Add gcmaes_crypt_by_sg routine, that will do scatter/gather
by sg. Either src or dst may contain multiple buffers, so
iterate over both at the same time if they are different.
If the input is the same as the output, iterate only over one.

Currently both the AAD and TAG must be linear, so copy them out
with scatterlist_map_and_copy.  If first buffer contains the
entire AAD, we can optimize and not copy.   Since the AAD
can be any size, if copied it must be on the heap.  TAG can
be on the stack since it is always < 16 bytes.

Only the SSE routines are updated so far, so leave the previous
gcmaes_en/decrypt routines, and branch to the sg ones if the
keysize is inappropriate for avx, or we are SSE only.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The asm macros are all set up now, introduce entry points.

GCM_INIT and GCM_COMPLETE have arguments supplied, so that
the new scatter/gather entry points don't have to take all the
arguments, and only the ones they need.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We can fast-path any < 16 byte read if the full message is > 16 bytes,
and shift over by the appropriate amount.  Usually we are
reading > 16 bytes, so this should be faster than the READ_PARTIAL
macro introduced in b20209c9 for the average case.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Before this diff, multiple calls to GCM_ENC_DEC will
succeed, but only if all calls are a multiple of 16 bytes.

Handle partial blocks at the start of GCM_ENC_DEC, and update
aadhash as appropriate.

The data offset %r11 is also updated after the partial block.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

HashKey computation only needs to happen once per scatter/gather operation,
save it between calls in gcm_context struct instead of on the stack.
Since the asm no longer stores anything on the stack, we can use
%rsp directly, and clean up the frame save/restore macros a bit.

Hashkeys actually only need to be calculated once per key and could
be moved to when set_key is called, however, the current glue code
falls back to generic aes code if fpu is disabled.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Prepare to handle partial blocks between scatter/gather calls.
For the last partial block, we only want to calculate the aadhash
in GCM_COMPLETE, and a new partial block macro will handle both
aadhash update and encrypting partial blocks between calls.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fill in aadhash, aadlen, pblocklen, curcount with appropriate values.
pblocklen, aadhash, and pblockenckey are also updated at the end
of each scatter/gather operation, to be carried over to the next
operation.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

AAD hash only needs to be calculated once for each scatter/gather operation.
Move it to its own macro, and call it from GCM_INIT instead of
INITIAL_BLOCKS.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Introduce a gcm_context_data struct that will be used to pass
context data between scatter/gather update calls.  It is passed
as the second argument (after crypto keys), other args are
renumbered.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Make a macro for the main encode/decode routine.  Only a small handful
of lines differ for enc and dec.   This will also become the main
scatter/gather update routine.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Merge encode and decode tag calculations in GCM_COMPLETE macro.
Scatter/gather routines will call this once at the end of encryption
or decryption.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Reduce code duplication by introducting GCM_INIT macro.  This macro
will also be exposed as a function for implementing scatter/gather
support, since INIT only needs to be called once for the full
operation.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Macro-ify function save and restore.  These will be used in new functions
added for scatter/gather update operations.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use macro operations to merge implemetations of INITIAL_BLOCKS,
since they differ by only a small handful of lines.

Use macro counter \@ to simplify implementation.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Two local variables will eventually be set to appropriate pointers
a bit later. Thus omit their explicit initialisation at the beginning.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Replace the function name in this error message so that the same name
is mentioned according to what was called before.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The local variable "cryp_error" was used only for two condition checks.

* Check the return values from these function calls directly instead.

* Delete this variable which became unnecessary with this refactoring.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The RSA private key for the first form should have
version, prime1, prime2, exponent1, exponent2, coefficient
values 0.
With non-zero values for prime1,2, exponent 1,2 and coefficient
the Intel QAT driver will assume that values are provided for the
private key second form. This will result in signature verification
failures for modules where QAT device is present and the modules
are signed with rsa,sha256.

Cc: <stable@vger.kernel.org>
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NConor McLoughlin <conor.mcloughlin@intel.com>
Reviewed-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a label to unmap the result buffer in the hash send
function error path.

Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Suggested-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch updates the Inside Secure SafeXcel driver to avoid being
out-of-sync between the number of requests sent and the one being
completed.

The number of requests acknowledged by the driver can be different than
the threshold that was configured if new requests were being pushed to
the h/w in the meantime. The driver wasn't taking those into account,
and the number of remaining requests to handled (to reconfigure the
interrupt threshold) could be out-of sync.

This patch fixes it by not taking in account the number of requests
left, but by taking in account the total number of requests being sent
to the hardware, so that new requests are being taken into account.

Fixes: dc7e28a3 ("crypto: inside-secure - dequeue all requests at once")
Suggested-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When exiting a transformation, the cra_exit() helper is called in each
driver providing one. The Inside Secure SafeXcel driver has one, which
is responsible of freeing some areas and of sending one invalidation
request to the crypto engine, to invalidate the context that was used
during the transformation.

We could see in some setups (when lots of transformations were being
used with a short lifetime, and hence lots of cra_exit() calls) NULL
pointer dereferences and other weird issues. All these issues were
coming from accessing the tfm context.

The issue is the invalidation request completion is checked using a
wait_for_completion_interruptible() call in both the cipher and hash
cra_exit() helpers. In some cases this was interrupted while the
invalidation request wasn't processed yet. And then cra_exit() returned,
and its caller was freeing the tfm instance. Only then the request was
being handled by the SafeXcel driver, which lead to the said issues.

This patch fixes this by using wait_for_completion() calls in these
specific cases.

Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds a check in the SafeXcel dequeue function, to avoid
processing request further if no hardware command was issued. This can
happen in certain cases where the ->send() function caches all the data
that would have been send.

Fixes: 809778e0 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes the cache length computation as cache_len could end up
being a negative value. The check between the queued size and the
block size is updated to reflect the caching mechanism which can cache
up to a full block size (included!).

Fixes: 809778e0 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes the extra cache computation when the queued data is a
multiple of a block size. This fixes the hash support in some cases.

Fixes: 809778e0 ("crypto: inside-secure - fix hash when length is a multiple of a block")
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes the Inside Secure SafeXcel driver not to overwrite the
interrupt threshold value. In certain cases the value of this register,
which controls when to fire an interrupt, was overwritten. This lead to
packet not being processed or acked as the driver never was aware of
their completion.

This patch fixes this behaviour by not setting the threshold when
requests are being processed by the engine.

Fixes: dc7e28a3 ("crypto: inside-secure - dequeue all requests at once")
Suggested-by: NOfer Heifetz <oferh@marvell.com>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Free Electrons became Bootlin. Update my email accordingly.
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In case the probe of the clock is deferred, we would assume it is
optional. This is wrong, so defer the probe of this driver until
the clock is available.

Fixes: 791af4f4 ("hwrng: bcm2835 - Manage an optional clock")
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move the AES inverse S-box to the .rodata section
where it is safe from abuse by speculation.
Signed-off-by: NJinbum Park <jinb.park7@gmail.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The MODULE_ALIAS is required to enable the sun4i-ss driver to load
automatically when built at a module. Tested on a Cubietruck.

Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: NPeter Robinson <pbrobinson@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

stm32mp1 differs from stm32f7 in the way it handles byte ordering and
padding for aes gcm & ccm algo.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add AEAD cipher algorithms for aes gcm and ccm.
Signed-off-by: NFabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Functions qat_rsa_set_n, qat_rsa_set_e and qat_rsa_set_n are local to
the source and do not need to be in global scope, so make them static.

Cleans up sparse warnings:
drivers/crypto/qat/qat_common/qat_asym_algs.c:972:5: warning: symbol
'qat_rsa_set_n' was not declared. Should it be static?
drivers/crypto/qat/qat_common/qat_asym_algs.c:1003:5: warning: symbol
'qat_rsa_set_e' was not declared. Should it be static?
drivers/crypto/qat/qat_common/qat_asym_algs.c:1027:5: warning: symbol
'qat_rsa_set_d' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Function ccp_get_dma_chan_attr is local to the source and does not
need to be in global scope, so make it static.

Cleans up sparse warning:
drivers/crypto/ccp/ccp-dmaengine.c:41:14: warning: symbol
'ccp_get_dma_chan_attr' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Function aead_ccm_validate_input is local to the source and does not
need to be in global scope, so make it static.

Cleans up sparse warning:
drivers/crypto/chelsio/chcr_algo.c:2627:5: warning: symbol
'aead_ccm_validate_input' was not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

 multibuffer driver

Even though I created the original implementation of SHA1 multibuffer
driver, Megha extended it to SHA256 and SHA512 and she is now maintaining
the code for SHA1/SHA256/SHA512 multi-buffer driver.

Add the entry in the MAINTAINERS file so any update patch can find
its way properly to Megha.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Due to another patch, the dma fails when padding is
needed as the given length is not correct.
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>