Merge tag 'kvm-arm-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next

Changes for KVM for arm/arm64 for 3.18

This includes a bunch of changes:
 - Support read-only memory slots on arm/arm64
 - Various changes to fix Sparse warnings
 - Correctly detect write vs. read Stage-2 faults
 - Various VGIC cleanups and fixes
 - Dynamic VGIC data strcuture sizing
 - Fix SGI set_clear_pend offset bug
 - Fix VTTBR_BADDR Mask
 - Correctly report the FSC on Stage-2 faults

Conflicts:
	virt/kvm/eventfd.c
	[duplicate, different patch where the kvm-arm version broke x86.
	 The kvm tree instead has the right one]

When we catch something that's not a permission fault or a translation
fault, we log the unsupported FSC in the kernel log, but we were masking
off the bottom bits of the FSC which was not very helpful.

Also correctly report the FSC for data and instruction faults rather
than telling people it was a DFCS, which doesn't exist in the ARM ARM.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

The current aarch64 calculation for VTTBR_BADDR_MASK masks only 39 bits
and not all the bits in the PA range. This is clearly a bug that
manifests itself on systems that allocate memory in the higher address
space range.

 [ Modified from Joel's original patch to be based on PHYS_MASK_SHIFT
   instead of a hard-coded value and to move the alignment check of the
   allocation to mmu.c.  Also added a comment explaining why we hardcode
   the IPA range and changed the stage-2 pgd allocation to be based on
   the 40 bit IPA range instead of the maximum possible 48 bit PA range.
   - Christoffer ]
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NJoel Schopp <joel.schopp@amd.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Confusion around -EBUSY and zero (inside a BUG_ON no less).
Reported-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndres Lagar-Cavilla <andreslc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The sgi values calculated in read_set_clear_sgi_pend_reg() and
write_set_clear_sgi_pend_reg() were horribly incorrectly multiplied by 4
with catastrophic results in that subfunctions ended up overwriting
memory not allocated for the expected purpose.

This showed up as bugs in kfree() and the kernel complaining a lot of
you turn on memory debugging.

This addresses: http://marc.info/?l=kvm&m=141164910007868&w=2Reported-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Patch queue for ppc - 2014-09-24

New awesome things in this release:

  - E500: e6500 core support
  - E500: guest and remote debug support
  - Book3S: remote sw breakpoint support
  - Book3S: HV: Minor bugfixes

Alexander Graf (1):
      KVM: PPC: Pass enum to kvmppc_get_last_inst

Bharat Bhushan (8):
      KVM: PPC: BOOKE: allow debug interrupt at "debug level"
      KVM: PPC: BOOKE : Emulate rfdi instruction
      KVM: PPC: BOOKE: Allow guest to change MSR_DE
      KVM: PPC: BOOKE: Clear guest dbsr in userspace exit KVM_EXIT_DEBUG
      KVM: PPC: BOOKE: Guest and hardware visible debug registers are same
      KVM: PPC: BOOKE: Add one reg interface for DBSR
      KVM: PPC: BOOKE: Add one_reg documentation of SPRG9 and DBSR
      KVM: PPC: BOOKE: Emulate debug registers and exception

Madhavan Srinivasan (2):
      powerpc/kvm: support to handle sw breakpoint
      powerpc/kvm: common sw breakpoint instr across ppc

Michael Neuling (1):
      KVM: PPC: Book3S HV: Add register name when loading toc

Mihai Caraman (10):
      powerpc/booke: Restrict SPE exception handlers to e200/e500 cores
      powerpc/booke: Revert SPE/AltiVec common defines for interrupt numbers
      KVM: PPC: Book3E: Increase FPU laziness
      KVM: PPC: Book3e: Add AltiVec support
      KVM: PPC: Make ONE_REG powerpc generic
      KVM: PPC: Move ONE_REG AltiVec support to powerpc
      KVM: PPC: Remove the tasklet used by the hrtimer
      KVM: PPC: Remove shared defines for SPE and AltiVec interrupts
      KVM: PPC: e500mc: Add support for single threaded vcpus on e6500 core
      KVM: PPC: Book3E: Enable e6500 core

Paul Mackerras (2):
      KVM: PPC: Book3S HV: Increase timeout for grabbing secondary threads
      KVM: PPC: Book3S HV: Only accept host PVR value for guest PVR

In order to make the APIC access page migratable, stop pinning it in
memory.

And because the APIC access page is not pinned in memory, we can
remove kvm_arch->apic_access_page.  When we need to write its
physical address into vmcs, we use gfn_to_page() to get its page
struct, which is needed to call page_to_phys(); the page is then
immediately unpinned.
Suggested-by: NGleb Natapov <gleb@kernel.org>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, the APIC access page is pinned by KVM for the entire life
of the guest.  We want to make it migratable in order to make memory
hot-unplug available for machines that run KVM.

This patch prepares to handle this for the case where there is no nested
virtualization, or where the nested guest does not have an APIC page of
its own.  All accesses to kvm->arch.apic_access_page are changed to go
through kvm_vcpu_reload_apic_access_page.

If the APIC access page is invalidated when the host is running, we update
the VMCS in the next guest entry.

If it is invalidated when the guest is running, the MMU notifier will force
an exit, after which we will handle everything as in the previous case.

If it is invalidated when a nested guest is running, the request will update
either the VMCS01 or the VMCS02.  Updating the VMCS01 is done at the
next L2->L1 exit, while updating the VMCS02 is done in prepare_vmcs02.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, the APIC access page is pinned by KVM for the entire life
of the guest.  We want to make it migratable in order to make memory
hot-unplug available for machines that run KVM.

This patch prepares to handle this in generic code, through a new
request bit (that will be set by the MMU notifier) and a new hook
that is called whenever the request bit is processed.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This will be used to let the guest run while the APIC access page is
not pinned.  Because subsequent patches will fill in the function
for x86, place the (still empty) x86 implementation in the x86.c file
instead of adding an inline function in kvm_host.h.
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Different architectures need different requests, and in fact we
will use this function in architecture-specific code later. This
will be outside kvm_main.c, so make it non-static and rename it to
kvm_make_all_cpus_request().
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

1. We were calling clear_flush_young_notify in unmap_one, but we are
within an mmu notifier invalidate range scope. The spte exists no more
(due to range_start) and the accessed bit info has already been
propagated (due to kvm_pfn_set_accessed). Simply call
clear_flush_young.

2. We clear_flush_young on a primary MMU PMD, but this may be mapped
as a collection of PTEs by the secondary MMU (e.g. during log-dirty).
This required expanding the interface of the clear_flush_young mmu
notifier, so a lot of code has been trivially touched.

3. In the absence of shadow_accessed_mask (e.g. EPT A bit), we emulate
the access bit by blowing the spte. This requires proper synchronizing
with MMU notifier consumers, like every other removal of spte's does.
Signed-off-by: NAndres Lagar-Cavilla <andreslc@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Callbacks don't have to do extra computation to learn what the caller
(lvm_handle_hva_range()) knows very well. Useful for
debugging/tracing/printk/future.
Signed-off-by: NAndres Lagar-Cavilla <andreslc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On x86_64, kernel text mappings are mapped read-only with CONFIG_DEBUG_RODATA.
In that case, KVM will fail to patch VMCALL instructions to VMMCALL
as required on AMD processors.

The failure mode is currently a divide-by-zero exception, which obviously
is a KVM bug that has to be fixed.  However, picking the right instruction
between VMCALL and VMMCALL will be faster and will help if you cannot upgrade
the hypervisor.
Reported-by: NChris Webb <chris@arachsys.com>
Tested-by: NChris Webb <chris@arachsys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Avoid open coded calculations for bank MSRs by using well-defined
macros that hide the index of higher bank MSRs.

No semantic changes.
Signed-off-by: NChen Yucong <slaoub@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 346874c9 ("KVM: x86: Fix CR3 reserved bits") removed non-PAE
reserved bits which were not according to Intel SDM.  However, residue was left
in a debug assertion (CR3_NONPAE_RESERVED_BITS).  Remove it.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

vcpu ioctls can hang the calling thread if issued while a vcpu is running.
However, invalid ioctls can happen when userspace tries to probe the kind
of file descriptors (e.g. isatty() calls ioctl(TCGETS)); in that case,
we know the ioctl is going to be rejected as invalid anyway and we can
fail before trying to take the vcpu mutex.

This patch does not change functionality, it just makes invalid ioctls
fail faster.

Cc: stable@vger.kernel.org
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When KVM handles a tdp fault it uses FOLL_NOWAIT. If the guest memory
has been swapped out or is behind a filemap, this will trigger async
readahead and return immediately. The rationale is that KVM will kick
back the guest with an "async page fault" and allow for some other
guest process to take over.

If async PFs are enabled the fault is retried asap from an async
workqueue. If not, it's retried immediately in the same code path. In
either case the retry will not relinquish the mmap semaphore and will
block on the IO. This is a bad thing, as other mmap semaphore users
now stall as a function of swap or filemap latency.

This patch ensures both the regular and async PF path re-enter the
fault allowing for the mmap semaphore to be relinquished in the case
of IO wait.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NAndres Lagar-Cavilla <andreslc@google.com>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

s/drity/dirty and s/vmsc01/vmcs01
Signed-off-by: NTiejun Chen <tiejun.chen@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Guest which sets the PAT CR to invalid value should get a #GP.  Currently, if
vmx supports loading PAT CR during entry, then the value is not checked.  This
patch makes the required check in that case.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In 64-bit mode a #GP should be delivered to the guest "if the code segment
descriptor pointed to by the selector in the 64-bit gate doesn't have the L-bit
set and the D-bit clear." - Intel SDM "Interrupt 13—General Protection
Exception (#GP)".

This patch fixes the behavior of CS loading emulation code. Although the
comment says that segment loading is not supported in long mode, this function
is executed in long mode, so the fix is necassary.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

A one-line wrapper around kvm_make_request is not particularly
useful. Replace kvm_mmu_flush_tlb() with kvm_make_request().
Signed-off-by: NLiang Chen <liangchen.linux@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- we count KVM_REQ_TLB_FLUSH requests, not actual flushes
  (KVM can have multiple requests for one flush)
- flushes from kvm_flush_remote_tlbs aren't counted
- it's easy to make a direct request by mistake

Solve these by postponing the counting to kvm_check_request().
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NLiang Chen <liangchen.linux@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Initilization of L2 guest with -cpu host, on L1 guest with -cpu host
triggers:

(qemu) KVM: entry failed, hardware error 0x7
...
nested_vmx_run: VMCS MSR_{LOAD,STORE} unsupported

Nested VMX MSR load/store support is not sufficient to
allow perf for L2 guest.

Until properly fixed, trap CPUID and disable function 0xA.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit fc3a9157 ("KVM: X86: Don't report L2 emulation failures to
user-space") disabled the reporting of L2 (nested guest) emulation failures to
userspace due to race-condition between a vmexit and the instruction emulator.
The same rational applies also to userspace applications that are permitted by
the guest OS to access MMIO area or perform PIO.

This patch extends the current behavior - of injecting a #UD instead of
reporting it to userspace - also for guest userspace code.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In init_rmode_tss(), there two variables indicating the return
value, r and ret, and it return 0 on error, 1 on success. The function
is only called by vmx_set_tss_addr(), and ret is redundant.

This patch removes the redundant variable, by making init_rmode_tss()
return 0 on success, -errno on failure.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The KVM emulator code assumes that the guest virtual address space (in 64-bit)
is 48-bits wide.  Fail the KVM_SET_CPUID and KVM_SET_CPUID2 ioctl if
userspace tries to create a guest that does not obey this restriction.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

/me got confused between the kernel and QEMU.  In the kernel, you can
only have one module_init function, and it will prevent unloading the
module unless you also have the corresponding module_exit function.

So, commit 80ce1639 (KVM: VFIO: register kvm_device_ops dynamically,
2014-09-02) broke unloading of the kvm module, by adding a module_init
function and no module_exit.

Repair it by making kvm_vfio_ops_init weak, and checking it in
kvm_init.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Alex Williamson <Alex.Williamson@redhat.com>
Fixes: 80ce1639Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit c77dcacb (KVM: Move more code under CONFIG_HAVE_KVM_IRQFD) added
functionality that depends on definitions in ioapic.h when
__KVM_HAVE_IOAPIC is defined.

At the same time, kvm-arm commit 0ba09511 (KVM: EVENTFD: remove inclusion
of irq.h) removed the inclusion of irq.h, an architecture-specific header
that is not present on ARM but which happened to include ioapic.h on x86.

Include ioapic.h directly in eventfd.c if __KVM_HAVE_IOAPIC is defined.
This fixes x86 and lets ARM use eventfd.c.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The kvmppc_get_last_inst function recently received a facelift that allowed
us to pass an enum of the type of instruction we want to read into it rather
than an unreadable boolean.

Unfortunately, not all callers ended up passing the enum. This wasn't really
an issue as "true" and "false" happen to match the two enum values we have,
but it's still hard to read.

Update all callers of kvmppc_get_last_inst() to follow the new calling
convention.
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch extends the use of illegal instruction as software
breakpoint instruction across the ppc platform. Patch extends
booke program interrupt code to support software breakpoint.
Signed-off-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
[agraf: Fix bookehv]
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds kernel side support for software breakpoint.
Design is that, by using an illegal instruction, we trap to hypervisor
via Emulation Assistance interrupt, where we check for the illegal instruction
and accordingly we return to Host or Guest. Patch also adds support for
software breakpoint in PR KVM.
Signed-off-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Now that AltiVec and hardware thread support is in place enable e6500 core.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

ePAPR represents hardware threads as cpu node properties in device tree.
So with existing QEMU, hardware threads are simply exposed as vcpus with
one hardware thread.

The e6500 core shares TLBs between hardware threads. Without tlb write
conditional instruction, the Linux kernel uses per core mechanisms to
protect against duplicate TLB entries.

The guest is unable to detect real siblings threads, so it can't use the
TLB protection mechanism. An alternative solution is to use the hypervisor
to allocate different lpids to guest's vcpus that runs simultaneous on real
siblings threads. On systems with two threads per core this patch halves
the size of the lpid pool that the allocator sees and use two lpids per VM.
Use even numbers to speedup vcpu lpid computation with consecutive lpids
per VM: vm1 will use lpids 2 and 3, vm2 lpids 4 and 5, and so on.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
[agraf: fix spelling]
Signed-off-by: NAlexander Graf <agraf@suse.de>

Since the guest can read the machine's PVR (Processor Version Register)
directly and see the real value, we should disallow userspace from
setting any value for the guest's PVR other than the real host value.
Therefore this makes kvm_arch_vcpu_set_sregs_hv() check the supplied
PVR value and return an error if it is different from the host value,
which has been put into vcpu->arch.pvr at vcpu creation time.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Occasional failures have been seen with split-core mode and migration
where the message "KVM: couldn't grab cpu" appears.  This increases
the length of time that we wait from 1ms to 10ms, which seems to
work around the issue.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

We currently decide at compile-time which of the SPE or AltiVec units to
support exclusively. Guard kernel defines with CONFIG_SPE_POSSIBLE and
CONFIG_PPC_E500MC and remove shared defines.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Powerpc timer implementation is a copycat version of s390. Now that they removed
the tasklet with commit ea74c0ea follow this
optimization.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NBogdan Purcareata <bogdan.purcareata@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch emulates debug registers and debug exception
to support guest using debug resource. This enables running
gdb/kgdb etc in guest.

On BOOKE architecture we cannot share debug resources between QEMU and
guest because:
    When QEMU is using debug resources then debug exception must
    be always enabled. To achieve this we set MSR_DE and also set
    MSRP_DEP so guest cannot change MSR_DE.

    When emulating debug resource for guest we want guest
    to control MSR_DE (enable/disable debug interrupt on need).

    So above mentioned two configuration cannot be supported
    at the same time. So the result is that we cannot share
    debug resources between QEMU and Guest on BOOKE architecture.

In the current design QEMU gets priority over guest, this means that if
QEMU is using debug resources then guest cannot use them and if guest is
using debug resource then QEMU can overwrite them.
Signed-off-by: NBharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Move ONE_REG AltiVec support to powerpc generic layer.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>