- 22 10月, 2007 6 次提交
-
-
由 Keshavamurthy, Anil S 提交于
When we fix all the opensource gfx drivers to use the DMA api's, at that time we can yank this config options out. [jengelh@computergmbh.de: Kconfig fixes] Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Keshavamurthy, Anil S 提交于
MSI interrupt handler registrations and fault handling support for Intel-IOMMU hadrware. This patch enables the MSI interrupts for the DMA remapping units and in the interrupt handler read the fault cause and outputs the same on to the console. Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Keshavamurthy, Anil S 提交于
Actual intel IOMMU driver. Hardware spec can be found at: http://www.intel.com/technology/virtualization This driver sets X86_64 'dma_ops', so hook into standard DMA APIs. In this way, PCI driver will get virtual DMA address. This change is transparent to PCI drivers. [akpm@linux-foundation.org: remove unneeded cast] [akpm@linux-foundation.org: build fix] [bunk@stusta.de: fix duplicate CONFIG_DMAR Makefile line] Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Keshavamurthy, Anil S 提交于
Introduce the size param for clflush_cache_range(). Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
This patch uses the updated boot protocol to do paravirtualized boot. If the boot version is >= 2.07, then it will do two things: 1. Check the bootparams loadflags to see if we should reload the segment registers and clear interrupts. This is appropriate for normal native boot and some paravirtualized environments, but inapproprate for others. 2. Check the hardware architecture, and dispatch to the appropriate kernel entrypoint. If the bootloader doesn't set this, then we simply do the normal boot sequence. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NH. Peter Anvin <hpa@zytor.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
Updates for version 2.07 of the boot protocol. This includes: load_flags.KEEP_SEGMENTS- flag to request/inhibit segment reloads hardware_subarch - what subarchitecture we're booting under hardware_subarch_data - per-architecture data The intention of these changes is to make booting a paravirtualized kernel work via the normal Linux boot protocol. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NH. Peter Anvin <hpa@zytor.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 10月, 2007 34 次提交
-
-
由 Josh Triplett 提交于
Signed-off-by: NJosh Triplett <josh@kernel.org> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Simon Arlott 提交于
Spelling fixes in arch/x86_64/. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Simon Arlott 提交于
Spelling fixes in arch/i386/. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Robert P. J. Day 提交于
a rather obvious fix given the opening of the function: ... static __init int no_ipi_broadcast(char *str) { get_option(&str, &no_broadcast); ... Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Marcin Garski 提交于
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Jan Engelhardt 提交于
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Robert P. J. Day 提交于
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Bernhard Walle 提交于
This patch removes the crashkernel parsing from arch/x86_64/kernel/machine_kexec.c and calls the generic function, introduced in the last patch, in setup_bootmem_allocator(). This is necessary because the amount of System RAM must be known in this function now because of the new syntax. Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bernhard Walle 提交于
This patch removes the crashkernel parsing from arch/i386/kernel/machine_kexec.c and calls the generic function, introduced in the last patch, in setup_bootmem_allocator(). This is necessary because the amount of System RAM must be known in this function now because of the new syntax. Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
One of the easiest things to isolate is the pid printed in kernel log. There was a patch, that made this for arch-independent code, this one makes so for arch/xxx files. It took some time to cross-compile it, but hopefully these are all the printks in arch code. Signed-off-by: NAlexey Dobriyan <adobriyan@openvz.org> Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Serge E. Hallyn 提交于
is_init() is an ambiguous name for the pid==1 check. Split it into is_global_init() and is_container_init(). A cgroup init has it's tsk->pid == 1. A global init also has it's tsk->pid == 1 and it's active pid namespace is the init_pid_ns. But rather than check the active pid namespace, compare the task structure with 'init_pid_ns.child_reaper', which is initialized during boot to the /sbin/init process and never changes. Changelog: 2.6.22-rc4-mm2-pidns1: - Use 'init_pid_ns.child_reaper' to determine if a given task is the global init (/sbin/init) process. This would improve performance and remove dependence on the task_pid(). 2.6.21-mm2-pidns2: - [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc, ppc,avr32}/traps.c for the _exception() call to is_global_init(). This way, we kill only the cgroup if the cgroup's init has a bug rather than force a kernel panic. [akpm@linux-foundation.org: fix comment] [sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c] [bunk@stusta.de: kernel/pid.c: remove unused exports] [sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: NPavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
copy_oldmem_page should not return leaving a page frame from the previous kernel mapped. Signed-off-by: NFernando Luis Vázquez Cao <fernando@oss.ntt.co.jp> Acked-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Travis 提交于
cpu_data is currently an array defined using NR_CPUS. This means that we overallocate since we will rarely really use maximum configured cpus. When NR_CPU count is raised to 4096 the size of cpu_data becomes 3,145,728 bytes. These changes were adopted from the sparc64 (and ia64) code. An additional field was added to cpuinfo_x86 to be a non-ambiguous cpu index. This corresponds to the index into a cpumask_t as well as the per_cpu index. It's used in various places like show_cpuinfo(). cpu_data is defined to be the boot_cpu_data structure for the NON-SMP case. Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NChristoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jan Blunck 提交于
This patch defines frame_pointer() and stack_pointer() similar to the already defined instruction_pointer(). Thus the oprofile code can be written in a more readable fashion. [ tglx: arch/x86 adaptation ] Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Stephane Eranian 提交于
Here is a small patch to change the behavior of the PMU msr allocator to avoid BUG_ON() when the MSR is unknwon. Instead, it now returns ok, which means "I do not manage". The current allocator is not yet managing the full set of PMU registers (e.g., GLOBAL_* on Core 2). [watchdog] do not BUG_ON() in the MSR allocator if MSR is unknown, return ok instead Signed-off-by: NStephane Eranian <eranian@hpl.hp.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Mike Travis 提交于
This is from an earlier message from Christoph Lameter: processor_core.c currently tries to determine the apicid by special casing for IA64 and x86. The desired information is readily available via cpu_physical_id() on IA64, i386 and x86_64. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Additionally, boot_cpu_id needed to be exported to fix compile errors in dma code when !CONFIG_SMP. Signed-off-by: NMike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Mike Travis 提交于
Convert cpu_llc_id from a static array sized by NR_CPUS to a per_cpu variable. This saves sizeof(cpu_llc_id) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. Note there's an additional change of the type of cpu_llc_id from int to u8 for ARCH i386 to correspond with the same type in ARCH x86_64. Signed-off-by: NMike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Mike Travis 提交于
This patch converts the x86_cpu_to_apicid array to be a per cpu variable. This saves sizeof(apicid) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. MP_processor_info() is one of the functions that require access to the x86_cpu_to_apicid array before the per_cpu data area is setup. For this case, a pointer to the __initdata array is initialized in setup_arch() and removed in smp_prepare_cpus() after the per_cpu data area is initialized. A second change is included to change the initial array value of ARCH i386 from 0xff to BAD_APICID to be consistent with ARCH x86_64. Signed-off-by: NMike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Rusty Russell 提交于
This simplifies the io_apic.c __assign_irq_vector() logic and removes the explicit SYSCALL_VECTOR check, and also allows for vectors to be reserved by other mechanisms (ie. lguest). [ tglx: arch/x86 adaptation ] Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
Don't want any lockdep or other fragile machinery to run during oopses. Use raw spinlocks directly for oops locking. Also disables irq flag tracing there. [ tglx: arch/x86 adaptation ] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jan Beulich 提交于
[ tglx: arch/x86 adaptation ] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Akinobu Mita 提交于
Do cpuid_device_create() in CPU_UP_PREPARE instead of CPU_ONLINE. [ tglx: arch/x86 adaptation ] Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Laurent Vivier 提交于
This patch defines the missing function smp_call_function_mask() for x86_64, this is more or less a cut&paste of i386 function. It removes also some duplicate code. This function is needed by KVM to execute a function on some CPUs. AK: Fixed description AK: Moved WARN_ON(irqs_disabled) one level up to not warn in the panic case. [ tglx: arch/x86 adaptation ] Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
This patch provides a new set of functions for managing the descriptor tables that can be used instead of putting the raw assembly in .c files. Remodeling of store_tr() suggested by Frederik Deweerdt. [ tglx: arch/x86 adaptation ] Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Pavel Emelyanov 提交于
Both functions printk the same information, except for CRx and debug registers in the show_registers() one and a bit different manner. So move the common code into one place. This is already done for x86_64, so I think it's worth having the same on i386. This saves 100 bytes of .rodata section :) ... but only 8 from .text :( [ tglx: arch/x86 adaptation ] Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Jan Blunck 提交于
This patch improves oprofile callgraphs for i386/x86_64. The old backtracing code was unable to produce kernel backtraces if the kernel wasn't compiled with framepointers. The code now uses dump_trace(). [ tglx: arch/x86 adaptation ] Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
[ tglx: arch/x86 adaptation ] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
They were already very similar; just use the same file now. [ tglx: arch/x86 adaptation ] Cc: lenb@kernel.org Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Udo A. Steinberg 提交于
ICH3 and ICH4 have undocumented HPET capabilities. This patch enables HPET for platforms based around these ICHs. Tested on various ICH3 and ICH4 platforms. Because HPET is not officially documented for ICH3/4 and may not have been validated by chipset folks, we're on thin ice here. I'd recommend testing this patch in -hrt or -mm for a while and wait for success/failure reports before feeding it upstream. tglx: depends on the force_hpet command line option ! Signed-off-by: NUdo A. Steinberg <us15@os.inf.tu-dresden.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Udo A. Steinberg 提交于
This patch adds quirks to force enable HPET on Via VT8235 and VT8237 chipsets. The datasheet for 8237 documents HPET functionality (although wrongly) whereas HPET is undocumented for 8235. Tested on A7V880 (8237) and K7VT4A+ (8235) boards. tglx: depends on the force_hept commandline option Signed-off-by: NUdo A. Steinberg <us15@os.inf.tu-dresden.de> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
add force_hpet boot option. (this will be useful to make the forced-enable quirks depend on.) Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andi Kleen 提交于
don't zero pad addresses in segfault message. Matches the other trap messages. This leaves some more space for the new file name. [ mingo: arch/x86 adaptation ] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Roland McGrath 提交于
This makes x86-64's ia32 code use the new linux/elfcore-compat.h, reducing some hand-copied duplication. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-