- 06 3月, 2013 19 次提交
-
-
由 Hans Verkuil 提交于
Note that the current driver does not implement enumaudio (so apps cannot tell that audio inputs are present), it does not set V4L2_CAP_AUDIO, nor does it set audioset when calling ENUM_INPUT. And G_AUDIO doesn't set the stereo flag either. So these g/s_audio ioctls are quite pointless and misleading. Especially since some surveillance boards do not have audio at all. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Just opening the radio tuner should not cause a switch to the radio tuner. Only after calling g/s_tuner or g/s_frequency should this happen. This prevents audio being unmuted as soon as the driver is loaded because some process opens /dev/radioX just to see what sort of node it is, which switches on the radio tuner and unmutes audio. This code can be improved further by actually keeping track of who owns the tuner and returning -EBUSY if switching tuner modes will cause problems. But for now just fix the annoying case where on boot the radio turns on automatically. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
try_fmt_vid_overlay should map incorrect sizes and fields to valid values. It also expects that an initial overlay size is defined so g_fmt_vid_overlay returns valid information. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The capability field of v4l2_tuner should be ORed by the various subdevs and by the main driver. In this case the stereo capability was dropped. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Probe for additional tvaudio devices, and allow tvaudio+tda7432 to co-exist. My STB TV PCI FM bttv card has a tda7432, a tda9850 and a tea6420 and with this patch it finally works again (probably for the first time in many years). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The 'current_norm' field cannot be used if multiple device nodes (video and vbi in this case) set the same std. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Replace the - incorrect - manual priority handling with the core priority implementation. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Note that the private chroma agc control has been replaced with the standard CHROMA_AGC control. Also fixes a mute/automute problem where closing the file handle would force mute on. That's not what you want since that would make the mute state out of sync with the mute control. Instead check against the user count. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
- don't return -EINVAL for invalid field types, handle those as if it was FIELD_ANY. - the handling of FIELD_SEQ_BT/TB was wrong as well: if such field formats aren't supported, then fall back to FIELD_ANY instead of returning an error. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Set an initial frequencies when the driver is loaded. That way G_FREQUENCY will give a frequency that corresponds with reality. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
If no tuner is present, then disable the tuner and frequency ioctls. We can remove a number of checks from those ioctls testing for the presence of a tuner. Also remove some tuner type checks (now done by the core) and fix an error return when the prio check fails. Finally some 'unlikely' statements are removed since those only make sense in tightly often executed loops, otherwise they just clutter up the code. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
- Fix ENUM_INPUT audioset. - Fix incorrect input check in s_input. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
VIDIOC_DBG_G_CHIP_IDENT is a prerequisite for the G/S_REGISTER ioctls. In addition, add support to call G/S_REGISTER for supporting i2c devices. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The querycap ioctl didn't support V4L2_CAP_DEVICE_CAPS and the radio device implemented audio and video inputs and s_std, which are not part of the radio API. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 05 3月, 2013 21 次提交
-
-
由 Hans Verkuil 提交于
Remove two maintainers: telegent.com no longer exists, so those email addresses are invalid as well. Added myself as co-maintainer and change the status to 'Odd Fixes'. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
ioctl debugging can now be done through the debug parameter in sysfs. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Due to a poor administration of the driver state it wasn't possible to open a video or vbi device multiple times. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The usual set of problems: the frequency isn't clamped to the frequency range, no tuner index check and the frequency isn't initialized properly on module load. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This switch to v4l2_fh resolves the last v4l2_compliance issues with respect to control events and priority handling. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The input and audio ioctls are only valid for video/vbi nodes. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The driver already does locking, so it is safe to switch to unlocked_ioctl. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This driver now passes the tuner and frequency tests of v4l2-compliance. It's the usual bugs: frequency wasn't clamped to the valid frequency range, incorrect tuner capabilities and tuner fields not filled in, missing test for invalid tuner index, no initial frequency and incorrect error handling. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHuang Shijie <shijie8@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Set the correct parent for v4l2_device_register and don't set the name anymore (that's now deduced from the parent). Also remove an unnecessary forward reference and fix two weird looking log messages. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Frank Schaefer 提交于
Signed-off-by: NFrank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Now that some devices initialize register 0x2a with different values, add the calculus formula, instead of hardcoding it. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Up to now, the driver was simply assuming TV mode, 13 segs. Implement the logic to control the ISDB operational mode. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-