Help was missing during some items reorganization. Add them.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of showing the option to show debug at the end, show
it after each driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead of having 3 options to allow customizing the media
sub-drivers (tuners, I2C drivers, frontends), merge all of
them into just one.

That simplifies the life for users, as they can just keep
this untouched.

Life for developers is also simpler, as there's now just
one Kconfig item to remember, for the ancillary sub-drivers
providing supports for chips that could change from one
board design to another.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This allows disabling all drivers of a certain type as a hole
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

- get rid of ridden V4L2_COMMON symbol

  This symbol is not needed anymore; it can be folded with V4L2
  one, simplifying the Kconfig a little bit;

- Comment why some Kconfig items are needed;

- Remove if test for MEDIA_CAMERA_SUPPORT, replacing it by
  depends on.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Vivi is not that important to appear at the main menu, so move it
to its own submenu. Also, the mem2mem test device driver is
similar to vivi. So, put both at the same menu.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Reorganize the Kconfig order, for it to be a little more intuitive.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

That helps to better organize the soc_camera items.

While here, cleanup Makefiles, removing uneeded include dirs.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

	make[4]: *** No rule to make target `drivers/media/platform/sh_mobile_csi2.c',
	needed by `drivers/media/platform/sh_mobile_csi2.o'.  Stop.
Reported-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

ERROR: "b2c2_flexcop_debug" [drivers/media/pci/b2c2/b2c2-flexcop-pci.ko] undefined!
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On a few places, := were using instead of +=, causing drivers to
not compile.

While here, standardize the usage of += on all cases where multiple
lines are needed, and for obj-y/obj-m targets, and := when just one
line is needed, on <module>-obj rules.
Reported-by: NHans Verkuil <hverkuil@xs4all.nl>
Identified-by: NAntti Polosaari <crope@iki.fi>
Tested-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Netup cards revision 1 are not manufactured anymore.
So, rev. 4 should be default.
Signed-off-by: NAnton Nurkin <ptqa@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In JPEG mode, the size of image is variable due to different JPEG compression
rate. We only can get the pix->sizeimage from the user.

If we clear pix->sizeimage in soc_camera_try_fmt() then we will get it from:
	ret = soc_mbus_image_size(xlate->host_fmt, pix->bytesperline,
				pix->height);
	if (ret < 0)
		return ret;

	pix->sizeimage = max_t(u32, pix->sizeimage, ret);

In general, this sizeimage will be larger than the actul JPEG image size.

But vb2 will check the buffer and size of image in __qbuf_userptr():
	/* Check if the provided plane buffer is large enough */
	if (planes[plane].length < q->plane_sizes[plane])

So we shouldn't clear the pix->sizeimage and also shouldn't re-calculate
the pix->sizeimage in soc_mbus_image_size() in JPEG mode

We also shouldn't re-calculate pix->bytesperline:
	ret = soc_mbus_bytes_per_line(pix->width, xlate->host_fmt);
	if (ret < 0)
		return ret;

	pix->bytesperline = max_t(u32, pix->bytesperline, ret);

pix->bytesperline also should be set by the user or by the driver's
try_fmt() implementation.

Change-Id: I700690a2287346127a624b5260922eaa5427a596
Signed-off-by: NAlbert Wang <twang13@marvell.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch contains code change only to use the present macro-
MX3_CAMERA_DATAWIDTH_MASK to check valid camera platform data
bus width instead of enumerating every possible data bus width.
Signed-off-by: NLiu Ying <Ying.Liu@freescale.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Driver for mt9v022 camera sensor is fully compatible for mt9v024 camera sensor
with the exception of several registers which have been changed addresses.
mt9v024 also has improved and additional features, but they are currently not in use.
Signed-off-by: NAlex Gershgorin <alexg@meprolight.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On i.MX27 two clocks are required: emma-ipg and emma-ahb. The ahb clock
has to be requested using both a device and a connection ID.
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
[g.liakhovetski@gmx.de: rebase to the current media tree]
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch checks the state of the buffer when calling .buf_init() method.
This is needed for the USERPTR buffer type, because in that case
.buf_init() is called every time a buffer is queued, and not only once
during the preparation stage, like in the MMAP case. Without this check
buffers get initialised repeatedly, which also leads to the allocation
of new DMA descriptors, of which there is only a final relatively small
number available. Both MMAP and USERPTR methods were successfully tested.
Signed-off-by: NAlex Gershgorin <alexg@meprolight.com>
[g.liakhovetski@gmx.de: remove mx3_camera_buffer::state completely]
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

All these seems to survive .reset_resume.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

All these seems to survive .reset_resume.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add .reset_resume() support.
Also some other small changes for suspend / resume.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Move initial suspend / resume support from dvb_usb_v2 to dvb_frontend
as it is dvb general feature that could be used all dvb devices.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Put device full sleep on suspend, wake-up it on resume and acquire
retune in order to return same television channel.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We need to retune when resume from suspend.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The commit 98d7bbb9 changed *of_device_id.data to const
which introduced warnings in various places that have mostly
been fixed. This patch fixes one such warning by introducing
two const qualifiers.

GCC warning:
drivers/media/platform/coda.c:1785:16: warning:
        assignment discards ‘const’ qualifier
        from pointer target type [enabled by default]
Signed-off-by: NEmil Goode <emilgoode@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

debug_dump macro was defined twice when CONFIG_DVB_USB_DEBUG was
not set. Move debug_dump macro to correct place.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/usb/{s2255drv.c, tm6000/tm6000-alsa.c, tm6000/tm6000-input.c}: Remove potential NULL dereferences

If the NULL test is necessary, the initialization involving a dereference of
the tested value should be moved after the NULL test.

The sematic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

devm_* functions are device managed functions and make error handling
and cleanup cleaner and simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Replace printk with pr_* functions to silence checkpatch warnings.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

devm_regulator_get() is a device managed function and makes the exit code
a bit simpler and cleaner.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Using devm_kzalloc simplifies the code and ensures that the use of
devm_request_irq is safe.  When kzalloc and kfree were used, the interrupt
could be triggered after the handler's data argument had been freed.

This also introduces some missing initializations of the return variable
ret, and uses devm_request_and_ioremap instead of the combination of
devm_request_mem_region and devm_ioremap.

The problem of a free after a devm_request_irq was found using the
following semantic match (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression e1,e2,x,a,b,c,d;
identifier free;
position p1,p2;
@@

  devm_request_irq@p1(e1,e2,...,x)
  ... when any
      when != e2 = a
      when != x = b
  if (...) {
    ... when != e2 = c
        when != x = d
    free@p2(...,x,...);
    ...
    return ...;
  }
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

More validation fixes as reported by xmllint.

There are still three xmllint errors after this remaining regarding SVG file support.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

"card" is a valid pointer here because we checked snd_card_create() for
error returns.  Checking after a dereference makes the static checkers
complain.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There are some unlocks missing on error.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We recently added locking to this function, but there was an error path
which accidentally returned holding a lock.  Also we returned zero on
failure on some paths instead of the error code.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We need to move the unlock before the kfree(dev);
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This code looks suspicious, but it turns out that "nv" is an array of u8
so sizeof() is the same as ARRAY_SIZE().  Using ARRAY_SIZE() is more
readable though.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add .get_selection() and .set_selection() soc-camera host driver
operations. Additionally check, that the user is not trying to change the
output sizes during a running capture.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add explicit conversions from UYVY and YUYV to YUYV so that
csicr1 configuration can be set properly for each format.
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>