As suggested by the CodingStyle.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove all the unused #define's and add namespace to the ones that
are used.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the pcmuio_{read,write}() helpers to read/write all 24 channels
instead of handling the digital I/O as three separate ports. This
simplifies both functions with minimal overhead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to handle reading a 24-bit value from the
three 8-bit registers associated with a "port" or "page".

Simplify the for() loop in pcmuio_handle_asic_interrupt() that finds
which channels have triggered the interrupt.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Only subdevices 0 and 2 support interrupts. Simplify the attach
a bit.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'asic' and 'port' associated with a given subdevice can easily be
found based on the subdevice 'index'. With that information we can
then calculate the correct iobase and register offset needed to read/
write the 8-bit ports.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It's simple enough to calculate the iobase when needed. Remove this
member from the private data.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The number of subdevices needed by the driver is based on the
'num_asics' reported by the boardinfo and each subdevice always
has 24 channels. Simplify the attach a bit.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These members of the boardinfo are not used by the driver. Remove
them.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'subpriv' pointer is kzalloc'ed during the attach.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the subdevice private data is always initialize to
'0' due to the 'thisasic_chanct' always being zero when it is set
during the attach. Simplify the driver a bit by removing it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the subdevice private data is always initialize to
s->n_chan if the subdevice supports interrupts and is only used
in functions that can be called by the interrupt subdevice.

Simplyfy the driver a bit  by removing it and just using s->n_chan.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the subdevice private data is always initialize to
'0' due to the 'byte_no' always being zero when it is set during
the attach. Simplify the driver a bit by removing it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These members of the private data are either not referenced or are set
but never used by the driver. Remove them.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to handle writing a 24-bit value to the
three 8-bit registers associated with a "port" or "page".
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

All the I/O ports are left unlocked in the driver so the 'pagelock'
in the private data is not necessary. The paranoia sanity checks
are also unnecessary, Remove them.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add namespace to the register map defines. Gather them together
and tidy them up a bit.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These functions are #ifdef'ed out and not needed in the driver.
Just remove them.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by Ian Abbott, comedi_set_spriv() can only be used to
set the subdevice->private pointer to something that can be kfree()'d.
Rename the function to comedi_alloc_spriv() and have it kzalloc() the
memory as well as set the private pointer. This saves a function call
in the drivers and avoids the possibility of incorrectly calling
comedi_set_spriv() for some pointer that is not meant to be kfree()'d.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the addi-data drivers that still use the "common" code have
ttl digital i/o. Remove the unnecessary boardinfo as well as the
subdevice initialization code.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the addi-data drivers that still use the "common" code support
dma. Remove the unnecessaary boardinfo and private data flags.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to the on-going cleanup of the addi-data drivers, the boardinfo
used in the "common" code has a number of variables that are not
used. Remove the cruft.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to the on-going cleanup of the addi-data drivers, there are a
number of unused defines in addi_common.h. Remove the cruft.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

All of the remaining addi-data drivers that use the "common" code
either do not have an eeprom or the PCI controller chip is not a
PLX PCI 9054. Knowing this we can simplify the common code that
reads the PCI bars to get the iobase addresses.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to the on-going cleanup of the addi-data drivers, the private
data used in the "common" code has a number of variables that
either are not used at all or or set but never used.

Remove all of them from the private data and the unnecessary use
in the drivers.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the comments in r819xU_phy.c by:
- replacing "// ..." with "/* .... */"
- removing unnecessary comments, the dates and names of
  developers from comments
- fixing some inconsistent comments
- fixing some typos
- fixing alignment issues
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the whitespace around ',' to meet the
linux kernel coding style.
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes variable 'Ret' from rtl8192_QueryBBReg()
since its value is returned immediately after it is
assigned. The name 'Ret', anyway, does not give any
insight and the function description comment is sufficiently
informative regarding the returned value.
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix missing free_netdev() before return from function xlr_net_probe()
in the devm_ioremap_resource() error handling case.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove more assignments from if-statement conditions in bpctl_mod.c,
resolving checkpatch.pl errors. Those that remain need more attention
than I'm presently prepared to give them.
Signed-off-by: NChad Williamson <chad@dahc.us>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove a bunch of assignments from if-statement conditions in
bpctl_mod.c, resolving checkpatch.pl errors. (This isn't all of
them, but the patch is getting rather long...)
Signed-off-by: NChad Williamson <chad@dahc.us>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary braces in bpctl_mod.c, resolving checkpatch.pl
warnings.
Signed-off-by: NChad Williamson <chad@dahc.us>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames the following variables:
- dwRegAddr and RegAddr into reg_addr
- dwData and Data       into data
- BitShift              into bitshift
- Offset                into offset
- NewOffset             into new_offset
- Bandwidth             into bandwidth

The renaming was done to remove camel case and
unnecessary 'dw' prefix from the above variable names.
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames BitMask and dwBitMask variables into
bitmask to remove camel case.
dwBitMask in the given context can be renamed into simply
bitmask since its number of bits (dw->32) can be deduced
by its type which is u32.
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames the variables OriginalValue, NewValue,
Original_Value, New_Value and retValue to reg, and
the variables bRegValue and dwRegValue to reg_u8 and
reg_u32, respectively. This is done primarily in
order to reduce the variable name length and consequently
line length.

Also, it replaces the pair of Original and New variables
with one variable.
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the whitespace around relational operators
to meet the linux kernel coding style.
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the whitespace around ';' to meet the
linux kernel coding style.
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the whitespace around the assignment
operator to meet linux kernel coding style.
Signed-off-by: NXenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since 18 bit is supported as datawidth in device tree it should be
supported in driver. Beside the LDB channel the IPU channel has also
to be configured to use BGR666.
Signed-off-by: NMarkus Niebel <Markus.Niebel@tqs.de>
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds support for the LVDS Display Bridge contained
in i.MX5 and i.MX6 SoCs.

Bit mapping, data width, and video timings are configurable
via device tree. Dual-channel mode is supported for a single
high-resolution source.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>