- 13 11月, 2005 11 次提交
-
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add a SharpSL PM device driver for the SL-Cxx00 machines. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add a SharpSL PM device driver for the SL-C7x0 machines. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
That's __phys_to_pfn, not __phy_to_pfn. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Use read/write IO operations rather than in/out, as per other SA1100 platforms. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Pavel Machek 提交于
This fixes compilation for collie after -rc1 platform_device changes. And yes, it even boots. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Updates to the SharpSL PM driver including cleanups from both Pavel Machek and myself and updates after the platform device changes to make it compile again. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Patch from Richard Purdie Add the core machine support for the Sharp SL-C1000 (Akita) and enable the Kconfig selection for it. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
We don't want to reset the DMA state machine while the other channel is in use. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Restore smp.c back to how it used to be. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
We must _never_ _ever_ on pain of death enable IDE DMA on SL82C105 chipsets where the southbridge revision is <= 5, otherwise data corruption will occur. Strangely this used to work, but something has changed in the upper echelons of the IDE layer to break the hosts decision to deny DMA. Let's make it crystal clear to the IDE layer that we know best. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Unfortunately, all these machines got broken when the PFN memory setup changes happened. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 11月, 2005 29 次提交
-
-
由 Linus Torvalds 提交于
As per the new release rules: two weeks of merging, and then an -rc1 and calming down for the next release.
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Neil Horman 提交于
Also introduces a sysctl option to configure the receive buffer accounting policy to be either at socket or association level. Default is all the associations on the same socket share the receive buffer. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Yasevich 提交于
On ia64, it is possible to get NaT Consumption Fault and a kernel panic when initializing sctp sideeffect commands arguments. The union sctp_arg_t contains different sized elements and when loading a smaller sized element (32 or 16 bits), it is possible for a speculative load to fail and result in a NaT bit set which causes a kernel crash. The easy way to get around it is to load the largerst member of the union. Signed-off-by: NVladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Yasevich 提交于
The socket level timeout values are maintained in sctp_sock and association level timeouts are in sctp_association. So there is no need for ep->timeouts. Signed-off-by: NVladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vladislav Yasevich 提交于
It is possible to get to sctp_v4_get_saddr() without a valid association. This happens when processing OOTB packets and the cached route entry is no longer valid. However, when responding to OOTB packets we already properly set the source address based on the information in the OOTB packet. So, if we we get to sctp_v4_get_saddr() without an association we can simply return. Signed-off-by: NVladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based mostly upon a patch from Olaf Kirch <okir@suse.de> When initialization fails in inet6_init(), we should unregister the PF_INET6 socket ops. Also, check sock_register()'s return value for errors. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Christie 提交于
scsi_wait_req does not exist any more in the SCSI layer. This patch makes it so libata can compile again. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
After the last merge of the new unified 'powerpc' architecture, ppc64 no longer compiles cleanly as a standalone architecture. Some bits and pieces still exist as files under the old ppc64 hierarchy, but the old "ARCH=ppc64" is dead. So if "uname" says ppc64, that now implies that the default architecture should be "powerpc". Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Update the ixp2000 defconfigs to 2.6.14-git13. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre For assembly labels to actually be local they must start with ".L" and not only "." otherwise they still remain visible in the final link and clutter kallsyms needlessly, and possibly make for unclear symbolic backtrace. This patch simply inserts a"L" where appropriate. The code itself is unchanged. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre For assembly labels to actually be local they must start with ".L" and not only "." otherwise they still remain visible in the final link and clutter kallsyms needlessly, and possibly make for unclear symbolic backtrace. This patch simply inserts a"L" where appropriate. The code itself is unchanged. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre For assembly labels to actually be local they must start with ".L" and not only "." otherwise they still remain visible in the final link and clutter kallsyms needlessly, and possibly make for unclear symbolic backtrace. This patch simply inserts a"L" where appropriate. The code itself is unchanged. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David S. Miller 提交于
Noticed by Tom 'spot' Callaway. Even on uniprocessor we always reported the number of physical cpus in the system via /proc/cpuinfo. But when this got changed to use num_possible_cpus() it always reads as "1" on uniprocessor. This change was unintentional. So scan the firmware device tree and count the number of cpu nodes, and report that, as we always did. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick Caulfield 提交于
Currently recvmsg generates SIGPIPE whereas sendmsg does not; for the other stacks it seems to be the other way round! It also fixes the bug where reading from a socket whose peer has shutdown returned -EINVAL rather than 0. Signed-off-by: NPatrick Caulfield <patrick@tykepenguin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Maule 提交于
Fix default VGA console on SN platforms. Since SN firmware does not pass enough ACPI information to identify VGA cards and the associated legacy IO/MEM addresses, we rely on the EFI PCDP table. Since the linux pcdp driver is optional (and overridden if console= directives are used) SN duplicates a portion of the pcdp scan code to identify if there is a usable console VGA adapter. Additionally, dup necessary pcdp related structs to avoid dragging drivers/pcdp.h into a more public location. Signed-off-by: NMark Maule <maule@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Robin Holt 提交于
This patch introduces 4-level page tables to ia64. I have run some benchmarks and found nothing interesting. Performance has consistently fallen within the noise range. It also introduces a config option (setting the default to 3 levels). The config option prevents having 4 level page tables with 64k base page size. Signed-off-by: NRobin Holt <holt@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Hironobu Ishii 提交于
Part of a patch was accidentally reverted, this corrects an inconsistent spinlock use in the IPMI message handler. Signed-off-by: NHironobu Ishii <hishii@soft.fujitsu.com> Signed-off-by: NCorey Minyard <minyard@acm.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-