Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 08 8月, 2013 2 次提交
    • M
      perf tools: Add support for pinned modifier · e9a7c414
      由 Michael Ellerman 提交于 
      This commit adds support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.

The "p" modifier is already taken for precise, and "P" may be used in
future to mean "fully precise".

So we use "D", which stands for pinneD - and looks like a padlock, or if
you're using the ":D" syntax perf smiles at you.

This is an oft-requested feature from our HW folks, who want to be able
to run a large number of events, but also want 100% accurate results for
instructions per cycle.

Comparison of results with and without pinning:

$ perf stat -e '{cycles,instructions}:D' -e cycles,instructions,...

  79,590,480,683 cycles         #  0.000 GHz
 166,123,716,524 instructions   #  2.09  insns per cycle
                                #  0.11  stalled cycles per insn

  79,352,134,463 cycles         #  0.000 GHz                     [11.11%]
 165,178,301,818 instructions   #  2.08  insns per cycle
                                #  0.11  stalled cycles per insn [11.13%]

As you can see although perf does a very good job of scaling the values
in the non-pinned case, there is some small discrepancy.

The patch is fairly straight forward, the one detail is that we need to
make sure we only request pinning for the group leader when we have a
group.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NJiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1375795686-4226-1-git-send-email-michael@ellerman.id.au
[ Use perf_evsel__is_group_leader instead of open coded equivalent, as
  suggested by Jiri Olsa ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e9a7c414
    • J
      perf tools: Add 'S' event/group modifier to read sample value · 3c176311
      由 Jiri Olsa 提交于 
      Adding 'S' event/group modifier to specify that the event value/s are
read by PERF_SAMPLE_READ sample type processing, instead of the period
value offered by lower layers.

There's additional behaviour change for 'S' modifier being specified on
event group:

Currently all the events within a group makes samples. If user now
specifies 'S' within group modifier, only the leader will trigger
samples. The rest of events in the group will have sampling disabled.

And same as for single events, values of all events within the group
(including leader) are read by PERF_SAMPLE_READ sample type processing.

Following example will create event group with cycles and cache-misses
events, setting the cycles as group leader and the only event to
actually sample. Both cycles and cache-misses event period values are
read by PERF_SAMPLE_READ sample type processing with PERF_FORMAT_GROUP
read format.

Example:

  $ perf record -e '{cycles,cache-misses}:S' ls
  ...
  $ perf report --group --show-total-period --stdio
  ...
  # Samples: 36  of event 'anon group { cycles, cache-misses }'
  # Event count (approx.): 12585593
  #
  #       Overhead          Period  Command      Shared Object                      Symbol
  # ..............  ..............  .......  .................  ..........................
  #
    19.92%   1.20%  2505936     31       ls  [kernel.kallsyms]  [k] mark_held_locks
    13.74%   0.47%  1729327     12       ls  [kernel.kallsyms]  [k] sched_clock_local
    13.64%  23.72%  1716147    612       ls  ld-2.14.90.so      [.] check_match.10805
    13.12%  23.22%  1650778    599       ls  libc-2.14.90.so    [.] _nl_intern_locale_data
    11.24%  29.19%  1414554    753       ls  [kernel.kallsyms]  [k] sched_clock_cpu
     8.50%   0.35%  1070150      9       ls  [kernel.kallsyms]  [k] check_chain_key
  ...
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-iyoinu3axi11mymwnh2b7fxj@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3c176311
  3. 13 7月, 2013 1 次提交
  5. 08 8月, 2012 2 次提交
  7. 07 1月, 2012 1 次提交
  9. 18 2月, 2011 1 次提交
    • A
      perf list: Allow filtering list of events · 668b8788
      由 Arnaldo Carvalho de Melo 提交于 
      The man page has the details, here are some examples:

[root@emilia ~]# perf list *fault*  *:*wait*

List of pre-defined events (to be used in -e):
  page-faults OR faults                      [Software event]
  minor-faults                               [Software event]
  major-faults                               [Software event]
  alignment-faults                           [Software event]
  emulation-faults                           [Software event]

  radeon:radeon_fence_wait_begin             [Tracepoint event]
  radeon:radeon_fence_wait_end               [Tracepoint event]
  writeback:wbc_writeback_wait               [Tracepoint event]
  writeback:wbc_balance_dirty_wait           [Tracepoint event]
  writeback:writeback_congestion_wait        [Tracepoint event]
  writeback:writeback_wait_iff_congested     [Tracepoint event]
  sched:sched_wait_task                      [Tracepoint event]
  sched:sched_process_wait                   [Tracepoint event]
  sched:sched_stat_wait                      [Tracepoint event]
  sched:sched_stat_iowait                    [Tracepoint event]
  syscalls:sys_enter_epoll_wait              [Tracepoint event]
  syscalls:sys_exit_epoll_wait               [Tracepoint event]
  syscalls:sys_enter_epoll_pwait             [Tracepoint event]
  syscalls:sys_exit_epoll_pwait              [Tracepoint event]
  syscalls:sys_enter_rt_sigtimedwait         [Tracepoint event]
  syscalls:sys_exit_rt_sigtimedwait          [Tracepoint event]
  syscalls:sys_enter_waitid                  [Tracepoint event]
  syscalls:sys_exit_waitid                   [Tracepoint event]
  syscalls:sys_enter_wait4                   [Tracepoint event]
  syscalls:sys_exit_wait4                    [Tracepoint event]
  syscalls:sys_enter_waitpid                 [Tracepoint event]
  syscalls:sys_exit_waitpid                  [Tracepoint event]
[root@emilia ~]#
Suggested-by: NIngo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      668b8788
  11. 24 10月, 2010 1 次提交
  13. 08 5月, 2010 1 次提交
    • A
      perf list: Improve the raw hw event descriptor documentation · 1cf4a063
      由 Arnaldo Carvalho de Melo 提交于 
      It was x86 specific and imcomplete at that, improve the situation by
making it clear where the example provided applies and by adding the
URLs for the Intel and AMD manuals where this is discussed in depth.
Acked-by: NRobert Richter <robert.richter@amd.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Reported-by: Robert Richter <robert.richter@amd.com
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1cf4a063
  15. 05 5月, 2010 1 次提交
  17. 07 6月, 2009 1 次提交
  19. 06 6月, 2009 2 次提交