Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 05 12月, 2019 1 次提交
  3. 22 5月, 2019 4 次提交
  5. 20 4月, 2019 1 次提交
    • J
      ext4: avoid panic during forced reboot · 90a1327e
      由 Jan Kara 提交于 
      [ Upstream commit 1dc1097ff60e4105216da7cd0aa99032b039a994 ]

When admin calls "reboot -f" - i.e., does a hard system reboot by
directly calling reboot(2) - ext4 filesystem mounted with errors=panic
can panic the system. This happens because the underlying device gets
disabled without unmounting the filesystem and thus some syscall running
in parallel to reboot(2) can result in the filesystem getting IO errors.

This is somewhat surprising to the users so try improve the behavior by
switching to errors=remount-ro behavior when the system is running
reboot(2).
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      90a1327e
  7. 17 1月, 2019 1 次提交
    • T
      ext4: avoid kernel warning when writing the superblock to a dead device · 01db6e5c
      由 Theodore Ts'o 提交于 
      commit e86807862e6880809f191c4cea7f88a489f0ed34 upstream.

The xfstests generic/475 test switches the underlying device with
dm-error while running a stress test.  This results in a large number
of file system errors, and since we can't lock the buffer head when
marking the superblock dirty in the ext4_grp_locked_error() case, it's
possible the superblock to be !buffer_uptodate() without
buffer_write_io_error() being true.

We need to set buffer_uptodate() before we call mark_buffer_dirty() or
this will trigger a WARN_ON.  It's safe to do this since the
superblock must have been properly read into memory or the mount would
have been successful.  So if buffer_uptodate() is not set, we can
safely assume that this happened due to a failed attempt to write the
superblock.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      01db6e5c
  9. 10 1月, 2019 4 次提交
    • T
      ext4: force inode writes when nfsd calls commit_metadata() · bf2fd1f9
      由 Theodore Ts'o 提交于 
      commit fde872682e175743e0c3ef939c89e3c6008a1529 upstream.

Some time back, nfsd switched from calling vfs_fsync() to using a new
commit_metadata() hook in export_operations().  If the file system did
not provide a commit_metadata() hook, it fell back to using
sync_inode_metadata().  Unfortunately doesn't work on all file
systems.  In particular, it doesn't work on ext4 due to how the inode
gets journalled --- the VFS writeback code will not always call
ext4_write_inode().

So we need to provide our own ext4_nfs_commit_metdata() method which
calls ext4_write_inode() directly.

Google-Bug-Id: 121195940
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bf2fd1f9
    • T
      ext4: avoid declaring fs inconsistent due to invalid file handles · 26366388
      由 Theodore Ts'o 提交于 
      commit 8a363970d1dc38c4ec4ad575c862f776f468d057 upstream.

If we receive a file handle, either from NFS or open_by_handle_at(2),
and it points at an inode which has not been initialized, and the file
system has metadata checksums enabled, we shouldn't try to get the
inode, discover the checksum is invalid, and then declare the file
system as being inconsistent.

This can be reproduced by creating a test file system via "mke2fs -t
ext4 -O metadata_csum /tmp/foo.img 8M", mounting it, cd'ing into that
directory, and then running the following program.

#define _GNU_SOURCE
#include <fcntl.h>

struct handle {
	struct file_handle fh;
	unsigned char fid[MAX_HANDLE_SZ];
};

int main(int argc, char **argv)
{
	struct handle h = {{8, 1 }, { 12, }};

	open_by_handle_at(AT_FDCWD, &h.fh, O_RDONLY);
	return 0;
}

Google-Bug-Id: 120690101
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      26366388
    • P
      ext4: fix possible use after free in ext4_quota_enable · 0a1c177d
      由 Pan Bian 提交于 
      commit 61157b24e60fb3cd1f85f2c76a7b1d628f970144 upstream.

The function frees qf_inode via iput but then pass qf_inode to
lockdep_set_quota_inode on the failure path. This may result in a
use-after-free bug. The patch frees df_inode only when it is never used.

Fixes: daf647d2 ("ext4: add lockdep annotations for i_data_sem")
Cc: stable@kernel.org # 4.6
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0a1c177d
    • T
      ext4: add ext4_sb_bread() to disambiguate ENOMEM cases · b878c8a7
      由 Theodore Ts'o 提交于 
      commit fb265c9cb49e2074ddcdd4de99728aefdd3b3592 upstream.

Today, when sb_bread() returns NULL, this can either be because of an
I/O error or because the system failed to allocate the buffer.  Since
it's an old interface, changing would require changing many call
sites.

So instead we create our own ext4_sb_bread(), which also allows us to
set the REQ_META flag.

Also fixed a problem in the xattr code where a NULL return in a
function could also mean that the xattr was not found, which could
lead to the wrong error getting returned to userspace.

Fixes: ac27a0ec ("ext4: initial copy of files from ext3")
Cc: stable@kernel.org # 2.6.19
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b878c8a7
  11. 21 11月, 2018 2 次提交
  13. 14 11月, 2018 1 次提交
  15. 16 9月, 2018 1 次提交
  17. 02 9月, 2018 1 次提交
    • T
      ext4: recalucate superblock checksum after updating free blocks/inodes · 4274f516
      由 Theodore Ts'o 提交于 
      When mounting the superblock, ext4_fill_super() calculates the free
blocks and free inodes and stores them in the superblock.  It's not
strictly necessary, since we don't use them any more, but it's nice to
keep them roughly aligned to reality.

Since it's not critical for file system correctness, the code doesn't
call ext4_commit_super().  The problem is that it's in
ext4_commit_super() that we recalculate the superblock checksum.  So
if we're not going to call ext4_commit_super(), we need to call
ext4_superblock_csum_set() to make sure the superblock checksum is
consistent.

Most of the time, this doesn't matter, since we end up calling
ext4_commit_super() very soon thereafter, and definitely by the time
the file system is unmounted.  However, it doesn't work in this
sequence:

mke2fs -Fq -t ext4 /dev/vdc 128M
mount /dev/vdc /vdc
cp xfstests/git-versions /vdc
godown /vdc
umount /vdc
mount /dev/vdc
tune2fs -l /dev/vdc

With this commit, the "tune2fs -l" no longer fails.
Reported-by: NChengguang Xu <cgxu519@gmx.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
      4274f516
  19. 30 7月, 2018 5 次提交
    • W
      ext4: fix race when setting the bitmap corrupted flag · 9af0b3d1
      由 Wang Shilong 提交于 
      Whenever we hit block or inode bitmap corruptions we set
bit and then reduce this block group free inode/clusters
counter to expose right available space.

However some of ext4_mark_group_bitmap_corrupted() is called
inside group spinlock, some are not, this could make it happen
that we double reduce one block group free counters from system.

Always hold group spinlock for it could fix it, but it looks
a little heavy, we could use test_and_set_bit() to fix race
problems here.
Signed-off-by: NWang Shilong <wshilong@ddn.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
      9af0b3d1
    • C
      ext4: check allocation failure when duplicating "data" in ext4_remount() · 21ac738e
      由 Chengguang Xu 提交于 
      There is no check for allocation failure when duplicating
"data" in ext4_remount(). Check for failure and return
error -ENOMEM in this case.
Signed-off-by: NChengguang Xu <cgxu519@gmx.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
      21ac738e
    • J
      ext4: fix warning message in ext4_enable_quotas() · 7f144fd0
      由 Junichi Uekawa 提交于 
      Output the warning message before we clobber type and be -1 all the time.
The error message would now be

[    1.519791] EXT4-fs warning (device vdb): ext4_enable_quotas:5402:
Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix.
Signed-off-by: NJunichi Uekawa <uekawa@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
      7f144fd0
    • A
      ext4: super: extend timestamps to 40 bits · 6a0678a7
      由 Arnd Bergmann 提交于 
      The inode timestamps use 34 bits in ext4, but the various timestamps in
the superblock are limited to 32 bits. If every user accesses these as
'unsigned', then this is good until year 2106, but it seems better to
extend this a bit further in the process of removing the deprecated
get_seconds() function.

This adds another byte for each timestamp in the superblock, making
them long enough to store timestamps beyond what is in the inodes,
which seems good enough here (in ocfs2, they are already 64-bit wide,
which is appropriate for a new layout).

I did not modify e2fsprogs, which obviously needs the same change to
actually interpret future timestamps correctly.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      6a0678a7
    • T
      ext4: fix check to prevent initializing reserved inodes · 50122847
      由 Theodore Ts'o 提交于 
      Commit 8844618d: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set.  Unfortunately, this is not correct,
since a freshly created file system has this flag cleared.  It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:

   mkfs.ext4 /dev/vdc
   mount -o ro /dev/vdc /vdc
   mount -o remount,rw /dev/vdc

Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.

This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.

Fixes: 8844618d ("ext4: only look at the bg_flags field if it is valid")
Reported-by: NEric Whitney <enwlinux@gmail.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      50122847
  21. 18 7月, 2018 1 次提交
  23. 09 7月, 2018 2 次提交
    • T
      ext4: clear mmp sequence number when remounting read-only · 2dca60d9
      由 Theodore Ts'o 提交于 
      Previously, when an MMP-protected file system is remounted read-only,
the kmmpd thread would exit the next time it woke up (a few seconds
later), without resetting the MMP sequence number back to
EXT4_MMP_SEQ_CLEAN.

Fix this by explicitly killing the MMP thread when the file system is
remounted read-only.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>
      2dca60d9
    • T
      ext4: fix false negatives *and* false positives in ext4_check_descriptors() · 44de022c
      由 Theodore Ts'o 提交于 
      Ext4_check_descriptors() was getting called before s_gdb_count was
initialized.  So for file systems w/o the meta_bg feature, allocation
bitmaps could overlap the block group descriptors and ext4 wouldn't
notice.

For file systems with the meta_bg feature enabled, there was a
fencepost error which would cause the ext4_check_descriptors() to
incorrectly believe that the block allocation bitmap overlaps with the
block group descriptor blocks, and it would reject the mount.

Fix both of these problems.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
      44de022c
  25. 03 7月, 2018 1 次提交
  27. 18 6月, 2018 1 次提交
    • T
      ext4: add more mount time checks of the superblock · bfe0a5f4
      由 Theodore Ts'o 提交于 
      The kernel's ext4 mount-time checks were more permissive than
e2fsprogs's libext2fs checks when opening a file system.  The
superblock is considered too insane for debugfs or e2fsck to operate
on it, the kernel has no business trying to mount it.

This will make file system fuzzing tools work harder, but the failure
cases that they find will be more useful and be easier to evaluate.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
      bfe0a5f4
  29. 17 6月, 2018 1 次提交
  31. 14 6月, 2018 2 次提交
  33. 13 6月, 2018 2 次提交
    • T
      ext4: add warn_on_error mount option · 327eaf73
      由 Theodore Ts'o 提交于 
      This is very handy when debugging bugs handling maliciously corrupted
file systems.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      327eaf73
    • K
      treewide: kvmalloc() -> kvmalloc_array() · 344476e1
      由 Kees Cook 提交于 
      The kvmalloc() function has a 2-factor argument form, kvmalloc_array(). This
patch replaces cases of:

        kvmalloc(a * b, gfp)

with:
        kvmalloc_array(a * b, gfp)

as well as handling cases of:

        kvmalloc(a * b * c, gfp)

with:

        kvmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kvmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kvmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kvmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kvmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kvmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kvmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kvmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kvmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kvmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kvmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kvmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kvmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kvmalloc
+ kvmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kvmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kvmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kvmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kvmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kvmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kvmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kvmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kvmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kvmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kvmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kvmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kvmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kvmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kvmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kvmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kvmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kvmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kvmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kvmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kvmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kvmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kvmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kvmalloc(C1 * C2 * C3, ...)
|
  kvmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kvmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kvmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kvmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kvmalloc(sizeof(THING) * C2, ...)
|
  kvmalloc(sizeof(TYPE) * C2, ...)
|
  kvmalloc(C1 * C2 * C3, ...)
|
  kvmalloc(C1 * C2, ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kvmalloc
+ kvmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)
Signed-off-by: NKees Cook <keescook@chromium.org>
      344476e1
  35. 31 5月, 2018 2 次提交
  37. 21 5月, 2018 2 次提交
  39. 14 5月, 2018 1 次提交
    • J
      ext4: handle errors on ext4_commit_super · c89128a0
      由 Jaegeuk Kim 提交于 
      When remounting ext4 from ro to rw, currently it allows its transition,
even if ext4_commit_super() returns EIO. Even worse thing is, after that,
fs/buffer complains buffer dirty bits like:

 Call trace:
 [<ffffff9750c259dc>] mark_buffer_dirty+0x184/0x1a4
 [<ffffff9750cb398c>] __ext4_handle_dirty_super+0x4c/0xfc
 [<ffffff9750c7a9fc>] ext4_file_open+0x154/0x1c0
 [<ffffff9750bea51c>] do_dentry_open+0x114/0x2d0
 [<ffffff9750bea75c>] vfs_open+0x5c/0x94
 [<ffffff9750bf879c>] path_openat+0x668/0xfe8
 [<ffffff9750bf8088>] do_filp_open+0x74/0x120
 [<ffffff9750beac98>] do_sys_open+0x148/0x254
 [<ffffff9750beade0>] SyS_openat+0x10/0x18
 [<ffffff9750a83ab0>] el0_svc_naked+0x24/0x28
 EXT4-fs (dm-1): previous I/O error to superblock detected
 Buffer I/O error on dev dm-1, logical block 0, lost sync page write
 EXT4-fs (dm-1): re-mounted. Opts: (null)
 Buffer I/O error on dev dm-1, logical block 80, lost async page write
Signed-off-by: NJaegeuk Kim <jaegeuk@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      c89128a0
  41. 12 5月, 2018 1 次提交
  43. 26 4月, 2018 1 次提交
  45. 30 3月, 2018 2 次提交