Signed-off-by: NYan, Zheng <zyan@redhat.com>

When iov_iter type is ITER_PIPE, copy_page_to_iter() increases
the page's reference and add the page to a pipe_buffer. It also
set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm
callback in page_cache_pipe_buf_ops expects the page is from page
cache and uptodate, otherwise it return error.

For ceph_sync_read() case, pages are not from page cache. So we
can't call copy_page_to_iter() when iov_iter type is ITER_PIPE.
The fix is using iov_iter_get_pages_alloc() to allocate pages
for the pipe. (the code is similar to default_file_splice_read)
Signed-off-by: NYan, Zheng <zyan@redhat.com>

For readahead/fadvise cases, caller of ceph_readpages does not
hold buffer capability. Pages can be added to page cache while
there is no buffer capability. This can cause data integrity
issue.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

try_get_cap_refs can be used as a condition in a wait_event* calls.
This is all fine until it has to call __ceph_do_pending_vmtruncate,
which in turn acquires the i_truncate_mutex. This leads to a situation
in which a task's state is !TASK_RUNNING and at the same time it's
trying to acquire a sleeping primitive. In essence a nested sleeping
primitives are being used. This causes the following warning:

WARNING: CPU: 22 PID: 11064 at kernel/sched/core.c:7631 __might_sleep+0x9f/0xb0()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8109447d>] prepare_to_wait_event+0x5d/0x110
 ipmi_msghandler tcp_scalable ib_qib dca ib_mad ib_core ib_addr ipv6
CPU: 22 PID: 11064 Comm: fs_checker.pl Tainted: G           O    4.4.20-clouder2 #6
Hardware name: Supermicro X10DRi/X10DRi, BIOS 1.1a 10/16/2015
 0000000000000000 ffff8838b416fa88 ffffffff812f4409 ffff8838b416fad0
 ffffffff81a034f2 ffff8838b416fac0 ffffffff81052b46 ffffffff81a0432c
 0000000000000061 0000000000000000 0000000000000000 ffff88167bda54a0
Call Trace:
 [<ffffffff812f4409>] dump_stack+0x67/0x9e
 [<ffffffff81052b46>] warn_slowpath_common+0x86/0xc0
 [<ffffffff81052bcc>] warn_slowpath_fmt+0x4c/0x50
 [<ffffffff8109447d>] ? prepare_to_wait_event+0x5d/0x110
 [<ffffffff8109447d>] ? prepare_to_wait_event+0x5d/0x110
 [<ffffffff8107767f>] __might_sleep+0x9f/0xb0
 [<ffffffff81612d30>] mutex_lock+0x20/0x40
 [<ffffffffa04eea14>] __ceph_do_pending_vmtruncate+0x44/0x1a0 [ceph]
 [<ffffffffa04fa692>] try_get_cap_refs+0xa2/0x320 [ceph]
 [<ffffffffa04fd6f5>] ceph_get_caps+0x255/0x2b0 [ceph]
 [<ffffffff81094370>] ? wait_woken+0xb0/0xb0
 [<ffffffffa04f2c11>] ceph_write_iter+0x2b1/0xde0 [ceph]
 [<ffffffff81613f22>] ? schedule_timeout+0x202/0x260
 [<ffffffff8117f01a>] ? kmem_cache_free+0x1ea/0x200
 [<ffffffff811b46ce>] ? iput+0x9e/0x230
 [<ffffffff81077632>] ? __might_sleep+0x52/0xb0
 [<ffffffff81156147>] ? __might_fault+0x37/0x40
 [<ffffffff8119e123>] ? cp_new_stat+0x153/0x170
 [<ffffffff81198cfa>] __vfs_write+0xaa/0xe0
 [<ffffffff81199369>] vfs_write+0xa9/0x190
 [<ffffffff811b6d01>] ? set_close_on_exec+0x31/0x70
 [<ffffffff8119a056>] SyS_write+0x46/0xa0

This happens since wait_event_interruptible can interfere with the
mutex locking code, since they both fiddle with the task state.

Fix the issue by using the newly-added nested blocking infrastructure
in 61ada528 ("sched/wait: Provide infrastructure to deal with
nested blocking")

Link: https://lwn.net/Articles/628628/Signed-off-by: NNikolay Borisov <kernel@kyup.com>
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Fix printing wrong return variable for invalidate_inode_pages2_range in
ceph_direct_read_write().
Signed-off-by: NZhi Zhang <zhang.david2011@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Include linux/crush/mapper.h in crush/mapper.c to get the prototypes of
crush_find_rule and crush_do_rule which are defined there. This fixes
the following GCC warnings when building with 'W=1':

  net/ceph/crush/mapper.c:40:5: warning: no previous prototype for ‘crush_find_rule’ [-Wmissing-prototypes]
  net/ceph/crush/mapper.c:793:5: warning: no previous prototype for ‘crush_do_rule’ [-Wmissing-prototypes]
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
[idryomov@gmail.com: corresponding !__KERNEL__ include]
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

drivers/block/rbd.c: In function ‘rbd_watch_cb’:
drivers/block/rbd.c:3690:5: error: ‘struct_v’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/block/rbd.c:3759:5: note: ‘struct_v’ was declared here
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

->get_authorizer(), ->verify_authorizer_reply(), ->sign_message() and
->check_message_signature() shouldn't be doing anything with or on the
connection (like closing it or sending messages).
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

The length of the reply is protocol-dependent - for cephx it's
ceph_x_authorize_reply.  Nothing sensible can be passed from the
messenger layer anyway.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

After sending an authorizer (ceph_x_authorize_a + ceph_x_authorize_b),
the client gets back a ceph_x_authorize_reply, which it is supposed to
verify to ensure the authenticity and protect against replay attacks.
The code for doing this is there (ceph_x_verify_authorizer_reply(),
ceph_auth_verify_authorizer_reply() + plumbing), but it is never
invoked by the the messenger.

AFAICT this goes back to 2009, when ceph authentication protocols
support was added to the kernel client in 4e7a5dcd ("ceph:
negotiate authentication protocol; implement AUTH_NONE protocol").

The second param of ceph_connection_operations::verify_authorizer_reply
is unused all the way down.  Pass 0 to facilitate backporting, and kill
it in the next commit.

Cc: stable@vger.kernel.org
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

It's called during inital setup, when everything should be allocated
with GFP_KERNEL.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

This is useless and more importantly not allowed on the writeback path,
because crypto_alloc_skcipher() allocates memory with GFP_KERNEL, which
can recurse back into the filesystem:

    kworker/9:3     D ffff92303f318180     0 20732      2 0x00000080
    Workqueue: ceph-msgr ceph_con_workfn [libceph]
     ffff923035dd4480 ffff923038f8a0c0 0000000000000001 000000009eb27318
     ffff92269eb28000 ffff92269eb27338 ffff923036b145ac ffff923035dd4480
     00000000ffffffff ffff923036b145b0 ffffffff951eb4e1 ffff923036b145a8
    Call Trace:
     [<ffffffff951eb4e1>] ? schedule+0x31/0x80
     [<ffffffff951eb77a>] ? schedule_preempt_disabled+0xa/0x10
     [<ffffffff951ed1f4>] ? __mutex_lock_slowpath+0xb4/0x130
     [<ffffffff951ed28b>] ? mutex_lock+0x1b/0x30
     [<ffffffffc0a974b3>] ? xfs_reclaim_inodes_ag+0x233/0x2d0 [xfs]
     [<ffffffff94d92ba5>] ? move_active_pages_to_lru+0x125/0x270
     [<ffffffff94f2b985>] ? radix_tree_gang_lookup_tag+0xc5/0x1c0
     [<ffffffff94dad0f3>] ? __list_lru_walk_one.isra.3+0x33/0x120
     [<ffffffffc0a98331>] ? xfs_reclaim_inodes_nr+0x31/0x40 [xfs]
     [<ffffffff94e05bfe>] ? super_cache_scan+0x17e/0x190
     [<ffffffff94d919f3>] ? shrink_slab.part.38+0x1e3/0x3d0
     [<ffffffff94d9616a>] ? shrink_node+0x10a/0x320
     [<ffffffff94d96474>] ? do_try_to_free_pages+0xf4/0x350
     [<ffffffff94d967ba>] ? try_to_free_pages+0xea/0x1b0
     [<ffffffff94d863bd>] ? __alloc_pages_nodemask+0x61d/0xe60
     [<ffffffff94ddf42d>] ? cache_grow_begin+0x9d/0x560
     [<ffffffff94ddfb88>] ? fallback_alloc+0x148/0x1c0
     [<ffffffff94ed84e7>] ? __crypto_alloc_tfm+0x37/0x130
     [<ffffffff94de09db>] ? __kmalloc+0x1eb/0x580
     [<ffffffffc09fe2db>] ? crush_choose_firstn+0x3eb/0x470 [libceph]
     [<ffffffff94ed84e7>] ? __crypto_alloc_tfm+0x37/0x130
     [<ffffffff94ed9c19>] ? crypto_spawn_tfm+0x39/0x60
     [<ffffffffc08b30a3>] ? crypto_cbc_init_tfm+0x23/0x40 [cbc]
     [<ffffffff94ed857c>] ? __crypto_alloc_tfm+0xcc/0x130
     [<ffffffff94edcc23>] ? crypto_skcipher_init_tfm+0x113/0x180
     [<ffffffff94ed7cc3>] ? crypto_create_tfm+0x43/0xb0
     [<ffffffff94ed83b0>] ? crypto_larval_lookup+0x150/0x150
     [<ffffffff94ed7da2>] ? crypto_alloc_tfm+0x72/0x120
     [<ffffffffc0a01dd7>] ? ceph_aes_encrypt2+0x67/0x400 [libceph]
     [<ffffffffc09fd264>] ? ceph_pg_to_up_acting_osds+0x84/0x5b0 [libceph]
     [<ffffffff950d40a0>] ? release_sock+0x40/0x90
     [<ffffffff95139f94>] ? tcp_recvmsg+0x4b4/0xae0
     [<ffffffffc0a02714>] ? ceph_encrypt2+0x54/0xc0 [libceph]
     [<ffffffffc0a02b4d>] ? ceph_x_encrypt+0x5d/0x90 [libceph]
     [<ffffffffc0a02bdf>] ? calcu_signature+0x5f/0x90 [libceph]
     [<ffffffffc0a02ef5>] ? ceph_x_sign_message+0x35/0x50 [libceph]
     [<ffffffffc09e948c>] ? prepare_write_message_footer+0x5c/0xa0 [libceph]
     [<ffffffffc09ecd18>] ? ceph_con_workfn+0x2258/0x2dd0 [libceph]
     [<ffffffffc09e9903>] ? queue_con_delay+0x33/0xd0 [libceph]
     [<ffffffffc09f68ed>] ? __submit_request+0x20d/0x2f0 [libceph]
     [<ffffffffc09f6ef8>] ? ceph_osdc_start_request+0x28/0x30 [libceph]
     [<ffffffffc0b52603>] ? rbd_queue_workfn+0x2f3/0x350 [rbd]
     [<ffffffff94c94ec0>] ? process_one_work+0x160/0x410
     [<ffffffff94c951bd>] ? worker_thread+0x4d/0x480
     [<ffffffff94c95170>] ? process_one_work+0x410/0x410
     [<ffffffff94c9af8d>] ? kthread+0xcd/0xf0
     [<ffffffff951efb2f>] ? ret_from_fork+0x1f/0x40
     [<ffffffff94c9aec0>] ? kthread_create_on_node+0x190/0x190

Allocating the cipher along with the key fixes the issue - as long the
key doesn't change, a single cipher context can be used concurrently in
multiple requests.

We still can't take that GFP_KERNEL allocation though.  Both
ceph_crypto_key_clone() and ceph_crypto_key_decode() are called from
GFP_NOFS context, so resort to memalloc_noio_{save,restore}() here.
Reported-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

- replace an ad-hoc array with a struct
- rename to calc_signature() for consistency
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

It's going to be used as a temporary buffer for in-place en/decryption
with ceph_crypt() instead of on-stack buffers, so rename to enc_buf.
Ensure alignment to avoid GFP_ATOMIC allocations in the crypto stack.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Starting with 4.9, kernel stacks may be vmalloced and therefore not
guaranteed to be physically contiguous; the new CONFIG_VMAP_STACK
option is enabled by default on x86.  This makes it invalid to use
on-stack buffers with the crypto scatterlist API, as sg_set_buf()
expects a logical address and won't work with vmalloced addresses.

There isn't a different (e.g. kvec-based) crypto API we could switch
net/ceph/crypto.c to and the current scatterlist.h API isn't getting
updated to accommodate this use case.  Allocating a new header and
padding for each operation is a non-starter, so do the en/decryption
in-place on a single pre-assembled (header + data + padding) heap
buffer.  This is explicitly supported by the crypto API:

    "... the caller may provide the same scatter/gather list for the
     plaintext and cipher text. After the completion of the cipher
     operation, the plaintext data is replaced with the ciphertext data
     in case of an encryption and vice versa for a decryption."
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Since commit 0a990e70 ("ceph: clean up service ticket decoding"),
th->session_key isn't assigned until everything is decoded.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Pass what's going to be encrypted - that's msg_b, not ticket_blob.
ceph_x_encrypt_buflen() returns the upper bound, so this doesn't change
the maxlen calculation, but makes it a bit clearer.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Pull MIPS fixes from Ralf Baechle:
 "Two more MIPS fixes for 4.9:

   - RTC: Return -ENODEV so an external RTC will be tried

   - Fix mask of GPE frequency

  These two have been tested on Imagination's automated test system and
  also both received positive reviews on the linux-mips mailing list"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Lantiq: Fix mask of GPE frequency
  MIPS: Return -ENODEV from weak implementation of rtc_mips_set_time

The hardware documentation says bit 11:10 are used for the GPE
frequency selection. Fix the mask in the define to match these bits.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NThomas Langer <thomas.langer@intel.com>
Cc: linux-mips@linux-mips.org
Cc: john@phrozen.org
Patchwork: https://patchwork.linux-mips.org/patch/14648/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The sync_cmos_clock function in kernel/time/ntp.c first tries to update
the internal clock of the cpu by calling the "update_persistent_clock64"
architecture specific function.  If this returns -ENODEV, it then tries
to update an external RTC using "rtc_set_ntp_time".

On the mips architecture, the weak implementation of the underlying
function would return 0 if it wasn't overridden.  This meant that the
sync_cmos_clock function would never try to update an external RTC
(if both CONFIG_GENERIC_CMOS_UPDATE and CONFIG_RTC_SYSTOHC are
configured)

Returning -ENODEV instead, means that an external RTC will be tried.
Signed-off-by: NLuuk Paulussen <luuk.paulussen@alliedtelesis.co.nz>
Reviewed-by: NRichard Laing <richard.laing@alliedtelesis.co.nz>
Reviewed-by: NScott Parlane <scott.parlane@alliedtelesis.co.nz>
Reviewed-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14649/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Fix pointer size when caam is used with AArch64 boot loader on
     AArch32 kernel.

   - Fix ahash state corruption in marvell driver.

   - Fix buggy algif_aed tag handling.

   - Prevent mcryptd from being used with incompatible algorithms which
     can cause crashes"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - fix uninitialized variable warning
  crypto: mcryptd - Check mcryptd algorithm compatibility
  crypto: algif_aead - fix AEAD tag memory handling
  crypto: caam - fix pointer size for AArch64 boot loader, AArch32 kernel
  crypto: marvell - Don't corrupt state of an STD req for re-stepped ahash
  crypto: marvell - Don't copy hash operation twice into the SRAM

Pull networking fixes from David Miller:

 1) Limit the number of can filters to avoid > MAX_ORDER allocations.
    Fix from Marc Kleine-Budde.

 2) Limit GSO max size in netvsc driver to avoid problems with NVGRE
    configurations. From Stephen Hemminger.

 3) Return proper error when memory allocation fails in
    ser_gigaset_init(), from Dan Carpenter.

 4) Missing linkage undo in error paths of ipvlan_link_new(), from Gao
    Feng.

 5) Missing necessayr SET_NETDEV_DEV in lantiq and cpmac drivers, from
    Florian Fainelli.

 6) Handle probe deferral properly in smsc911x driver.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: mlx5: Fix Kconfig help text
  net: smsc911x: back out silently on probe deferrals
  ibmveth: set correct gso_size and gso_type
  net: ethernet: cpmac: Call SET_NETDEV_DEV()
  net: ethernet: lantiq_etop: Call SET_NETDEV_DEV()
  vhost-vsock: fix orphan connection reset
  cxgb4/cxgb4vf: Assign netdev->dev_port with port ID
  driver: ipvlan: Unlink the upper dev when ipvlan_link_new failed
  ser_gigaset: return -ENOMEM on error instead of success
  NET: usb: cdc_mbim: add quirk for supporting Telit LE922A
  can: peak: fix bad memory access and free sequence
  phy: Don't increment MDIO bus refcount unless it's a different owner
  netvsc: reduce maximum GSO size
  drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" links
  can: raw: raw_setsockopt: limit number of can_filter that can be set

Since the following commit, Infiniband and Ethernet have not been
mutually exclusive.

Fixes: 4aa17b28 mlx5: Enable mutual support for IB and Ethernet
Signed-off-by: NChristopher Covington <cov@codeaurora.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When trying to get a regulator we may get deferred and we see
this noise:

smsc911x 1b800000.ethernet-ebi2 (unnamed net_device) (uninitialized):
   couldn't get regulators -517

Then the driver continues anyway. Which means that the regulator
may not be properly retrieved and reference counted, and may be
switched off in case noone else is using it.

Fix this by returning silently on deferred probe and let the
system work it out.

Cc: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is based on an earlier one submitted
by Jon Maxwell with the following commit message:

"We recently encountered a bug where a few customers using ibmveth on the
same LPAR hit an issue where a TCP session hung when large receive was
enabled. Closer analysis revealed that the session was stuck because the
one side was advertising a zero window repeatedly.

We narrowed this down to the fact the ibmveth driver did not set gso_size
which is translated by TCP into the MSS later up the stack. The MSS is
used to calculate the TCP window size and as that was abnormally large,
it was calculating a zero window, even although the sockets receive buffer
was completely empty."

We rely on the Virtual I/O Server partition in a pseries
environment to provide the MSS through the TCP header checksum
field. The stipulation is that users should not disable checksum
offloading if rx packet aggregation is enabled through VIOS.

Some firmware offerings provide the MSS in the RX buffer.
This is signalled by a bit in the RX queue descriptor.
Reviewed-by: NBrian King <brking@linux.vnet.ibm.com>
Reviewed-by: NPradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: NJonathan Maxwell <jmaxwell37@gmail.com>
Reviewed-by: NDavid Dai <zdai@us.ibm.com>
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull libnvdimm fixes from Dan Williams:
 "Several fixes to the DSM (ACPI device specific method) marshaling
  implementation.

  I consider these urgent enough to send for 4.9 consideration since
  they fix the kernel's handling of ARS (Address Range Scrub) commands.
  Especially for platforms without machine-check-recovery capabilities,
  successful execution of ARS commands enables the platform to
  potentially break out of an infinite reboot problem if a media error
  is present in the boot path. There is also a one line fix for a
  device-dax read-only mapping regression.

  Commits 9a901f54 ("acpi, nfit: fix extended status translations
  for ACPI DSMs") and 325896ff ("device-dax: fix private mapping
  restriction, permit read-only") are true regression fixes for changes
  introduced this cycle.

  Commit efda1b5d ("acpi, nfit, libnvdimm: fix / harden ars_status
  output length handling") fixes the kernel's handling of zero-length
  results, this never would have worked in the past, but we only just
  recently discovered a BIOS implementation that emits this arguably
  spec non-compliant result.

  The remaining two commits are additional fall out from thinking
  through the implications of a zero / truncated length result of the
  ARS Status command.

  In order to mitigate the risk that these changes introduce yet more
  regressions they are backstopped by a new unit test in commit
  a7de92da ("tools/testing/nvdimm: unit test acpi_nfit_ctl()") that
  mocks up inputs to acpi_nfit_ctl()"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix private mapping restriction, permit read-only
  tools/testing/nvdimm: unit test acpi_nfit_ctl()
  acpi, nfit: fix bus vs dimm confusion in xlat_status
  acpi, nfit: validate ars_status output buffer size
  acpi, nfit, libnvdimm: fix / harden ars_status output length handling
  acpi, nfit: fix extended status translations for ACPI DSMs

Pull libata fixes from Tejun Heo:
 "This is quite late but SCT Write Same support added during this cycle
  is broken subtly but seriously and it'd be best to disable it before
  v4.9 gets released.

  This contains two commits - one low impact sata_mv fix and the
  mentioned disabling of SCT Write Same"

* 'for-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata-scsi: disable SCT Write Same for the moment
  ata: sata_mv: check for errors when parsing nr-ports from dt

Pull ceph fix from Ilya Dryomov:
 "A fix for an issue with ->d_revalidate() in ceph, causing frequent
  kernel crashes.

  Marked for stable - it goes back to 4.6, but started popping up only
  in 4.8"

* tag 'ceph-for-4.9-rc9' of git://github.com/ceph/ceph-client:
  ceph: don't set req->r_locked_dir in ceph_d_revalidate

Pull ARM SoC fixes from Olof Johansson:
 "Final batch of SoC fixes

  A few fixes that have trickled in over the last week, all fixing minor
  errors in devicetrees -- UART pin assignment on Allwinner H3,
  correcting number of SATA ports on a Marvell-based Linkstation
  platform and a display clock fix for Freescale/NXP i.MX7D that fixes a
  freeze when starting up X"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: orion5x: fix number of sata port for linkstation ls-gl
  ARM: dts: imx7d: fix LCDIF clock assignment
  dts: sun8i-h3: correct UART3 pin definitions

Pull m68k fixes from Geert Uytterhoeven:

 - build fix for drivers calling ndelay() in a conditional block without
   curly braces

 - defconfig updates

* tag 'm68k-for-v4.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix ndelay() macro
  m68k/defconfig: Update defconfigs for v4.9-rc1

Pull drm fix from Dave Airlie:
 "Just a single fix for amdgpu to just suspend the gpu on 'shutdown'
  instead of shutting it down fully, as for some reason the hw was
  getting upset in some situations"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu: just suspend the hw on pci shutdown

This reverts commit 53855d10.

It shouldn't have come in yet - it depends on the changes in linux-next
that will come in during the next merge window.  As Matthew Wilcox says,
the test suite is broken with the current state without the revert.
Requested-by: NMatthew Wilcox <mawilcox@microsoft.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Florian Fainelli says:

====================
net: ethernet: Make sure we set dev->dev.parent

This patch series builds atop:

ec988ad7 ("phy: Don't increment MDIO
bus refcount unless it's a different owner")

FMAN is the one that potentially needs patching as well (call
SET_NETDEV_DEV), but there appears to be no way that init_phy is
called right now, or there is not such an in-tree user. Madalin, can
you comment on that?
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The TI CPMAC driver calls into PHYLIB which now checks for
net_device->dev.parent, so make sure we do set it before calling into
any MDIO/PHYLIB related function.

Fixes: ec988ad7 ("phy: Don't increment MDIO bus refcount unless it's a different owner")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>