Fix following sparc (32 bit) build error:

  CC      arch/sparc/kernel/asm-offsets.s
In file included from include/linux/seqlock.h:29:0,
                 from include/linux/time.h:8,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:57,
                 from arch/sparc/kernel/asm-offsets.c:13:
include/linux/spinlock.h: In function 'spin_unlock_wait':
include/linux/spinlock.h:360:2: error: implicit declaration of function 'cpu_relax'

Most likely caused by commit e66eed65 ("list: remove
prefetching from regular list iterators") due to include
changes.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adapt new API. Almost change is trivial, most important change are to
remove following like =operator.

 cpumask_t cpu_mask = *mm_cpumask(mm);
 cpus_allowed = current->cpus_allowed;

Because cpumask_var_t is =operator unsafe. These usage might prevent
kernel core improvement.

No functional change.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements SMP IPIs on LEON using software generated
IRQs to signal between CPUs.

The IPI IRQ number is set by using the ipi_num property in the
device tree, or defaults to 13. LEON SMP systems should reserve
IRQ 13 (and IRQ 15) to Linux in order for the defaults to work.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current sparc32 SMP IPI generation is implemented the
cross call function. The cross call function uses IRQ15 the
NMI, this is has the effect that IPIs will interrupt IRQ
critical areas and hang the system. Typically on/after
spin_lock_irqsave calls can be aborted.

The cross call functionality must still exist to flush
cache/TLBS.

This patch provides CPU models a custom way to implement
generation of IPIs on the generic code's request. The
typical approach is to generate an IRQ for each IPI case.

After this patch each sparc32 SMP CPU model needs to
implement IPIs in order to function properly.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds {read,write}*_be big endian memory access
routines to the io.h header used on SPARC32 and SPARC64.

Tested on SPARC32 (LEON)
Signed-off-by: NJan Andersson <jan@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a multiple message send syscall and is the send
version of the existing recvmmsg syscall. This is heavily
based on the patch by Arnaldo that added recvmmsg.

I wrote a microbenchmark to test the performance gains of using
this new syscall:

http://ozlabs.org/~anton/junkcode/sendmmsg_test.c

The test was run on a ppc64 box with a 10 Gbit network card. The
benchmark can send both UDP and RAW ethernet packets.

64B UDP

batch   pkts/sec
1       804570
2       872800 (+ 8 %)
4       916556 (+14 %)
8       939712 (+17 %)
16      952688 (+18 %)
32      956448 (+19 %)
64      964800 (+20 %)

64B raw socket

batch   pkts/sec
1       1201449
2       1350028 (+12 %)
4       1461416 (+22 %)
8       1513080 (+26 %)
16      1541216 (+28 %)
32      1553440 (+29 %)
64      1557888 (+30 %)

We see a 20% improvement in throughput on UDP send and 30%
on raw socket send.

[ Add sparc syscall entries. -DaveM ]
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Define boot_cpu_id in single-processor kernels as well. This is
to support architectures which can boot on other than CPU0.

Sam Ravnborg has written the cleanup parts by extracting
boot_cpu_id from smp_32.c into setup_32.c and cleaned up
sun4d_irq.c.

boot_cpu_id was initialized before BSS was cleared in
sun4c_continue_boot, instead boot_cpu_id is set to 0xff to
avoid BSS. If boot_cpu_id is untouched (0xff) by bootup code
it will be overwritten to 0. boot_cpu_id4 is automatically
calculated in common code.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following warning:

mm/percpu.c: In function 'pcpu_embed_first_chunk':
mm/percpu.c:1647:3: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'unsigned int'
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
[sam: added warning message to changelog, use _AC()]
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We did a cpu_probe() call each time a CPU got online - which
only effect was to save latest CPU/FPU info for use by show_cpuinfo().
Use same setup as for sparc64 where we probe for this info during startup,
and only once.

This allowed us to annotate a few functions __init which again
fixed the following section mismatch warnings:

WARNING: vmlinux.o(.text+0x65f0): Section mismatch in reference from the function set_cpu_and_fpu() to the (unknown reference) .init.rodata:(unknown)
WARNING: vmlinux.o(.text+0x65f8): Section mismatch in reference from the function set_cpu_and_fpu() to the (unknown reference) .init.rodata:(unknown)
WARNING: vmlinux.o(.text+0x664c): Section mismatch in reference from the function set_cpu_and_fpu() to the variable .init.rodata:manufacturer_info
WARNING: vmlinux.o(.text+0x6650): Section mismatch in reference from the function set_cpu_and_fpu() to the variable .init.rodata:manufacturer_info
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have all the cpu related info in cpu.c - so move
the remaining functions to support /proc/cpuinfo to this file.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The extended IRQ controller gives the LEON 16 more IRQs.

The patch installs a custom handler for the exetended controller
IRQ, where a register is read and the "real" IRQ causing IRQ is
determined.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The conversion of sparc32 to genirq is based on original work done
by David S. Miller.
Daniel Hellstrom has helped in the conversion and implemented
the shutdowm functionality.
Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20

Test status:
sun4c      - not tested
sun4m,pci  - not tested
sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20)
sun4d      - not tested
leon       - tested on various combinations of leon boards,
             including SMP variants

generic
   Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW
   Allocate 64 IRQs - which is enough even for SS2000
   Use a table of irq_bucket to maintain uses IRQs
      irq_bucket is also used to chain several irq's that
      must be called when the same intrrupt is asserted
   Use irq_link to link a interrupt source to the irq
   All plafforms must now supply their own build_device_irq method
   handler_irq rewriten to use generic irq support

floppy
   Read FLOPPY_IRQ from platform device
   Use generic request_irq to register the floppy interrupt
   Rewrote sparc_floppy_irq to use the generic irq support

pcic:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for pcic
   Use pcic_build_device_irq in pci_time_init
   allocate virtual irqs in pcic_fill_irq

sun4c:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for sun4c
   Use sun4c_build_device_irq in sun4c_init_timers

sun4m:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4m_handler_data that allow easy access to necessary
     data in the mask/unmask functions
   Add a helper method to enable profile_timer (used from smp)
   Added sun4m_build_device_irq
   Use sun4m_build_device_irq in sun4m_init_timers

   TODO:
      There is no replacement for smp_rotate that always scheduled
      next CPU as interrupt target upon an interrupt

sun4d:
   Introduce irq_chip
   Introduce dedicated mask/unmask methods
   Introduce sun4d_handler_data that allow easy access to
   necessary data in mask/unmask fuctions
   Rewrote sun4d_handler_irq to use generic irq support

   TODO:
      The original implmentation of enable/disable had:

          if (irq < NR_IRQS)
               return;

      The new implmentation does not distingush between SBUS and cpu
      interrupts.
      I am no sure what is right here. I assume we need to do
      something for the cpu interrupts.

      I have not succeeded booting my sun4d box (with or without this patch)
      and my understanding of this platfrom is limited.
      So I would be a bit suprised if this works.

leon:
   Introduce irq_chip
   Store mask in chip_data for use in mask/unmask functions
   Add build_device_irq for leon
   Use leon_build_device_irq in leon_init_timers
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: NDaniel Hellstrom <daniel@gaisler.com>
Tested-by: NDaniel Hellstrom <daniel@gaisler.com>
Tested-by: NMarcel van Nies <morcles@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the ifdeffery to a header file to make the logic more
obvious where we decide between PCI or SBUS init
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This compile error triggers on Sparc64:

   kernel/sched.c:7140: error: 'cpu_coregroup_mask' undeclared here (not in a function)

Because after the recent scheduler domain cleanups the scheduler
uses this arch method as a function pointer in a scheduler
topology data structure - which is not possible with a macro.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20110412140040.3020ef55.sfr@canb.auug.org.auSigned-off-by: NIngo Molnar <mingo@elte.hu>

Introduce:

static __always_inline bool static_branch(struct jump_label_key *key);

instead of the old JUMP_LABEL(key, label) macro.

In this way, jump labels become really easy to use:

Define:

        struct jump_label_key jump_key;

Can be used as:

        if (static_branch(&jump_key))
                do unlikely code

enable/disale via:

        jump_label_inc(&jump_key);
        jump_label_dec(&jump_key);

that's it!

For the jump labels disabled case, the static_branch() becomes an
atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(),
atomic_dec() operations. We show testing results for this change below.

Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct.

Since we now require a 'struct jump_label_key *key', we can store a pointer into
the jump table addresses. In this way, we can enable/disable jump labels, in
basically constant time. This change allows us to completely remove the previous
hashtable scheme. Thanks to Peter Zijlstra for this re-write.

Testing:

I ran a series of 'tbench 20' runs 5 times (with reboots) for 3
configurations, where tracepoints were disabled.

jump label configured in
avg: 815.6

jump label *not* configured in (using atomic reads)
avg: 800.1

jump label *not* configured in (regular reads)
avg: 803.4
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110316212947.GA8792@redhat.com>
Signed-off-by: NJason Baron <jbaron@redhat.com>
Suggested-by: NH. Peter Anvin <hpa@linux.intel.com>
Tested-by: NDavid Daney <ddaney@caviumnetworks.com>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no user now.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Miller <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

minix bit operations are only used by minix filesystem and useless by
other modules.  Because byte order of inode and block bitmaps is different
on each architecture like below:

m68k:
	big-endian 16bit indexed bitmaps

h8300, microblaze, s390, sparc, m68knommu:
	big-endian 32 or 64bit indexed bitmaps

m32r, mips, sh, xtensa:
	big-endian 32 or 64bit indexed bitmaps for big-endian mode
	little-endian bitmaps for little-endian mode

Others:
	little-endian bitmaps

In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.

CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa).  The architectures which always use little-endian
bitmaps do not select these options.

Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself.  Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce little-endian bit operations to the big-endian architectures
which do not have native little-endian bit operations and the
little-endian architectures.  (alpha, avr32, blackfin, cris, frv, h8300,
ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa)

These architectures can just include generic implementation
(asm-generic/bitops/le.h).
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All architectures can use the common dma_addr_t typedef now. We can
remove the arch specific dma_addr_t.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a node parameter to alloc_thread_info(), and change its name to
alloc_thread_info_node()

This change is needed to allow NUMA aware kthread_create_on_cpu()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make __get_user_pages return -EHWPOISON for HWPOISON page only if
FOLL_HWPOISON is specified.  With this patch, the interested callers
can distinguish HWPOISON pages from general FAULT pages, while other
callers will still get -EFAULT for all these pages, so the user space
interface need not to be changed.

This feature is needed by KVM, where UCR MCE should be relayed to
guest for HWPOISON page, while instruction emulation and MMIO will be
tried for general FAULT page.

The idea comes from Andrew Morton.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add a few includes back required to build with floppy enabled
Fix declaration of trapbase_cpu* so it is now consistent
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for cleaning up a number of files add
declarations for irq and smp related data/functions to
the relevant headers.

This showed that the extern declaration of cputypval differed
in the two files where it was used.
As cputypval is defined like this:

cputypval:
        .asciz "sun4c"

the correct representation is a char array.
Fix users to use the new declaration.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The way a LEON is powered down is implemented differently depending
on CHIP type. The AMBA Plug&Play system ID tells revision of GRLIB
and CHIP.

This is for example needed by the GR-LEON4-ITX board and the UT699.

Previously the power down support for LEON was limited to SMP, now
both SMP and UP systems use the instruction.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The generic irq support uses the term 'irq' for the
allocated irq number.
Fix it so sparc64 use the same term for an irq as the
generic irq support does.
For a naive reader this is less confusing.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

[AV: on architectures where default conflicts with existing
flags, that is]
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic
prototypes to use u32 types for the futex as this is the data type the
futex core code uses all over the place.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Cc: Darren Hart <darren@dvhart.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110311025058.GD26122@google.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The cmpxchg_futex_value_locked API was funny in that it returned either
the original, user-exposed futex value OR an error code such as -EFAULT.
This was confusing at best, and could be a source of livelocks in places
that retry the cmpxchg_futex_value_locked after trying to fix the issue
by running fault_in_user_writeable().
    
This change makes the cmpxchg_futex_value_locked API more similar to the
get_futex_value_locked one, returning an error code and updating the
original value through a reference argument.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>  [tile]
Acked-by: Tony Luck <tony.luck@intel.com>  [ia64]
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: Michal Simek <monstr@monstr.eu>  [microblaze]
Acked-by: David Howells <dhowells@redhat.com> [frv]
Cc: Darren Hart <darren@dvhart.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110311024851.GC26122@google.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Get rid of old users of of_platform_driver in arch/sparc.  Most
of_platform_driver users can be converted to use the platform_bus
directly.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This is useful for system management software so that it can kick
off things like gettys and everything that's started from a tty,
before we reuse it from/for something else or shut it down.

Without this ioctl it would have to temporarily become the owner of
the tty, then call vhangup() and then give it up again.

Cc: Lennart Poettering <lennart@poettering.net>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Doing NMI startup as an early initcall doesn't work because we need
to have SMP started up by then.

So we'd only NMI startup one cpu, which causes perf PMU grab to
BUG because the nmi_active count isn't what it's supposed to be.

This also points out that we don't have proper CPU up/down notifiers
for the NMI code which will need to be fixed at some point.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All architecture specific rwsem headers carry the same function
prototypes. Just x86 adds asmregparm, which is an empty define on all
other architectures. S390 has a stale rwsem_downgrade_write()
prototype.

Remove the duplicates and add the prototypes to linux/rwsem.h
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Acked-by: NTony Luck <tony.luck@intel.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: NDavid Miller <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
LKML-Reference: <20110126195833.970840140@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>