- 07 1月, 2010 1 次提交
-
-
由 Zhenyu Wang 提交于
drm_pci_alloc() has input of address mask for setting pci dma mask on the device, which should be properly setup by drm driver. And leave it as a param for drm_pci_alloc() would cause confusion or mistake would corrupt the correct dma mask setting, as seen on intel hw which set wrong dma mask for hw status page. So remove it from drm_pci_alloc() function. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 12月, 2009 8 次提交
-
-
由 Marin Mitov 提交于
warning: 'width' may be used uninitialized in this function drivers/gpu/drm/drm_edid.c Signed-off-by: NMarin Mitov <mitov@issp.bas.bg> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Bob Gleitsmann 提交于
This is from bug 25728. [airlied: I'm just forwarding the patch for review, Thomas, ickle?] Acked-by: NJerome Glisse <jglisse@redhat.com> Acked-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Improve the command verifier to catch all occurences of surface handles, and translate to SIDs. This way DMA buffers and 3D surfaces share a common handle space, which makes it possible for the kms code to differentiate. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Fixes for TTM API change. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
This fixes up vmwgfx for the unlocked ioctl code to avoid doing it in the driver. Also adds ioctl flags. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
drivers/gpu/drm/radeon/radeon_test.c:45: undefined reference to `__udivdi3' Reported-by: NMr. James W. Laferriere <babydr@baby-dragons.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Julia Lawall 提交于
Use kzalloc rather than kcalloc(1,...) The use of the allocated memory that looks like an array is &p->relocs[0], but this should be the same as p->relocs. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Andi Kleen 提交于
linux/kernel.h has a "clamp" macro, but r300_cmdbuf also uses a variable with the same name. Right now it doesn't seem to include the header, but sooner or later someone will. So better rename the variable now. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 18 12月, 2009 3 次提交
-
-
由 Arnd Bergmann 提交于
drm_ioctl is called with the Big Kernel Lock held, which shows up very high in statistics on vfs_ioctl. Moving the lock into the drm_ioctl function itself makes sure we blame the right subsystem and it gets us one step closer to eliminating the locked version of fops->ioctl. Since drm_ioctl does not require the lock itself, we only need to hold it while calling the specific handler. The 32 bit conversion handlers do not interact with any other code, so they don't need the BKL here either and can just call drm_ioctl. As a bonus, this cleans up all the other users of drm_ioctl which now no longer have to find the inode or call lock_kernel. [airlied: squashed the non-driver bits of the second patch in here, this provides the flag for drivers to use to select unlocked ioctls - but doesn't modify any drivers]. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.sourceforge.net Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
-
由 Dave Airlie 提交于
-
- 16 12月, 2009 18 次提交
-
-
由 Dave Airlie 提交于
This adds support for compressed textures to the r100->r500 CS checker, it lets me run openarena and the demos in mesa fine. Thanks to Maciej Cencora for initial comments. Changes since v1: fix calculations with Maciej formulas Reviewed-by: NMaciej Cencora <m.cencora@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Maciej Cencora 提交于
This adds the relocations for texture tiling for KMS. Signed-off-by: NMaciej Cencora <m.cencora@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
* korg/drm-radeon-next: drm/radeon/kms: init pm on all chipsets
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
* 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next: drm/nouveau: remove use of -ERESTART nouveau: Fix endianness with new context program loader drm/nouveau: fix build with CONFIG_AGP=n drm/nouveau: fix ch7006 build
-
由 Christian Koenig 提交于
Adding basic HDMI support for R600 KMS, ported from radeonhd ddx. [airlied:- checkpatch cleanups] Signed-off-by: NChristian Koenig <deathsimple@vodafone.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
We need to make sure the the MC is intialized before we map the blit shader object on r6xx+. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
radeon_object.h wasn't converted to ERESTARTSYS change. No each time we got an ERESTARTSYS we return to userspace (ie we were interrupted by a signal and we let the userspace reschedule the ioctl). Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Not sure it ever happens in practice, spotted during code review. spare brace snuck in Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
if we fail with ERESTARTSYS during alloc, we'll get a retry from userspace so don't report it in dmesg. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
If they are not radeon object don't do anythings special for them, this avoid rare oops than can happen in a complex use case. [airlied: additional fixups] Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Do as we did before rework, if no placement is supplied at bo creation time, fallback to allocating bo from system ram. This will fix most of the creation failed issue report we got since the rework get merged. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
System memory type doesn't have a drm_mm manager associated to it. This patch avoid trying to call drm_mm_debug on unitialized drm_mm when printing debug info on the system memory manager. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
1) The function was previously called with a potentially empty LRU list which would have lead to an OOPS or servere corruption. 2) In rare cases, after reservation has succeeded, another process may already have evicted it or even pinned it. We must revalidate the buffer status after releasing the lru lock. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
1) Remove from lru before reserving so we avoid competing with evicting processes. 2) Avoid calling kref_put() on bo::list_kref while spinlocked. 3) Additional refcounting bug-checking. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
a) the loops were going to <= not <, leading to illegal memory access b) the busy placement checks were using the placement arrays not the busy placement ones. Acked-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This path isn't used by radeon yet, but future drivers will want it, so fix it right. Reported-by: NLuca Barbieri <luca@luca-barbieri.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 15 12月, 2009 7 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
When switching to request_firmware() to load the context programs, some endian fixes need to be applied. This makes it work again on my quad g5 nvidia 6600. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Randy Dunlap 提交于
The ch7006 driver could be built even when nouveau was not enabled, but the build fails in that case, so make it depend on DRM_NOUVEUA. Also make the I2c encoder/helper chips menu depend on I2C (no build error, just visual inspection). ERROR: "drm_helper_probe_single_connector_modes" [drivers/gpu/drm/i2c/ch7006.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Jakob Bornecrantz 提交于
This commit adds the vmwgfx driver for the VWware Virtual GPU aka SVGA. The driver is under staging the same as Nouveau and Radeon KMS. Hopefully the 2D ioctls are bug free and don't need changing, so that part of the API should be stable. But there there is a pretty big chance that the 3D API will change in the future. Signed-off-by: NThomas Hellström <thellstrom@vmware.com> Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
These headers are shared between multiple place where different coding standards apply. They will be fixed up at a later time. Signed-off-by: NThomas Hellström <thellstrom@vmware.com> Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 11 12月, 2009 3 次提交
-
-
由 Ben Skeggs 提交于
This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA. This driver is a KMS-based driver and requires a compatible nouveau userspace libdrm and nouveau X.org driver. This driver requires firmware files not available in this kernel tree, interested parties can find them via the nouveau project git archive. This driver is reverse engineered, and is in no way supported by nVidia. Support for nearly the complete range of nvidia hw from nv04->g80 (nv50) is available, and the kms driver should support driving nearly all output types (displayport is under development still) along with supporting suspend/resume. This work is all from the upstream nouveau project found at nouveau.freedesktop.org. The original authors list from nouveau git tree is: Anssi Hannula <anssi.hannula@iki.fi> Ben Skeggs <bskeggs@redhat.com> Francisco Jerez <currojerez@riseup.net> Maarten Maathuis <madman2003@gmail.com> Marcin Kościelnicki <koriakin@0x04.net> Matthew Garrett <mjg@redhat.com> Matt Parnell <mparnell@gmail.com> Patrice Mandin <patmandin@gmail.com> Pekka Paalanen <pq@iki.fi> Xavier Chantry <shiningxc@gmail.com> along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
These are functions required by nouveau which will be merged later. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-