- 30 1月, 2014 7 次提交
-
-
由 Alex Deucher 提交于
DCE5 and newer hardware only has 1 DAC. Use the correct offset. This may fix display problems on certain board configurations. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
If we are not able to properly initialize one of the gpu engines for buffer paging, we limit vram to the size of the cpu visible aperture. We generally either use the gfx or dma engine to do this. Clean up the size limiting code to only adjust the size based on what ring is selected for buffer paging rather than making assumptions about which engine is selected for paging. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
The hw is buggy and it's not currently used, but it's currently still initialized by the driver. Skip the init. Skipping init also seems to improve stability with dpm on some r6xx asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=66963Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com>
-
由 Alex Deucher 提交于
Prevent runtime suspend of non-PX GPUs. Runtime suspend is not what we want in those cases. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Otherwise we allocate a new VMID on nearly every submit. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 1月, 2014 6 次提交
-
-
git://anongit.freedesktop.org/tegra/linux由 Dave Airlie 提交于
drm/tegra: Changes for v3.14-rc1 (update) These patches fix some issues caused by the DRM panel support from the previous pull request and add two more panels (for the Toshiba AC100 as well as the Seaboard and Ventana). * tag 'drm/for-3.14-rc1-20140123' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Obtain head number from DT drm/panel: update EDID BLOB in panel_simple_get_modes() gpu: host1x: Remove unnecessary include drm/tegra: Use proper data type drm/tegra: Clarify how panel modes override others drm/tegra: Fix possible CRTC mask for RGB outputs drm/i915: Use drm_encoder_crtc_ok() drm: Move drm_encoder_crtc_ok() to core drm: provide a helper for the encoder possible_crtcs mask drm/tegra: Don't check resource with devm_ioremap_resource() drm/panel: Add support for Chunghwa CLAA101WA01A panel drm/panel: Add support for Samsung LTN101NT05 panel
-
由 Dave Airlie 提交于
these 3 were checking in_interrupt but we have situations where calling vunmap under this could cause a BUG to be hit in smp_call_function_many. Use the drm_can_sleep macro instead, which should stop this path from been taken in this case. Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Pile of -fixes all over the place. Lot's of cc: stable. Only big thing is that we've dropped the preliminary hw support tag for bdw - it seems to work. Which also means that I'll shovel a few more bdw patches through -fixes, there's 5 w/a patches from Ken already on intel-gfx. * tag 'drm-intel-fixes-2014-01-28' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix the offset issue for the stolen GEM objects drm/i915: Decouple GPU error reporting from ring initialisation i915: remove pm_qos request on error Revert "drm/i915: Mask reserved bits in display/sprite address registers" drm/i915: VLV2 - Fix hotplug detect bits drm/i915: Allow reading the TIMESTAMP register on Gen8. drm/i915: Repeat evictions whilst pageflip completions are outstanding drm/i915: Wait for completion of pending flips when starved of fences drm/i915: don't disable DP port after a failed link training drm/i915: don't disable the DP port if the link is lost drm/i915: Eliminate lots of WARNs when there's no backlight present drm/i915: g4x/vlv: fix dp aux interrupt mask drm/i915/ppgtt: Defer request freeing on reset i915: send D1 opregion notification drm/i915/bdw: remove preliminary_hw_support flag from BDW drm/i915: Tune down reset_stat output from ERROR to debug drm/i915: Make semaphore modparam RO drm/i915: Fix disabled semaphores drm/i915: Clarify relocation errnos drm/i915: Spelling s/auxilliary/auxiliary/
-
git://ftp.arm.linux.org.uk/~rmk/linux-cubox由 Dave Airlie 提交于
Just one-liner which corrects a select statement for DRM_KMS_FB_HELPER which looks like it was missed in the initial merge. Based on 3.13. * 'drm-armada-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: (55 commits) DRM: armada: fix missing DRM_KMS_FB_HELPER select
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux由 Dave Airlie 提交于
omapdrm patches for 3.14 * tag 'omapdrm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: drm/omap: Enable DT support for DMM drm/omap: fix: change dev_unload order drm/omap: fix: disable encoder before destroying it drm/omap: fix: disconnect devices when omapdrm module is removed drm/omap: fix: Defer probe if an omapdss device requests for it at connect drm/omap: fix (un)registering irqs inside an irq handler Conflicts: drivers/gpu/drm/omapdrm/omap_drv.c
-
git://github.com/patjak/drm-gma500由 Dave Airlie 提交于
Only two patches this time around. One trivial and one locking fix. * 'gma500-next' of git://github.com/patjak/drm-gma500: drm/gma500: Lock struct_mutex around cursor updates drivers: gpu: Mark function as static in cdv_intel_dp.c
-
- 28 1月, 2014 4 次提交
-
-
由 Patrik Jakobsson 提交于
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64361 Cc: <stable@vger.kernel.org> Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
-
由 Akash Goel 提交于
The 'offset' field of the 'scatterlist' structure was wrongly programmed with the offset value from the base of stolen area, whereas this field indicates the offset from where the interested data starts within the first PAGE pointed to by 'scattterlist' structure. As a result when a new GEM object allocated from stolen area is mapped to GTT, it could lead to an overwrite of GTT entries as the page count calculation will go wrong, refer the function 'sg_page_count'. v2: Modified the commit message. (Chris) Signed-off-by: NAkash Goel <akash.goel@intel.com> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71908 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69104Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Russell King 提交于
Commit 92b6f89f6b8f (drm: Add separate Kconfig option for fbdev helpers) happened in parallel with the inclusion of Armada DRM into mainline, and so missed this update. Add the necessary select statement to avoid build errors. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Chris Wilson 提交于
Currently we report through our error state only the rings that have been initialised (as detected by ring->obj). This check is done after the GPU reset and ring re-initialisation, which means that the software state may not be the same as when we captured the hardware error and we may not print out any of the vital information for debugging the hang. This (and the implied object leak) is a regression from commit 3d57e5bd Author: Ben Widawsky <ben@bwidawsk.net> Date: Mon Oct 14 10:01:36 2013 -0700 drm/i915: Do a fuller init after reset Note that we are already starting to get bug reports with incomplete error states from 3.13, which also hampers debugging userspace driver issues. v2: Prevent a NULL dereference on 830gm/845g after a GPU reset where the scratch obj may be NULL. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=74094 Cc: stable@vger.kernel.org # please don't delay since it's a vital support/debug feature for the intel gfx stack in general Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> [danvet: Add a bit of fluff to make it clear we need this expedited in stable.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 25 1月, 2014 2 次提交
-
-
由 Stanislaw Gruszka 提交于
Not removing pm qos request and free memory for it can cause crash, when some other driver use pm qos. For example, this oops: BUG: unable to handle kernel paging request at fffffffffffffff8 IP: [<ffffffff81307a6b>] plist_add+0x5b/0xd0 Call Trace: [<ffffffff810acf25>] pm_qos_update_target+0x125/0x1e0 [<ffffffff810ad071>] pm_qos_add_request+0x91/0x100 [<ffffffffa053ec14>] e1000_open+0xe4/0x5b0 [e1000e] was caused by earlier i915 probe failure: [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000 [drm:i915_driver_load] *ERROR* failed to init modeset i915: probe of 0000:00:02.0 failed with error -5 Bug report: http://bugzilla.redhat.com/show_bug.cgi?id=1057533Reported-by: NGiandomenico De Tullio <ghisha@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> [danvet: Drop unnecessary code movement.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Daniel Vetter 提交于
This reverts commit 446f2545. I've left the masking in the pageflip code since that seems to be some useful piece of preemptive robustness. Iirc I've merged this patch under the assumption that the BIOS leaves some random gunk in the lower bits and gets unhappy if we trample on them. We have quite a few case like this, so this made sense. Now I've just learned that there's actual hardware features bits in the low 12 bits, and the kernel needs to preserve them to allow a userspace blob to do its job. Given Dave Airlie's clear stance on userspace blob drivers I've quickly chatted with him and he doesn't seem too happy. So let's revert this. If there are indeed bits that we must preserve in this range then we can ressurrect this patch, but with proper documentation for those bits supplied. And we probably also need to think a bit about interactions with our driver. Cc: Armin Reese <armin.c.reese@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dave Airlie <airlied@linux.ie> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 23 1月, 2014 21 次提交
-
-
由 Thierry Reding 提交于
The head number of a given display controller is fixed in hardware and required to program outputs appropriately. Relying on the driver probe order to determine this number will not work, since that could yield a situation where the second head was probed first and would be assigned head number 0 instead of 1. By explicitly specifying the head number in the device tree, it is no longer necessary to rely on these assumptions. As a fallback, if the property isn't available, derive the head number from the display controller node's position in the device tree. That's somewhat more reliable than the previous default but not a proper solution. Tested-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NThierry Reding <treding@nvidia.com>
-
由 Todd Previte 提交于
Add new definitions for hotplug live status bits for VLV2 since they're in reverse order from the gen4x ones. Changelog: - Restored gen4 bit definitions - Added new definitions for VLV2 - Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct bit defintions - Replaced a lost trailing brace for the added switch() Signed-off-by: NTodd Previte <tprevite@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951 [danvet: Switch to _VLV postfix instead of prefix and regroupg comments again so that the g4x warning is right next to those defines. Also add a _G4X suffix for those special ones. Also cc stable.] Cc: stable@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Dave Airlie 提交于
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Summary: - GK110/GK208 acceleration - loads more work towards pm, though, still behind a disable wall for now - error reporting improvements from both Ilia and myself - more old-school overlay improvements from Ilia - misc other bits and pieces * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits) drm/nouveau: call drm_vblank_cleanup() earlier drm/nouveau: create base display from common code drm/nv50/gr: print mpc trap name when it's not an mp trap drm/nv50/gr: update list of mp errors, make it a bitfield drm/nv50/gr: add more trap names to print on error drm/nouveau/devinit: lock/unlock crtc regs for all devices, not just pre-nv50 drm/nouveau: hold mutex while syncing to kernel channel drm/nv50-/devinit: prevent use of engines marked as disabled by hw/vbios drm/nouveau/device: provide a way for devinit to mark engines as disabled drm/nouveau/devinit: tidy up the subdev class definition drm/nouveau/bar: tidy up the subdev and object class definitions drm/nouveau/instmem: tidy up the object class definition drm/nouveau/instmem: tidy up the subdev class definition drm/nouveau/pwr: implement a simple i2c stack drm/nouveau/pwr: have rd/wr32 routines clobber data instead of addr drm/nve0/fb: turn off some bits in 10f584 at init drm/nve0/fb/gddr5: merge a fix from ddr3 for one of the timing settings drm/nve0/fb/gddr5: yet another random 10f200 bit drm/nvc0-/fb: hook up skeleton interrupt handler drm/nve0/fb/gddr5: more 10f200 stuff ...
-
由 Ben Skeggs 提交于
Fixes a NULL-ptr deref seen on module unload sometimes. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ilia Mirkin 提交于
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
-
由 Ilia Mirkin 提交于
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
-
由 Ilia Mirkin 提交于
Also avoids printing the errors bitfield if that information has already been shown. Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
-
由 Ilia Mirkin 提交于
Also make nv_lockvgac work for nv50+ devices. This should fix IO_CONDITION and related VBIOS opcodes that read/write the crtc regs. See https://bugs.freedesktop.org/show_bug.cgi?id=60680Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Maarten Lankhorst 提交于
Not holding the mutex potentially causes corruption of the kernel channel when page flipping. Cc: stable@vger.kernel.org #3.13 Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ilia Mirkin 提交于
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ilia Mirkin 提交于
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Reviewed-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Titan. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-