- 22 3月, 2012 1 次提交
-
-
由 Matt Fleming 提交于
Use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by: NOleg Nesterov <oleg@redhat.com> Acked-by: N"David S. Miller" <davem@davemloft.net> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 3月, 2012 1 次提交
-
-
由 Cong Wang 提交于
[swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename] Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NCong Wang <amwang@redhat.com>
-
- 14 3月, 2012 1 次提交
-
-
由 David S. Miller 提交于
Newer version of binutils are more strict about specifying the correct options to enable certain classes of instructions. The sparc32 build is done for v7 in order to support sun4c systems which lack hardware integer multiply and divide instructions. So we have to pass -Av8 when building the assembler routines that use these instructions and get patched into the kernel when we find out that we have a v8 capable cpu. Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 3月, 2012 1 次提交
-
-
由 Stephane Eranian 提交于
PERF_SAMPLE_BRANCH_* is disabled for: - SW events (sw counters, tracepoints) - HW breakpoints - ALL but Intel x86 architecture - AMD64 processors Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1328826068-11713-10-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 01 3月, 2012 2 次提交
-
-
由 Thomas Gleixner 提交于
Create a distinction between scheduler related preempt_enable_no_resched() calls and the nearly one hundred other places in the kernel that do not want to reschedule, for one reason or another. This distinction matters for -rt, where the scheduler and the non-scheduler preempt models (and checks) are different. For upstream it's purely documentational. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/n/tip-gs88fvx2mdv5psnzxnv575ke@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Coccinelle based conversion. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 2月, 2012 1 次提交
-
-
由 Grant Likely 提交于
Several architectures define their own empty irq_dispose_mapping(). Since the irq_domain code is centralized now, there is little need to do so. This patch removes them and creates a new empty copy when !CONFIG_IRQ_DOMAIN is selected. The patch also means that IRQ_DOMAIN becomes selectable on all architectures. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jonas Bonn <jonas@southpole.se> Cc: sparclinux@vger.kernel.org Cc: linux@lists.openrisc.net
-
- 24 2月, 2012 2 次提交
-
-
由 Ben Greear 提交于
This is useful for testing RX handling of frames with bad CRCs. Requires driver support to actually put the packet on the wire properly. Signed-off-by: NBen Greear <greearb@candelatech.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ingo Molnar 提交于
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NJason Baron <jbaron@redhat.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.huSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 2月, 2012 1 次提交
-
-
由 Pavel Emelyanov 提交于
This one specifies where to start MSG_PEEK-ing queue data from. When set to negative value means that MSG_PEEK works as ususally -- peeks from the head of the queue always. When some bytes are peeked from queue and the peeking offset is non negative it is moved forward so that the next peek will return next portion of data. When non-peeking recvmsg occurs and the peeking offset is non negative is is moved backward so that the next peek will still peek the proper data (i.e. the one that would have been picked if there were no non peeking recv in between). The offset is set using per-proto opteration to let the protocol handle the locking issues and to check whether the peeking offset feature is supported by the protocol the socket belongs to. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 2月, 2012 1 次提交
-
-
由 David Miller 提交于
Both sparc 32-bit's software divide assembler and MPILIB provide clz_tab[] with identical contents. Break it out into a seperate object file and select it when SPARC32 or MPILIB is set. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 18 1月, 2012 2 次提交
-
-
由 Eric Paris 提交于
Every arch calls: if (unlikely(current->audit_context)) audit_syscall_entry() which requires knowledge about audit (the existance of audit_context) in the arch code. Just do it all in static inline in audit.h so that arch's can remain blissfully ignorant. Signed-off-by: NEric Paris <eparis@redhat.com>
-
由 Eric Paris 提交于
The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
-
- 11 1月, 2012 2 次提交
-
-
由 Matt Fleming 提交于
Unlike other architectures, sparc currently has no SA_NODEFER definition but only the older SA_NOMASK. Since SA_NOMASK is the historical name for SA_NODEFER, add SA_NODEFER and copy what other architectures do by making SA_NOMASK a synonym for SA_NODEFER. Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tkhai Kirill 提交于
SUN4M per-cpu timers have two modes of work. These are timer mode and counter mode. Kernel doesn't write anything to the register, which is connected with mode choice. So, the mode is chosen by bootloader. This patch forces to use timer mode from the kernel and to be independent of bootloader. I had this problem with OpenBIOS. Timers don't tick and kernel fails on QEMU, when it's compiled with SMP support. The patch fixes problem. Signed-off-by: NTkhai Kirill <tkhai@yandex.ru> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 1月, 2012 3 次提交
-
-
由 Bjorn Helgaas 提交于
Convert from pci_scan_bus_parented() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. pci_scan_root_bus() also includes the pci_bus_add_devices() so we don't need to do that separately. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Bjorn Helgaas 提交于
Convert from pci_create_bus() to pci_create_root_bus(). This way the root bus resources are correct immediately. This patch doesn't fix a problem because sparc fixed the resources before scanning the bus, but it makes sparc more consistent with other architectures. v2: fix build error (from sfr) Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Myron Stowe 提交于
This patch converts SPARC's architecture-specific 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow SPARC's 'pcibios_set_master()' implementation to remain architecture-specific after the generic version is introduced and thus, not change current behavior. No functional change. Signed-off-by: NMyron Stowe <myron.stowe@redhat.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 04 1月, 2012 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 31 12月, 2011 1 次提交
-
-
由 Sam Ravnborg 提交于
sun4 is no longer supported and this file is unused. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 12月, 2011 2 次提交
-
-
由 Sam Ravnborg 提交于
Use _AC() in definition of PAGE_SIZE so the same definition can be used in C and assembler. Also use PAGE_SIZE in definition of THREAD_SIZE. This commit kill the following comment: "I have my suspicions... -DaveM" I did not find any clue what this referred to anyway. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
While chasing following warning from kconfig I noticed that the kconfig preemption model symbols were all dependent on sparc64. warning: (PREEMPT && DEBUG_ATOMIC_SLEEP) selects PREEMPT_COUNT which has unmet direct dependencies (SPARC64) >From arch/sparc/Kconfig: if SPARC64 source "kernel/Kconfig.preempt" endif But looking a bit closer I see nothing obvious why sparc32 should not support the various preemption models. Drop the "if SPARC64" conditional to enable selection of preemption model on sparc32 too. Build-tested - but not run-time tested all three models. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 12月, 2011 3 次提交
-
-
由 Sam Ravnborg 提交于
There is no-one that really require atomic64_t support on sparc32. But several drivers fails to build without proper atomic64 support. And for an allyesconfig build for sparc32 this is annoying. Include the generic atomic64_t support for sparc32. This has a text footprint cost: $size vmlinux (before atomic64_t support) text data bss dec hex filename 3578860 134260 108781 3821901 3a514d vmlinux $size vmlinux (after atomic64_t support) text data bss dec hex filename 3579892 130684 108781 3819357 3a475d vmlinux text increase (3579892 - 3578860) = 1032 bytes data decreases - but I fail to explain why! I have rebuild twice to check my numbers. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
arch/sparc/include/asm/atomic_32.h is not exported to userspace. So there is no need to protect code using __KERNEL__. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sam Ravnborg 提交于
atomic24 support was used to semaphores in the past - but is no longer used. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 12月, 2011 1 次提交
-
-
由 David S. Miller 提交于
This silently was working for many years and stopped working on Niagara-T3 machines. We need to set the MSIQ to VALID before we can set it's state to IDLE. On Niagara-T3, setting the state to IDLE first was causing HV_EINVAL errors. The hypervisor documentation says, rather ambiguously, that the MSIQ must be "initialized" before one can set the state. I previously understood this to mean merely that a successful setconf() operation has been performed on the MSIQ, which we have done at this point. But it seems to also mean that it has been set VALID too. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 12月, 2011 1 次提交
-
-
由 Kay Sievers 提交于
This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 15 12月, 2011 1 次提交
-
-
由 David S. Miller 提交于
The "(insn & 0x01800000) != 0x01800000" test matches 'restore' but that is a legitimate place to see the %lo() part of a 32-bit symbol relocation, particularly in tail calls. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NSergei Trofimovich <slyfox@gentoo.org>
-
- 12 12月, 2011 5 次提交
-
-
由 David Howells 提交于
Don't include linux/compat.h in sparc's asm/siginfo.h as it leads to a circular dependency: asm/siginfo.h -> linux/compat.h -> asm/siginfo.h Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: David S. Miller <davem@davemloft.net> cc: sparclinux@vger.kernel.org
-
由 Frederic Weisbecker 提交于
Those two APIs were provided to optimize the calls of tick_nohz_idle_enter() and rcu_idle_enter() into a single irq disabled section. This way no interrupt happening in-between would needlessly process any RCU job. Now we are talking about an optimization for which benefits have yet to be measured. Let's start simple and completely decouple idle rcu and dyntick idle logics to simplify. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: NJosh Triplett <josh@joshtriplett.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Paul E. McKenney 提交于
Change from direct comparison of ->pid with zero to is_idle_task(). Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
由 Frederic Weisbecker 提交于
It is assumed that rcu won't be used once we switch to tickless mode and until we restart the tick. However this is not always true, as in x86-64 where we dereference the idle notifiers after the tick is stopped. To prepare for fixing this, add two new APIs: tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu(). If no use of RCU is made in the idle loop between tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch must instead call the new *_norcu() version such that the arch doesn't need to call rcu_idle_enter() and rcu_idle_exit(). Otherwise the arch must call tick_nohz_enter_idle() and tick_nohz_exit_idle() and also call explicitly: - rcu_idle_enter() after its last use of RCU before the CPU is put to sleep. - rcu_idle_exit() before the first use of RCU after the CPU is woken up. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
-
由 Frederic Weisbecker 提交于
The tick_nohz_stop_sched_tick() function, which tries to delay the next timer tick as long as possible, can be called from two places: - From the idle loop to start the dytick idle mode - From interrupt exit if we have interrupted the dyntick idle mode, so that we reprogram the next tick event in case the irq changed some internal state that requires this action. There are only few minor differences between both that are handled by that function, driven by the ts->inidle cpu variable and the inidle parameter. The whole guarantees that we only update the dyntick mode on irq exit if we actually interrupted the dyntick idle mode, and that we enter in RCU extended quiescent state from idle loop entry only. Split this function into: - tick_nohz_idle_enter(), which sets ts->inidle to 1, enters dynticks idle mode unconditionally if it can, and enters into RCU extended quiescent state. - tick_nohz_irq_exit() which only updates the dynticks idle mode when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called). To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed into tick_nohz_idle_exit(). This simplifies the code and micro-optimize the irq exit path (no need for local_irq_save there). This also prepares for the split between dynticks and rcu extended quiescent state logics. We'll need this split to further fix illegal uses of RCU in extended quiescent states in the idle loop. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: David Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
- 09 12月, 2011 5 次提交
-
-
由 Tejun Heo 提交于
Now all ARCH_POPULATES_NODE_MAP archs select HAVE_MEBLOCK_NODE_MAP - there's no user of early_node_map[] left. Kill early_node_map[] and replace ARCH_POPULATES_NODE_MAP with HAVE_MEMBLOCK_NODE_MAP. Also, relocate for_each_mem_pfn_range() and helper from mm.h to memblock.h as page_alloc.c would no longer host an alternative implementation. This change is ultimately one to one mapping and shouldn't cause any observable difference; however, after the recent changes, there are some functions which now would fit memblock.c better than page_alloc.c and dependency on HAVE_MEMBLOCK_NODE_MAP instead of HAVE_MEMBLOCK doesn't make much sense on some of them. Further cleanups for functions inside HAVE_MEMBLOCK_NODE_MAP in mm.h would be nice. -v2: Fix compile bug introduced by mis-spelling CONFIG_HAVE_MEMBLOCK_NODE_MAP to CONFIG_MEMBLOCK_HAVE_NODE_MAP in mmzone.h. Reported by Stephen Rothwell. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
由 Tejun Heo 提交于
sparc doesn't access early_node_map[] directly and enabling HAVE_MEMBLOCK_NODE_MAP is trivial - replacing add_active_range() calls with memblock_set_node() and selecting HAVE_MEMBLOCK_NODE_MAP is enough. -v2: Use select in Kconfig instead as suggested by Sam Ravnborg. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: N"David S. Miller" <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: sparclinux@vger.kernel.org
-
由 Tejun Heo 提交于
The only function of memblock_analyze() is now allowing resize of memblock region arrays. Rename it to memblock_allow_resize() and update its users. * The following users remain the same other than renaming. arm/mm/init.c::arm_memblock_init() microblaze/kernel/prom.c::early_init_devtree() powerpc/kernel/prom.c::early_init_devtree() openrisc/kernel/prom.c::early_init_devtree() sh/mm/init.c::paging_init() sparc/mm/init_64.c::paging_init() unicore32/mm/init.c::uc32_memblock_init() * In the following users, analyze was used to update total size which is no longer necessary. powerpc/kernel/machine_kexec.c::reserve_crashkernel() powerpc/kernel/prom.c::early_init_devtree() powerpc/mm/init_32.c::MMU_init() powerpc/mm/tlb_nohash.c::__early_init_mmu() powerpc/platforms/ps3/mm.c::ps3_mm_add_memory() powerpc/platforms/embedded6xx/wii.c::wii_memory_fixups() sh/kernel/machine_kexec.c::reserve_crashkernel() * x86/kernel/e820.c::memblock_x86_fill() was directly setting memblock_can_resize before populating memblock and calling analyze afterwards. Call memblock_allow_resize() before start populating. memblock_can_resize is now static inside memblock.c. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
由 Tejun Heo 提交于
memblock_init() initializes arrays for regions and memblock itself; however, all these can be done with struct initializers and memblock_init() can be removed. This patch kills memblock_init() and initializes memblock with struct initializer. The only difference is that the first dummy entries don't have .nid set to MAX_NUMNODES initially. This doesn't cause any behavior difference. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
由 Tejun Heo 提交于
24aa0788 (memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones) removed arch/x86/include/asm/memblock.h and dropped its inclusion from include/linux/memblock.h which breaks other architectures which depended on the generic memblock.h pulling in the arch specific one. However, the proper fix isn't adding back the asm inclusion. memblock doesn't have any arch dependent part and doesn't need arch specific header file and asm/memblock.h files are either practically empty or contain mostly unrelated arch specific stuff. * In microblaze, sh, powerpc, sparc and openrisc, asm/memblock.h is either empty or just contains unused MEMBLOCK_DBG() macro. Remove them. * In arm and unicore32, asm/memblock.h contains arch specific stuff. Include it directly from its users. It might be a good idea to rename the header file to avoid confusion. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: N"H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
-
- 05 12月, 2011 1 次提交
-
-
由 Thomas Meyer 提交于
The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2011 1 次提交
-
-
由 Michael S. Tsirkin 提交于
sparc copied pci_iomap from generic code, probably to avoid pulling the rest of iomap.c in. Since that's in a separate file now, we can reuse the common implementation. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-