- 01 6月, 2005 11 次提交
-
-
由 Goffredo Baroncelli 提交于
in fs/udf/udftime.c the global array '__mon_yday' is not static, and it conflicts with the glibc one when the kernel is compiled as user mode. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Chubb 提交于
In file included from drivers/firmware/pcdp.c:18: drivers/firmware/pcdp.h:48: error: field `addr' has incomplete type drivers/firmware/pcdp.c: In function `setup_serial_console': drivers/firmware/pcdp.c:27: error: `ACPI_ADR_SPACE_SYSTEM_MEMORY' undeclared (first use in this function) Cc: <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
flush_icache_range() is used in two different situation - in binfmt_elf.c & co for user space mappings and module.c for kernel modules. On m68k flush_icache_range() doesn't know which data to flush, as it has separate address spaces and the pointer argument can be valid in either address space. First I considered splitting flush_icache_range(), but this patch is simpler. Setting the correct context gives flush_icache_range() enough information to flush the correct data. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
We used to have an iseries specific profiler that used /proc/profile. Now thats gone we can use the generic timer based stuff. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
h8300 appears to sleep (halt) when need_resched IS set. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexander Nyberg 提交于
This is a neverending story linux/acpi.h contains empty declarations for acpi_boot_init() & acpi_boot_table_init() but they are nested inside #ifdef CONFIG_ACPI. So we'll have to #ifdef in arch/i386/kernel/setup.c: setup_arch() Signed-off-by: NAlexander Nyberg <alexn@telia.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Make CONFIG_X86_PM_TIMER dependent on CONFIG_ACPI Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Suggested by Alexander Nyberg Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tony Luck 提交于
I was gently reminded that there are per-cpu forms of the EXPORT_SYMBOL macros. Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jens Axboe 提交于
Only the address needs alignment of mask bits, length should work with a relaxed alignment check. Signed-off-by: NJens Axboe <axboe@suse.de> [ This is take 2: make the length check be for 16-byte alignment, not just word alignment. That should hopefully keep everybody happy, while still allowing CD writing with DMA ] Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 5月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
When I sent in the patch adding the code for the kernel to tell the firmware about its capabilities on pSeries machines, I included the function to give the capabilities to firmware but somehow forgot the hunk that adds the call to the new function. This patch adds the call. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 5月, 2005 26 次提交
-
-
由 David S. Miller 提交于
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We are intentionally ignoring the copy_to_user() value, make it clear to the compiler too. Noted by Jeff Garzik. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B. Shelar 提交于
It cannot work properly, so just ignore it in drr and rr multipath algorithms just like the random multipath algorithm does. Suggested by Herbert Xu. Signed-off by: Pravin B. Shelar <pravins@calsoftinc.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Ellerman 提交于
This patch adds is_multicast_ether_addr() to go along with is_valid_ether_addr() and friends. It then changes is_valid_ether_addr() to use the new macro, and fixes up the comment on that function to move implementation details out of the API doco. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harald Welte 提交于
Add an option to make secondary IP addresses get promoted when primary IP addresses are removed from the device. It defaults to off to preserve existing behavior. Signed-off-by: NHarald Welte <laforge@gnumonks.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add tg3_nvram_lock() and tg3_nvram_unlock() calls around tg3_halt_cpu(). It is possible that the bootcode may be loading code from nvram during this call and stopping the cpu without getting the lock may cause uncompleted nvram data to be left in the nvram data register. Subsequent calls to read/write nvram data will fail. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
This test uses the previously added tg3_test_interrupt() to perform the test. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The test will loopback one packet in MAC loopback mode and verify the packet data. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add a reset kind parameter to tg3_halt() so that the RESET_KIND_SUSPEND parameter can be passed to tg3_halt() before doing offline tests. All other calls to tg3_halt() will use the RESET_KIND_SHUTDOWN parameter. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This improves the bridge local receive path by avoiding going through another softirq. The bridge receive path is already being called from a netif_receive_skb() there is no point in going through another receiveq round trip. Recursion is limited because bridge can never be a port of a bridge so handle_bridge() always returns. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Avoid poisoning of the bridge forwarding table by frames that have been dropped by filtering. This prevents spoofed source addresses on hostile side of bridge from causing packet leakage, a small but possible security risk. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Make features of the bridge pseudo-device be a subset of the underlying devices. Motivated by Xen and others who use bridging to do failover. Signed-off-by: Catalin BOIE <catab at umrella.ro> Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
The features field in netdevice is really a bitmask, and bitmask's should be unsigned. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Resend of earlier patch (no changes) from Catalin used to provide device feature change notification. Signed-off-by: Catalin BOIE <catab at umbrella.ro> Acked-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
- 29 5月, 2005 2 次提交
-
-
由 Vojtech Pavlik 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Kumar Gala 提交于
Trying to initialize the i8259 PIC will not work if CONFIG_PCI is not enabled. The kernel hangs if the initialization is tried. Signed-off-by: NKumar Gala <kumar.gala@freescale.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-