Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 15 5月, 2019 15 次提交
  3. 08 5月, 2019 1 次提交
  5. 02 5月, 2019 1 次提交
    • S
      x86/fpu: Don't export __kernel_fpu_{begin,end}() · d4ff57d0
      由 Sebastian Andrzej Siewior 提交于 
      commit 12209993e98c5fa1855c467f22a24e3d5b8be205 upstream.

There is one user of __kernel_fpu_begin() and before invoking it,
it invokes preempt_disable(). So it could invoke kernel_fpu_begin()
right away. The 32bit version of arch_efi_call_virt_setup() and
arch_efi_call_virt_teardown() does this already.

The comment above *kernel_fpu*() claims that before invoking
__kernel_fpu_begin() preemption should be disabled and that KVM is a
good example of doing it. Well, KVM doesn't do that since commit

  f775b13e ("x86,kvm: move qemu/guest FPU switching out to vcpu_run")

so it is not an example anymore.

With EFI gone as the last user of __kernel_fpu_{begin|end}(), both can
be made static and not exported anymore.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NRik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181129150210.2k4mawt37ow6c2vq@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d4ff57d0
  7. 27 4月, 2019 3 次提交
  9. 20 4月, 2019 5 次提交
  11. 06 4月, 2019 1 次提交
    • R
      x86/build: Mark per-CPU symbols as absolute explicitly for LLD · 648b949b
      由 Rafael Ávila de Espíndola 提交于 
      [ Upstream commit d071ae09a4a1414c1433d5ae9908959a7325b0ad ]

Accessing per-CPU variables is done by finding the offset of the
variable in the per-CPU block and adding it to the address of the
respective CPU's block.

Section 3.10.8 of ld.bfd's documentation states:

  For expressions involving numbers, relative addresses and absolute
  addresses, ld follows these rules to evaluate terms:

  Other binary operations, that is, between two relative addresses
  not in the same section, or between a relative address and an
  absolute address, first convert any non-absolute term to an
  absolute address before applying the operator."

Note that LLVM's linker does not adhere to the GNU ld's implementation
and as such requires implicitly-absolute terms to be explicitly marked
as absolute in the linker script. If not, it fails currently with:

  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute
  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute
  Makefile:1040: recipe for target 'vmlinux' failed

This is not a functional change for ld.bfd which converts the term to an
absolute symbol anyways as specified above.

Based on a previous submission by Tri Vo <trong@android.com>.
Reported-by: NDmitry Golovin <dima@golovin.in>
Signed-off-by: NRafael Ávila de Espíndola <rafael@espindo.la>
[ Update commit message per Boris' and Michael's suggestions. ]
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
[ Massage commit message more, fix typos. ]
Signed-off-by: NBorislav Petkov <bp@suse.de>
Tested-by: NDmitry Golovin <dima@golovin.in>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Cao Jin <caoj.fnst@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tri Vo <trong@android.com>
Cc: dima@golovin.in
Cc: morbo@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181219190145.252035-1-ndesaulniers@google.comSigned-off-by: NSasha Levin <sashal@kernel.org>
      648b949b
  13. 27 3月, 2019 2 次提交
    • J
      x86/unwind: Add hardcoded ORC entry for NULL · 206a76a6
      由 Jann Horn 提交于 
      commit ac5ceccce5501e43d217c596e4ee859f2a3fef79 upstream.

When the ORC unwinder is invoked for an oops caused by IP==0,
it currently has no idea what to do because there is no debug information
for the stack frame of NULL.

But if RIP is NULL, it is very likely that the last successfully executed
instruction was an indirect CALL/JMP, and it is possible to unwind out in
the same way as for the first instruction of a normal function. Hardcode
a corresponding ORC entry.

With an artificially-added NULL call in prctl_set_seccomp(), before this
patch, the trace is:

Call Trace:
 ? __x64_sys_prctl+0x402/0x680
 ? __ia32_sys_prctl+0x6e0/0x6e0
 ? __do_page_fault+0x457/0x620
 ? do_syscall_64+0x6d/0x160
 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9

After this patch, the trace looks like this:

Call Trace:
 __x64_sys_prctl+0x402/0x680
 ? __ia32_sys_prctl+0x6e0/0x6e0
 ? __do_page_fault+0x457/0x620
 do_syscall_64+0x6d/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

prctl_set_seccomp() still doesn't show up in the trace because for some
reason, tail call optimization is only disabled in builds that use the
frame pointer unwinder.
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: syzbot <syzbot+ca95b2b7aef9e7cbd6ab@syzkaller.appspotmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/20190301031201.7416-2-jannh@google.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      206a76a6
    • J
      x86/unwind: Handle NULL pointer calls better in frame unwinder · 367ccafb
      由 Jann Horn 提交于 
      commit f4f34e1b82eb4219d8eaa1c7e2e17ca219a6a2b5 upstream.

When the frame unwinder is invoked for an oops caused by a call to NULL, it
currently skips the parent function because BP still points to the parent's
stack frame; the (nonexistent) current function only has the first half of
a stack frame, and BP doesn't point to it yet.

Add a special case for IP==0 that calculates a fake BP from SP, then uses
the real BP for the next frame.

Note that this handles first_frame specially: Return information about the
parent function as long as the saved IP is >=first_frame, even if the fake
BP points below it.

With an artificially-added NULL call in prctl_set_seccomp(), before this
patch, the trace is:

Call Trace:
 ? prctl_set_seccomp+0x3a/0x50
 __x64_sys_prctl+0x457/0x6f0
 ? __ia32_sys_prctl+0x750/0x750
 do_syscall_64+0x72/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

After this patch, the trace is:

Call Trace:
 prctl_set_seccomp+0x3a/0x50
 __x64_sys_prctl+0x457/0x6f0
 ? __ia32_sys_prctl+0x750/0x750
 do_syscall_64+0x72/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: syzbot <syzbot+ca95b2b7aef9e7cbd6ab@syzkaller.appspotmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/20190301031201.7416-1-jannh@google.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      367ccafb
  15. 24 3月, 2019 1 次提交
  17. 14 3月, 2019 2 次提交
    • K
      x86/kexec: Don't setup EFI info if EFI runtime is not enabled · e2b45446
      由 Kairui Song 提交于 
      [ Upstream commit 2aa958c99c7fd3162b089a1a56a34a0cdb778de1 ]

Kexec-ing a kernel with "efi=noruntime" on the first kernel's command
line causes the following null pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  #PF error: [normal kernel read fault]
  Call Trace:
   efi_runtime_map_copy+0x28/0x30
   bzImage64_load+0x688/0x872
   arch_kexec_kernel_image_load+0x6d/0x70
   kimage_file_alloc_init+0x13e/0x220
   __x64_sys_kexec_file_load+0x144/0x290
   do_syscall_64+0x55/0x1a0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Just skip the EFI info setup if EFI runtime services are not enabled.

 [ bp: Massage commit message. ]
Suggested-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NKairui Song <kasong@redhat.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NDave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: bhe@redhat.com
Cc: David Howells <dhowells@redhat.com>
Cc: erik.schmauss@intel.com
Cc: fanc.fnst@cn.fujitsu.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kexec@lists.infradead.org
Cc: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: Philipp Rudo <prudo@linux.vnet.ibm.com>
Cc: rafael.j.wysocki@intel.com
Cc: robert.moore@intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yannik Sembritzki <yannik@sembritzki.me>
Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong@redhat.comSigned-off-by: NSasha Levin <sashal@kernel.org>
      e2b45446
    • T
      x86/microcode/amd: Don't falsely trick the late loading mechanism · f964a4d2
      由 Thomas Lendacky 提交于 
      [ Upstream commit 912139cfbfa6a2bc1da052314d2c29338dae1f6a ]

The load_microcode_amd() function searches for microcode patches and
attempts to apply a microcode patch if it is of different level than the
currently installed level.

While the processor won't actually load a level that is less than
what is already installed, the logic wrongly returns UCODE_NEW thus
signaling to its caller reload_store() that a late loading should be
attempted.

If the file-system contains an older microcode revision than what is
currently running, such a late microcode reload can result in these
misleading messages:

  x86/CPU: CPU features have changed after loading microcode, but might not take effect.
  x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.

These messages were issued on a system where SME/SEV are not
enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot,
early_detect_mem_encrypt() is called and cleared the SME and SEV
features in this case.

However, after the wrong late load attempt, get_cpu_cap() is called and
reloads the SME and SEV feature bits, resulting in the messages.

Update the microcode level check to not attempt microcode loading if the
current level is greater than(!) and not only equal to the current patch
level.

 [ bp: massage commit message. ]

Fixes: 2613f36e ("x86/microcode: Attempt late loading only when new microcode is present")
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlendack-t1.amdoffice.netSigned-off-by: NSasha Levin <sashal@kernel.org>
      f964a4d2
  19. 10 3月, 2019 1 次提交
  21. 06 3月, 2019 1 次提交
    • D
      irq/matrix: Spread managed interrupts on allocation · 8cae7757
      由 Dou Liyang 提交于 
      [ Upstream commit 76f99ae5b54d48430d1f0c5512a84da0ff9761e0 ]

Linux spreads out the non managed interrupt across the possible target CPUs
to avoid vector space exhaustion.

Managed interrupts are treated differently, as for them the vectors are
reserved (with guarantee) when the interrupt descriptors are initialized.

When the interrupt is requested a real vector is assigned. The assignment
logic uses the first CPU in the affinity mask for assignment. If the
interrupt has more than one CPU in the affinity mask, which happens when a
multi queue device has less queues than CPUs, then doing the same search as
for non managed interrupts makes sense as it puts the interrupt on the
least interrupt plagued CPU. For single CPU affine vectors that's obviously
a NOOP.

Restructre the matrix allocation code so it does the 'best CPU' search, add
the sanity check for an empty affinity mask and adapt the call site in the
x86 vector management code.

[ tglx: Added the empty mask check to the core and improved change log ]
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20180908175838.14450-2-dou_liyang@163.comSigned-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8cae7757
  23. 13 2月, 2019 2 次提交
    • T
      x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out() · 5b27e3bc
      由 Tony Luck 提交于 
      commit d28af26faa0b1daf3c692603d46bc4687c16f19e upstream.

Internal injection testing crashed with a console log that said:

  mce: [Hardware Error]: CPU 7: Machine Check Exception: f Bank 0: bd80000000100134

This caused a lot of head scratching because the MCACOD (bits 15:0) of
that status is a signature from an L1 data cache error. But Linux says
that it found it in "Bank 0", which on this model CPU only reports L1
instruction cache errors.

The answer was that Linux doesn't initialize "m->bank" in the case that
it finds a fatal error in the mce_no_way_out() pre-scan of banks. If
this was a local machine check, then this partially initialized struct
mce is being passed to mce_panic().

Fix is simple: just initialize m->bank in the case of a fatal error.

Fixes: 40c36e27 ("x86/mce: Fix incorrect "Machine check from unknown source" message")
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: x86-ml <x86@kernel.org>
Cc: stable@vger.kernel.org # v4.18 Note pre-v5.0 arch/x86/kernel/cpu/mce/core.c was called arch/x86/kernel/cpu/mcheck/mce.c
Link: https://lkml.kernel.org/r/20190201003341.10638-1-tony.luck@intel.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5b27e3bc
    • J
      cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM · 97a7fa90
      由 Josh Poimboeuf 提交于 
      commit b284909abad48b07d3071a9fc9b5692b3e64914b upstream.

With the following commit:

  73d5e2b4 ("cpu/hotplug: detect SMT disabled by BIOS")

... the hotplug code attempted to detect when SMT was disabled by BIOS,
in which case it reported SMT as permanently disabled.  However, that
code broke a virt hotplug scenario, where the guest is booted with only
primary CPU threads, and a sibling is brought online later.

The problem is that there doesn't seem to be a way to reliably
distinguish between the HW "SMT disabled by BIOS" case and the virt
"sibling not yet brought online" case.  So the above-mentioned commit
was a bit misguided, as it permanently disabled SMT for both cases,
preventing future virt sibling hotplugs.

Going back and reviewing the original problems which were attempted to
be solved by that commit, when SMT was disabled in BIOS:

  1) /sys/devices/system/cpu/smt/control showed "on" instead of
     "notsupported"; and

  2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning.

I'd propose that we instead consider #1 above to not actually be a
problem.  Because, at least in the virt case, it's possible that SMT
wasn't disabled by BIOS and a sibling thread could be brought online
later.  So it makes sense to just always default the smt control to "on"
to allow for that possibility (assuming cpuid indicates that the CPU
supports SMT).

The real problem is #2, which has a simple fix: change vmx_vm_init() to
query the actual current SMT state -- i.e., whether any siblings are
currently online -- instead of looking at the SMT "control" sysfs value.

So fix it by:

  a) reverting the original "fix" and its followup fix:

     73d5e2b4 ("cpu/hotplug: detect SMT disabled by BIOS")
     bc2d8d26 ("cpu/hotplug: Fix SMT supported evaluation")

     and

  b) changing vmx_vm_init() to query the actual current SMT state --
     instead of the sysfs control value -- to determine whether the L1TF
     warning is needed.  This also requires the 'sched_smt_present'
     variable to exported, instead of 'cpu_smt_control'.

Fixes: 73d5e2b4 ("cpu/hotplug: detect SMT disabled by BIOS")
Reported-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Joe Mario <jmario@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      97a7fa90
  25. 31 1月, 2019 1 次提交
  27. 26 1月, 2019 2 次提交
    • H
      x86/topology: Use total_cpus for max logical packages calculation · a4772e8b
      由 Hui Wang 提交于 
      [ Upstream commit aa02ef099cff042c2a9109782ec2bf1bffc955d4 ]

nr_cpu_ids can be limited on the command line via nr_cpus=. This can break the
logical package management because it results in a smaller number of packages
while in kdump kernel.

Check below case:
There is a two sockets system, each socket has 8 cores, which has 16 logical
cpus while HT was turn on.

 0  1  2  3  4  5  6  7     |    16 17 18 19 20 21 22 23
 cores on socket 0               threads on socket 0
 8  9 10 11 12 13 14 15     |    24 25 26 27 28 29 30 31
 cores on socket 1               threads on socket 1

While starting the kdump kernel with command line option nr_cpus=16 panic
was triggered on one of the cpus 24-31 eg. 26, then online cpu will be
1-15, 26(cpu 0 was disabled in kdump), ncpus will be 16 and
__max_logical_packages will be 1, but actually two packages were booted on.

This issue can reproduced by set kdump option nr_cpus=<real physical core
numbers>, and then trigger panic on last socket's thread, for example:

taskset -c 26 echo c > /proc/sysrq-trigger

Use total_cpus which will not be limited by nr_cpus command line to calculate
the value of __max_logical_packages.
Signed-off-by: NHui Wang <john.wanghui@huawei.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: <guijianfeng@huawei.com>
Cc: <wencongyang2@huawei.com>
Cc: <douliyang1@huawei.com>
Cc: <qiaonuohan@huawei.com>
Link: https://lkml.kernel.org/r/20181107023643.22174-1-john.wanghui@huawei.comSigned-off-by: NSasha Levin <sashal@kernel.org>
      a4772e8b
    • B
      x86/mce: Fix -Wmissing-prototypes warnings · 1d839c72
      由 Borislav Petkov 提交于 
      [ Upstream commit 68b5e4326e4b8ac9080835005d8254fed0fb3c56 ]

Add the proper includes and make smca_get_name() static.

Fix an actual bug too which the warning triggered:

  arch/x86/kernel/cpu/mcheck/therm_throt.c:395:39: error: conflicting \
  types for ‘smp_thermal_interrupt’
   asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r)
                                         ^~~~~~~~~~~~~~~~~~~~~
  In file included from arch/x86/kernel/cpu/mcheck/therm_throt.c:29:
  ./arch/x86/include/asm/traps.h:107:17: note: previous declaration of \
	  ‘smp_thermal_interrupt’ was here
   asmlinkage void smp_thermal_interrupt(void);
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Yi Wang <wang.yi59@zte.com.cn>
Cc: Michael Matz <matz@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1811081633160.1549@nanos.tec.linutronix.deSigned-off-by: NSasha Levin <sashal@kernel.org>
      1d839c72
  29. 17 1月, 2019 1 次提交
    • W
      x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE · 4bef2bac
      由 WANG Chao 提交于 
      commit e4f358916d528d479c3c12bd2fd03f2d5a576380 upstream.

Commit

  4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")

replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the
remaining pieces.

 [ bp: Massage commit message. ]

Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")
Signed-off-by: NWANG Chao <chao.wang@ucloud.cn>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linux-kbuild@vger.kernel.org
Cc: srinivas.eeda@oracle.com
Cc: stable <stable@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cnSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4bef2bac
  31. 10 1月, 2019 1 次提交