- 24 4月, 2010 2 次提交
-
-
由 Jiri Pirko 提交于
Since .size is set properly in "struct pernet_operations l2tp_net_ops", allocating space for "struct l2tp_net" by hand is not correct, even causes memory leakage. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Conflicts: drivers/net/wireless/ath/ath9k/phy.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-debugfs.c
-
- 23 4月, 2010 23 次提交
-
-
由 Tom Herbert 提交于
Add support to bnx2x to extract Toeplitz hash out of the receive descriptor for use in skb->rxhash. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Sky2 status ring must be big enough to handle worst case number of status messages. It was being oversized (to handle dual port cards), and excessive number of tx ring entries were allowed. This patch reduces the footprint and makes sure the value is enough. Later patch to add RSS increases the number of possible Rx status elements. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Scott Feldman 提交于
remove DCB_PROTO_VERSION as we don't do netlink versioning Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 andrew hendry 提交于
Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 andrew hendry 提交于
Change magic numbers to identifiers for X25 interface. Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Acked-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 andrew hendry 提交于
Change magic numbers to identifiers for X25 interface. Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 andrew hendry 提交于
Change magic numbers to identifiers for X25 interface. Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 andrew hendry 提交于
Change magic numbers to identifiers for X25 interface. Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 andrew hendry 提交于
Change magic numbers to identifiers for X25 interface. also minor check patch formatting. Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Acked-by: NKarsten Keil <isdn@linux-pingi.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Hendry 提交于
V2 Feedback from John Hughes. - Add header for userspace implementations such as xot/xoe to use - Use explicit values for interface stability - No changes to driver patches V1 - Use identifiers instead of magic numbers for X25 layer 3 to device interface. - Also fixed checkpatch notes on updated code. [ Add new user header to include/linux/Kbuild -DaveM ] Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
__sk_dst_get() might be called from softirq, with socket lock held. [ 159.026180] include/net/sock.h:1200 invoked rcu_dereference_check() without protection! [ 159.026261] [ 159.026261] other info that might help us debug this: [ 159.026263] [ 159.026425] [ 159.026426] rcu_scheduler_active = 1, debug_locks = 0 [ 159.026552] 2 locks held by swapper/0: [ 159.026609] #0: (&icsk->icsk_retransmit_timer){+.-...}, at: [<ffffffff8104fc15>] run_timer_softirq+0x105/0x350 [ 159.026839] #1: (slock-AF_INET){+.-...}, at: [<ffffffff81392b8f>] tcp_write_timer+0x2f/0x1e0 [ 159.027063] [ 159.027064] stack backtrace: [ 159.027172] Pid: 0, comm: swapper Not tainted 2.6.34-rc5-03707-gde498c89-dirty #36 [ 159.027252] Call Trace: [ 159.027306] <IRQ> [<ffffffff810718ef>] lockdep_rcu_dereference +0xaf/0xc0 [ 159.027411] [<ffffffff8138e4f7>] tcp_current_mss+0xa7/0xb0 [ 159.027537] [<ffffffff8138fa49>] tcp_write_wakeup+0x89/0x190 [ 159.027600] [<ffffffff81391936>] tcp_send_probe0+0x16/0x100 [ 159.027726] [<ffffffff81392cd9>] tcp_write_timer+0x179/0x1e0 [ 159.027790] [<ffffffff8104fca1>] run_timer_softirq+0x191/0x350 [ 159.027980] [<ffffffff810477ed>] __do_softirq+0xcd/0x200 Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul LeoNerd Evans 提交于
Add an SKF_AD_HATYPE field to the packet ancilliary data area, giving access to skb->dev->type, as reported in the sll_hatype field. When capturing packets on a PF_PACKET/SOCK_RAW socket bound to all interfaces, there doesn't appear to be a way for the filter program to actually find out the underlying hardware type the packet was captured on. This patch adds such ability. This patch also handles the case where skb->dev can be NULL, such as on netlink sockets. Signed-off-by: NPaul Evans <leonerd@leonerd.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Account for TSO segments of an skb in TCP_MIB_OUTSEGS counter. Without doing this, the counter can be off by orders of magnitude from the actual number of segments sent. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Update version to indicate IDC(fw recovery) changes. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
We do netif_device_attach, even if resource allocation fails. Driver callbacks can be called, if device is attached. All these callbacks need to be protected by ADAPTER_UP_MAGIC check. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Rcv producer value should be read in spin-lock. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Driver should not go ahead with fw recovery if fails to acquire semaphore. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Defining macro to set and clear driver state. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Now any pci-func can start fw, whoever sees the reset ack first. Before this, pci-func which sets the RESET state has the responsibility to start fw. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Different class of drivers co-exist for CNA device, there is some minimal interaction that will be required amongst the drivers for performing some device level operations. All the driver should follow inter driver coexistence document. Fixing polling interval and spelling mistake. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Added additional driver statistics to track errors in rcv/tx path. Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This patch adds IPv6 support for RFC5082 Generalized TTL Security Mechanism. Not to users of mapped address; the IPV6 and IPV4 socket options are seperate. The server does have to deal with both IPv4 and IPv6 socket options and the client has to handle the different for each family. On client: int ttl = 255; getaddrinfo(argv[1], argv[2], &hint, &result); for (rp = result; rp != NULL; rp = rp->ai_next) { s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol); if (s < 0) continue; if (rp->ai_family == AF_INET) { setsockopt(s, IPPROTO_IP, IP_TTL, &ttl, sizeof(ttl)); } else if (rp->ai_family == AF_INET6) { setsockopt(s, IPPROTO_IPV6, IPV6_UNICAST_HOPS, &ttl, sizeof(ttl))) } if (connect(s, rp->ai_addr, rp->ai_addrlen) == 0) { ... On server: int minttl = 255 - maxhops; getaddrinfo(NULL, port, &hints, &result); for (rp = result; rp != NULL; rp = rp->ai_next) { s = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol); if (s < 0) continue; if (rp->ai_family == AF_INET6) setsockopt(s, IPPROTO_IPV6, IPV6_MINHOPCOUNT, &minttl, sizeof(minttl)); setsockopt(s, IPPROTO_IP, IP_MINTTL, &minttl, sizeof(minttl)); if (bind(s, rp->ai_addr, rp->ai_addrlen) == 0) break ... Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2010 15 次提交
-
-
由 David S. Miller 提交于
This way GSO packets don't get handled differently. With help from Eric Dumazet. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
-
由 Eric Dumazet 提交于
If some skb are queued to our backlog, we are delaying IPI sending at the end of net_rx_action(), increasing latencies. This defeats the queueing, since we want to quickly dispatch packets to the pool of worker cpus, then eventually deeply process our packets. It's better to send IPI before processing our packets in upper layers, from process_backlog(). Change the _and_disable_irq suffix to _and_enable_irq(), since we enable local irq in net_rps_action(), sorry for the confusion. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
Also put t4_write_indirect() inside "#if 0" to avoid a "defined but not used" compile warning. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
Use the correct direction of byte-swapping function to fix a mistake shown by sparse endianness checking -- c.fl0id is __be16. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Acked-by: NDimitris Michailidis <dm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
Eric's recent patch added __force, but this place would seem to require actually doing a byte order conversion so the printk is consistent across architectures. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
At this point, skb->destructor is not the original one (stored in DEV_GSO_CB(skb)->destructor) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Klein 提交于
Force serialization of userspace-triggered DLPAR/mem operations Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Klein 提交于
Reset a port's resources only if they're actually in an error state Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Röjfors 提交于
This patch adds platform data to the ks8842 driver. Via the platform data a MAC address, to be used by the controller, can be passed. To ensure this MAC address is used, the MAC address is written after each hardware reset. Signed-off-by: NRichard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikanth Karthikesan 提交于
Remove the always true #if 1. Also the unecessary re-test of ei_local->irqlock and the unreachable printk format string. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
kill_fasync() uses a central rwlock, candidate for RCU conversion, to avoid cache line ping pongs on SMP. fasync_remove_entry() and fasync_add_entry() can disable IRQS on a short section instead during whole list scan. Use a spinlock per fasync_struct to synchronize kill_fasync_rcu() and fasync_{remove|add}_entry(). This spinlock is IRQ safe, so sock_fasync() doesnt need its own implementation and can use fasync_helper(), to reduce code size and complexity. We can remove __kill_fasync() direct use in net/socket.c, and rename it to kill_fasync_rcu(). Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Otherwise we only get the checksum right for data-less TCP responses. Noticed by Herbert Xu. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
When I updated this from the corresponding userspace library, an annotation error crept in -- this variable needs to be annotated as little endian. No effect on code generation. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This makes ar5416Addac_9160 and ar5416Addac_9160 const I guess we skipped them long ago. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-