Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 21 6月, 2012 1 次提交
  3. 20 6月, 2012 1 次提交
  5. 18 6月, 2012 2 次提交
    • S
      ftrace: Make all inline tags also include notrace · 93b3cca1
      由 Steven Rostedt 提交于 
      Commit 5963e317 ("ftrace/x86: Do not change stacks in DEBUG when
calling lockdep") prevented lockdep calls from the int3 breakpoint handler
from reseting the stack if a function that was called was in the process
of being converted for tracing and had a breakpoint on it. The idea is,
before calling the lockdep code, do a load_idt() to the special IDT that
kept the breakpoint stack from reseting. This worked well as a quick fix
for this kernel release, until a certain config caused a lockup in the
function tracer start up tests.

Investigating it, I found that the load_idt that was used to prevent
the int3 from changing stacks was itself being traced!

Even though the config had CONFIG_OPTIMIZE_INLINING disabled, and
all 'inline' tags were set to always inline, there were still cases that
it did not inline! This was caused by CONFIG_PARAVIRT_GUEST, where it
would add a pointer to the native_load_idt() which made that function
to be traced.

Commit 45959ee7 ("ftrace: Do not function trace inlined functions")
only touched the 'inline' tags when CONFIG_OPMITIZE_INLINING was enabled.
PARAVIRT_GUEST shows that this was not enough and we need to also
mark always_inline with notrace as well.
Reported-by: NFengguang Wu <wfg@linux.intel.com>
Tested-by: NFengguang Wu <wfg@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      93b3cca1
    • S
      perf: Use css_tryget() to avoid propping up css refcount · 9c5da09d
      由 Salman Qazi 提交于 
      An rmdir pushes css's ref count to zero.  However, if the associated
directory is open at the time, the dentry ref count is non-zero.  If
the fd for this directory is then passed into perf_event_open, it
does a css_get().  This bounces the ref count back up from zero.  This
is a problem by itself.  But what makes it turn into a crash is the
fact that we end up doing an extra dput, since we perform a dput
when css_put sees the ref count go down to zero.

css_tryget() does not fall into that trap. So, we use that instead.

Reproduction test-case for the bug:

 #include <unistd.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <fcntl.h>
 #include <linux/unistd.h>
 #include <linux/perf_event.h>
 #include <string.h>
 #include <errno.h>
 #include <stdio.h>

 #define PERF_FLAG_PID_CGROUP    (1U << 2)

 int perf_event_open(struct perf_event_attr *hw_event_uptr,
                     pid_t pid, int cpu, int group_fd, unsigned long flags) {
         return syscall(__NR_perf_event_open,hw_event_uptr, pid, cpu,
                 group_fd, flags);
 }

 /*
  * Directly poke at the perf_event bug, since it's proving hard to repro
  * depending on where in the kernel tree.  what moved?
  */
 int main(int argc, char **argv)
 {
        int fd;
        struct perf_event_attr attr;
        memset(&attr, 0, sizeof(attr));
        attr.exclude_kernel = 1;
        attr.size = sizeof(attr);
        mkdir("/dev/cgroup/perf_event/blah", 0777);
        fd = open("/dev/cgroup/perf_event/blah", O_RDONLY);
        perror("open");
        rmdir("/dev/cgroup/perf_event/blah");
        sleep(2);
        perf_event_open(&attr, fd, 0, -1,  PERF_FLAG_PID_CGROUP);
        perror("perf_event_open");
        close(fd);
        return 0;
 }
Signed-off-by: NSalman Qazi <sqazi@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20120614223108.1025.2503.stgit@dungbeetle.mtv.corp.google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      9c5da09d
  7. 16 6月, 2012 1 次提交
  9. 14 6月, 2012 1 次提交
    • D
      watchdog: Quiet down the boot messages · a7027046
      由 Don Zickus 提交于 
      A bunch of bugzillas have complained how noisy the nmi_watchdog
is during boot-up especially with its expected failure cases
(like virt and bios resource contention).

This is my attempt to quiet them down and keep it less confusing
for the end user.  What I did is print the message for cpu0 and
save it for future comparisons.  If future cpus have an
identical message as cpu0, then don't print the redundant info.
However, if a future cpu has a different message, happily print
that loudly.

Before the change, you would see something like:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node   0, Processors  #1
    NMI watchdog enabled, takes one hw-pmu counter.
     #2
    NMI watchdog enabled, takes one hw-pmu counter.
     #3 Ok.
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 4 CPUs
    Total of 4 processors activated (22607.24 BogoMIPS).

After the change, it is simplified to:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Booting Node   0, Processors  #1 #2 #3 Ok.
    Brought up 4 CPUs

V2: little changes based on Joe Perches' feedback
V3: printk cleanup based on Ingo's feedback; checkpatch fix
V4: keep printk as one long line
V5: Ingo fix ups
Reported-and-tested-by: NNathan Zimmer <nzimmer@sgi.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: nzimmer@sgi.com
Cc: joe@perches.com
Link: http://lkml.kernel.org/r/1339594548-17227-1-git-send-email-dzickus@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      a7027046
  11. 13 6月, 2012 1 次提交
  13. 12 6月, 2012 1 次提交
    • A
      perf tools: Fix synthesizing tracepoint names from the perf.data headers · cb9dd49e
      由 Arnaldo Carvalho de Melo 提交于 
      We need to use the per event info snapshoted at record time to
synthesize the events name, so do it just after reading the perf.data
headers, when we already processed the /sys events data, otherwise we'll
end up using the local /sys that only by sheer luck will have the same
tracepoint ID -> real event association.

Example:

  # uname -a
  Linux felicio.ghostprotocols.net 3.4.0-rc5+ #1 SMP Sat May 19 15:27:11 BRT 2012 x86_64 x86_64 x86_64 GNU/Linux
  # perf record -e sched:sched_switch usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.015 MB perf.data (~648 samples) ]
  # cat /t/events/sched/sched_switch/id
  279
  # perf evlist -v
  sched:sched_switch: sample_freq=1, type: 2, config: 279, size: 80, sample_type: 1159, read_format: 7, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
  #

So on the above machine the sched:sched_switch has tracepoint id 279, but on
the machine were we'll analyse it it has a different id:

  $ cat /t/events/sched/sched_switch/id
  56
  $ perf evlist -i /tmp/perf.data
  kmem:mm_balancedirty_writeout
  $ cat /t/events/kmem/mm_balancedirty_writeout/id
  279

With this fix:

  $ perf evlist -i /tmp/perf.data
  sched:sched_switch
Reported-by: NDmitry Antipov <dmitry.antipov@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-auwks8fpuhmrdpiefs55o5oz@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cb9dd49e
  15. 11 6月, 2012 2 次提交
    • S
      perf stat: Fix default output file · fc3e4d07
      由 Stephane Eranian 提交于 
      The following commit:

commit 56f3bae7
Author: Jim Cromie <jim.cromie@gmail.com>
Date:   Wed Sep 7 17:14:00 2011 -0600

    perf stat: Add --log-fd <N> option to redirect stderr elsewhere

introduced a bug in the way perf stat outputs the results by default,
i.e., without the --log-fd or --output option. It would default to
writing to file descriptor 0, i.e., stdin. Writing to stdin is allowed
and is equivalent to writing to stdout. However, there is a major
difference for any script that was already capturing the output of perf
stat via redirection:

    perf stat >/tmp/log .... or perf stat 2>/tmp/log ....

They would not capture anything anymore. They would have to do:
    perf stat 0>/tmp/log ...

This breaks compatibility with existing scripts and does not look very
natural.

This patch fixes the problem by looking at output_fd only when it was
modified by user (> 0). It also checks that the value if positive.
Passing --log-fd 0 is ignored.

I would also argue that defaulting to stderr for the results is not the
right thing to do, though this patch does not address this specific
issue.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jim Cromie <jim.cromie@gmail.com>
Link: http://lkml.kernel.org/r/20120515111111.GA9870@quadSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fc3e4d07
    • D
      perf tools: Fix endianity swapping for adds_features bitmask · 80c0120a
      由 David Ahern 提交于 
      Based on Jiri's latest attempt:
https://lkml.org/lkml/2012/5/16/61

Basically, adds_features should be byte swapped assuming unsigned
longs are either 8-bytes (u64) or 4-bytes (u32).

    Fixes 32-bit ppc dumping 64-bit x86 feature data:
     ========
     captured on: Sun May 20 19:23:23 2012
     hostname : nxos-vdc-dev3
     os release : 3.4.0-rc7+
     perf version : 3.4.rc4.137.g978da3
     arch : x86_64
     nrcpus online : 16
     nrcpus avail : 16
     cpudesc : Intel(R) Xeon(R) CPU E5540 @ 2.53GHz
     cpuid : GenuineIntel,6,26,5
     total memory : 24680324 kB
    ...

Verified 64-bit x86 can still dump feature data for 32-bit ppc.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Reviewed-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4FBBB539.5010805@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      80c0120a
  17. 08 6月, 2012 1 次提交
  19. 07 6月, 2012 1 次提交
    • S
      tracing: Have tracing_off() actually turn tracing off · f2bf1f6f
      由 Steven Rostedt 提交于 
      A recent update to have tracing_on/off() only affect the ftrace ring
buffers instead of all ring buffers had a cut and paste error.
The tracing_off() did the exact same thing as tracing_on() and
would not actually turn off tracing. Unfortunately, tracing_off()
is more important to be working than tracing_on() as this is a key
development tool, as it lets the developer turn off tracing as soon
as a problem is discovered. It is also used by panic and oops code.

This bug also breaks the 'echo func:traceoff > set_ftrace_filter'

Cc: <stable@vger.kernel.org> # 3.4
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      f2bf1f6f
  21. 06 6月, 2012 12 次提交
  23. 05 6月, 2012 8 次提交
  25. 04 6月, 2012 5 次提交
  27. 03 6月, 2012 3 次提交