Update the allocation logic for the virtual mapping of the UEFI runtime
services to start from a randomized base address if KASLR is in effect,
and if the UEFI firmware exposes an implementation of EFI_RNG_PROTOCOL.

This makes it more difficult to predict the location of exploitable
data structures in the runtime UEFI firmware, which increases robustness
against attacks. Note that these regions are only mapped during the
time a runtime service call is in progress, and only on a single CPU
at a time, bit given the lack of a downside, let's enable it nonetheless.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bhe@redhat.com
Cc: bhsharma@redhat.com
Cc: eugene@hp.com
Cc: evgeny.kalugin@intel.com
Cc: jhugo@codeaurora.org
Cc: leif.lindholm@linaro.org
Cc: linux-efi@vger.kernel.org
Cc: mark.rutland@arm.com
Cc: roy.franz@cavium.com
Cc: rruigrok@codeaurora.org
Link: http://lkml.kernel.org/r/20170404160910.28115-3-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The EFI stub currently prints a number of diagnostic messages that do
not carry a lot of information. Since these prints are not controlled
by 'loglevel' or other command line parameters, and since they appear on
the EFI framebuffer as well (if enabled), it would be nice if we could
turn them off.

So let's add support for the 'quiet' command line parameter in the stub,
and disable the non-error prints if it is passed.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bhe@redhat.com
Cc: bhsharma@redhat.com
Cc: bp@alien8.de
Cc: eugene@hp.com
Cc: evgeny.kalugin@intel.com
Cc: jhugo@codeaurora.org
Cc: leif.lindholm@linaro.org
Cc: linux-efi@vger.kernel.org
Cc: roy.franz@cavium.com
Cc: rruigrok@codeaurora.org
Link: http://lkml.kernel.org/r/20170404160910.28115-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge the parsing of the command line carried out in arm-stub.c with
the handling in efi_parse_options(). Note that this also fixes the
missing handling of CONFIG_CMDLINE_FORCE=y, in which case the builtin
command line should supersede the one passed by the firmware.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bhe@redhat.com
Cc: bhsharma@redhat.com
Cc: bp@alien8.de
Cc: eugene@hp.com
Cc: evgeny.kalugin@intel.com
Cc: jhugo@codeaurora.org
Cc: leif.lindholm@linaro.org
Cc: linux-efi@vger.kernel.org
Cc: mark.rutland@arm.com
Cc: roy.franz@cavium.com
Cc: rruigrok@codeaurora.org
Link: http://lkml.kernel.org/r/20170404160910.28115-1-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

When we parse the 'efi=' command line parameter in the stub, we
fail to take spaces into account. Currently, the only way this
could result in unexpected behavior is when the string 'nochunk'
appears as a separate command line argument after 'efi=xxx,yyy,zzz ',
so this is harmless in practice. But let's fix it nonetheless.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-12-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The arm32 kernel decompresses itself to the base of DRAM unconditionally,
and so it is the EFI stub's job to ensure that the region is available.

Currently, we do this by creating an allocation there, and giving up if
that fails. However, any boot services regions occupying this area are
not an issue, given that the decompressor executes strictly after the
stub calls ExitBootServices().

So let's try a bit harder to proceed if the initial allocation fails,
and check whether any memory map entries occupying the region may be
considered safe.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NLeif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: NEugene Cohen <eugene@hp.com>
Reviewed-by: NRoy Franz <roy.franz@cavium.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-11-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

EFI allocates runtime services regions from EFI_VA_START, -4G, down
to -68G, EFI_VA_END - 64G altogether, top-down.

The mechanism was introduced in commit:

  d2f7cbe7 ("x86/efi: Runtime services virtual mapping")

Fix the comment that still says bottom-up.
Signed-off-by: NBaoquan He <bhe@redhat.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-10-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

For some reason return value from actual variable setting was ignored.
With this change error code get transferred upwards through call stack.
Signed-off-by: NEvgeny Kalugin <evgeny.kalugin@intel.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-9-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now that the ACPI BGRT handling code has been made generic, we can
enable it for arm64.
Signed-off-by: NBhupesh Sharma <bhsharma@redhat.com>
[ Updated commit log to reflect that BGRT is only enabled for arm64, and added
  missing 'return' statement to the dummy acpi_parse_bgrt() function. ]
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-8-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Now with open-source boot firmware (EDK2) supporting ACPI BGRT table
addition even for architectures like AARCH64, it makes sense to move
out the 'efi-bgrt.c' file and supporting infrastructure from 'arch/x86'
directory and house it inside 'drivers/firmware/efi', so that this common
code can be used across architectures.
Signed-off-by: NBhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-7-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The FDT is mapped via a fixmap entry that is at least 2 MB in size and
2 MB aligned on 4 KB page size kernels.

On UEFI systems, the FDT allocation may share this 2 MB mapping with a
reserved region (or another memory region that we should never map),
unless we account for this in the size of the allocation (the alignment
is already 2 MB)

So instead of taking guesses at the needed space, simply allocate 2 MB
immediately. The allocation will be recorded as EFI_LOADER_DATA, and the
kernel only memblock_reserve()'s the actual size of the FDT, so the
unused space will be released back to the kernel.
Reviewed-By: NJeffrey Hugo <jhugo@codeaurora.org>
Tested-by: NRichard Ruigrok <rruigrok@codeaurora.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-6-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

On arm64, we have made some changes over the past year to the way the
kernel itself is allocated and to how it deals with the initrd and FDT.
This patch brings the allocation logic in the EFI stub in line with that,
which is necessary because the introduction of KASLR has created the
possibility for the initrd to be allocated in a place where the kernel
may not be able to map it. (This is mostly a theoretical scenario, since
it only affects systems where the physical memory footprint exceeds the
size of the linear mapping.)

Since we know the kernel itself will be covered by the linear mapping,
choose a suitably sized window (i.e., based on the size of the linear
region) covering the kernel when allocating memory for the initrd.

The FDT may be anywhere in memory on arm64 now that we map it via the
fixmap, so we can lift the address restriction there completely.
Tested-by: NRichard Ruigrok <rruigrok@codeaurora.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: NJeffrey Hugo <jhugo@codeaurora.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20170404160245.27812-4-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

On UEFI systems, the PCI subsystem is enumerated by the firmware,
and if a graphical framebuffer is exposed via a PCI device, its base
address and size are exposed to the OS via the Graphics Output
Protocol (GOP).

On arm64 PCI systems, the entire PCI hierarchy is reconfigured from
scratch at boot. This may result in the GOP framebuffer address to
become stale, if the BAR covering the framebuffer is modified. This
will cause the framebuffer to become unresponsive, and may in some
cases result in unpredictable behavior if the range is reassigned to
another device.

So add a non-x86 quirk to the EFI fb driver to find the BAR associated
with the GOP base address, and claim the BAR resource so that the PCI
core will not move it.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.7+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: leif.lindholm@linaro.org
Cc: linux-efi@vger.kernel.org
Cc: lorenzo.pieralisi@arm.com
Fixes: 9822504c ("efifb: Enable the efi-framebuffer platform driver ...")
Link: http://lkml.kernel.org/r/20170404152744.26687-3-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The UEFI Specification permits Graphics Output Protocol (GOP) instances
without direct framebuffer access. This is indicated in the Mode structure
with a PixelFormat enumeration value of PIXEL_BLT_ONLY. Given that the
kernel does not know how to drive a Blt() only framebuffer (which is only
permitted before ExitBootServices() anyway), we should disregard such
framebuffers when looking for a GOP instance that is suitable for use as
the boot console.

So modify the EFI GOP initialization to not use a PIXEL_BLT_ONLY instance,
preventing attempts later in boot to use an invalid screen_info.lfb_base
address.
Signed-off-by: NEugene Cohen <eugene@hp.com>
[ Moved the Blt() only check into the loop and clarified that Blt() only GOPs are unusable by the kernel. ]
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.7+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: leif.lindholm@linaro.org
Cc: linux-efi@vger.kernel.org
Cc: lorenzo.pieralisi@arm.com
Fixes: 9822504c ("efifb: Enable the efi-framebuffer platform driver ...")
Link: http://lkml.kernel.org/r/20170404152744.26687-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull late GPIO fixes from Linus Walleij:
 "Some late coming ACPI fixes for GPIO.

  We're dealing with ACPI issues here. The first is related to wake IRQs
  on Bay Trail/Cherry Trail CPUs which are common in laptops. The second
  is about proper probe deferral when reading _CRS properties.

  For my untrained eye it seems there was some quarrel between the BIOS
  and the kernel about who is supposed to deal with wakeups from GPIO
  lines"

* tag 'gpio-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  ACPI / gpio: do not fall back to parsing _CRS when we get a deferral
  gpio: acpi: Call enable_irq_wake for _IAE GpioInts with Wake set

Pull nios2 fix from Ley Foon Tan:

 - nios2: reserve boot memory for device tree

* tag 'nios2-v4.11-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: reserve boot memory for device tree

Pull drm fixes from Dave Airlie:
 "This is just mostly stuff that missed rc5, from vmwgfx and msm
  drivers"

* tag 'drm-fixes-for-v4.11-rc6' of git://people.freedesktop.org/~airlied/linux:
  drm/msm: Make sure to detach the MMU during GPU cleanup
  drm/msm/hdmi: redefinitions of macros not required
  drm/msm/mdp5: Update SSPP_MAX value
  drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
  drm/msm: Don't allow zero sized buffer objects
  drm/msm: Fix wrong pointer check in a5xx_destroy
  drm/msm: adreno: fix build error without debugfs
  drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
  drm/vmwgfx: Remove getparam error message
  drm/ttm: Avoid calling drm_ht_remove from atomic context
  drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
  drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
  drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
  drm/vmwgfx: Type-check lookups of fence objects

Pull Xtensa fixes from Max Filippov:

 - make __pa work with uncached KSEG addresses, it fixes DMA memory
   mmapping and DMA debug

 - fix torn stack dump output

 - wire up statx syscall

* tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: wire up statx system call
  xtensa: fix stack dump output
  xtensa: make __pa work with uncached KSEG addresses

misc msm fixes.

* 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Make sure to detach the MMU during GPU cleanup
  drm/msm/hdmi: redefinitions of macros not required
  drm/msm/mdp5: Update SSPP_MAX value
  drm/msm/dsi: Fix bug in dsi_mgr_phy_enable
  drm/msm: Don't allow zero sized buffer objects
  drm/msm: Fix wrong pointer check in a5xx_destroy
  drm/msm: adreno: fix build error without debugfs

We should be detaching the MMU before destroying the address
space. To do this cleanly, the detach has to happen in
adreno_gpu_cleanup() because it needs access to structs
in adreno_gpu.c.  Plus it is better symmetry to have
the attach and detach at the same code level.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

4 macros already defined in hdmi.h,
which is not required to redefine in hdmi_audio.c
Signed-off-by: NVinay Simha BN <simhavcs@gmail.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

'SSPP_MAX + 1' is the max number of hwpipes that can be present on a
MDP5 platform. Recently, 2 new cursor hwpipes were added, which
caused overflows in arrays that used SSPP_MAX to represent the number
of elements. Update the SSPP_MAX value to incorporate the extra
hwpipes.
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

A recent commit introduces a bug in dsi_mgr_phy_enable. In the non
dual DSI mode, we reset the mdsi (master DSI) PHY. This isn't right
since master and slave DSI exist only in dual DSI mode. For the normal
mode of operation, we should simply reset the PHY of the DSI device
(i.e. msm_dsi) corresponding to the current bridge.

Usage of the wrong DSI pointer also resulted in a static checker
warning. That too is resolved with this fix.

Fixes: b62aa70a (drm/msm/dsi: Move PHY operations out of host)
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Zero sized buffer objects tend to make various bits of the GEM
infrastructure complain:

 WARNING: CPU: 1 PID: 2323 at drivers/gpu/drm/drm_mm.c:389 drm_mm_insert_node_generic+0x258/0x2f0
 Modules linked in:

 CPU: 1 PID: 2323 Comm: drm-api-test Tainted: G        W 4.9.0-rc4-00906-g693af44 #213
 Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
 task: ffff8000d7353400 task.stack: ffff8000d7720000
 PC is at drm_mm_insert_node_generic+0x258/0x2f0
 LR is at drm_vma_offset_add+0x4c/0x70

Zero sized buffers serve no appreciable value to the user so disallow
them at create time.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Instead of checking for a5xx_gpu->gpmu_iova during destroy we
accidently check a5xx_gpu->gpmu_bo.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The newly added a5xx support fails to build when debugfs is diabled:

drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:11: error: 'a5xx_show' undeclared here (not in a function); did you mean 'a5xx_irq'?

This adds a missing #ifdef.

Fixes: b5f103ab ("drm/msm: gpu: Add A5XX target support")
Cc: stable@vger.kernel.org
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Set of vmwgfx fixes
* 'vmwgfx-fixes-4.11' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()
  drm/vmwgfx: Remove getparam error message
  drm/ttm: Avoid calling drm_ht_remove from atomic context
  drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces
  drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()
  drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()
  drm/vmwgfx: Type-check lookups of fence objects

Pull s390 fixes from Martin Schwidefsky:
 "Four bug fixes, two of them for stable:

   - avoid initrd corruptions in the kernel decompressor

   - prevent inconsistent dumps if the boot CPU does not have address
     zero

   - fix the new pkey interface added with the merge window for 4.11

   - a fix for a fix, another issue with user copy zero padding"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/uaccess: get_user() should zero on failure (again)
  s390/pkey: Fix wrong handling of secure key with old MKVP
  s390/smp: fix ipl from cpu with non-zero address
  s390/decompressor: fix initrd corruption caused by bss clear

Pull RAS fix from Thomas Gleixner:
 "Prevent dmesg from being spammed when MCE logging is active"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Don't print MCEs when mcelog is active

Make sure to reserve the boot memory for the flattened device tree.
Otherwise it might get overwritten, e.g. when initial_boot_params is
copied, leading to a corrupted FDT and a boot hang/crash:

  bootconsole [early0] enabled
  Early console on uart16650 initialized at 0xf8001600
  OF: fdt: Error -11 processing FDT
  Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

  ---[ end Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

Guenter Roeck says:

> I think I found the problem. In unflatten_and_copy_device_tree(), with added
> debug information:
>
> OF: fdt: initial_boot_params=c861e400, dt=c861f000 size=28874 (0x70ca)
>
> ... and then initial_boot_params is copied to dt, which results in corrupted
> fdt since the memory overlaps. Looks like the initial_boot_params memory
> is not reserved and (re-)allocated by early_init_dt_alloc_memory_arch().

Cc: stable@vger.kernel.org
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Reference: http://lkml.kernel.org/r/20170226210338.GA19476@roeck-us.netTested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NLey Foon Tan <ley.foon.tan@intel.com>

Pull dmaengine fixes from Vinod Koul:
 "A couple of minor fixes for 4.11:

   - array bound fix for __get_unmap_pool()

   - cyclic period splitting for bcm2835"

* tag 'dmaengine-fix-4.11-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
  dmaengine: bcm2835: Fix cyclic DMA period splitting

Pull x86 fixes from Thomas Gleixner:
 "This update provides:

   - prevent KASLR from randomizing EFI regions

   - restrict the usage of -maccumulate-outgoing-args and document when
     and why it is required.

   - make the Global Physical Address calculation for UV4 systems work
     correctly.

   - address a copy->paste->forgot-edit problem in the MCE exception
     table entries.

   - assign a name to AMD MCA bank 3, so the sysfs file registration
     works.

   - add a missing include in the boot code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Include missing header file
  x86/mce/AMD: Give a name to MCA bank 3 when accessed with legacy MSRs
  x86/build: Mostly disable '-maccumulate-outgoing-args'
  x86/mm/KASLR: Exclude EFI region from KASLR VA space randomization
  x86/mce: Fix copy/paste error in exception table entries
  x86/platform/uv: Fix calculation of Global Physical Address

Pull scheduler fixes from Thomas Gleixner:
 "This update provides:

   - make the scheduler clock switch to unstable mode smooth so the
     timestamps stay at microseconds granularity instead of switching to
     tick granularity.

   - unbreak perf test tsc by taking the new offset into account which
     was added in order to proveide better sched clock continuity

   - switching sched clock to unstable mode runs all clock related
     computations which affect the sched clock output itself from a work
     queue. In case of preemption sched clock uses half updated data and
     provides wrong timestamps. Keep the math in the protected context
     and delegate only the static key switch to workqueue context.

   - remove a duplicate header include"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/headers: Remove duplicate #include <linux/sched/debug.h> line
  sched/clock: Fix broken stable to unstable transfer
  sched/clock, x86/perf: Fix "perf test tsc"
  sched/clock: Fix clear_sched_clock_stable() preempt wobbly

Pull EFI fix from Thomas Gleixner:
 "Downgrade the missing ESRT header printk to warning level and remove a
  useless error printk which just generates noise for no value"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/esrt: Cleanup bad memory map log messages

Pull timer fixes from Thomas Gleixner:
 "Two small fixes for the new CLKEVT_OF infrastructure"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  vmlinux.lds: Add __clkevt_of_table to kernel
  clockevents: Fix syntax error in clkevt-of macro

Pull irq fixes from Thomas Gleixner:
 "Two small fixlets:

   - select a required Kconfig to make the MVEBU driver compile

   - add the missing MIPS local GIC interrupts which prevent drivers to
     probe successfully"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Fix Local compare interrupt
  irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN

Pull core fix from Thomas Gleixner:
 "Prevent leaking kernel memory via /proc/$pid/syscall when the queried
  task is not in a syscall"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lib/syscall: Clear return values when no stack

Pull parisc fixes from Helge Deller:
 "Al Viro reported that - in case of read faults - our copy_from_user()
  implementation may claim to have copied more bytes than it actually
  did. In order to fix this bug and because of the way how gcc optimizes
  register usage for inline assembly in C code, we had to replace our
  pa_memcpy() function with a pure assembler implementation.

  While fixing the memcpy bug we noticed some other issues with our
  get_user() and put_user() functions, e.g. nested faults may return
  wrong data. This is now fixed by a common fixup handler for
  get_user/put_user in the exception handler which additionally makes
  generated code smaller and faster.

  The third patch is a trivial one-line fix for a patch which went in
  during 4.11-rc and which avoids stalled CPU warnings after power
  shutdown (for parisc machines which can't plug power off themselves).

  Due to the rewrite of pa_memcpy() into assembly this patch got bigger
  than what I wanted to have sent at this stage.

  Those patches have been running in production during the last few days
  on our debian build servers without any further issues"

* 'parisc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Avoid stalled CPU warnings after system shutdown
  parisc: Clean up fixup routines for get_user()/put_user()
  parisc: Fix access fault handling in pa_memcpy()

Pull SCSI fixes from James Bottomley:
 "Thirteen small fixes: The hopefully final effort to get the lpfc nvme
  kconfig problems sorted, there's one important sg fix (user can induce
  read after end of buffer) and one minor enhancement (adding an extra
  PCI ID to qedi). The rest are a set of minor fixes, which mostly occur
  as user visible in error legs or on specific devices"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: remove the duplicated checking for supporting clkscaling
  scsi: lpfc: fix building without debugfs support
  scsi: lpfc: Fix PT2PT PRLI reject
  scsi: hpsa: fix volume offline state
  scsi: libsas: fix ata xfer length
  scsi: scsi_dh_alua: Warn if the first argument of alua_rtpg_queue() is NULL
  scsi: scsi_dh_alua: Ensure that alua_activate() calls the completion function
  scsi: scsi_dh_alua: Check scsi_device_get() return value
  scsi: sg: check length passed to SG_NEXT_CMD_LEN
  scsi: ufshcd-platform: remove the useless cast in ERR_PTR/IS_ERR
  scsi: qedi: Add PCI device-ID for QL41xxx adapters.
  scsi: aacraid: Fix potential null access
  scsi: qla2xxx: Fix crash in qla2xxx_eh_abort on bad ptr

Merge misc fixes from Andrew Morton:
 "11 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: do not sanitize kexec purgatory
  drivers/rapidio/devices/tsi721.c: make module parameter variable name unique
  mm/hugetlb.c: don't call region_abort if region_chg fails
  kasan: report only the first error by default
  hugetlbfs: initialize shared policy as part of inode allocation
  mm: fix section name for .data..ro_after_init
  mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
  mm: workingset: fix premature shadow node shrinking with cgroups
  mm: rmap: fix huge file mmap accounting in the memcg stats
  mm: move mm_percpu_wq initialization earlier
  mm: migrate: fix remove_migration_pte() for ksm pages