Implement pvrusb2 driver plumbing to support cropping.  Submitted by a
pvrusb2 user.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The driver includes an internal table specifying additional
information on a per device-type basis.  This works great until
somebody tries to run-time associate another USB ID with the driver.
This change should hopefully allow the driver to fail gracefully under
such a circumstance.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

___swab32 is an internal detail of the implementation.
Acked-by: NMike Isely <isely@pobox.com>
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The Zilog IR chip on HVR-1900 devices is held in reset when the device
initializes.  We have to bring this chip out of reset before LIRC has
any chance of operating the chip.  So do it.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

When switching video standard, ensure that video GOP size remains
appropriately configured.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The cx18 can support transport streams with newer firmwares. Add a TS
capability to the generic cx2341x module.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The driver enforces a "quiet period" on the encoder in certain
situations before attempting to operate it.  This seems to help avoid
video encoding errors / corruption.  The quiet period was 50msec, but
through experimentation it has been observed to improve further if the
interval is increased to 100msec.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This is primarily a cosmetic change to make it easier to change some
of the time constants used in the driver.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The pvrusb2 driver initially sets the tuner to known broadcast frequencies
in the Chicago area, to ease driver testing for the maintainer.

This patch keeps those default frequencies, but allows them to be altered
via modprobe option.  This allows the same ease and convenience for testing
multiple pvrusb2 devices one after another under other conditions and areas.

For instance, the default initial frequency, 175.25 MHz, might not
necessarily be valid on all cable television networks, but usually will be a
valid NTSC broadcast channel.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch makes the following needlessly global code static:
- pvrusb2-devattr.c: struct pvr2_onair_creator_fe_props
- pvrusb2-devattr.c: struct pvr2_onair_usb2_fe_props
- pvrusb2-devattr.c: struct pvr2_73xxx_dvb_props
- pvrusb2-devattr.c: struct pvr2_750xx_dvb_props
- pvrusb2-devattr.c: struct pvr2_751xx_dvb_props
- pvrusb2-hdw.c:pvr2_led_ctrl_hauppauge()
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

In the pvrusb2 driver, different interfaces (e.g. V4L, DVB) have
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch contains the following cleanups:
- make the following needlessly global function static:
  - pvr2_hdw_set_cur_freq()
- #if 0 the following unused global functions:
  - pvr2_hdw_get_state_name()
  - pvr2_hdw_get_debug_info_unlocked()
  - pvr2_hdw_get_debug_info_locked()
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If a disconnect happens before initialization is completed, the
pvrusb2 driver can accidentally touch dangling pointers.  The whole
initialization function must be protected by the big_lock, and once
inside that lock, the initialization function should abort if it is
discovered that a disconnect has already taken place.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Implement timed measurement of encoder operation for the first time it
is run.  This allows the driver to note when the encoder has been run
successfully for at least 1/4 second.  On top of that implement
various bits to ensure that the encoder has been run once before
digital streaming for OnAir devices.  This is done via several core
state machine tweaks.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Some tuners seem to not work in digital mode unless the encoder is
healthy.  Implement a device attribute to represent this flag and
modify the core state machines to enforce this requirement.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The commands to start / stop USB streaming for an analog device are
fairly standard, owing to the fact that all supported devices
apparently started from the same common reference design.  However
with digital mode, the commands seem to vary by vendor.  This change
makes that variance more explicit.  It also cleans up a related
problem for OnAir devices which prevented digital mode from working at
all.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Numerous places in the driver need to issue simple commands to the FX2
microcontroller (e.g. only 1 or 2 bytes, no reply needed).  Previously
each place that did this, had to take lock, set up a central buffer,
and call the function to perform the handshake.  This change puts
these steps into a single spot.  This also has the effect of removing
the need to mess with the control lock from numerous places in the
code.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Implement a mechanism in the pvrusb2 driver for gathering statistics
on the stream buffering, including bytes transferred, buffers handled,
buffers in flight, etc.  This is useful for debugging certain classes
of streaming issues and for determining if the buffer pool size is
generally correct for the driver.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Don't trigger a pathway state change if it's already been triggered
(eliminates some wasted processing and some debug output noise)
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This change significantly rearranges pvr2_context level initialization
and operation:

1. A new kernel thread is set up for management of the context.

2. Destruction of the pvr2_context instance is moved into the kernel
   thread.  No other context is able to remove the instance; doing
   this simplifies lock handling.

3. The callback into pvrusb2-main, which is used to trigger
   initialization of each interface, is now issued from this kernel
   thread.  Previously it had been indirectly issued out of the work
   queue thread in pvr2_hdw, which led to deadlock issues if the
   interface needed to change a control setting (which in turn
   requires dispatch of another work queue entry).

4. Callbacks into the interfaces (via the pvr2_channel structure) are
   now issued strictly from this thread.  The net result of this is
   that such callback functions can now also safely operate driver
   controls without deadlocking the work queue.  (At the moment this
   is not actually a problem, but I'm anticipating issues with this in
   the future).

5. There is no longer any need for anyone to enter / exit the
   pvr2_context structure.  Implementation of the kernel thread here
   allows this all to be internal now, simplifying other logic.

6. A very very longstanding issue involving a mutex deadlock between
   the pvrusb2 driver and v4l should now be solved.  The deadlock
   involved the pvr2_context mutex and a globals-protecting mutex in
   v4l.  During initialization the driver would take the pvr2_context
   mutex first then the v4l2 interface would register with v4l and
   implicitly take the v4l mutex.  Later when v4l would call back into
   the driver, the two mutexes could possibly be taken in the opposite
   order, a situation that can lead to deadlock.  In practice this
   really wasn't an issue unless a v4l app tried to start VERY early
   after the driver appeared.  However it still needed to be solved,
   and with the use of the kernel thread relieving need for
   pvr2_context mutex, the problem should be finally solved.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The pvrusb2 tear-down logic was clearing two timers before stopping
its internal work queue.  That left a tiny window open where the work
queue might run after the timers are stopped, possibly starting them
again.  This could lead to dangling pointers and an oops.  Solution:
Kill the work queue first, then delete the timers.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There is a callback that is issued to into pvr2_context from pvr2_hdw
after initialization is done.  There was a probability that this
callback could get missed.  Fixed.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The pvrusb2 driver has used hardcoded logic to control the LED on the
device.  However this is really Hauppauge-specific behavior.  This
change defines a new device attribute for LED control and sets things
up appropriately for Hauppauge devices.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Most of this originates from Michael Krufky <mkrufky@linuxtv.org>;
these changes move LED control into separate functions.  This is the
first step in new work to make LED control a device-specific attribute.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The encoder is not a part of the pipeline when in digital mode, so
streaming is OK in this case even when the encoder's firmware is not
loaded.  Modify the driver core handling of this scenario to permit
streaming.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This is a major pvrusb2 change.  The driver core has an algorithm that
is used to cleanly sequence the changes needed to enable / disable
video streaming.  The algorithm had originally been written for analog
streaming, but when in digital mode the pipeline is considerably
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Unlike analog control, control of the digital side is not nearly as
uniform among different devices.  So we have to specify the correct
digital control scheme as a new device attribute.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This code is actually part of a larger set from Mike Krufky
<mkrufky@linuxtv.org>, to support ATSC streaming from within the
pvrusb2 driver.  More to come...
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>