. This patch makes sure that only one SIGP STOP (AND STORE STATUS) may be pending at a time (as defined by the architecture). If the action_bits are still set, a SIGP STOP has been issued but not completed yet. The VCPU is busy for further SIGP STOP orders. Also set the CPUSTAT_STOP_INT after the action_bits variable has been modified (the same order that is used when injecting a KVM_S390_SIGP_STOP from userspace). Both changes are needed in preparation for a user space driven VCPU state change (to avoid race conditions). Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 26 6月, 2014 1 次提交
-
-
由 Heiko Carstens 提交于
sie.h was missing in arch/s390/include/uapi/asm/Kbuild and therefore missed the "make headers_check" target. If added it reveals that also arch/s390/include/asm/sigp.h would become uapi. This is something we certainly do not want. So remove that dependency as well. The header file was merged with ceae283b "KVM: s390: add sie exit reasons tables", therefore we never had a kernel release with this commit and can still change anything. Acked-by: NAlexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
- 05 6月, 2014 1 次提交
-
-
由 Naoya Horiguchi 提交于
Currently hugepage migration is available for all archs which support pmd-level hugepage, but testing is done only for x86_64 and there're bugs for other archs. So to avoid breaking such archs, this patch limits the availability strictly to x86_64 until developers of other archs get interested in enabling this feature. Simply disabling hugepage migration on non-x86_64 archs is not enough to fix the reported problem where sys_move_pages() hits the BUG_ON() in follow_page(FOLL_GET), so let's fix this by checking if hugepage migration is supported in vma_migratable(). Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by: NMichael Ellerman <mpe@ellerman.id.au> Tested-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NHugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 6月, 2014 1 次提交
-
-
由 Daniel Borkmann 提交于
This patch finally allows us to get rid of the BPF_S_* enum. Currently, the code performs unnecessary encode and decode workarounds in seccomp and filter migration itself when a filter is being attached in order to overcome BPF_S_* encoding which is not used anymore by the new interpreter resp. JIT compilers. Keeping it around would mean that also in future we would need to extend and maintain this enum and related encoders/decoders. We can get rid of all that and save us these operations during filter attaching. Naturally, also JIT compilers need to be updated by this. Before JIT conversion is being done, each compiler checks if A is being loaded at startup to obtain information if it needs to emit instructions to clear A first. Since BPF extensions are a subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements for extensions can be removed at that point. To ease and minimalize code changes in the classic JITs, we have introduced bpf_anc_helper(). Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int), arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we unfortunately didn't have access, but changes are analogous to the rest. Joint work with Alexei Starovoitov. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: NChema Gonzalez <chemag@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 5月, 2014 6 次提交
-
-
由 Matthew Rosato 提交于
Based on original patch from Jeng-fang (Nick) Wang When standby memory is specified for a guest Linux, but no virtual memory has been allocated on the Qemu host backing that guest, the guest memory detection process encounters a memory access exception which is not thrown from the KVM handle_tprot() instruction-handler function. The access exception comes from sie64a returning EFAULT, which then passes an addressing exception to the guest. Unfortunately this does not the proper PSW fixup (nullifying vs. suppressing) so the guest will get a fault for the wrong address. Let's just intercept the tprot instruction all the time to do the right thing and not go the page fault handler path for standby memory. tprot is only used by Linux during startup so some exits should be ok. Without this patch, standby memory cannot be used with KVM. Signed-off-by: NNick Wang <jfwang@us.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Tested-by: NMatthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch removes the start of a VCPU when delivering a RESTART interrupt. Interrupt delivery is called from kvm_arch_vcpu_ioctl_run. So the VCPU is already considered started - no need to call kvm_s390_vcpu_start. This function will early exit anyway. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 David Hildenbrand 提交于
This patch fixes a minor bug when updating the guest debug settings. We should check the given debug flags, not the already set ones. Doesn't do any harm but too many (for now unused) flags could be set internally without error. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Jens Freimann 提交于
We have all the logic to inject interrupts available in kvm_s390_inject_vcpu(), so let's use it instead of injecting irqs manually to the list in sigp code. SIGP stop is special because we have to check the action_flags before injecting the interrupt. As the action_flags are not available in kvm_s390_inject_vcpu() we leave the code for the stop order code untouched for now. Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
由 Thomas Huth 提交于
The TPROT instruction can be used to check the accessability of storage for any kind of logical addresses. So far, our handler only supported real addresses. This patch now also enables support for addresses that have to be translated via DAT first. And while we're at it, change the code to use the common KVM function gfn_to_hva_prot() to check for the validity and writability of the memory page. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
由 Thomas Huth 提交于
This patch adds a function for translating logical guest addresses into physical guest addresses without touching the memory at the given location. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
- 28 5月, 2014 3 次提交
-
-
由 Martin Schwidefsky 提交于
Remove the 96-byte irb array from the lowcore and create a per-cpu variable instead. That way we will pick up any change in the definition of the struct irb automatically. Acked-By: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
The IRB might be 96 bytes if the extended-I/O-measurement facility is used. This feature is currently not used by Linux, but struct irb already has the emw defined. So let's make the irb in lowcore match the size of the internal data structure to be future proof. We also have to add a pad, to correctly align the paste. The bigger irb field also circumvents a bug in some QEMU versions that always write the emw field on test subchannel and therefore destroy the paste definitions of this CPU. Running under these QEMU version broke some timing functions in the VDSO and all users of these functions, e.g. some JREs. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: stable@vger.kernel.org
-
由 Heiko Carstens 提交于
Remove the check for the extract-cpu-time facility within early startup code. Both kernel and user space work if the facility is not installed. The vdso code has a run time check if the ectg is available. Besides that there is no known user. Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 5月, 2014 4 次提交
-
-
由 Heiko Carstens 提交于
With inlined uaccess functions we always need the mvcos facility. Checking at each inline place if mvcos is available would make the inlining of get_user/put_user pointless. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add -fno-delete-null-pointer-checks to CFLAGS for the code in arch/s390/boot. Without the option a compressed kernel built with gcc 4.9 won't boot. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Analog to git commit 28b92e09 first cast tk->wall_to_monotonic.tv_nsec to u64 before doing the shift with tk->shift to avoid loosing relevant bits on a 32-bit kernel. Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Julia Lawall 提交于
Delete unnecessary local variable whose value is always 0 and that hides the fact that the result is always 0. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression ret; expression e; position p; @@ -ret = 0; ... when != ret = e return - ret + 0 ; // </smpl> [heiko.carstens: turn prepare_cpu_buffers into a void returning function] Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 23 5月, 2014 1 次提交
-
-
由 Sebastian Ott 提交于
Let the driver core handle attribute creation by putting all s390 specific pci attributes in an attribute group which is referenced by pdev->dev.groups in pcibios_add_device. Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrettReviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 20 5月, 2014 14 次提交
-
-
由 Martin Schwidefsky 提交于
Reorder the spinlock wait code to make it more readable. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The out of line _raw_read_lock_wait_flags/_raw_write_lock_wait_flags functions for the arch_read_lock_flags/arch_write_lock_flags calls fail to re-enable the interrupts after another unsuccessful try to get the lock with compare-and-swap. The following wait would be done with interrupts disabled which is suboptimal. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
In case a lock is contended it is better to do a load-and-test first before trying to get the lock with compare-and-swap. This helps to avoid unnecessary cache invalidations of the cacheline for the lock if the CPU has to wait for the lock. For an uncontended lock doing the compare-and-swap directly is a bit better, if the CPU does not have the cacheline in its cache yet the compare-and-swap will get it read-write immediately while a load-and-test would get it read-only first. Always to the load-and-test first to avoid the cacheline invalidations for the contended case outweight the potential read-only to read-write cacheline upgrade for the uncontended case. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Fix multiple definitions of struct channel_path_desc by moving it to asm/chpid.h . Also change ccw_device_get_chp_desc to use proper types. Reviewed-by: NPeter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Gerald Schaefer 提交于
On LPAR, when spin_retry is set to <= 0, arch_spin_lock_wait() and arch_spin_lock_wait_flags() may end up in a while(1) loop w/o doing any compare and swap operation. To fix this, use do/while instead of for loop. Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jeff Mahoney 提交于
This fixes: arch/s390/appldata/appldata_mem.c:135:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] arch/s390/appldata/appldata_mem.c:141:3: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
This shortens the code by ~17k (performace_defconfig, march=z196). The number of exception table entries however increases from 164 entries to 2500 entries (+~18k). However the executed code is shorter and also faster since we save the branches to the out-of-line copy_to/from_user implementations. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Add a bunch of s390 specific pci attributes to help identifying pci functions. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Let the driver core handle attribute creation by putting all s390 specific pci attributes in an attribute group which is referenced by pdev->dev.groups in pcibios_add_device. Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrettReviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Introduce the zpci_attr macro to create read only sysfs attributes to avoid duplicate code. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Processing pci hotplug events can fail when a pci function is in an unexpected state. This can happen when we already processed the change associated with the hotplug event (especially when receiving hotplug events during early boot). Just ignore the event in this case. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Always switch to the kernel ASCE in switch_mm. Load the secondary space ASCE in finish_arch_post_lock_switch after checking that any pending page table operations have completed. The primary ASCE is loaded in entry[64].S. With this the update_primary_asce call can be removed from the switch_to macro and from the start of switch_mm function. Remove the load_primary argument from update_user_asce/clear_user_asce, rename update_user_asce to set_user_asce and rename update_primary_asce to load_kernel_asce. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Currently the smp_stop_cpu() function for SMP kernels enters a busy loop when "begin" is entered on the z/VM console after Linux is halted. To avoid this behavior, use the non-SMP variant of smp_stop_cpu() which stops the CPU again after "begin" is entered. As a side effect we now have consistent behavior for SMP and non-SMP Linux. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-