Place an indication that the certificate should use utf8 strings into the
x509.genkey template generated by kernel/Makefile.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Use the same digest type for the autogenerated key signature as for the module
signature so that the hash algorithm is guaranteed to be present in the kernel.

Without this, the X.509 certificate loader may reject the X.509 certificate so
generated because it was self-signed and the signature will be checked against
itself - but this won't work if the digest algorithm must be loaded as a
module.

The symptom is that the key fails to load with the following message emitted
into the kernel log:

	MODSIGN: Problem loading in-kernel X.509 certificate (-65)

the error in brackets being -ENOPKG.  What you should see is something like:

	MODSIGN: Loaded cert 'Magarathea: Glacier signing key: 9588321144239a119d3406d4c4cf1fbae1836fa0'

Note that this doesn't apply to certificates that are not self-signed as we
don't check those currently as they require the parent CA certificate to be
available.
Reported-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Include a PGP keyring containing the public keys required to perform module
verification in the kernel image during build and create a special keyring
during boot which is then populated with keys of crypto type holding the public
keys found in the PGP keyring.

These can be seen by root:

[root@andromeda ~]# cat /proc/keys
07ad4ee0 I-----     1 perm 3f010000     0     0 crypto    modsign.0: RSA 87b9b3bd []
15c7f8c3 I-----     1 perm 1f030000     0     0 keyring   .module_sign: 1/4
...

It is probably worth permitting root to invalidate these keys, resulting in
their removal and preventing further modules from being loaded with that key.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Automatically generate keys for module signing if they're absent so that
allyesconfig doesn't break.  The builder should consider generating their own
key and certificate, however, so that the keys are appropriately named.

The private key for the module signer should be placed in signing_key.priv
(unencrypted!) and the public key in an X.509 certificate as signing_key.x509.

If a transient key is desired for signing the modules, a config file for
'openssl req' can be placed in x509.genkey, looking something like the
following:

	[ req ]
	default_bits = 4096
	distinguished_name = req_distinguished_name
	prompt = no
	x509_extensions = myexts

	[ req_distinguished_name ]
	O = Magarathea
	CN = Glacier signing key
	emailAddress = slartibartfast@magrathea.h2g2

	[ myexts ]
	basicConstraints=critical,CA:FALSE
	keyUsage=digitalSignature
	subjectKeyIdentifier=hash
	authorityKeyIdentifier=hash

The build process will use this to configure:

	openssl req -new -nodes -utf8 -sha1 -days 36500 -batch \
		-x509 -config x509.genkey \
		-outform DER -out signing_key.x509 \
		-keyout signing_key.priv

to generate the key.

Note that it is required that the X.509 certificate have a subjectKeyIdentifier
and an authorityKeyIdentifier.  Without those, the certificate will be
rejected.  These can be used to check the validity of a certificate.

Note that 'make distclean' will remove signing_key.{priv,x509} and x509.genkey,
whether or not they were generated automatically.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We do a very simple search for a particular string appended to the module
(which is cache-hot and about to be SHA'd anyway).  There's both a config
option and a boot parameter which control whether we accept or fail with
unsigned modules and modules that are signed with an unknown key.

If module signing is enabled, the kernel will be tainted if a module is
loaded that is unsigned or has a signature for which we don't have the
key.

(Useful feedback and tweaks by David Howells <dhowells@redhat.com>)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

While doing the checkpoint-restore in the user space one need to determine
whether various kernel objects (like mm_struct-s of file_struct-s) are
shared between tasks and restore this state.

The 2nd step can be solved by using appropriate CLONE_ flags and the
unshare syscall, while there's currently no ways for solving the 1st one.

One of the ways for checking whether two tasks share e.g.  mm_struct is to
provide some mm_struct ID of a task to its proc file, but showing such
info considered to be not that good for security reasons.

Thus after some debates we end up in conclusion that using that named
'comparison' syscall might be the best candidate.  So here is it --
__NR_kcmp.

It takes up to 5 arguments - the pids of the two tasks (which
characteristics should be compared), the comparison type and (in case of
comparison of files) two file descriptors.

Lookups for pids are done in the caller's PID namespace only.

At moment only x86 is supported and tested.

[akpm@linux-foundation.org: fix up selftests, warnings]
[akpm@linux-foundation.org: include errno.h]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: Michal Marek <mmarek@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lglocks and brlocks are currently generated with some complicated macros
in lglock.h.  But there's no reason to not just use common utility
functions and put all the data into a common data structure.

Since there are at least two users it makes sense to share this code in a
library.  This is also easier maintainable than a macro forest.

This will also make it later possible to dynamically allocate lglocks and
also use them in modules (this would both still need some additional, but
now straightforward, code)

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Provide a simple mechanism that allows running code in the (nonatomic)
context of the arbitrary task.

The caller does task_work_add(task, task_work) and this task executes
task_work->func() either from do_notify_resume() or from do_exit().  The
callback can rely on PF_EXITING to detect the latter case.

"struct task_work" can be embedded in another struct, still it has "void
*data" to handle the most common/simple case.

This allows us to kill the ->replacement_session_keyring hack, and
potentially this can have more users.

Performance-wise, this adds 2 "unlikely(!hlist_empty())" checks into
tracehook_notify_resume() and do_exit().  But at the same time we can
remove the "replacement_session_keyring != NULL" checks from
arch/*/signal.c and exit_creds().

Note: task_work_add/task_work_run abuses ->pi_lock.  This is only because
this lock is already used by lookup_pi_state() to synchronize with
do_exit() setting PF_EXITING.  Fortunately the scope of this lock in
task_work.c is really tiny, and the code is unlikely anyway.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Smith <dsmith@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Start a new file, which will hold SMP and CPU hotplug related generic
infrastructure.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20120420124557.035417523@linutronix.de

Consolidate the uprobes code under kernel/events/, where the various
core kernel event handling routines live.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Link: http://lkml.kernel.org/n/tip-biuyhhwohxgbp2vzbap5yr8o@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Add uprobes support to the core kernel, with x86 support.

This commit adds the kernel facilities, the actual uprobes
user-space ABI and perf probe support comes in later commits.

General design:

Uprobes are maintained in an rb-tree indexed by inode and offset
(the offset here is from the start of the mapping). For a unique
(inode, offset) tuple, there can be at most one uprobe in the
rb-tree.

Since the (inode, offset) tuple identifies a unique uprobe, more
than one user may be interested in the same uprobe. This provides
the ability to connect multiple 'consumers' to the same uprobe.

Each consumer defines a handler and a filter (optional). The
'handler' is run every time the uprobe is hit, if it matches the
'filter' criteria.

The first consumer of a uprobe causes the breakpoint to be
inserted at the specified address and subsequent consumers are
appended to this list.  On subsequent probes, the consumer gets
appended to the existing list of consumers. The breakpoint is
removed when the last consumer unregisters. For all other
unregisterations, the consumer is removed from the list of
consumers.

Given a inode, we get a list of the mms that have mapped the
inode. Do the actual registration if mm maps the page where a
probe needs to be inserted/removed.

We use a temporary list to walk through the vmas that map the
inode.

- The number of maps that map the inode, is not known before we
  walk the rmap and keeps changing.
- extending vm_area_struct wasn't recommended, it's a
  size-critical data structure.
- There can be more than one maps of the inode in the same mm.

We add callbacks to the mmap methods to keep an eye on text vmas
that are of interest to uprobes.  When a vma of interest is mapped,
we insert the breakpoint at the right address.

Uprobe works by replacing the instruction at the address defined
by (inode, offset) with the arch specific breakpoint
instruction. We save a copy of the original instruction at the
uprobed address.

This is needed for:

 a. executing the instruction out-of-line (xol).
 b. instruction analysis for any subsequent fixups.
 c. restoring the instruction back when the uprobe is unregistered.

We insert or delete a breakpoint instruction, and this
breakpoint instruction is assumed to be the smallest instruction
available on the platform. For fixed size instruction platforms
this is trivially true, for variable size instruction platforms
the breakpoint instruction is typically the smallest (often a
single byte).

Writing the instruction is done by COWing the page and changing
the instruction during the copy, this even though most platforms
allow atomic writes of the breakpoint instruction. This also
mirrors the behaviour of a ptrace() memory write to a PRIVATE
file map.

The core worker is derived from KSM's replace_page() logic.

In essence, similar to KSM:

 a. allocate a new page and copy over contents of the page that
    has the uprobed vaddr
 b. modify the copy and insert the breakpoint at the required
    address
 c. switch the original page with the copy containing the
    breakpoint
 d. flush page tables.

replace_page() is being replicated here because of some minor
changes in the type of pages and also because Hugh Dickins had
plans to improve replace_page() for KSM specific work.

Instruction analysis on x86 is based on instruction decoder and
determines if an instruction can be probed and determines the
necessary fixups after singlestep.  Instruction analysis is done
at probe insertion time so that we avoid having to repeat the
same analysis every time a probe is hit.

A lot of code here is due to the improvement/suggestions/inputs
from Peter Zijlstra.

Changelog:

(v10):
 - Add code to clear REX.B prefix as suggested by Denys Vlasenko
   and Masami Hiramatsu.

(v9):
 - Use insn_offset_modrm as suggested by Masami Hiramatsu.

(v7):

 Handle comments from Peter Zijlstra:

 - Dont take reference to inode. (expect inode to uprobe_register to be sane).
 - Use PTR_ERR to set the return value.
 - No need to take reference to inode.
 - use PTR_ERR to return error value.
 - register and uprobe_unregister share code.

(v5):

 - Modified del_consumer as per comments from Peter.
 - Drop reference to inode before dropping reference to uprobe.
 - Use i_size_read(inode) instead of inode->i_size.
 - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called.
 - Includes errno.h as recommended by Stephen Rothwell to fix a build issue
   on sparc defconfig
 - Remove restrictions while unregistering.
 - Earlier code leaked inode references under some conditions while
   registering/unregistering.
 - Continue the vma-rmap walk even if the intermediate vma doesnt
   meet the requirements.
 - Validate the vma found by find_vma before inserting/removing the
   breakpoint
 - Call del_consumer under mutex_lock.
 - Use hash locks.
 - Handle mremap.
 - Introduce find_least_offset_node() instead of close match logic in
   find_uprobe
 - Uprobes no more depends on MM_OWNER; No reference to task_structs
   while inserting/removing a probe.
 - Uses read_mapping_page instead of grab_cache_page so that the pages
   have valid content.
 - pass NULL to get_user_pages for the task parameter.
 - call SetPageUptodate on the new page allocated in write_opcode.
 - fix leaking a reference to the new page under certain conditions.
 - Include Instruction Decoder if Uprobes gets defined.
 - Remove const attributes for instruction prefix arrays.
 - Uses mm_context to know if the application is 32 bit.
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Also-written-by: NJim Keniston <jkenisto@us.ibm.com>
Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linux-mm <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com
[ Made various small edits to the commit log ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the core sysctl code from kernel/sysctl.c and kernel/sysctl_check.c
into fs/proc/proc_sysctl.c.

Currently sysctl maintenance is hampered by the sysctl implementation
being split across 3 files with artificial layering between them.
Consolidate the entire sysctl implementation into 1 file so that
it is easier to see what is going on and hopefully allowing for
simpler maintenance.

For functions that are now only used in fs/proc/proc_sysctl.c remove
their declarations from sysctl.h and make them static in fs/proc/proc_sysctl.c
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

After commit 1eb208ae, "PM: Make
CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME)", the
files under kernel/power are not built unless CONFIG_PM_SLEEP or
CONFIG_PM_RUNTIME is set.  In particular, this causes
kernel/power/poweroff.c to be omitted, even though it should be
compiled, because CONFIG_MAGIC_SYSRQ is set.

Fix the problem by causing kernel/power/Makefile to be processed
for CONFIG_PM unset too.
Reported-and-tested-by: NPhil Oester <kernel@linuxace.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

There's too many sched*.[ch] files in kernel/, give them their own
directory.

(No code changed, other than Makefile glue added.)
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since once needs to do something at conferences and fixing compile
warnings doesn't actually require much if any attention I decided
to break up the sched.c #include "*.c" fest.

This further modularizes the scheduler code.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-x0fcd3mnp8f9c99grcpewmhi@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

During some CPU power modes entered during idle, hotplug and
suspend, peripherals located in the CPU power domain, such as
the GIC, localtimers, and VFP, may be powered down.  Add a
notifier chain that allows drivers for those peripherals to
be notified before and after they may be reset.

Notified drivers can include VFP co-processor, interrupt controller
and it's PM extensions, local CPU timers context save/restore which
shouldn't be interrupted. Hence CPU PM event APIs  must be called
with interrupts disabled.
Signed-off-by: NColin Cross <ccross@android.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NKevin Hilman <khilman@ti.com>
Tested-and-Acked-by: NShawn Guo <shawn.guo@linaro.org>
Tested-by: NKevin Hilman <khilman@ti.com>
Tested-by: NVishwanath BS <vishwanath.bs@ti.com>

The PM QoS implementation files are better named
kernel/power/qos.c and include/linux/pm_qos.h.

The PM QoS support is compiled under the CONFIG_PM option.
Signed-off-by: NJean Pihet <j-pihet@ti.com>
Acked-by: Nmarkgross <markgross@thegnar.org>
Reviewed-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

In the course of testing jump labels for use with the CFS
bandwidth controller, Paul Turner, discovered that using jump
labels reduced the branch count and the instruction count, but
did not reduce the cycle count or wall time.

I noticed that having the jump_label.o included in the kernel
but not used in any way still caused this increase in cycle
count and wall time. Thus, I moved jump_label.o in the
kernel/Makefile, thus changing the link order, and presumably
moving it out of hot icache areas. This brought down the cycle
count/time as expected.

In addition to Paul's testing,  I've tested the patch using a
single 'static_branch()' in the getppid() path, and basically
running tight loops of calls to getppid(). Here are my results
for the branch disabled case:

With jump labels turned on (CONFIG_JUMP_LABEL), branch disabled:

 Performance counter stats for 'bash -c /tmp/getppid;true' (50 runs):

     3,969,510,217 instructions             #	   0.864 IPC     ( +-0.000% )
     4,592,334,954 cycles                     ( +-   0.046% )
       751,634,470 branches                   ( +-   0.000% )

        1.722635797  seconds time elapsed   ( +-   0.046% )

Jump labels turned off (CONFIG_JUMP_LABEL not set), branch
disabled:

 Performance counter stats for 'bash -c /tmp/getppid;true' (50 runs):

     4,009,611,846 instructions             #	   0.867 IPC     ( +-0.000% )
     4,622,210,580 cycles                     ( +-   0.012% )
       771,662,904 branches                   ( +-   0.000% )

        1.734341454  seconds time elapsed   ( +-   0.022% )
Signed-off-by: NJason Baron <jbaron@redhat.com>
Cc: rth@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20110805204040.GG2522@redhat.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
Tested-by: NPaul Turner <pjt@google.com>

When IKCONFIG is built-in make oldconfig will cause the kernel to be
relinked even if .config didn't change. This happens because of a
config_data.gz dependency on .config. This patch changes the if_changed
to a filechk so that config_data.h is only rebuilt when the contents
have actually changed.
Signed-off-by: NPeter Foley <pefoley2@verizon.net>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The ns_cgroup is an annoying cgroup at the namespace / cgroup frontier and
leads to some problems:

  * cgroup creation is out-of-control
  * cgroup name can conflict when pids are looping
  * it is not possible to have a single process handling a lot of
    namespaces without falling in a exponential creation time
  * we may want to create a namespace without creating a cgroup

  The ns_cgroup was replaced by a compatibility flag 'clone_children',
  where a newly created cgroup will copy the parent cgroup values.
  The userspace has to manually create a cgroup and add a task to
  the 'tasks' file.

This patch removes the ns_cgroup as suggested in the following thread:

https://lists.linux-foundation.org/pipermail/containers/2009-June/018616.html

The 'cgroup_clone' function is removed because it is no longer used.

This is a userspace-visible change.  Commit 45531757 ("cgroup: notify
ns_cgroup deprecated") (merged into 2.6.27) caused the kernel to emit a
printk warning users that the feature is planned for removal.  Since that
time we have heard from XXX users who were affected by this.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: NSerge E. Hallyn <serge.hallyn@canonical.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jamal Hadi Salim <hadi@cyberus.ca>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPaul Menage <menage@google.com>
Acked-by: NMatt Helsley <matthltc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As part of the events sybsystem unification, relocate hw_breakpoint.c
into its new destination.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

mv kernel/perf_event.c -> kernel/events/core.c. From there, all further
sensible splitting can happen. The idea is that due to perf_event.c
becoming pretty sizable and with the advent of the marriage with ftrace,
splitting functionality into its logical parts should help speeding up
the unification and to manage the complexity of the subsystem.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

crash_dump: export is_kdump_kernel to modules, consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn

The Xen PV drivers in a crashed HVM guest can not connect to the dom0
backend drivers because both frontend and backend drivers are still in
connected state.  To run the connection reset function only in case of a
crashdump, the is_kdump_kernel() function needs to be available for the PV
driver modules.

Consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn into
kernel/crash_dump.c Also export elfcorehdr_addr to make is_kdump_kernel()
usable for modules.

Leave 'elfcorehdr' as early_param().  This changes powerpc from __setup()
to early_param().  It adds an address range check from x86 also on ia64
and powerpc.

[akpm@linux-foundation.org: additional #includes]
[akpm@linux-foundation.org: remove elfcorehdr_addr export]
[akpm@linux-foundation.org: fix for Tejun's mm/nobootmem.c changes]
Signed-off-by: NOlaf Hering <olaf@aepfle.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For arch which needs USE_GENERIC_SMP_HELPERS, it has to select
USE_GENERIC_SMP_HELPERS, rather than leaving a choice to user, since they
don't provide their own implementions.

Also, move on_each_cpu() to kernel/smp.c, it is strange to put it in
kernel/softirq.c.

For arch which doesn't use USE_GENERIC_SMP_HELPERS, e.g.  blackfin, only
on_each_cpu() is compiled.
Signed-off-by: NAmerigo Wang <amwang@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

DEFINE_TRACE should also exist when CONFIG_EVENT_TRACING=n. Otherwise, setting
only TRACEPOINTS=y is broken.
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20101028153117.GA4051@Krystal>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If you try to build a kernel with KCONFIG_CONFIG set (to a value
not equal to .config) and that config sets CONFIG_IKCONFIG then the
build will fail with:

make[1]: *** No rule to make target `.config', needed by \
`kernel/config_data.gz'.  Stop.

because the kernel/Makefile contains a direct reference to .config.

This issue has been present since the introduction of KCONFIG_CONFIG
in 14cdd3c4.
Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca>
CC: Roman Zippel <zippel@linux-m68k.org>
CC: Michal Marek <mmarek@suse.cz>
Reviewed-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Provide a mechanism that allows running code in IRQ context. It is
most useful for NMI code that needs to interact with the rest of the
system -- like wakeup a task to drain buffers.

Perf currently has such a mechanism, so extract that and provide it as
a generic feature, independent of perf so that others may also
benefit.

The IRQ context callback is generated through self-IPIs where
possible, or on architectures like powerpc the decrementer (the
built-in timer facility) is set to generate an interrupt immediately.

Architectures that don't have anything like this get to do with a
callback from the timer tick. These architectures can call
irq_work_run() at the tail of any IRQ handlers that might enqueue such
work (like the perf IRQ handler) to avoid undue latencies in
processing the work.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
[ various fixes ]
Signed-off-by: NHuang Ying <ying.huang@intel.com>
LKML-Reference: <1287036094.7768.291.camel@yhuang-dev>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

base patch to implement 'jump labeling'. Based on a new 'asm goto' inline
assembly gcc mechanism, we can now branch to labels from an 'asm goto'
statment. This allows us to create a 'no-op' fastpath, which can subsequently
be patched with a jump to the slowpath code. This is useful for code which
might be rarely used, but which we'd like to be able to call, if needed.
Tracepoints are the current usecase that these are being implemented for.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJason Baron <jbaron@redhat.com>
LKML-Reference: <ee8b3595967989fdaf84e698dc7447d315ce972a.1284733808.git.jbaron@redhat.com>

[ cleaned up some formating ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

and some functions in e820.c that are not used anymore
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Implement a small-memory-footprint uniprocessor-only implementation of
preemptible RCU.  This implementation uses but a single blocked-tasks
list rather than the combinatorial number used per leaf rcu_node by
TREE_PREEMPT_RCU, which reduces memory consumption and greatly simplifies
processing.  This version also takes advantage of uniprocessor execution
to accelerate grace periods in the case where there are no readers.

The general design is otherwise broadly similar to that of TREE_PREEMPT_RCU.

This implementation is a step towards having RCU implementation driven
off of the SMP and PREEMPT kernel configuration variables, which can
happen once this implementation has accumulated sufficient experience.

Removed ACCESS_ONCE() from __rcu_read_unlock() and added barrier() as
suggested by Steve Rostedt in order to avoid the compiler-reordering
issue noted by Mathieu Desnoyers (http://lkml.org/lkml/2010/8/16/183).

As can be seen below, CONFIG_TINY_PREEMPT_RCU represents almost 5Kbyte
savings compared to CONFIG_TREE_PREEMPT_RCU.  Of course, for non-real-time
workloads, CONFIG_TINY_RCU is even better.

	CONFIG_TREE_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   6170	    825	     28	   7023	   kernel/rcutree.o
				   ----
				   7026    Total

	CONFIG_TINY_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   2081	     81	      8	   2170	   kernel/rcutiny.o
				   ----
				   2183    Total

	CONFIG_TINY_RCU (non-preemptible)

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	    719	     25	      0	    744	   kernel/rcutiny.o
				    ---
				    757    Total
Requested-by: NLoïc Minier <loic.minier@canonical.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Audit watch should depend on CONFIG_AUDIT_SYSCALL and should select
FSNOTIFY.  This splits the spagetti like mixing of audit_watch and
audit_filter code so they can be configured seperately.
Signed-off-by: NEric Paris <eparis@redhat.com>

slow-work doesn't have any user left.  Kill it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid Howells <dhowells@redhat.com>

Move kgdb.c in preparation to separate the gdbstub from the debug
core and exception handling.

CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

The new nmi_watchdog (which uses the perf event subsystem) is very
similar in structure to the softlockup detector.  Using Ingo's
suggestion, I combined the two functionalities into one file:
kernel/watchdog.c.

Now both the nmi_watchdog (or hardlockup detector) and softlockup
detector sit on top of the perf event subsystem, which is run every
60 seconds or so to see if there are any lockups.

To detect hardlockups, cpus not responding to interrupts, I
implemented an hrtimer that runs 5 times for every perf event
overflow event.  If that stops counting on a cpu, then the cpu is
most likely in trouble.

To detect softlockups, tasks not yielding to the scheduler, I used the
previous kthread idea that now gets kicked every time the hrtimer fires.
If the kthread isn't being scheduled neither is anyone else and the
warning is printed to the console.

I tested this on x86_64 and both the softlockup and hardlockup paths
work.

V2:
- cleaned up the Kconfig and softlockup combination
- surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI
- seperated out the softlockup case from perf event subsystem
- re-arranged the enabling/disabling nmi watchdog from proc space
- added cpumasks for hardlockup failure cases
- removed fallback to soft events if no PMU exists for hard events

V3:
- comment cleanups
- drop support for older softlockup code
- per_cpu cleanups
- completely remove software clock base hardlockup detector
- use per_cpu masking on hard/soft lockup detection
- #ifdef cleanups
- rename config option NMI_WATCHDOG to LOCKUP_DETECTOR
- documentation additions

V4:
- documentation fixes
- convert per_cpu to __get_cpu_var
- powerpc compile fixes

V5:
- split apart warn flags for hard and soft lockups

TODO:
- figure out how to make an arch-agnostic clock2cycles call
  (if possible) to feed into perf events as a sample period

[fweisbec: merged conflict patch]
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

When !CONFIG_SMP, cpu_stop functions weren't defined at all which
could lead to build failures if UP code uses cpu_stop facility.  Add
dummy cpu_stop implementation for UP.  The waiting variants execute
the work function directly with preempt disabled and
stop_one_cpu_nowait() schedules a workqueue work.

Makefile and ifdefs around stop_machine implementation are updated to
accomodate CONFIG_SMP && !CONFIG_STOP_MACHINE case.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NIngo Molnar <mingo@elte.hu>

elf_core_dump() and elf_fdpic_core_dump() use #ifdef and the corresponding
macro for hiding _multiline_ logics in functions.  This patch removes
#ifdef and replaces ELF_CORE_EXTRA_* by corresponding functions.  For
architectures not implemeonting ELF_CORE_EXTRA_*, we use weak functions in
order to reduce a range of modification.

This cleanup is for my next patches, but I think this cleanup itself is
worth doing regardless of my firnal purpose.
Signed-off-by: NDaisuke HATAYAMA <d.hatayama@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This makes the range reservation feature available to other
architectures.

-v2: add get_max_mapped, max_pfn_mapped only defined in x86...
     to fix PPC compiling
-v3: according to hpa, add CONFIG_HAVE_EARLY_RES
-v4: fix typo about EARLY_RES in config
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B7B5723.4070009@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

We have almost the same code for mtrr cleanup and amd_bus checkup, and
this code  will also be used in replacing bootmem with early_res,
so try to move them together and reuse it from different parts.

Also rename update_range to subtract_range as that is what the
function is actually doing.

-v2: update comments as Christoph requested
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-4-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

These are the bits that enable the new nmi_watchdog and safely
isolate the old nmi_watchdog.  Only one or the other can run,
not both at the same time.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: gorcunov@gmail.com
Cc: aris@redhat.com
Cc: peterz@infradead.org
LKML-Reference: <1265424425-31562-4-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch introduces an interface to process data objects
in parallel. The parallelized objects return after serialization
in the same order as they were before the parallelization.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>