Synchronize changes to host virtual addresses which are part of
a KVM memory slot to the KVM shadow mmu.  This allows pte operations
like swapping, page migration, and madvise() to transparently work
with KVM.
Signed-off-by: NAndrea Arcangeli <andrea@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

If NPT is enabled after loading both KVM modules on AMD and it should be
disabled, both KVM modules must be reloaded. If only the architecture module is
reloaded the behavior is undefined. With this patch it is possible to disable
NPT only by reloading the kvm_amd module.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

long overdue...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Implement get_user_pages_fast without locking in the fastpath on x86.

Do an optimistic lockless pagetable walk, without taking mmap_sem or any
page table locks or even mmap_sem.  Page table existence is guaranteed by
turning interrupts off (combined with the fact that we're always looking
up the current mm, means we can do the lockless page table walk within the
constraints of the TLB shootdown design).  Basically we can do this
lockless pagetable walk in a similar manner to the way the CPU's pagetable
walker does not have to take any locks to find present ptes.

This patch (combined with the subsequent ones to convert direct IO to use
it) was found to give about 10% performance improvement on a 2 socket 8
core Intel Xeon system running an OLTP workload on DB2 v9.5

 "To test the effects of the patch, an OLTP workload was run on an IBM
  x3850 M2 server with 2 processors (quad-core Intel Xeon processors at
  2.93 GHz) using IBM DB2 v9.5 running Linux 2.6.24rc7 kernel.  Comparing
  runs with and without the patch resulted in an overall performance
  benefit of ~9.8%.  Correspondingly, oprofiles showed that samples from
  __up_read and __down_read routines that is seen during thread contention
  for system resources was reduced from 2.8% down to .05%.  Monitoring the
  /proc/vmstat output from the patched run showed that the counter for
  fast_gup contained a very high number while the fast_gup_slow value was
  zero."

(fast_gup is the old name for get_user_pages_fast, fast_gup_slow is a
counter we had for the number of times the slowpath was invoked).

The main reason for the improvement is that DB2 has multiple threads each
issuing direct-IO.  Direct-IO uses get_user_pages, and thus the threads
contend the mmap_sem cacheline, and can also contend on page table locks.

I would anticipate larger performance gains on larger systems, however I
think DB2 uses an adaptive mix of threads and processes, so it could be
that thread contention remains pretty constant as machine size increases.
In which case, we stuck with "only" a 10% gain.

The downside of using get_user_pages_fast is that if there is not a pte
with the correct permissions for the access, we end up falling back to
get_user_pages and so the get_user_pages_fast is a bit of extra work.
However this should not be the common case in most performance critical
code.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: Kconfig fix]
[akpm@linux-foundation.org: Makefile fix/cleanup]
[akpm@linux-foundation.org: warning fix]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement the pte_special bit for x86.  This is required to support
lockless get_user_pages, because we need to know whether or not we can
refcount a particular page given only its pte (and no vma).

[hugh@veritas.com: fix a BUG]
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch provides an enhancement to kexec/kdump.  It implements the
following features:

- Backup/restore memory used by the original kernel before/after
  kexec.

- Save/restore CPU state before/after kexec.

The features of this patch can be used as a general method to call program in
physical mode (paging turning off).  This can be used to call BIOS code under
Linux.

kexec-tools needs to be patched to support kexec jump. The patches and
the precompiled kexec can be download from the following URL:

       source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2
       patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2
       binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10

Usage example of calling some physical mode code and return:

1. Compile and install patched kernel with following options selected:

CONFIG_X86_32=y
CONFIG_KEXEC=y
CONFIG_PM=y
CONFIG_KEXEC_JUMP=y

2. Build patched kexec-tool or download the pre-built one.

3. Build some physical mode executable named such as "phy_mode"

4. Boot kernel compiled in step 1.

5. Load physical mode executable with /sbin/kexec. The shell command
   line can be as follow:

   /sbin/kexec --load-preserve-context --args-none phy_mode

6. Call physical mode executable with following shell command line:

   /sbin/kexec -e

Implementation point:

To support jumping without reserving memory.  One shadow backup page (source
page) is allocated for each page used by kexeced code image (destination
page).  When do kexec_load, the image of kexeced code is loaded into source
pages, and before executing, the destination pages and the source pages are
swapped, so the contents of destination pages are backupped.  Before jumping
to the kexeced code image and after jumping back to the original kernel, the
destination pages and the source pages are swapped too.

C ABI (calling convention) is used as communication protocol between
kernel and called code.

A flag named KEXEC_PRESERVE_CONTEXT for sys_kexec_load is added to
indicate that the loaded kernel image is used for jumping back.

Now, only the i386 architecture is supported.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The calgary code can give drivers addresses above 4GB which is very bad
for hardware that is only 32bit DMA addressable.

With this patch, the calgary code sets the global dma_ops to swiotlb or
nommu properly, and the dma_ops of devices behind the Calgary/CalIOC2
to calgary_dma_ops.  So the calgary code can handle devices safely that
aren't behind the Calgary/CalIOC2.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NAlexis Bruemmer <alexisb@us.ibm.com>
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER
architecture does:

This enables us to cleanly fix the Calgary IOMMU issue that some devices
are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423).

I think that per-device dma_mapping_ops support would be also helpful for
KVM people to support PCI passthrough but Andi thinks that this makes it
difficult to support the PCI passthrough (see the above thread).  So I
CC'ed this to KVM camp.  Comments are appreciated.

A pointer to dma_mapping_ops to struct dev_archdata is added.  If the
pointer is non NULL, DMA operations in asm/dma-mapping.h use it.  If it's
NULL, the system-wide dma_ops pointer is used as before.

If it's useful for KVM people, I plan to implement a mechanism to register
a hook called when a new pci (or dma capable) device is created (it works
with hot plugging).  It enables IOMMUs to set up an appropriate
dma_mapping_ops per device.

The major obstacle is that dma_mapping_error doesn't take a pointer to the
device unlike other DMA operations.  So x86 can't have dma_mapping_ops per
device.  Note all the POWER IOMMUs use the same dma_mapping_error function
so this is not a problem for POWER but x86 IOMMUs use different
dma_mapping_error functions.

The first patch adds the device argument to dma_mapping_error.  The patch
is trivial but large since it touches lots of drivers and dma-mapping.h in
all the architecture.

This patch:

dma_mapping_error() doesn't take a pointer to the device unlike other DMA
operations.  So we can't have dma_mapping_ops per device.

Note that POWER already has dma_mapping_ops per device but all the POWER
IOMMUs use the same dma_mapping_error function.  x86 IOMMUs use device
argument.

[akpm@linux-foundation.org: fix sge]
[akpm@linux-foundation.org: fix svc_rdma]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix bnx2x]
[akpm@linux-foundation.org: fix s2io]
[akpm@linux-foundation.org: fix pasemi_mac]
[akpm@linux-foundation.org: fix sdhci]
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix sparc]
[akpm@linux-foundation.org: fix ibmvscsi]
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Avi Kivity <avi@qumranet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

x86 kernels on IBM Summit based systems will only online 1 CPU because the
phys_cpu_present_map is not set up correctly. Patch below applied to
2.6.26-git10.
Signed-off-by: NChris McDermott <lcm@linux.vnet.ibm.com>
Tested-by: NTim Pepper <lnxninga@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the include/asm-x86/gpio.h specials, just use the generic
version.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch removes the dummy asm/kvm.h files on architectures not (yet)
supporting KVM and uses the same conditional headers installation as
already used for a.out.h .

Also removed are superfluous install rules in the s390 and x86 Kbuild
files (they are already in Kbuild.asm).
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch contains the following cleanups for the asm/ptrace.h
userspace headers:

- include/asm-generic/Kbuild.asm already lists ptrace.h, remove
  the superfluous listings in the Kbuild files of the following
  architectures:
  - cris
  - frv
  - powerpc
  - x86
- don't expose function prototypes and macros to userspace:
  - arm
  - blackfin
  - cris
  - mn10300
  - parisc
- remove #ifdef CONFIG_'s around #define's:
  - blackfin
  - m68knommu
- sh: AFAIK __SH5__ should work in both kernel and userspace,
      no need to leak CONFIG_SUPERH64 to userspace
- xtensa: cosmetical change to remove empty
            #ifndef __ASSEMBLY__ #else #endif
          from the userspace headers

Not changed by this patch is the fact that the following architectures
have a different struct pt_regs depending on CONFIG_ variables:
- h8300
- m68knommu
- mips

This does not work in userspace.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NGrant Grundler <grundler@parisc-linux.org>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NChris Zankel <chris@zankel.net>
Acked-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds functionality to the gpio-lib subsystem to make it
possible to enable the gpio-lib code even if the architecture code didn't
request to get it built in.

The archtitecture code does still need to implement the gpiolib accessor
functions in its asm/gpio.h file.  This patch adds the implementations for
x86 and PPC.

With these changes it is possible to run generic GPIO expansion cards on
every architecture that implements the trivial wrapper functions.  Support
for more architectures can easily be added.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We duplicate alloc/free_thread_info defines on many platforms (the
majority uses __get_free_pages/free_pages).  This patch defines common
defines and removes these duplicated defines.
__HAVE_ARCH_THREAD_INFO_ALLOCATOR is introduced for platforms that do
something different.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suresh Siddha wants to fix a possible FPU leakage in error conditions,
but the fact that save/restore_i387() are inlines in a header file makes
that harder to do than necessary.  So start off with an obvious cleanup.

This just moves the x86-64 version of save/restore_i387() out of the
header file, and moves it to the only file that it is actually used in:
arch/x86/kernel/signal_64.c.  So exposing it in a header file was wrong
to begin with.

[ Side note: I'd like to fix up some of the games we play with the
  32-bit version of these functions too, but that's a separate
  matter.  The 32-bit versions are shared - under different names
  at that! - by both the native x86-32 code and the x86-64 32-bit
  compatibility code ]
Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* Remove <linux/irq.h> include from <asm-ia64.h> (<linux/ide.h> includes
  <linux/interrupt.h> which is enough).

* Remove <asm/ide.h> for alpha/blackfin/h8300/ia64/m32r/sh/x86/xtensa
  (this leaves us with arm/frv/m68k/mips/mn10300/parisc/powerpc/sparc[64]).

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Replace ide_default_{io_base,irq}() inlines by legacy_{bases,irqs}[].

v2:
Add missing zero-ing of hws[] (caught during testing by Borislav Petkov).

v3:
Fix zero-oing of hws[] for _real_ this time.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Now that ide_hwif_t instances are allocated dynamically
  the difference between MAX_HWIFS == 2 and MAX_HWIFS == 10
  is ~100 bytes (x86-32) so use MAX_HWIFS == 10 on all archs
  except these ones that use MAX_HWIFS == 1.

* Define MAX_HWIFS in <linux/ide.h> instead of <asm/ide.h>.

[ Please note that avr32/cris/v850 have no <asm/ide.h>
  and alpha/ia64/sh always define CONFIG_IDE_MAX_HWIFS. ]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Since the decision to probe for ISA ide2-6 is now left to the user
"no_pci_devices()" quirk is no longer needed and may be removed.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove the size parameter from the new epoll_create syscall and renames the
syscall itself.  The updated test program follows.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_epoll_create2
# ifdef __x86_64__
#  define __NR_epoll_create2 291
# elif defined __i386__
#  define __NR_epoll_create2 329
# else
#  error "need __NR_epoll_create2"
# endif
#endif

#define EPOLL_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_epoll_create2, 0);
  if (fd == -1)
    {
      puts ("epoll_create2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("epoll_create2(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_epoll_create2, EPOLL_CLOEXEC);
  if (fd == -1)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch introduces the new syscall inotify_init1 (note: the 1 stands for
the one parameter the syscall takes, as opposed to no parameter before).  The
values accepted for this parameter are function-specific and defined in the
inotify.h header.  Here the values must match the O_* flags, though.  In this
patch CLOEXEC support is introduced.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_inotify_init1
# ifdef __x86_64__
#  define __NR_inotify_init1 294
# elif defined __i386__
#  define __NR_inotify_init1 332
# else
#  error "need __NR_inotify_init1"
# endif
#endif

#define IN_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd;
  fd = syscall (__NR_inotify_init1, 0);
  if (fd == -1)
    {
      puts ("inotify_init1(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("inotify_init1(0) set close-on-exit");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_inotify_init1, IN_CLOEXEC);
  if (fd == -1)
    {
      puts ("inotify_init1(IN_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch introduces the new syscall pipe2 which is like pipe but it also
takes an additional parameter which takes a flag value.  This patch implements
the handling of O_CLOEXEC for the flag.  I did not add support for the new
syscall for the architectures which have a special sys_pipe implementation.  I
think the maintainers of those archs have the chance to go with the unified
implementation but that's up to them.

The implementation introduces do_pipe_flags.  I did that instead of changing
all callers of do_pipe because some of the callers are written in assembler.
I would probably screw up changing the assembly code.  To avoid breaking code
do_pipe is now a small wrapper around do_pipe_flags.  Once all callers are
changed over to do_pipe_flags the old do_pipe function can be removed.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_pipe2
# ifdef __x86_64__
#  define __NR_pipe2 293
# elif defined __i386__
#  define __NR_pipe2 331
# else
#  error "need __NR_pipe2"
# endif
#endif

int
main (void)
{
  int fd[2];
  if (syscall (__NR_pipe2, fd, 0) != 0)
    {
      puts ("pipe2(0) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int coe = fcntl (fd[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if (coe & FD_CLOEXEC)
        {
          printf ("pipe2(0) set close-on-exit for fd[%d]\n", i);
          return 1;
        }
    }
  close (fd[0]);
  close (fd[1]);

  if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0)
    {
      puts ("pipe2(O_CLOEXEC) failed");
      return 1;
    }
  for (int i = 0; i < 2; ++i)
    {
      int coe = fcntl (fd[i], F_GETFD);
      if (coe == -1)
        {
          puts ("fcntl failed");
          return 1;
        }
      if ((coe & FD_CLOEXEC) == 0)
        {
          printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i);
          return 1;
        }
    }
  close (fd[0]);
  close (fd[1]);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the new dup3 syscall.  It extends the old dup2 syscall by one
parameter which is meant to hold a flag value.  Support for the O_CLOEXEC flag
is added in this patch.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_dup3
# ifdef __x86_64__
#  define __NR_dup3 292
# elif defined __i386__
#  define __NR_dup3 330
# else
#  error "need __NR_dup3"
# endif
#endif

int
main (void)
{
  int fd = syscall (__NR_dup3, 1, 4, 0);
  if (fd == -1)
    {
      puts ("dup3(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("dup3(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_dup3, 1, 4, O_CLOEXEC);
  if (fd == -1)
    {
      puts ("dup3(O_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("dup3(O_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the new epoll_create2 syscall.  It extends the old epoll_create
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is EPOLL_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name EPOLL_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <time.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_epoll_create2
# ifdef __x86_64__
#  define __NR_epoll_create2 291
# elif defined __i386__
#  define __NR_epoll_create2 329
# else
#  error "need __NR_epoll_create2"
# endif
#endif

#define EPOLL_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_epoll_create2, 1, 0);
  if (fd == -1)
    {
      puts ("epoll_create2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("epoll_create2(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_epoll_create2, 1, EPOLL_CLOEXEC);
  if (fd == -1)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the new eventfd2 syscall.  It extends the old eventfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is EFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name EFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_eventfd2
# ifdef __x86_64__
#  define __NR_eventfd2 290
# elif defined __i386__
#  define __NR_eventfd2 328
# else
#  error "need __NR_eventfd2"
# endif
#endif

#define EFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  int fd = syscall (__NR_eventfd2, 1, 0);
  if (fd == -1)
    {
      puts ("eventfd2(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("eventfd2(0) sets close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("eventfd2(EFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the new signalfd4 syscall.  It extends the old signalfd
syscall by one parameter which is meant to hold a flag value.  In this
patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
flag for the returned file descriptor to be set.

A new name SFD_CLOEXEC is introduced which in this implementation must
have the same value as O_CLOEXEC.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>

#ifndef __NR_signalfd4
# ifdef __x86_64__
#  define __NR_signalfd4 289
# elif defined __i386__
#  define __NR_signalfd4 327
# else
#  error "need __NR_signalfd4"
# endif
#endif

#define SFD_CLOEXEC O_CLOEXEC

int
main (void)
{
  sigset_t ss;
  sigemptyset (&ss);
  sigaddset (&ss, SIGUSR1);
  int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
  if (fd == -1)
    {
      puts ("signalfd4(0) failed");
      return 1;
    }
  int coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if (coe & FD_CLOEXEC)
    {
      puts ("signalfd4(0) set close-on-exec flag");
      return 1;
    }
  close (fd);

  fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
  if (fd == -1)
    {
      puts ("signalfd4(SFD_CLOEXEC) failed");
      return 1;
    }
  coe = fcntl (fd, F_GETFD);
  if (coe == -1)
    {
      puts ("fcntl failed");
      return 1;
    }
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (fd);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is by far the most complex in the series.  It adds a new syscall
paccept.  This syscall differs from accept in that it adds (at the userlevel)
two additional parameters:

- a signal mask
- a flags value

The flags parameter can be used to set flag like SOCK_CLOEXEC.  This is
imlpemented here as well.  Some people argued that this is a property which
should be inherited from the file desriptor for the server but this is against
POSIX.  Additionally, we really want the signal mask parameter as well
(similar to pselect, ppoll, etc).  So an interface change in inevitable.

The flag value is the same as for socket and socketpair.  I think diverging
here will only create confusion.  Similar to the filesystem interfaces where
the use of the O_* constants differs, it is acceptable here.

The signal mask is handled as for pselect etc.  The mask is temporarily
installed for the thread and removed before the call returns.  I modeled the
code after pselect.  If there is a problem it's likely also in pselect.

For architectures which use socketcall I maintained this interface instead of
adding a system call.  The symmetry shouldn't be broken.

The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <sys/syscall.h>

#ifndef __NR_paccept
# ifdef __x86_64__
#  define __NR_paccept 288
# elif defined __i386__
#  define SYS_PACCEPT 18
#  define USE_SOCKETCALL 1
# else
#  error "need __NR_paccept"
# endif
#endif

#ifdef USE_SOCKETCALL
# define paccept(fd, addr, addrlen, mask, flags) \
  ({ long args[6] = { \
       (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \
     syscall (__NR_socketcall, SYS_PACCEPT, args); })
#else
# define paccept(fd, addr, addrlen, mask, flags) \
  syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags)
#endif

#define PORT 57392

#define SOCK_CLOEXEC O_CLOEXEC

static pthread_barrier_t b;

static void *
tf (void *arg)
{
  pthread_barrier_wait (&b);
  int s = socket (AF_INET, SOCK_STREAM, 0);
  struct sockaddr_in sin;
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);

  pthread_barrier_wait (&b);
  s = socket (AF_INET, SOCK_STREAM, 0);
  sin.sin_port = htons (PORT);
  connect (s, (const struct sockaddr *) &sin, sizeof (sin));
  close (s);
  pthread_barrier_wait (&b);

  pthread_barrier_wait (&b);
  sleep (2);
  pthread_kill ((pthread_t) arg, SIGUSR1);

  return NULL;
}

static void
handler (int s)
{
}

int
main (void)
{
  pthread_barrier_init (&b, NULL, 2);

  struct sockaddr_in sin;
  pthread_t th;
  if (pthread_create (&th, NULL, tf, (void *) pthread_self ()) != 0)
    {
      puts ("pthread_create failed");
      return 1;
    }

  int s = socket (AF_INET, SOCK_STREAM, 0);
  int reuse = 1;
  setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
  sin.sin_family = AF_INET;
  sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
  sin.sin_port = htons (PORT);
  bind (s, (struct sockaddr *) &sin, sizeof (sin));
  listen (s, SOMAXCONN);

  pthread_barrier_wait (&b);

  int s2 = paccept (s, NULL, 0, NULL, 0);
  if (s2 < 0)
    {
      puts ("paccept(0) failed");
      return 1;
    }

  int coe = fcntl (s2, F_GETFD);
  if (coe & FD_CLOEXEC)
    {
      puts ("paccept(0) set close-on-exec-flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  s2 = paccept (s, NULL, 0, NULL, SOCK_CLOEXEC);
  if (s2 < 0)
    {
      puts ("paccept(SOCK_CLOEXEC) failed");
      return 1;
    }

  coe = fcntl (s2, F_GETFD);
  if ((coe & FD_CLOEXEC) == 0)
    {
      puts ("paccept(SOCK_CLOEXEC) does not set close-on-exec flag");
      return 1;
    }
  close (s2);

  pthread_barrier_wait (&b);

  struct sigaction sa;
  sa.sa_handler = handler;
  sa.sa_flags = 0;
  sigemptyset (&sa.sa_mask);
  sigaction (SIGUSR1, &sa, NULL);

  sigset_t ss;
  pthread_sigmask (SIG_SETMASK, NULL, &ss);
  sigaddset (&ss, SIGUSR1);
  pthread_sigmask (SIG_SETMASK, &ss, NULL);

  sigdelset (&ss, SIGUSR1);
  alarm (4);
  pthread_barrier_wait (&b);

  errno = 0 ;
  s2 = paccept (s, NULL, 0, &ss, 0);
  if (s2 != -1 || errno != EINTR)
    {
      puts ("paccept did not fail with EINTR");
      return 1;
    }

  close (s);

  puts ("OK");

  return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: make it compile]
[akpm@linux-foundation.org: add sys_ni stub]
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Acked-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Roland McGrath <roland@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
boundary. For example:

	u64 val = PAGE_ALIGN(size);

always returns a value < 4GB even if size is greater than 4GB.

The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
example):

#define PAGE_SHIFT      12
#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK       (~(PAGE_SIZE-1))
...
#define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)

The "~" is performed on a 32-bit value, so everything in "and" with
PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
Using the ALIGN() macro seems to be the right way, because it uses
typeof(addr) for the mask.

Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
include/linux/mm.h.

See also lkml discussion: http://lkml.org/lkml/2008/6/11/237

[akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
[akpm@linux-foundation.org: fix v850]
[akpm@linux-foundation.org: fix powerpc]
[akpm@linux-foundation.org: fix arm]
[akpm@linux-foundation.org: fix mips]
[akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
[akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
[akpm@linux-foundation.org: fix powerpc]
Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an hugepagesz=...  option similar to IA64, PPC etc.  to x86-64.

This finally allows to select GB pages for hugetlbfs in x86 now that all
the infrastructure is in place.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The goal of this patchset is to support multiple hugetlb page sizes.  This
is achieved by introducing a new struct hstate structure, which
encapsulates the important hugetlb state and constants (eg.  huge page
size, number of huge pages currently allocated, etc).

The hstate structure is then passed around the code which requires these
fields, they will do the right thing regardless of the exact hstate they
are operating on.

This patch adds the hstate structure, with a single global instance of it
(default_hstate), and does the basic work of converting hugetlb to use the
hstate.

Future patches will add more hstate structures to allow for different
hugetlbfs mounts to have different page sizes.

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: NAdam Litke <agl@us.ibm.com>
Acked-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The double indirection here is not needed anywhere and hence (at least)
confusing.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to be able to debug things like the X server and programs using
the PPC Cell SPUs, the debugger needs to be able to access device memory
through ptrace and /proc/pid/mem.

This patch:

Add the generic_access_phys access function and put the hooks in place
to allow access_process_vm to access device or PPC Cell SPU memory.

[riel@redhat.com: Add documentation for the vm_ops->access function]
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NBenjamin Herrensmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All users have now been converted to linux/semaphore.h and we don't need
to keep these files around any longer.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>

Apparently,

commit 6330a30a
Author: Vegard Nossum <vegard.nossum@gmail.com>
Date:   Wed May 28 09:46:19 2008 +0200

    x86: break mutual header inclusion

introduced some CONFIG names to processor-flags.h, which was exported in

commit 6093015d
Author: Ingo Molnar <mingo@elte.hu>
Date:   Sun Mar 30 11:45:23 2008 +0200

    x86: cleanup replace most vm86 flags with flags from processor-flags.h, fix

Fix it by wrapping the CONFIG parts in __KERNEL__.
Reported-by: NOlaf Hering <olaf@aepfle.de>
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Olaf Hering <olaf@aepfle.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

PTE_PFN_MASK was getting lonely, so I made it a friend.
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Rusty, in his peevish way, complained that macros defining constants
should have a name which somewhat accurately reflects the actual
purpose of the constant.

Aside from the fact that PTE_MASK gives no clue as to what's actually
being masked, and is misleadingly similar to the functionally entirely
different PMD_MASK, PUD_MASK and PGD_MASK, I don't really see what the
problem is.

But if this patch silences the incessent noise, then it will have
achieved its goal (TODO: write test-case).
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

(Jeremy said:
	rusty: use PTE_MASK
	rusty: use PTE_MASK
	rusty: use PTE_MASK
 When I asked:
	jsgf: does that include the NX flag?
 He responded eloquently:
	rusty: use PTE_MASK
	rusty: use PTE_MASK
	yes, it's the official constant of masking flags out of ptes
)

Change a15af1c9 'x86/paravirt: add
pte_flags to just get pte flags' removed lguest's private pte_flags()
in favor of a generic one.

Unfortunately, the generic one doesn't filter out the non-flags bits:
this results in lguest creating corrupt shadow page tables and blowing
up host memory.

Since noone is supposed to use the pfn part of pte_flags(), it seems
safest to always do the filtering.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-and-morning-tea-spilled-by: NIngo Molnar <mingo@elte.hu>

There are a couple of places where (P)Dprintk is used which is an old
compile time enabled printk wrapper. Convert it to the generic
pr_debug().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

-tip testing found this build bug:

 arch/x86/kvm/built-in.o:(.text.fixup+0x1): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0xb): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0x15): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0x1f): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0x29): relocation truncated to fit: R_X86_64_32 against `.text'

Introduced by commit 4ecac3fd. The problem is that 'push' will default
to 32-bit, which is not wide enough as a fixup address. (and which would
crash on any real fixup event even if it was wide enough)

Introduce KVM_EX_PUSH to get the proper address push width on 64-bit too.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fixes compilation with CONFIG_VMI enabled.
Signed-off-by: NAvi Kivity <avi@qumranet.com>