- 21 10月, 2010 1 次提交
-
-
由 Arnd Bergmann 提交于
With all the patches we have queued in the BKL removal tree, only a few dozen modules are left that actually rely on the BKL, and even there are lots of low-hanging fruit. We need to decide what to do about them, this patch illustrates one of the options: Every user of the BKL is marked as 'depends on BKL' in Kconfig, and the CONFIG_BKL becomes a user-visible option. If it gets disabled, no BKL using module can be built any more and the BKL code itself is compiled out. The one exception is file locking, which is practically always enabled and does a 'select BKL' instead. This effectively forces CONFIG_BKL to be enabled until we have solved the fs/lockd mess and can apply the patch that removes the BKL from fs/locks.c. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
- 19 10月, 2010 1 次提交
-
-
由 Peter Zijlstra 提交于
Provide a mechanism that allows running code in IRQ context. It is most useful for NMI code that needs to interact with the rest of the system -- like wakeup a task to drain buffers. Perf currently has such a mechanism, so extract that and provide it as a generic feature, independent of perf so that others may also benefit. The IRQ context callback is generated through self-IPIs where possible, or on architectures like powerpc the decrementer (the built-in timer facility) is set to generate an interrupt immediately. Architectures that don't have anything like this get to do with a callback from the timer tick. These architectures can call irq_work_run() at the tail of any IRQ handlers that might enqueue such work (like the perf IRQ handler) to avoid undue latencies in processing the work. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> [ various fixes ] Signed-off-by: NHuang Ying <ying.huang@intel.com> LKML-Reference: <1287036094.7768.291.camel@yhuang-dev> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 10月, 2010 1 次提交
-
-
由 Thomas Gleixner 提交于
The generic irq Kconfig options are copied around all archs. Provide a generic Kconfig file which can be included. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121843.217333624@linutronix.de> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Reviewed-by: NIngo Molnar <mingo@elte.hu>
-
- 16 9月, 2010 1 次提交
-
-
由 Vivek Goyal 提交于
o Actual implementation of throttling policy in block layer. Currently it implements READ and WRITE bytes per second throttling logic. IOPS throttling comes in later patches. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 20 8月, 2010 3 次提交
-
-
由 Paul E. McKenney 提交于
Implement a small-memory-footprint uniprocessor-only implementation of preemptible RCU. This implementation uses but a single blocked-tasks list rather than the combinatorial number used per leaf rcu_node by TREE_PREEMPT_RCU, which reduces memory consumption and greatly simplifies processing. This version also takes advantage of uniprocessor execution to accelerate grace periods in the case where there are no readers. The general design is otherwise broadly similar to that of TREE_PREEMPT_RCU. This implementation is a step towards having RCU implementation driven off of the SMP and PREEMPT kernel configuration variables, which can happen once this implementation has accumulated sufficient experience. Removed ACCESS_ONCE() from __rcu_read_unlock() and added barrier() as suggested by Steve Rostedt in order to avoid the compiler-reordering issue noted by Mathieu Desnoyers (http://lkml.org/lkml/2010/8/16/183). As can be seen below, CONFIG_TINY_PREEMPT_RCU represents almost 5Kbyte savings compared to CONFIG_TREE_PREEMPT_RCU. Of course, for non-real-time workloads, CONFIG_TINY_RCU is even better. CONFIG_TREE_PREEMPT_RCU text data bss dec filename 13 0 0 13 kernel/rcupdate.o 6170 825 28 7023 kernel/rcutree.o ---- 7026 Total CONFIG_TINY_PREEMPT_RCU text data bss dec filename 13 0 0 13 kernel/rcupdate.o 2081 81 8 2170 kernel/rcutiny.o ---- 2183 Total CONFIG_TINY_RCU (non-preemptible) text data bss dec filename 13 0 0 13 kernel/rcupdate.o 719 25 0 744 kernel/rcutiny.o --- 757 Total Requested-by: NLoïc Minier <loic.minier@canonical.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Paul E. McKenney 提交于
Commit cf244dc0 added a fourth level to the TREE_RCU hierarchy, but the RCU_FANOUT help message still said "cube root". This commit fixes this to "fourth root" and also emphasizes that production systems are well-served by the default. (Stress-testing RCU itself uses small RCU_FANOUT values in order to test large-system code paths on small(er) systems.) Located-by: NJohn Kacur <jkacur@redhat.com> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Paul E. McKenney 提交于
Because both TINY_RCU and TREE_PREEMPT_RCU have been in mainline for several releases, it is time to restrict the use of TREE_RCU to SMP non-preemptible systems. This reduces testing/validation effort. This commit is a first step towards driving the selection of RCU implementation directly off of the SMP and PREEMPT configuration parameters. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
- 11 8月, 2010 1 次提交
-
-
由 KAMEZAWA Hiroyuki 提交于
It's 11 months since we changed swap_map[] to indicates SWAP_HAS_CACHE. Since that, memcg's swap accounting has been very stable and it seems it can be maintained. So, I'd like to remove EXPERIMENTAL from the config. Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 7月, 2010 3 次提交
-
-
由 Eric Paris 提交于
Audit watch should depend on CONFIG_AUDIT_SYSCALL and should select FSNOTIFY. This splits the spagetti like mixing of audit_watch and audit_filter code so they can be configured seperately. Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
CONFIG_AUDIT builds audit_watches which depend on fsnotify. Make CONFIG_AUDIT select fsnotify. Reported-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
Simply switch audit_trees from using inotify to using fsnotify for it's inode pinning and disappearing act information. Signed-off-by: NEric Paris <eparis@redhat.com>
-
- 23 7月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
slow-work doesn't have any user left. Kill it. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NDavid Howells <dhowells@redhat.com>
-
- 16 5月, 2010 2 次提交
-
-
由 Frederic Weisbecker 提交于
This new config is deemed to simplify even more the lockup detector dependencies and can make it easier to bring a smooth sorting between archs that support the new generic lockup detector and those that still have their own, especially for those that are in the middle of this migration. Instead of checking whether we have CONFIG_LOCKUP_DETECTOR + CONFIG_PERF_EVENTS_NMI each time an arch wants to know if it needs to build its own lockup detector, take a shortcut with this new config. It is enabled only if the hardlockup detection part of the whole lockup detector is on. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Don Zickus <dzickus@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com>
-
由 Frederic Weisbecker 提交于
CONFIG_PERF_EVENT_NMI is something that need to be enabled from the arch. This is fine on x86 as PERF_EVENTS is builtin but if other archs select it, they will need to handle the PERF_EVENTS dependency. Instead, handle the dependency in the generic layer: - archs need to tell what they support through HAVE_PERF_EVENTS_NMI - Enable magically PERF_EVENTS_NMI if we have PERF_EVENTS and HAVE_PERF_EVENTS_NMI. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Don Zickus <dzickus@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com>
-
- 13 5月, 2010 1 次提交
-
-
由 Don Zickus 提交于
The new nmi_watchdog (which uses the perf event subsystem) is very similar in structure to the softlockup detector. Using Ingo's suggestion, I combined the two functionalities into one file: kernel/watchdog.c. Now both the nmi_watchdog (or hardlockup detector) and softlockup detector sit on top of the perf event subsystem, which is run every 60 seconds or so to see if there are any lockups. To detect hardlockups, cpus not responding to interrupts, I implemented an hrtimer that runs 5 times for every perf event overflow event. If that stops counting on a cpu, then the cpu is most likely in trouble. To detect softlockups, tasks not yielding to the scheduler, I used the previous kthread idea that now gets kicked every time the hrtimer fires. If the kthread isn't being scheduled neither is anyone else and the warning is printed to the console. I tested this on x86_64 and both the softlockup and hardlockup paths work. V2: - cleaned up the Kconfig and softlockup combination - surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI - seperated out the softlockup case from perf event subsystem - re-arranged the enabling/disabling nmi watchdog from proc space - added cpumasks for hardlockup failure cases - removed fallback to soft events if no PMU exists for hard events V3: - comment cleanups - drop support for older softlockup code - per_cpu cleanups - completely remove software clock base hardlockup detector - use per_cpu masking on hard/soft lockup detection - #ifdef cleanups - rename config option NMI_WATCHDOG to LOCKUP_DETECTOR - documentation additions V4: - documentation fixes - convert per_cpu to __get_cpu_var - powerpc compile fixes V5: - split apart warn flags for hard and soft lockups TODO: - figure out how to make an arch-agnostic clock2cycles call (if possible) to feed into perf events as a sample period [fweisbec: merged conflict patch] Signed-off-by: NDon Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
-
- 27 4月, 2010 1 次提交
-
-
由 Vivek Goyal 提交于
This patch fixes few usability and configurability issues. o All the cgroup based controller options are configurable from "Genral Setup/Control Group Support/" menu. blkio is the only exception. Hence make this option visible in above menu and make it configurable from there to bring it inline with rest of the cgroup based controllers. o Get rid of CONFIG_DEBUG_CFQ_IOSCHED. This option currently does two things. - Enable printing of cgroup paths in blktrace - Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat files in cgroup. If we are using group scheduling, blktrace data is of not really much use if cgroup information is not present. To get this data, currently one has to also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of all the additional debug stat files which is not desired. Hence, this patch moves printing of cgroup paths under CONFIG_CFQ_GROUP_IOSCHED. This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which can be enabled through config menu. Signed-off-by: NVivek Goyal <vgoyal@redhat.com> Acked-by: NDivyesh Shah <dpshah@google.com> Reviewed-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 03 4月, 2010 1 次提交
-
-
由 Li Zefan 提交于
This is left over from commit 7c941438 ("sched: Remove USER_SCHED"") Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Acked-by: NDhaval Giani <dhaval.giani@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: David Howells <dhowells@redhat.com> LKML-Reference: <4BA9A05F.7010407@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 3月, 2010 1 次提交
-
-
由 Kirill A. Shutemov 提交于
This patchset introduces eventfd-based API for notifications in cgroups and implements memory notifications on top of it. It uses statistics in memory controler to track memory usage. Output of time(1) on building kernel on tmpfs: Root cgroup before changes: make -j2 506.37 user 60.93s system 193% cpu 4:52.77 total Non-root cgroup before changes: make -j2 507.14 user 62.66s system 193% cpu 4:54.74 total Root cgroup after changes (0 thresholds): make -j2 507.13 user 62.20s system 193% cpu 4:53.55 total Non-root cgroup after changes (0 thresholds): make -j2 507.70 user 64.20s system 193% cpu 4:55.70 total Root cgroup after changes (1 thresholds, never crossed): make -j2 506.97 user 62.20s system 193% cpu 4:53.90 total Non-root cgroup after changes (1 thresholds, never crossed): make -j2 507.55 user 64.08s system 193% cpu 4:55.63 total This patch: Introduce the write-only file "cgroup.event_control" in every cgroup. To register new notification handler you need: - create an eventfd; - open a control file to be monitored. Callbacks register_event() and unregister_event() must be defined for the control file; - write "<event_fd> <control_fd> <args>" to cgroup.event_control. Interpretation of args is defined by control file implementation; eventfd will be woken up by control file implementation or when the cgroup is removed. To unregister notification handler just close eventfd. If you need notification functionality for a control file you have to implement callbacks register_event() and unregister_event() in the struct cftype. [kamezawa.hiroyu@jp.fujitsu.com: Kconfig fix] Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Paul Menage <menage@google.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Dan Malek <dan@embeddedalley.com> Cc: Vladislav Buzov <vbuzov@embeddedalley.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Alexander Shishkin <virtuoso@slind.org> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 2月, 2010 1 次提交
-
-
由 Robert Richter 提交于
OProfile is already used for a long time and no longer experimental. Signed-off-by: NRobert Richter <robert.richter@amd.com>
-
- 25 2月, 2010 1 次提交
-
-
由 Paul E. McKenney 提交于
Currently, rcu_needs_cpu() simply checks whether the current CPU has an outstanding RCU callback, which means that the last CPU to go into dyntick-idle mode might wait a few ticks for the relevant grace periods to complete. However, if all the other CPUs are in dyntick-idle mode, and if this CPU is in a quiescent state (which it is for RCU-bh and RCU-sched any time that we are considering going into dyntick-idle mode), then the grace period is instantly complete. This patch therefore repeatedly invokes the RCU grace-period machinery in order to force any needed grace periods to complete quickly. It does so a limited number of times in order to prevent starvation by an RCU callback function that might pass itself to call_rcu(). However, if any CPU other than the current one is not in dyntick-idle mode, fall back to simply checking (with fix to bug noted by Lai Jiangshan). Also, take advantage of last grace-period forcing, the opportunity to do so noted by Steve Rostedt. And apply simplified #ifdef condition suggested by Frederic Weisbecker. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 2月, 2010 1 次提交
-
-
由 Don Zickus 提交于
Determines if an arch has setup arch specific perf_events and nmi_watchdog code. This should restrict compiles to only those arches ready. Signed-off-by: NDon Zickus <dzickus@redhat.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: aris@redhat.com LKML-Reference: <1266013161-31197-1-git-send-email-dzickus@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 02 2月, 2010 1 次提交
-
-
由 Roland McGrath 提交于
This adds CROSS_COMPILE as a kconfig string so you can store it in .config. Then you can use plain "make" in the configured kernel build directory to do the right cross compilation without setting the command-line or environment variable every time. With this, you can set up different build directories for different kernel configurations, whether native or cross-builds, and then use the simple: make -C /build/dir M=module-source-dir idiom to build modules for any given target kernel, indicating which one by nothing but the build directory chosen. I tried a version that defaults the string with env="CROSS_COMPILE" so that in a "make oldconfig" with CROSS_COMPILE in the environment you can just hit return to store the way you're building it. But the kconfig prompt for strings doesn't give you any way to say you want an empty string instead of the default, so I punted that. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Anibal Monsalve Salazar <anibal@debian.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMichal Marek <mmarek@suse.cz>
-
- 21 1月, 2010 1 次提交
-
-
由 Dhaval Giani 提交于
Remove the USER_SCHED feature. It has been scheduled to be removed in 2.6.34 as per http://marc.info/?l=linux-kernel&m=125728479022976&w=2Signed-off-by: NDhaval Giani <dhaval.giani@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1263990378.24844.3.camel@localhost> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 1月, 2010 1 次提交
-
-
由 Albin Tonnerre 提交于
This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: NWu Zhangjin <wuzhangjin@gmail.com> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: NRussell King <rmk@arm.linux.org.uk> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 1月, 2010 1 次提交
-
-
由 Steffen Klassert 提交于
This patch introduces an interface to process data objects in parallel. The parallelized objects return after serialization in the same order as they were before the parallelization. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 28 12月, 2009 1 次提交
-
-
由 Li Zefan 提交于
Quoted from Ingo: | This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE - | it's an unnecessary Kconfig complication. If both PERF_EVENTS and | EVENT_TRACING is enabled we should expose generic tracepoints. | | Nor is it limited to event 'profiling', so it has become a misnomer as | well. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 12月, 2009 1 次提交
-
-
由 Jie Zhang 提交于
The NOMMU code currently clears all anonymous mmapped memory. While this is what we want in the default case, all memory allocation from userspace under NOMMU has to go through this interface, including malloc() which is allowed to return uninitialized memory. This can easily be a significant performance penalty. So for constrained embedded systems were security is irrelevant, allow people to avoid clearing memory unnecessarily. This also alters the ELF-FDPIC binfmt such that it obtains uninitialised memory for the brk and stack region. Signed-off-by: NJie Zhang <jie.zhang@analog.com> Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NGreg Ungerer <gerg@snapgear.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 12月, 2009 1 次提交
-
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Greg KH <gregkh@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 12月, 2009 2 次提交
-
-
由 Randy Dunlap 提交于
The SYSFS_DEPRECATED_V2 says "remove" older, deprecated features, but it actually enables them, so correct this confusing, backwards text. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Move slow_work's debugging proc file to debugfs. Signed-off-by: NDavid Howells <dhowells@redhat.com> Requested-and-acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 11月, 2009 1 次提交
-
-
由 David Howells 提交于
Allow the executing and queued work items to be viewed through a /proc file for debugging purposes. The contents look something like the following: THR PID ITEM ADDR FL MARK DESC === ===== ================ == ===== ========== 0 3005 ffff880023f52348 a 952ms FSC: OBJ17d3: LOOK 1 3006 ffff880024e33668 2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2 2 3165 ffff8800296dd180 a 424ms FSC: OBJ17e4: LOOK 3 4089 ffff8800262c8d78 a 212ms FSC: OBJ17ea: CRTN 4 4090 ffff88002792bed8 2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2 5 4092 ffff88002a0ef308 2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2 6 4094 ffff88002abaf4b8 2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2 7 4095 ffff88002bb188e0 a 388ms FSC: OBJ17e9: CRTN vsq - ffff880023d99668 1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2 vsq - ffff8800295d1740 1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2 vsq - ffff880025ba3308 1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2 vsq - ffff880024ec83e0 1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2 vsq - ffff880026618e00 1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2 vsq - ffff880025a2a4b8 1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2 vsq - ffff880023cbe6d8 9 212ms FSC: OBJ17eb: LOOK vsq - ffff880024d37590 9 212ms FSC: OBJ17ec: LOOK vsq - ffff880027746cb0 9 212ms FSC: OBJ17ed: LOOK vsq - ffff880024d37ae8 9 212ms FSC: OBJ17ee: LOOK vsq - ffff880024d37cb0 9 212ms FSC: OBJ17ef: LOOK vsq - ffff880025036550 9 212ms FSC: OBJ17f0: LOOK vsq - ffff8800250368e0 9 212ms FSC: OBJ17f1: LOOK vsq - ffff880025036aa8 9 212ms FSC: OBJ17f2: LOOK In the 'THR' column, executing items show the thread they're occupying and queued threads indicate which queue they're on. 'PID' shows the process ID of a slow-work thread that's executing something. 'FL' shows the work item flags. 'MARK' indicates how long since an item was queued or began executing. Lastly, the 'DESC' column permits the owner of an item to give some information. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 14 11月, 2009 1 次提交
-
-
由 Thomas Gleixner 提交于
commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
-
- 11 11月, 2009 1 次提交
-
-
由 Eric W. Biederman 提交于
To simply maintenance and to be able to remove all of the binary sysctl support from various subsystems I have rewritten the binary sysctl code as a compatibility wrapper around proc/sys. The code is built around a hard coded table based on the table in sysctl_check.c that lists all of our current binary sysctls and provides enough information to convert from the sysctl binary input into into ascii and back again. New in this patch is the realization that the only dynamic entries that need to be handled have ifname as the asscii string and ifindex as their ctl_name. When a sys_sysctl is called the code now looks in the translation table converting the binary name to the path under /proc where the value is to be found. Opens that file, and calls into a format conversion wrapper that calls fop->read and then fop->write as appropriate. Since in practice the practically no one uses or tests sys_sysctl rewritting the code to be beautiful is a little silly. The redeeming merit of this work is it allows us to rip out all of the binary sysctl syscall support from everywhere else in the tree. Allowing us to remove a lot of dead (after this patch) and barely maintained code. In addition it becomes much easier to optimize the sysctl implementation for being the backing store of /proc/sys, without having to worry about sys_sysctl. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
-
- 02 11月, 2009 1 次提交
-
-
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: trivial@kernel.org LKML-Reference: <1256938346-8230-1-git-send-email-cascardo@holoscopio.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 10月, 2009 1 次提交
-
-
由 Kumar Gala 提交于
We dont need to depend on PPC64 explicitly as all powerpc platforms (32-bit and 64-bit) define PPC now. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 26 10月, 2009 1 次提交
-
-
由 Paul E. McKenney 提交于
This patch is a version of RCU designed for !SMP provided for a small-footprint RCU implementation. In particular, the implementation of synchronize_rcu() is extremely lightweight and high performance. It passes rcutorture testing in each of the four relevant configurations (combinations of NO_HZ and PREEMPT) on x86. This saves about 1K bytes compared to old Classic RCU (which is no longer in mainline), and more than three kilobytes compared to Hierarchical RCU (updated to 2.6.30): CONFIG_TREE_RCU: text data bss dec filename 183 4 0 187 kernel/rcupdate.o 2783 520 36 3339 kernel/rcutree.o 3526 Total (vs 4565 for v7) CONFIG_TREE_PREEMPT_RCU: text data bss dec filename 263 4 0 267 kernel/rcupdate.o 4594 776 52 5422 kernel/rcutree.o 5689 Total (6155 for v7) CONFIG_TINY_RCU: text data bss dec filename 96 4 0 100 kernel/rcupdate.o 734 24 0 758 kernel/rcutiny.o 858 Total (vs 848 for v7) The above is for x86. Your mileage may vary on other platforms. Further compression is possible, but is being procrastinated. Changes from v7 (http://lkml.org/lkml/2009/10/9/388) o Apply Lai Jiangshan's review comments (aside from might_sleep() in synchronize_sched(), which is covered by SMP builds). o Fix up expedited primitives. Changes from v6 (http://lkml.org/lkml/2009/9/23/293). o Forward ported to put it into the 2.6.33 stream. o Added lockdep support. o Make lightweight rcu_barrier. Changes from v5 (http://lkml.org/lkml/2009/6/23/12). o Ported to latest pre-2.6.32 merge window kernel. - Renamed rcu_qsctr_inc() to rcu_sched_qs(). - Renamed rcu_bh_qsctr_inc() to rcu_bh_qs(). - Provided trivial rcu_cpu_notify(). - Provided trivial exit_rcu(). - Provided trivial rcu_needs_cpu(). - Fixed up the rcu_*_enter/exit() functions in linux/hardirq.h. o Removed the dependence on EMBEDDED, with a view to making TINY_RCU default for !SMP at some time in the future. o Added (trivial) support for expedited grace periods. Changes from v4 (http://lkml.org/lkml/2009/5/2/91) include: o Squeeze the size down a bit further by removing the ->completed field from struct rcu_ctrlblk. o This permits synchronize_rcu() to become the empty function. Previous concerns about rcutorture were unfounded, as rcutorture correctly handles a constant value from rcu_batches_completed() and rcu_batches_completed_bh(). Changes from v3 (http://lkml.org/lkml/2009/3/29/221) include: o Changed rcu_batches_completed(), rcu_batches_completed_bh() rcu_enter_nohz(), rcu_exit_nohz(), rcu_nmi_enter(), and rcu_nmi_exit(), to be static inlines, as suggested by David Howells. Doing this saves about 100 bytes from rcutiny.o. (The numbers between v3 and this v4 of the patch are not directly comparable, since they are against different versions of Linux.) Changes from v2 (http://lkml.org/lkml/2009/2/3/333) include: o Fix whitespace issues. o Change short-circuit "||" operator to instead be "+" in order to fix performance bug noted by "kraai" on LWN. (http://lwn.net/Articles/324348/) Changes from v1 (http://lkml.org/lkml/2009/1/13/440) include: o This version depends on EMBEDDED as well as !SMP, as suggested by Ingo. o Updated rcu_needs_cpu() to unconditionally return zero, permitting the CPU to enter dynticks-idle mode at any time. This works because callbacks can be invoked upon entry to dynticks-idle mode. o Paul is now OK with this being included, based on a poll at the Kernel Miniconf at linux.conf.au, where about ten people said that they cared about saving 900 bytes on single-CPU systems. o Applies to both mainline and tip/core/rcu. Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDavid Howells <dhowells@redhat.com> Acked-by: NJosh Triplett <josh@joshtriplett.org> Reviewed-by: NLai Jiangshan <laijs@cn.fujitsu.com> Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: avi@redhat.com Cc: mtosatti@redhat.com LKML-Reference: <12565226351355-git-send-email-> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 06 10月, 2009 1 次提交
-
-
由 Peter Zijlstra 提交于
Some architectures such as Sparc, ARM and MIPS (basically everything with flush_dcache_page()) need to deal with dcache aliases by carefully placing pages in both kernel and user maps. These architectures typically have to use vmalloc_user() for this. However, on other architectures, vmalloc() is not needed and has the downsides of being more restricted and slower than regular allocations. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NDavid Miller <davem@davemloft.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1254830228.21044.272.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 9月, 2009 2 次提交
-
-
由 Ingo Molnar 提交于
- provide compatibility Kconfig entry for existing PERF_COUNTERS .config's - provide courtesy copy of old perf_counter.h, for user-space projects - small indentation fixups - fix up MAINTAINERS - fix small x86 printout fallout - fix up small PowerPC comment fallout (use 'counter' as in register) Reviewed-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: NStephane Eranian <eranian@google.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NPaul Mackerras <paulus@samba.org> Reviewed-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 9月, 2009 1 次提交
-
-
由 Randy Dunlap 提交于
Sam suggested moving STRIP_ASM_SYMS into the Kernel hacking menu from the General Setup menu. It makes more sense there. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-