The entire file of ftrace.c in the arch code needs to be marked
as notrace. It is much cleaner to do this from the Makefile with
CFLAGS_REMOVE_ftrace.o.

[ powerpc already had this in its Makefile. ]
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Due to confusion between the ftrace infrastructure and the gcc profiling
tracer "ftrace", this patch renames the config options from FTRACE to
FUNCTION_TRACER.  The other two names that are offspring from FTRACE
DYNAMIC_FTRACE and FTRACE_MCOUNT_RECORD will stay the same.

This patch was generated mostly by script, and partially by hand.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

show_interrupts() and proc helpers are basically the same for
32 and 64 bit. Move them to a shared source file.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Create /sys/firmware/sgi_uv sysfs entries for partition_id and coherence_id.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide a means for UV interrupt MMRs to be setup with the message to be sent
when an MSI is raised.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The two files are now line by line equal. (sans a printk)
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

traps_32.c and traps_64.c are now equal. Move one to traps.c,
delete the other one and change the Makefile
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The dumpstack code is logically quite independent from the
hardware traps. Split it out into its own file.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The dumpstack code is logically quite independent from the
hardware traps. Split it out into its own file.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Combine both generic and arch-specific parts of microcode into a
single module (arch-specific parts are config-dependent).

Also while we are at it, move arch-specific parts from microcode.h
into their respective arch-specific .c files.
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: "Peter Oruba" <peter.oruba@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

to be aligned with numaq, summit.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Enables xsave/xrstor by turning on cr4.osxsave on cpu's which have
the xsave support. For now, features that OS supports/enabled are
FP and SSE.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch introduces microcode patch loading for AMD
processors. It is based on previous corresponding work
for Intel processors.

It hooks into the general patch loading module. Main
difference is that a container file format is used to hold
all patch data for multiple processors as well as an
equivalent CPU table, which comes seperately, as opposed
to Intel's microcode patching solution.

Kconfig and Makefile have been changed provice config
and build option for new source file.
Signed-off-by: NPeter Oruba <peter.oruba@amd.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Refactored code by introducing a two-module solution.

There is one general module in which vendor specific modules can hook into.
However, that is exclusive, there is only one vendor specific module
allowed at a time. A CPU vendor check makes sure only the correct
module for the underlying system gets called.

Functinally in terms of patch loading itself there are no changes. This
refactoring provides a basis for future implementations of other vendors'
patch loaders.
Signed-off-by: NPeter Oruba <peter.oruba@amd.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Split off existing code into two seperate files. One file holds general
code, the other file vendor specific parts.

No functional changes, only refactoring.

Temporarily Introduced a new module name 'ucode' for result,
due to already taken name 'microcode'.
Signed-off-by: NPeter Oruba <peter.oruba@amd.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NPeter Oruba <peter.oruba@amd.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

ftrace requires certain low-level code, like spinlocks and timestamps,
to be compiled without -pg in order to avoid infinite recursion.  This
patch splits out the core paravirt spinlocks and the Xen spinlocks
into separate files which can be compiled without -pg.

Also do xen/time.c while we're about it.  As a result, we can now use
ftrace within a Xen domain.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Real-time code needs to know the number of cycles per second
on SGI UV.  The information is provided via a run time BIOS
call.  This patch provides the linux side of that interface.
This is the first of several run time BIOS calls to be defined
in uv/bios.h and bios_uv.c.

Note that BIOS_CALL() is just a stub for now.  The bios
side is being worked on.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

-tip testing found a bootup hang here:

  initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs
  calling  acpi_event_init+0x0/0x57

the bootup should have continued with:

  initcall acpi_event_init+0x0/0x57 returned 0 after 45 msecs

but it hung hard there instead.

bisection led to this commit:

| commit 5806b81a
| Merge: d14c8a68... 6712e299...
| Author: Ingo Molnar <mingo@elte.hu>
| Date:   Mon Jul 14 16:11:52 2008 +0200
|     Merge branch 'auto-ftrace-next' into tracing/for-linus

turns out that i made this mistake in the merge:

  ifdef CONFIG_FTRACE
  # Do not profile debug utilities
  CFLAGS_REMOVE_tsc_64.o = -pg
  CFLAGS_REMOVE_tsc_32.o = -pg

those two files got unified meanwhile - so the dont-profile annotation
got lost. The proper rule is:

  CFLAGS_REMOVE_tsc.o = -pg

i guess this could have been caught sooner if the CFLAGS_REMOVE* kbuild
rule aborted the build if it met a target that does not exist anymore?
Signed-off-by: NIngo Molnar <mingo@elte.hu>

the paravirt-spinlock patches caused a boot hang with this config:

 http://redhat.com/~mingo/misc/config-Wed_Jul__9_14_47_04_CEST_2008.bad

i have bisected it down to:

|  commit e17b58c2e85bc2ad2afc07fb8d898017c2b75ed1
|  Author: Jeremy Fitzhardinge <jeremy@goop.org>
|  Date:   Mon Jul 7 12:07:53 2008 -0700
|
|      xen: implement Xen-specific spinlocks

i.e. applying that patch alone causes the hang. The hang happens in the
ftrace self-test:

  initcall utsname_sysctl_init+0x0/0x19 returned 0 after 0 msecs
  calling  init_sched_switch_trace+0x0/0x4c
  Testing tracer sched_switch: PASSED
  initcall init_sched_switch_trace+0x0/0x4c returned 0 after 167 msecs
  calling  init_function_trace+0x0/0x12
  Testing tracer ftrace:
  [hard hang]

it should have continued like this:

  Testing tracer ftrace: PASSED
  initcall init_function_trace+0x0/0x12 returned 0 after 198 msecs
  calling  init_irqsoff_tracer+0x0/0x14
  Testing tracer irqsoff: PASSED
  initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 3 msecs
  calling  init_mmio_trace+0x0/0x12
  initcall init_mmio_trace+0x0/0x12 returned 0 after 0 msecs

the problem is that such lowlevel primitives as spinlocks should never
be built with -pg (which ftrace does). Marking paravirt.o as non-pg and
marking all spinlock ops as always-inline solve the hang.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

x2apic Physical mode  support. By default we will use x2apic cluster mode.
x2apic physical mode can be selected using "x2apic_phys" boot parameter.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

x2apic cluster mode support.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: akpm@linux-foundation.org
Cc: arjan@linux.intel.com
Cc: andi@firstfloor.org
Cc: ebiederm@xmission.com
Cc: jbarnes@virtuousgeek.org
Cc: steiner@sgi.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Yinghai Lu reported crashes on 64-bit x86:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 IP: [<ffffffff80253b17>] hrtick_start_fair+0x89/0x173
 [...]

And with a long session of debugging and a lot of difficulty, tracked it down
to this commit:

 --------------->
 8fbbc4b4 is first bad commit
 commit 8fbbc4b4
 Author: Alok Kataria <akataria@vmware.com>
 Date:   Tue Jul 1 11:43:34 2008 -0700

     x86: merge tsc_init and clocksource code
 <--------------

The problem is that the TSC unification missed these Makefile rules
in arch/x86/kernel/Makefile:

  # Do not profile debug and lowlevel utilities
  CFLAGS_REMOVE_tsc_64.o = -pg
  CFLAGS_REMOVE_tsc_32.o = -pg
  ...
  CFLAGS_tsc_64.o         := $(nostackp)
  ...

which rules make sure that various instrumentation and debugging
facilities are disabled for code that might end up in a VDSO - such as
the TSC code.
Reported-and-bisected-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Conflicts:
Signed-off-by: NIngo Molnar <mingo@elte.hu>

merge traps_visws.c and apic_visws.c into visws_quirks.c.

(no code changed)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

rename setup_visws.c to visws_quirks.c.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

this is the big move: flip over VISWS to generic arch support.

From this commit on CONFIG_X86_VISWS is just another (default-disabled)
option that turns on certain quirks - no other complications.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Unify the clocksource code.
Unify the tsc_init code.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the basic global variable definitions and sched_clock handling in the
common "tsc.c" file.

 - Unify notsc kernel command line handling for 32 bit and 64bit.
 - Functional changes for 64bit.
        - "tsc_disabled" is updated if "notsc" is passed at boottime.
        - Fallback to jiffies for sched_clock, incase notsc is passed on
	  commandline.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use ACPI_NUMA directly

and move srat_32.c to mm/
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

and let 64 bit use that instead of setup_64.c

[ mingo@elte.hu ]

x86: build fix

fix:

arch/x86/kernel/setup.c: In function ‘setup_arch':
arch/x86/kernel/setup.c:561: error: implicit declaration of function ‘efi_reserve_early'

and:

arch/x86/kernel/setup.c:766: error: implicit declaration of function 'init_cpu_to_node'

and:

arch/x86/kernel/setup.c:676: warning: operation on 'max_pfn_mapped' may be undefined
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

some functions need to be moved to setup_numa.c
after we merge setup32/64.c, some funcs need to be moved back to setup.c
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

it is only needed for 32bit
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

TLB shootdown for SGI UV.

Depends on patch (in tip/x86/irq):
   x86-update-macros-used-by-uv-platform.patch   Jack Steiner May 29

This patch provides the ability to flush TLB's in cpu's that are not on
the local node.  The hardware mechanism for distributing the flush
messages is the UV's "broadcast assist unit".

The hook to intercept TLB shootdown requests is a 2-line change to
native_flush_tlb_others() (arch/x86/kernel/tlb_64.c).

This code has been tested on a hardware simulator. The real hardware
is not yet available.

The shootdown statistics are provided through /proc/sgi_uv/ptc_statistics.
The use of /sys was considered, but would have required the use of
many /sys files.  The debugfs was also considered, but these statistics
should be available on an ongoing basis, not just for debugging.

Issues to be fixed later:
- The IRQ for the messaging interrupt is currently hardcoded as 200
  (see UV_BAU_MESSAGE).  It should be dynamically assigned in the future.
- The use of appropriate udelay()'s is untested, as they are a problem
  in the simulator.
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

... and kill e820_32/64.c and e820_32/64.h
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the new amd_iommu.c file to the architecture kernel Makefile
for x86.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Cc: iommu@lists.linux-foundation.org
Cc: bhavna.sarathy@amd.com
Cc: Sebastian.Biemueller@amd.com
Cc: robert.richter@amd.com
Cc: joro@8bytes.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the source file amd_iommu_init.c to the kernel Makefile for the
x86 architecture.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Cc: iommu@lists.linux-foundation.org
Cc: bhavna.sarathy@amd.com
Cc: Sebastian.Biemueller@amd.com
Cc: robert.richter@amd.com
Cc: joro@8bytes.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds structs for the paravirt clocksource ABI
used by both xen and kvm (pvclock-abi.h).

It also adds some helper functions to read system time and
wall clock time from a paravirtual clocksource (pvclock.[ch]).
They are based on the xen code.  They are enabled using
CONFIG_PARAVIRT_CLOCK.

Subsequent patches of this series will put the code in use.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch extracts the common part of head32.c and head64.c into head.c.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Cc: andi@firstfloor.org
Cc: mingo@redhat.com
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>