- 25 10月, 2013 4 次提交
-
-
由 Mark Rutland 提交于
With the advent of CPU_HOTPLUG, the enable-method property for CPU0 may tells us something useful (i.e. how to hotplug it back on), so we must read it along with all the enable-method for all the other CPUs. Even on UP the enable-method may tell us useful information (e.g. if a core has some mechanism that might be usable for cpuidle), so we should always read it. This patch factors out the reading of the enable method, and ensures that CPU0's enable method is read regardless of whether the kernel is built with SMP support. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Rutland 提交于
The arm64 kernel has an internal holding pen, which is necessary for some systems where we can't bring CPUs online individually and must hold multiple CPUs in a safe area until the kernel is able to handle them. The current SMP infrastructure for arm64 is closely coupled to this holding pen, and alternative boot methods must launch CPUs into the pen, where they sit before they are launched into the kernel proper. With PSCI (and possibly other future boot methods), we can bring CPUs online individually, and need not perform the secondary_holding_pen dance. Instead, this patch factors the holding pen management code out to the spin-table boot method code, as it is the only boot method requiring the pen. A new entry point for secondaries, secondary_entry is added for other boot methods to use, which bypasses the holding pen and its associated overhead when bringing CPUs online. The smp.pen.text section is also removed, as the pen can live in head.text without problem. The cpu_operations structure is extended with two new functions, cpu_boot and cpu_postboot, for bringing a cpu into the kernel and performing any post-boot cleanup required by a bootmethod (e.g. resetting the secondary_holding_pen_release to INVALID_HWID). Documentation is added for cpu_operations. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Rutland 提交于
For hotplug support, we're going to want a place to store operations that do more than bring CPUs online, and it makes sense to group these with our current smp_enable_ops. For cpuidle support, we'll want to group additional functions, and we may want them even for UP kernels. This patch renames smp_enable_ops to the more general cpu_operations, and pulls the definitions out of smp code such that they can be used in UP kernels. While we're at it, fix up instances of the cpu parameter to be an unsigned int, drop the init markings and rename the *_cpu functions to cpu_* to reduce future churn when cpu_operations is extended. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Mark Rutland 提交于
The functions in psci.c are only used from smp_psci.c, and smp_psci cannot function without psci.c. Additionally psci.c is built when !SMP, where it's expected that cpu_suspend may be useful. This patch unifies the two files, removing pointless duplication and paving the way for PSCI support in UP systems. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 24 10月, 2013 1 次提交
-
-
由 Catalin Marinas 提交于
This function may be called from loadable modules, so it needs exporting. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NLoc Ho <lho@apm.com>
-
- 28 9月, 2013 1 次提交
-
-
由 Jiang Liu 提交于
If context switching happens during executing fpsimd_flush_thread(), stale value in FPSIMD registers will be saved into current thread's fpsimd_state by fpsimd_thread_switch(). That may cause invalid initialization state for the new process, so disable preemption when executing fpsimd_flush_thread(). Signed-off-by: NJiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 20 9月, 2013 2 次提交
-
-
由 Steve Capper 提交于
Under arm64 elf_hwcap is a 32 bit quantity, but it is stored in a 64 bit auxiliary ELF field and glibc reads hwcap as 64 bit. This patch widens elf_hwcap to be 64 bit. Signed-off-by: NSteve Capper <steve.capper@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
When a task crashes and we print debugging information, ensure that compat tasks show the actual AArch32 LR and SP registers rather than the AArch64 ones. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 03 9月, 2013 1 次提交
-
-
由 Will Deacon 提交于
TCR.TBI0 can be used to cause hardware address translation to ignore the top byte of userspace virtual addresses. Whilst not especially useful in standard C programs, this can be used by JITs to `tag' pointers with various pieces of metadata. This patch enables this bit for AArch64 Linux, and adds a new file to Documentation/arm64/ which describes some potential caveats when using tagged virtual addresses. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 31 8月, 2013 1 次提交
-
-
由 Will Deacon 提交于
We always use a timer-backed delay loop for arm64, so don't bother reporting a bogomips value which appears to confuse some people. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 29 8月, 2013 1 次提交
-
-
由 Grant Likely 提交于
Most architectures use the same implementation. Collapse the common ones into a single weak function that can be overridden. Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
- 28 8月, 2013 1 次提交
-
-
由 Mark Salter 提交于
The current vmlinux.lds.S places the notes sections between the end of rw data and start of bss. This means that _edata doesn't really point to the end of data. Since notes are read-only, this patch moves them to the read-only segment so that _edata does point to the end of initialized rw data. Signed-off-by: NMark Salter <msalter@redhat.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 22 8月, 2013 2 次提交
-
-
由 Catalin Marinas 提交于
do_undefinstr() has to be called with interrupts disabled since it may read the instruction from the user address space which could lead to a data abort and subsequent might_sleep() warning in do_page_fault(). Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Roy Franz 提交于
Expand the arm64 image header to allow for co-existance with PE/COFF header required by the EFI stub. The PE/COFF format requires the "MZ" header to be at offset 0, and the offset to the PE/COFF header to be at offset 0x3c. The image header is expanded to allow 2 instructions at the beginning to accommodate a benign intruction at offset 0 that includes the "MZ" header, a magic number, and the offset to the PE/COFF header. Signed-off-by: NRoy Franz <roy.franz@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 20 8月, 2013 5 次提交
-
-
由 Ard Biesheuvel 提交于
Add <asm/neon.h> containing kernel_neon_begin/kernel_neon_end function declarations and corresponding definitions in fpsimd.c These are needed to wrap uses of NEON in kernel mode. The names are identical to the ones used in arm/ so code using intrinsics or vectorized by GCC can be shared between arm and arm64. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
This is a port of f2fe09b0 ("ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit") to arm64, which fixes the broken evtype mask to include the NSH bit, allowing profiling at EL2. Cc: <stable@vger.kernel.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
This is a port of cb2d8b34 ("ARM: 7698/1: perf: fix group validation when using enable_on_exec") to arm64, which fixes the event validation checking so that events in the OFF state are still considered when enable_on_exec is true. Cc: <stable@vger.kernel.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
This is a port of c95eb318 ("ARM: 7809/1: perf: fix event validation for software group leaders") to arm64, which fixes a panic in the arm64 perf backend found as a result of Vince's fuzzing tool. Cc: <stable@vger.kernel.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
This is a port of d9f96635 ("ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event()") to arm64, which fixes an oops in the arm64 perf backend found as a result of Vince's fuzzing tool. Cc: <stable@vger.kernel.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 26 7月, 2013 1 次提交
-
-
由 Feng Kan 提交于
Written by Catalin Marinas, tested by APM on storm platform. This is needed because of the failures encountered when running SpecWeb benchmark test. Signed-off-by: NFeng Kan <fkan@apm.com> Acked-by: NKumar Sankaran <ksankaran@apm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 23 7月, 2013 1 次提交
-
-
由 Catalin Marinas 提交于
Commit ff701306 (arm64: use common reboot infrastructure) converted the arm_pm_restart declaration to the new reboot infrastructure but missed the actual definition. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 19 7月, 2013 2 次提交
-
-
由 Marc Zyngier 提交于
Commit 7b6d864b (reboot: arm: change reboot_mode to use enum reboot_mode) changed the way reboot is handled on arm, which has a direct impact on arm64 as we share the reset driver on the VE platform. The obvious fix is to move arm64 to use the same infrastructure. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> [catalin.marinas@arm.com: removed reboot_mode = REBOOT_HARD default setting] Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
There is a slight chance that (timer) interrupts are triggered before a secondary CPU has been marked online with implications on softirq thread affinity. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NKirill Tkhai <tkhai@yandex.ru>
-
- 15 7月, 2013 1 次提交
-
-
由 Paul Gortmaker 提交于
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/arm64 uses of the __cpuinit macros from all C files. Currently arm64 does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 04 7月, 2013 1 次提交
-
-
由 Marc Zyngier 提交于
Finally plug KVM/arm64 into the config system, making it possible to enable KVM support on AArch64 CPUs. Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 20 6月, 2013 1 次提交
-
-
由 Jed Davis 提交于
With this change, we no longer lose the innermost entry in the user-mode part of the call chain. See also the x86 port, which includes the ip, and the corresponding change in arch/arm. Signed-off-by: NJed Davis <jld@mozilla.com> Acked-by: NIngo Molnar <mingo@kernel.org> Acked-by: NWill Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 12 6月, 2013 3 次提交
-
-
由 Marc Zyngier 提交于
The HYP mode world switch in all its glory. Implements save/restore of host/guest registers, EL2 trapping, IPA resolution, and additional services (tlb invalidation). Reviewed-by: NChristopher Covington <cov@codeaurora.org> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Will Deacon 提交于
The software breakpoint handlers are hooked in directly from ptrace, which makes it difficult to add additional handlers for things like kprobes and kgdb. This patch moves the handling code into debug-monitors.c, where we can dispatch to different debug subsystems more easily. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
As is done for other architectures, sort the exception table at build-time rather than during boot. Since sortextable appears to be a standalone C program relying on the host elf.h to provide EM_AARCH64, I've had to add a conditional check in order to allow cross-compilation on machines that aren't running a bleeding-edge libc-dev. Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 11 6月, 2013 1 次提交
-
-
由 Chen Gang 提交于
Under arm64, we will calibrate the delay loop statically using a known timer frequency, so delete read_current_timer(), or it will cause compiling issue with allmodconfig. The related error: ERROR: "read_current_timer" [lib/rbtree_test.ko] undefined! ERROR: "read_current_timer" [lib/interval_tree_test.ko] undefined! ERROR: "read_current_timer" [fs/ext4/ext4.ko] undefined! ERROR: "read_current_timer" [crypto/tcrypt.ko] undefined! Signed-off-by: NChen Gang <gang.chen@asianux.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 07 6月, 2013 1 次提交
-
-
由 Marc Zyngier 提交于
Add the necessary infrastructure for identity-mapped HYP page tables. Idmap-ed code must be in the ".hyp.idmap.text" linker section. The rest of the HYP ends up in ".hyp.text". Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
- 31 5月, 2013 2 次提交
-
-
由 Mark Rutland 提交于
Rather than completely killing the kernel if we receive an esr value we can't deal with in the el0 handlers, send the process a SIGILL and log the esr value in the hope that we can debug it. If we receive a bad esr from el1, we'll die() as before. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org
-
由 Mark Rutland 提交于
Currently, if a compat process reads or writes from/to a disabled cp15/cp14 register, the trap is not handled by the el0_sync_compat handler, and the kernel will head to bad_mode, where it will die(), and oops(). For 64 bit processes, disabled system register accesses are currently treated as unhandled instructions. This patch modifies entry.S to treat these unhandled traps as undefined instructions, sending a SIGILL to userspace. This gives processes a chance to handle this and stop using inaccessible registers, and prevents further issues in the kernel as a result of the die(). Reported-by: NJohannes Jensen <Johannes.Jensen@arm.com> Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 25 5月, 2013 2 次提交
-
-
由 Catalin Marinas 提交于
Currently user faults (page, undefined instruction) are always reported even though the user may have a signal handler for them. This patch adds unhandled_signal() check together with printk_ratelimit() for these cases. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Chen Gang 提交于
Need 'EXPORT_SYMBOL(clear_page)' if building with allmodconfig. The related errors: ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined! ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined! ERROR: "clear_page" [fs/gfs2/gfs2.ko] undefined! ERROR: "clear_page" [fs/fuse/fuse.ko] undefined! ERROR: "clear_page" [fs/ext3/ext3.ko] undefined! ERROR: "clear_page" [fs/ext2/ext2.ko] undefined! ERROR: "clear_page" [fs/exofs/libore.ko] undefined! ERROR: "clear_page" [fs/exofs/exofs.ko] undefined! ERROR: "clear_page" [drivers/block/brd.ko] undefined! Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 14 5月, 2013 1 次提交
-
-
由 Catalin Marinas 提交于
The of_platform_populate() is currently invoked at device_initcall() level. There are however drivers that use platform_driver_probe() directly and they need the devices to be populated. This patch makes the of_platform_populate() and arch_initcall(). Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Reported-by: NBenoit Lecardonnel <Benoit.Lecardonnel@synopsys.com> Tested-by: NBenoit Lecardonnel <Benoit.Lecardonnel@synopsys.com>
-
- 13 5月, 2013 2 次提交
-
-
由 Will Deacon 提交于
During boot, we take the debug OS lock before interrupts are enabled. This is required to prevent clearing of PSTATE.D on the interrupt entry path, which could result in spurious debug exceptions before we've got round to resetting things like the hardware breakpoints registers to a sane state. A problem with this approach is that taking the OS lock prevents an external JTAG debugger from debugging the system, which is especially irritating during boot, where JTAG debugging can be most useful. This patch clears mdscr_el1 rather than taking the lock, clearing the MDE and KDE bits and preventing self-hosted hardware debug exceptions from occurring. Tested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Cc: stable@vger.kernel.org
-
由 Chen Gang 提交于
When compiling with allmodconfig. early_console is already defined as an extern global pointer. Need let it point to the object which we intend to (like arm32 done). Signed-off-by: NChen Gang <gang.chen@asianux.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
- 10 5月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 08 5月, 2013 1 次提交
-
-
由 Catalin Marinas 提交于
This patch adds the arm_pm_poweroff definition expected by the vexpress-poweroff.c driver and enables the latter for arm64. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NPawel Moll <pawel.moll@arm.com>
-