Mark variables which are usually accessed for reads with __readmostly.
Signed-off-by: NAlok N Kataria <alokk@calsoftinc.com>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

it has been a synonym for CONFIG_ACPI since 2.6.12
Signed-off-by: NLen Brown <len.brown@intel.com>

When the sparse mem changes and the kexec changes
were merged into setup.c they came in, in the wrong order.
This patch changes the order so we don't run sparse_init
which uses the bootmem allocator until we all of the
reserve_bootmem calls has been made.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Does not change any semantics because numa_add_cpu checks for CPU 0 anyways.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There has been some discuss about solving the SMP MTRR suspend/resume
breakage, but I didn't find a patch for it.  This is an intent for it.  The
basic idea is moving mtrr initializing into cpu_identify for all APs (so it
works for cpu hotplug).  For BP, restore_processor_state is responsible for
restoring MTRR.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the x86_64 implementation of the crashkernel option.  It reserves
a window of memory very early in the bootup process, so we never use
it for anything but the kernel to switch to when the running
kernel panics.

In addition to reserving this memory a resource structure is registered
so looking at /proc/iomem it is clear what happened to that memory.

ISSUES:
Is it possible to implement this in a architecture generic way?
What should be done with architectures that always use an iommu and
thus don't report their RAM memory resources in /proc/iomem?
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds __cpuinit and __cpuinitdata sections that need to exist past
boot to support cpu hotplug.

Caveat: This is done *only* for EM64T CPU Hotplug support, on request from
Andi Kleen.  Much of the generic hotplug code in kernel, and none of the other
archs that support CPU hotplug today, i386, ia64, ppc64, s390 and parisc dont
mark sections with __cpuinit, but only mark them as __devinit, and
__devinitdata.

If someone is motivated to change generic code, we need to make sure all
existing hotplug code does not break, on other arch's that dont use __cpuinit,
and __cpudevinit.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Acked-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds in the necessary support for sparsemem such that x86-64
kernels may use sparsemem as an alternative to discontigmem for NUMA
kernels.  Note that this does no preclude one from continuing to build NUMA
kernels using discontigmem, but merely allows the option to build NUMA
kernels with sparsemem.

Interestingly, the use of sparsemem in lieu of discontigmem in NUMA kernels
results in reduced text size for otherwise equivalent kernels as shown in
the example builds below:

   text	   data	    bss	    dec	    hex	filename
2371036	 765884	1237108	4374028	 42be0c	vmlinux.discontig
2366549	 776484	1302772	4445805	 43d66d	vmlinux.sparse
Signed-off-by: NMatt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In order to use the alternative sparsemem implmentation for NUMA kernels,
we need to reorganize the config options.  This patch effectively abstracts
out the CONFIG_DISCONTIGMEM options to CONFIG_NUMA in most cases.  Thus,
the discontigmem implementation may be employed as always, but the
sparsemem implementation may be used alternatively.
Signed-off-by: NMatt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch pulls out all remaining direct references to contig_page_data
from arch/x86-64, thus saving an ifdef in one case.
Signed-off-by: NMatt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Remove duplicated ifdef
- Make core_id match what Intel uses
- Initialize phys_proc_id correctly for non DC case
- Handle non power of two core numbers.

Fixes for both i386 and x86-64
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is not very useful to the user and more an kernel internal implementation
detail.  So hide it.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove x86_apicid field
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Last round hopefully of cpu_core_id changes hopefully fow now:

- Always initialize cpu_core_id for all CPUs, even when no dual core setup
  is detected.  This prevents funny /proc/cpuinfo output

- Do the same with phys_proc_id[] even when no HyperThreading - dito.

- Use the CPU APIC-ID from CPUID 1 instead of the linux virtual CPU number
  to identify the core for AMD dual core setups.

Patch for i386/x86-64.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

http://bugme.osdl.org/show_bug.cgi?id=4426

vendor_id       : AuthenticAMD
cpu family      : 6
model           : 10
model name      : AMD Athlon(tm) XP
stepping        : 0
cpu MHz         : 2204.807
<snipped>
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse pni syscall mmxext 3dnowext 3dnow
bogomips        : 4358.14

We're marking bit 0 of extended function 0x80000001 cpuid as PNI support on
AMD processors, when it actually denotes x87 FPU present.  Patch for i386
and x86_64 below.
Signed-off-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent support for K8 multicore was misported from x86-64 to i386, due
to an unnecessary inconsistency between the CPUID code.  Sure, there is are
no x86-64 VIA chips yet, but it should happen eventually.

This patch fixes the i386 bug as well as makes x86-64 match i386 in the
handing of the CPUID array.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- broken sibling_map setup in x86_64

- grouping all the core and HT related cpuinfo fields.
  We are reasonably sure that adding new cpuinfo fields after "siblings" field,
  will not cause any app failure. Thats because today's /proc/cpuinfo
  format is completely different on x86, x86_64 and we haven't heard of any
  x86 app breakage because of this issue. Grouping these fields will 
  result in more or less common format on all architectures (ia64, x86 and 
  x86_64) and will cause less confusion.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It was confusingly named.
Signed-off-by: NAndi Kleen <ak@suse.de>
DESC
x86_64: Switch SMP bootup over to new CPU hotplug state machine
EDESC
From: "Andi Kleen" <ak@suse.de>

This will allow hotplug CPU in the future and in general cleans up a lot of
crufty code.  It also should plug some races that the old hackish way
introduces.  Remove one old race workaround in NMI watchdog setup that is not
needed anymore.

I removed the old total sum of bogomips reporting code.  The brag value of
BogoMips has been greatly devalued in the last years on the open market.

Real CPU hotplug will need some more work, but the infrastructure for it is
there now.

One drawback: the new TSC sync algorithm is less accurate than before.  The
old way of zeroing TSCs is too intrusive to do later.  Instead the TSC of the
BP is duplicated now, which is less accurate.

Cc: <rusty@rustcorp.com.au>
Cc: <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add acpi_skip_timer_override option.  It was missing previously.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up the code greatly.  Now uses the infrastructure from the Intel dual
core patch Should fix a final bug noticed by Tyan of not detecting the nodes
correctly in some corner cases.

Patch for x86-64 and i386
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Appended patch adds the support for Intel dual-core detection and displaying
the core related information in /proc/cpuinfo.  

It adds two new fields "core id" and "cpu cores" to x86 /proc/cpuinfo and the
"core id" field for x86_64("cpu cores" field is already present in x86_64).

Number of processor cores in a die is detected using cpuid(4) and this is
documented in IA-32 Intel Architecture Software Developer's Manual (vol 2a)
(http://developer.intel.com/design/pentium4/manuals/index_new.htm#sdm_vol2a)

This patch also adds cpu_core_map similar to cpu_sibling_map.

Slightly hacked by AK.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Look for gaps in the e820 memory map to put PCI resources in.

This hopefully fixes problems with the PCI code assigning 32bit BARs MMIO
resources which are >32bit.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On Intel Noconas the TSC ticks with a constant frequency.  Don't scale the
factor used by udelay when cpufreq changes the frequency.

This generalizes an earlier patch by Intel for this. 

Cc: <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Only display physical id/siblings when there are siblings or dual core.

In 2.6.11 I accidentially broke it and it was always displaying these
fields But for compatibility to all these /proc parsers around it is better
to do it in the old way again.  

Noticed by Suresh Siddha

Cc: <Suresh.b.siddha@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!