Fix a corner case for MAP_FIXED when requested mapping length is larger
than rlimit for virtual memory.  In such case any overlapping mappings
are unmapped before we check for the limit and return ENOMEM.

The check is moved before the loop that unmaps overlapping parts of
existing mappings.  When we are about to hit the limit (currently mapped
pages + len > limit) we scan for overlapping pages and check again
accounting for them.

This fixes situation when userspace program expects that the previous
mappings are preserved after the mmap() syscall has returned with error.
(POSIX clearly states that successfull mapping shall replace any
previous mappings.)

This corner case was found and can be tested with LTP testcase:

testcases/open_posix_testsuite/conformance/interfaces/mmap/24-2.c

In this case the mmap, which is clearly over current limit, unmaps
dynamic libraries and the testcase segfaults right after returning into
userspace.

I've also looked at the second instance of the unmapping loop in the
do_brk().  The do_brk() is called from brk() syscall and from vm_brk().
The brk() syscall checks for overlapping mappings and bails out when
there are any (so it can't be triggered from the brk syscall).  The
vm_brk() is called only from binmft handlers so it shouldn't be
triggered unless binmft handler created overlapping mappings.
Signed-off-by: NCyril Hrubis <chrubis@suse.cz>
Reviewed-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With this patch userland applications that want to maintain the
interactivity/memory allocation cost can use the pressure level
notifications.  The levels are defined like this:

The "low" level means that the system is reclaiming memory for new
allocations.  Monitoring this reclaiming activity might be useful for
maintaining cache level.  Upon notification, the program (typically
"Activity Manager") might analyze vmstat and act in advance (i.e.
prematurely shutdown unimportant services).

The "medium" level means that the system is experiencing medium memory
pressure, the system might be making swap, paging out active file
caches, etc.  Upon this event applications may decide to further analyze
vmstat/zoneinfo/memcg or internal memory usage statistics and free any
resources that can be easily reconstructed or re-read from a disk.

The "critical" level means that the system is actively thrashing, it is
about to out of memory (OOM) or even the in-kernel OOM killer is on its
way to trigger.  Applications should do whatever they can to help the
system.  It might be too late to consult with vmstat or any other
statistics, so it's advisable to take an immediate action.

The events are propagated upward until the event is handled, i.e.  the
events are not pass-through.  Here is what this means: for example you
have three cgroups: A->B->C.  Now you set up an event listener on
cgroups A, B and C, and suppose group C experiences some pressure.  In
this situation, only group C will receive the notification, i.e.  groups
A and B will not receive it.  This is done to avoid excessive
"broadcasting" of messages, which disturbs the system and which is
especially bad if we are low on memory or thrashing.  So, organize the
cgroups wisely, or propagate the events manually (or, ask us to
implement the pass-through events, explaining why would you need them.)

Performance wise, the memory pressure notifications feature itself is
lightweight and does not require much of bookkeeping, in contrast to the
rest of memcg features.  Unfortunately, as of current memcg
implementation, pages accounting is an inseparable part and cannot be
turned off.  The good news is that there are some efforts[1] to improve
the situation; plus, implementing the same, fully API-compatible[2]
interface for CONFIG_MEMCG=n case (e.g.  embedded) is also a viable
option, so it will not require any changes on the userland side.

[1] http://permalink.gmane.org/gmane.linux.kernel.cgroups/6291
[2] http://lkml.org/lkml/2013/2/21/454

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix CONFIG_CGROPUPS=n warnings]
Signed-off-by: NAnton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: NKirill A. Shutemov <kirill@shutemov.name>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Leonid Moiseichuk <leonid.moiseichuk@nokia.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In madvise(), there doesn't seem to be any reason for taking the
&current->mm->mmap_sem before start and len_in have been validated.
Incidentally, this removes the need for the out: label.

[akpm@linux-foundation.org: s/out_plug/out/, per David]
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__remove_pages() is only necessary for CONFIG_MEMORY_HOTREMOVE.  PowerPC
pseries will return -EOPNOTSUPP if unsupported.

Adding an #ifdef causes several other functions it depends on to also
become unnecessary, which saves in .text when disabled (it's disabled in
most defconfigs besides powerpc, including x86).  remove_memory_block()
becomes static since it is not referenced outside of
drivers/base/memory.c.

Build tested on x86 and powerpc with CONFIG_MEMORY_HOTREMOVE both enabled
and disabled.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change __remove_pages() to call release_mem_region_adjustable().  This
allows a requested memory range to be released from the iomem_resource
table even if it does not match exactly to an resource entry but still
fits into.  The resource entries initialized at bootup usually cover the
whole contiguous memory ranges and may not necessarily match with the
size of memory hot-delete requests.

If release_mem_region_adjustable() failed, __remove_pages() emits a
warning message and continues to proceed as it was the case with
release_mem_region().  release_mem_region(), which is defined to
__release_region(), emits a warning message and returns no error since a
void function.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Reviewed-by : Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: T Makphaibulchoke <tmac@hp.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add release_mem_region_adjustable(), which releases a requested region
from a currently busy memory resource.  This interface adjusts the
matched memory resource accordingly even if the requested region does
not match exactly but still fits into.

This new interface is intended for memory hot-delete.  During bootup,
memory resources are inserted from the boot descriptor table, such as
EFI Memory Table and e820.  Each memory resource entry usually covers
the whole contigous memory range.  Memory hot-delete request, on the
other hand, may target to a particular range of memory resource, and its
size can be much smaller than the whole contiguous memory.  Since the
existing release interfaces like __release_region() require a requested
region to be exactly matched to a resource entry, they do not allow a
partial resource to be released.

This new interface is restrictive (i.e.  release under certain
conditions), which is consistent with other release interfaces,
__release_region() and __release_resource().  Additional release
conditions, such as an overlapping region to a resource entry, can be
supported after they are confirmed as valid cases.

There is no change to the existing interfaces since their restriction is
valid for I/O resources.

[akpm@linux-foundation.org: use GFP_ATOMIC under write_lock()]
[akpm@linux-foundation.org: switch back to GFP_KERNEL, less buggily]
[akpm@linux-foundation.org: remove unneeded and wrong kfree(), per Toshi]
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Reviewed-by : Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: NRam Pai <linuxram@us.ibm.com>
Cc: T Makphaibulchoke <tmac@hp.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add __adjust_resource(), which is called by adjust_resource() internally
after the resource_lock is held.  There is no interface change to
adjust_resource().  This change allows other functions to call
__adjust_resource() internally while the resource_lock is held.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: T Makphaibulchoke <tmac@hp.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The comment over migrate_pages() looks quite weird, and makes it hard to
grasp what it is trying to say.  Rewrite it more comprehensibly.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the memory barrier in __do_huge_pmd_anonymous_page doesn't
work.  Because lru_cache_add_lru uses pagevec so it could miss spinlock
easily so above rule was broken so user might see inconsistent data.

I was not first person who pointed out the problem.  Mel and Peter
pointed out a few months ago and Peter pointed out further that even
spin_lock/unlock can't make sure of it:

  http://marc.info/?t=134333512700004

	In particular:

        	*A = a;
        	LOCK
        	UNLOCK
        	*B = b;

	may occur as:

        	LOCK, STORE *B, STORE *A, UNLOCK

At last, Hugh pointed out that even we don't need memory barrier in
there because __SetPageUpdate already have done it from Nick's commit
0ed361de ("mm: fix PageUptodate data race") explicitly.

So this patch fixes comment on THP and adds same comment for
do_anonymous_page, too because everybody except Hugh was missing that.
It means we need a comment about that.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_HOTPLUG is going away as an option, cleanup CONFIG_HOTPLUG
ifdefs in mm files.
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Just a trivial issue I stumbled on while doing something else...
Signed-off-by: NMichel Lespinasse <walken@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Alter the admin and user reserves of the previous patches in this series
when memory is added or removed.

If memory is added and the reserves have been eliminated or increased
above the default max, then we'll trust the admin.

If memory is removed and there isn't enough free memory, then we need to
reset the reserves.

Otherwise keep the reserve set by the admin.

The reserve reset code is the same as the reserve initialization code.

I tested hot addition and removal by triggering it via sysfs.  The
reserves shrunk when they were set high and memory was removed.  They
were reset higher when memory was added again.

[akpm@linux-foundation.org: use register_hotmemory_notifier()]
[akpm@linux-foundation.org: init_user_reserve() and init_admin_reserve can no longer be __meminit]
[fengguang.wu@intel.com: make init_reserve_notifier() static]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NAndrew Shewmaker <agshew@gmail.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an admin_reserve_kbytes knob to allow admins to change the hardcoded
memory reserve to something other than 3%, which may be multiple
gigabytes on large memory systems.  Only about 8MB is necessary to
enable recovery in the default mode, and only a few hundred MB are
required even when overcommit is disabled.

This affects OVERCOMMIT_GUESS and OVERCOMMIT_NEVER.

admin_reserve_kbytes is initialized to min(3% free pages, 8MB)

I arrived at 8MB by summing the RSS of sshd or login, bash, and top.

Please see first patch in this series for full background, motivation,
testing, and full changelog.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make init_admin_reserve() static]
Signed-off-by: NAndrew Shewmaker <agshew@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add user_reserve_kbytes knob.

Limit the growth of the memory reserved for other user processes to
min(3% current process size, user_reserve_pages).  Only about 8MB is
necessary to enable recovery in the default mode, and only a few hundred
MB are required even when overcommit is disabled.

user_reserve_pages defaults to min(3% free pages, 128MB)

I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ...
then adding the RSS of each.

This only affects OVERCOMMIT_NEVER mode.

Background

1. user reserve

__vm_enough_memory reserves a hardcoded 3% of the current process size for
other applications when overcommit is disabled.  This was done so that a
user could recover if they launched a memory hogging process.  Without the
reserve, a user would easily run into a message such as:

bash: fork: Cannot allocate memory

2. admin reserve

Additionally, a hardcoded 3% of free memory is reserved for root in both
overcommit 'guess' and 'never' modes.  This was intended to prevent a
scenario where root-cant-log-in and perform recovery operations.

Note that this reserve shrinks, and doesn't guarantee a useful reserve.

Motivation

The two hardcoded memory reserves should be updated to account for current
memory sizes.

Also, the admin reserve would be more useful if it didn't shrink too much.

When the current code was originally written, 1GB was considered
"enterprise".  Now the 3% reserve can grow to multiple GB on large memory
systems, and it only needs to be a few hundred MB at most to enable a user
or admin to recover a system with an unwanted memory hogging process.

I've found that reducing these reserves is especially beneficial for a
specific type of application load:

 * single application system
 * one or few processes (e.g. one per core)
 * allocating all available memory
 * not initializing every page immediately
 * long running

I've run scientific clusters with this sort of load.  A long running job
sometimes failed many hours (weeks of CPU time) into a calculation.  They
weren't initializing all of their memory immediately, and they weren't
using calloc, so I put systems into overcommit 'never' mode.  These
clusters run diskless and have no swap.

However, with the current reserves, a user wishing to allocate as much
memory as possible to one process may be prevented from using, for
example, almost 2GB out of 32GB.

The effect is less, but still significant when a user starts a job with
one process per core.  I have repeatedly seen a set of processes
requesting the same amount of memory fail because one of them could not
allocate the amount of memory a user would expect to be able to allocate.
For example, Message Passing Interfce (MPI) processes, one per core.  And
it is similar for other parallel programming frameworks.

Changing this reserve code will make the overcommit never mode more useful
by allowing applications to allocate nearly all of the available memory.

Also, the new admin_reserve_kbytes will be safer than the current behavior
since the hardcoded 3% of available memory reserve can shrink to something
useless in the case where applications have grabbed all available memory.

Risks

* "bash: fork: Cannot allocate memory"

  The downside of the first patch-- which creates a tunable user reserve
  that is only used in overcommit 'never' mode--is that an admin can set
  it so low that a user may not be able to kill their process, even if
  they already have a shell prompt.

  Of course, a user can get in the same predicament with the current 3%
  reserve--they just have to launch processes until 3% becomes negligible.

* root-cant-log-in problem

  The second patch, adding the tunable rootuser_reserve_pages, allows
  the admin to shoot themselves in the foot by setting it too small.  They
  can easily get the system into a state where root-can't-log-in.

  However, the new admin_reserve_kbytes will be safer than the current
  behavior since the hardcoded 3% of available memory reserve can shrink
  to something useless in the case where applications have grabbed all
  available memory.

Alternatives

 * Memory cgroups provide a more flexible way to limit application memory.

   Not everyone wants to set up cgroups or deal with their overhead.

 * We could create a fourth overcommit mode which provides smaller reserves.

   The size of useful reserves may be drastically different depending
   on the whether the system is embedded or enterprise.

 * Force users to initialize all of their memory or use calloc.

   Some users don't want/expect the system to overcommit when they malloc.
   Overcommit 'never' mode is for this scenario, and it should work well.

The new user and admin reserve tunables are simple to use, with low
overhead compared to cgroups.  The patches preserve current behavior where
3% of memory is less than 128MB, except that the admin reserve doesn't
shrink to an unusable size under pressure.  The code allows admins to tune
for embedded and enterprise usage.

FAQ

 * How is the root-cant-login problem addressed?
   What happens if admin_reserve_pages is set to 0?

   Root is free to shoot themselves in the foot by setting
   admin_reserve_kbytes too low.

   On x86_64, the minimum useful reserve is:
     8MB for overcommit 'guess'
   128MB for overcommit 'never'

   admin_reserve_pages defaults to min(3% free memory, 8MB)

   So, anyone switching to 'never' mode needs to adjust
   admin_reserve_pages.

 * How do you calculate a minimum useful reserve?

   A user or the admin needs enough memory to login and perform
   recovery operations, which includes, at a minimum:

   sshd or login + bash (or some other shell) + top (or ps, kill, etc.)

   For overcommit 'guess', we can sum resident set sizes (RSS)
   because we only need enough memory to handle what the recovery
   programs will typically use. On x86_64 this is about 8MB.

   For overcommit 'never', we can take the max of their virtual sizes (VSZ)
   and add the sum of their RSS. We use VSZ instead of RSS because mode
   forces us to ensure we can fulfill all of the requested memory allocations--
   even if the programs only use a fraction of what they ask for.
   On x86_64 this is about 128MB.

   When swap is enabled, reserves are useful even when they are as
   small as 10MB, regardless of overcommit mode.

   When both swap and overcommit are disabled, then the admin should
   tune the reserves higher to be absolutley safe. Over 230MB each
   was safest in my testing.

 * What happens if user_reserve_pages is set to 0?

   Note, this only affects overcomitt 'never' mode.

   Then a user will be able to allocate all available memory minus
   admin_reserve_kbytes.

   However, they will easily see a message such as:

   "bash: fork: Cannot allocate memory"

   And they won't be able to recover/kill their application.
   The admin should be able to recover the system if
   admin_reserve_kbytes is set appropriately.

 * What's the difference between overcommit 'guess' and 'never'?

   "Guess" allows an allocation if there are enough free + reclaimable
   pages. It has a hardcoded 3% of free pages reserved for root.

   "Never" allows an allocation if there is enough swap + a configurable
   percentage (default is 50) of physical RAM. It has a hardcoded 3% of
   free pages reserved for root, like "Guess" mode. It also has a
   hardcoded 3% of the current process size reserved for additional
   applications.

 * Why is overcommit 'guess' not suitable even when an app eventually
   writes to every page? It takes free pages, file pages, available
   swap pages, reclaimable slab pages into consideration. In other words,
   these are all pages available, then why isn't overcommit suitable?

   Because it only looks at the present state of the system. It
   does not take into account the memory that other applications have
   malloced, but haven't initialized yet. It overcommits the system.

Test Summary

There was little change in behavior in the default overcommit 'guess'
mode with swap enabled before and after the patch. This was expected.

Systems run most predictably (i.e. no oom kills) in overcommit 'never'
mode with swap enabled. This also allowed the most memory to be allocated
to a user application.

Overcommit 'guess' mode without swap is a bad idea. It is easy to
crash the system. None of the other tested combinations crashed.
This matches my experience on the Roadrunner supercomputer.

Without the tunable user reserve, a system in overcommit 'never' mode
and without swap does not allow the admin to recover, although the
admin can.

With the new tunable reserves, a system in overcommit 'never' mode
and without swap can be configured to:

1. maximize user-allocatable memory, running close to the edge of
recoverability

2. maximize recoverability, sacrificing allocatable memory to
ensure that a user cannot take down a system

Test Description

Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap

System is booted into multiuser console mode, with unnecessary services
turned off. Caches were dropped before each test.

Hogs are user memtester processes that attempt to allocate all free memory
as reported by /proc/meminfo

In overcommit 'never' mode, memory_ratio=100

Test Results

3.9.0-rc1-mm1

Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
----------   ----   ----   -------------   ----   -------------   --------------
guess        yes    1      5432/5432       no     yes             yes
guess        yes    4      5444/5444       1      yes             yes
guess        no     1      5302/5449       no     yes             yes
guess        no     4      -               crash  no              no

never        yes    1      5460/5460       1      yes             yes
never        yes    4      5460/5460       1      yes             yes
never        no     1      5218/5432       no     no              yes
never        no     4      5203/5448       no     no              yes

3.9.0-rc1-mm1-tunablereserves

User and Admin Recovery show their respective reserves, if applicable.

Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
----------   ----   ----   -------------   ----   -------------   --------------
guess        yes    1      5419/5419       no     - yes           8MB yes
guess        yes    4      5436/5436       1      - yes           8MB yes
guess        no     1      5440/5440       *      - yes           8MB yes
guess        no     4      -               crash  - no            8MB no

* process would successfully mlock, then the oom killer would pick it

never        yes    1      5446/5446       no     10MB yes        20MB yes
never        yes    4      5456/5456       no     10MB yes        20MB yes
never        no     1      5387/5429       no     128MB no        8MB barely
never        no     1      5323/5428       no     226MB barely    8MB barely
never        no     1      5323/5428       no     226MB barely    8MB barely

never        no     1      5359/5448       no     10MB no         10MB barely

never        no     1      5323/5428       no     0MB no          10MB barely
never        no     1      5332/5428       no     0MB no          50MB yes
never        no     1      5293/5429       no     0MB no          90MB yes

never        no     1      5001/5427       no     230MB yes       338MB yes
never        no     4*     4998/5424       no     230MB yes       338MB yes

* more memtesters were launched, able to allocate approximately another 100MB

Future Work

 - Test larger memory systems.

 - Test an embedded image.

 - Test other architectures.

 - Time malloc microbenchmarks.

 - Would it be useful to be able to set overcommit policy for
   each memory cgroup?

 - Some lines are slightly above 80 chars.
   Perhaps define a macro to convert between pages and kb?
   Other places in the kernel do this.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make init_user_reserve() static]
Signed-off-by: NAndrew Shewmaker <agshew@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the new interface, remove one ifdef.  No code size changes.

We could/should have been using __meminit/__meminitdata here but there's
now no point in doing that because all this code is elided at compile time.

Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Saves an ifdef, no code size changes
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Squishes a warning which my change to hotplug_memory_notifier() added.

I want to keep that warning, because it is punishment for failnig to check
the hotplug_memory_notifier() return value.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Squishes a statement-with-no-effect warning, removes some ifdefs and
shrinks .text by 2 bytes.

Note that this code fails to check for blocking_notifier_chain_register()
failures.

Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Squishes a statement-with-no-effect warning, removes some ifdefs and
shrinks .text by one byte!

Note that this code fails to check for blocking_notifier_chain_register()
failures.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When CONFIG_MEMORY_HOTPLUG=n, we don't want the memory-hotplug notifier
handlers to be included in the .o files, for space reasons.

The existing hotplug_memory_notifier() tries to handle this but testing
with gcc-4.4.4 shows that it doesn't work - the hotplug functions are
still present in the .o files.

So implement a new register_hotmemory_notifier() which is a copy of
register_hotcpu_notifier(), and which actually works as desired.
hotplug_memory_notifier() and register_memory_notifier() callsites
should be converted to use this new register_hotmemory_notifier().

While we're there, let's repair the existing hotplug_memory_notifier():
it simply stomps on the register_memory_notifier() return value, so
well-behaved code cannot check for errors.  Apparently non of the
existing callers were well-behaved :(

Cc: Andrew Shewmaker <agshew@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

[sfr@canb.auug.org.au: add missing semicolon]
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

powerpc and x86 were opencoding copies of setup_nr_node_ids(), which
page_alloc provides but makes static.  Make it avaliable to the archs in
linux/mm.h.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When booting on a large memory system, the kernel spends considerable
time in memmap_init_zone() setting up memory zones.  Analysis shows
significant time spent in __early_pfn_to_nid().

The routine memmap_init_zone() checks each PFN to verify the nid is
valid.  __early_pfn_to_nid() sequentially scans the list of pfn ranges
to find the right range and returns the nid.  This does not scale well.
On a 4 TB (single rack) system there are 308 memory ranges to scan.  The
higher the PFN the more time spent sequentially spinning through memory
ranges.

Since memmap_init_zone() increments pfn, it will almost always be
looking for the same range as the previous pfn, so check that range
first.  If it is in the same range, return that nid.  If not, scan the
list as before.

A 4 TB (single rack) UV1 system takes 512 seconds to get through the
zone code.  This performance optimization reduces the time by 189
seconds, a 36% improvement.

A 2 TB (single rack) UV2 system goes from 212.7 seconds to 99.8 seconds,
a 112.9 second (53%) reduction.

[akpm@linux-foundation.org: make the statics __meminitdata]
[akpm@linux-foundation.org: fix comment formatting]
[akpm@linux-foundation.org: fix ia64, per yinghai]
[akpm@linux-foundation.org: add missing semicolon, per Tony]
Signed-off-by: NRuss Anderson <rja@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Tested-by: N"Luck, Tony" <tony.luck@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following problem was reported against a distribution kernel when
zone_reclaim was enabled but the same problem applies to the mainline
kernel.  The reproduction case was as follows

1. Run numactl -m +0 dd if=largefile of=/dev/null
   This allocates a large number of clean pages in node 0

2. numactl -N +0 memhog 0.5*Mg
   This start a memory-using application in node 0.

The expected behaviour is that the clean pages get reclaimed and the
application uses node 0 for its memory.  The observed behaviour was that
the memory for the memhog application was allocated off-node since
commits cd38b115 ("mm: page allocator: initialise ZLC for first zone
eligible for zone_reclaim") and commit 76d3fbf8 ("mm: page
allocator: reconsider zones for allocation after direct reclaim").

The assumption of those patches was that it was always preferable to
allocate quickly than stall for long periods of time and they were meant
to take care that the zone was only marked full when necessary but an
important case was missed.

In the allocator fast path, only the low watermarks are checked.  If the
zones free pages are between the low and min watermark then allocations
from the allocators slow path will succeed.  However, zone_reclaim will
only reclaim SWAP_CLUSTER_MAX or 1<<order pages.  There is no guarantee
that this will meet the low watermark causing the zone to be marked full
prematurely.

This patch will only mark the zone full after zone_reclaim if it the min
watermarks are checked or if page reclaim failed to make sufficient
progress.

[mhocko@suse.cz: fix alloc_flags test]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reported-by: NHedi Berriche <hedi@sgi.com>
Tested-by: NHedi Berriche <hedi@sgi.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory hotplug can happen on a machine under load, memory shortness
and fragmentation, so huge page allocations for the vmemmap are not
guaranteed to succeed.

Try to fall back to regular pages before failing the hotplug event
completely.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We already have generic code to allocate vmemmap with regular pages, use
it.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No need to maintain addr_end and p_end when they are never actually read
anywhere on !pse setups.  Remove the dead code.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The sparse code, when asking the architecture to populate the vmemmap,
specifies the section range as a starting page and a number of pages.

This is an awkward interface, because none of the arch-specific code
actually thinks of the range in terms of 'struct page' units and always
translates it to bytes first.

In addition, later patches mix huge page and regular page backing for
the vmemmap.  For this, they need to call vmemmap_populate_basepages()
on sub-section ranges with PAGE_SIZE and PMD_SIZE in mind.  But these
are not necessarily multiples of the 'struct page' size and so this unit
is too coarse.

Just translate the section range into bytes once in the generic sparse
code, then pass byte ranges down the stack.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NDavid S. Miller <davem@davemloft.net>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Hot-adding memory on x86_64 normally requires huge page allocation.
When this is done to a VM guest, it's usually because the system is
already tight on memory, so the request tends to fail.  Try to avoid
this by adding __GFP_REPEAT to the allocation flags.

Addresses http://bugs.debian.org/699913Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NBernhard Schmidt <Bernhard.Schmidt@lrz.de>
Tested-by: NBernhard Schmidt <Bernhard.Schmidt@lrz.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Particularly in oom conditions, it's troublesome that hugetlb memory is
not displayed.  All other meminfo that is emitted will not add up to
what is expected, and there is no artifact left in the kernel log to
show that a potentially significant amount of memory is actually
allocated as hugepages which are not available to be reclaimed.

Booting with hugepages=8192 on the command line, this memory is now
shown in oom conditions.  For example, with echo m >
/proc/sysrq-trigger:

  Node 0 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB
  Node 1 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB
  Node 2 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB
  Node 3 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using mbind to change the mempolicy to MPOL_BIND on several adjacent
mmapped blocks may result in a reset of the mempolicy to MPOL_DEFAULT in
vma_adjust.

Test code.  Correct result is three lines containing "OK".

#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
#include <numaif.h>
#include <errno.h>

/* gcc mbind_test.c -lnuma -o mbind_test -Wall */
#define MAXNODE 4096

void allocate()
{
	int ret;
	int len;
	int policy = -1;
	unsigned char *p;
	unsigned long mask[MAXNODE] = { 0 };
	unsigned long retmask[MAXNODE] = { 0 };

	len = getpagesize() * 0x2fc00;
	p = mmap(NULL, len, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
		 -1, 0);
	if (p == MAP_FAILED)
		printf("mbind err: %d\n", errno);

	mask[0] = 1;
	ret = mbind(p, len, MPOL_BIND, mask, MAXNODE, 0);
	if (ret < 0)
		printf("mbind err: %d %d\n", ret, errno);
	ret = get_mempolicy(&policy, retmask, MAXNODE, p, MPOL_F_ADDR);
	if (ret < 0)
		printf("get_mempolicy err: %d %d\n", ret, errno);

	if (policy == MPOL_BIND)
		printf("OK\n");
	else
		printf("ERROR: policy is %d\n", policy);
}

int main()
{
	allocate();
	allocate();
	allocate();
	return 0;
}
Signed-off-by: NSteven T Hampson <steven.t.hampson@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ARM processors with LPAE enabled use 3 levels of page tables, with an
entry in the top level (pgd) covering 1GB of virtual space.  Because of
the branch relocation limitations on ARM, the loadable modules are
mapped 16MB below PAGE_OFFSET, making the corresponding 1GB pgd shared
between kernel modules and user space.

If free_pgtables() is called with the default ceiling 0,
free_pgd_range() (and subsequently called functions) also frees the page
table shared between user space and kernel modules (which is normally
handled by the ARM-specific pgd_free() function).  This patch changes
defines the ARM USER_PGTABLES_CEILING to TASK_SIZE when CONFIG_ARM_LPAE
is enabled.

Note that the pgd_free() function already checks the presence of the
shared pmd page allocated by pgd_alloc() and frees it, though with
ceiling 0 this wasn't necessary.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>	[3.3+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On architectures where a pgd entry may be shared between user and kernel
(e.g.  ARM+LPAE), freeing page tables needs a ceiling other than 0.
This patch introduces a generic USER_PGTABLES_CEILING that arch code can
override.  It is the responsibility of the arch code setting the ceiling
to ensure the complete freeing of the page tables (usually in
pgd_free()).

[catalin.marinas@arm.com: commit log; shift_arg_pages(), asm-generic/pgtables.h changes]
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: <stable@vger.kernel.org>	[3.3+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 2d11085e ("memcg: do not create memsw files if swap
accounting is disabled") memsw files are created only if memcg swap
accounting is enabled so it doesn't make any sense to check for it
explicitly in mem_cgroup_read(), mem_cgroup_write() and
mem_cgroup_reset().
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the WARN_ON_ONCE(!mm) check as the comment suggested.  Kernel
code calls find_vma only when it is absolutely sure that the mm_struct
arg to it is non-NULL.
Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: k80c <k80ck80c@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now, vmap_area_list is exported as VMCOREINFO for makedumpfile to get
the start address of vmalloc region (vmalloc_start).  The address which
contains vmalloc_start value is represented as below:

  vmap_area_list.next - OFFSET(vmap_area.list) + OFFSET(vmap_area.va_start)

However, both OFFSET(vmap_area.va_start) and OFFSET(vmap_area.list)
aren't exported as VMCOREINFO.

So this patch exports them externally with small cleanup.

[akpm@linux-foundation.org: vmalloc.h should include list.h for list_head]
Signed-off-by: NAtsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now, there is no need to maintain vmlist after initializing vmalloc.  So
remove related code and data structure.
Signed-off-by: NJoonsoo Kim <js1304@gmail.com>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Although our intention is to unexport internal structure entirely, but
there is one exception for kexec.  kexec dumps address of vmlist and
makedumpfile uses this information.

We are about to remove vmlist, then another way to retrieve information
of vmalloc layer is needed for makedumpfile.  For this purpose, we
export vmap_area_list, instead of vmlist.
Signed-off-by: NJoonsoo Kim <js1304@gmail.com>
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>