After DMA is complete, the omap_sham_finish_req function is called as
a part of the done_task tasklet. During this its atomic and any calls
to pm functions should not assume they wont sleep.

The patch replaces a call to pm_runtime_put_sync (which can sleep) with
pm_runtime_put thus fixing a kernel panic observed on AM33xx SoC during
SHA operation.

Tested on an AM33xx SoC device (beaglebone board).
To reproduce the problem, used the tcrypt kernel module as:
modprobe tcrypt sec=2 mode=403
Signed-off-by: NJoel A Fernandes <joelagnel@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If we define dev_dbg(), then there is a possible NULL pointer
dereference.
Signed-off-by: NSyam Sidhardhan <s.syam@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Updates from IP release 0x320 to 0x400:
 - add DMA support (previous IP revision use PDC)
 - add DMA double input buffer support
 - add SHA224 support

Update from IP release 0x400 to 0x410:
 - add SHA384 and SHA512 support
Signed-off-by: NNicolas Royer <nicolas@eukrea.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NEric Bénard <eric@eukrea.com>
Tested-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Update from previous IP release (0x600):
 - add DMA support (previous IP release use PDC)
Signed-off-by: NNicolas Royer <nicolas@eukrea.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NEric Bénard <eric@eukrea.com>
Tested-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Updates from previous IP release (0x120):
 - add cfb64 support
 - add DMA double input buffer support
Signed-off-by: NNicolas Royer <nicolas@eukrea.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NEric Bénard <eric@eukrea.com>
Tested-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Delete successive tests to the same location.  The code tested the result
of a previous allocation, that itself was already tested.  It is changed to
test the result of the most recent allocation.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@s exists@
local idexpression y;
expression x,e;
@@

*if ( \(x == NULL\|IS_ERR(x)\|y != 0\) )
 { ... when forall
   return ...; }
... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\)
    when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\)
*if ( \(x == NULL\|IS_ERR(x)\|y != 0\) )
 { ... when forall
   return ...; }
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix the compile errors created by commit 2545e8d
(crypto: omap-sham - Add Device Tree Support)
when CONFIG_OF is not defined.  This includes
changing omap_sham_get_res_dev() to omap_sham_get_res_of()
and creating an empty version of omap_sham_of_match[].
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_clk_get() rather than clk_get() to make cleanup paths
more simple.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The OMAP3 and OMAP4/AM33xx versions of the AES crypto
module support the CTR algorithm in addition to ECB
and CBC that the OMAP2 version of the module supports.

So, OMAP2 and OMAP3 share a common register set but
OMAP3 supports CTR while OMAP2 doesn't.  OMAP4/AM33XX
uses a different register set from OMAP2/OMAP3 and
also supports CTR.

To add this support, use the platform_data introduced
in an ealier commit to hold the list of algorithms
supported by the current module.  The probe routine
will use that list to register the correct algorithms.

Note: The code being integrated is from the TI AM33xx SDK
and was written by Greg Turner <gkmturner@gmail.com> and
Herman Schuurman (current email unknown) while at TI.

CC: Greg Turner <gkmturner@gmail.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for the OMAP4 version of the AES module
that is present on OMAP4 and AM33xx SoCs.

The modules have several differences including register
offsets and how DMA is triggered.  To handle these
differences, a platform_data structure is defined and
contains routine pointers, register offsets, and bit
offsets within registers.  OMAP2/OMAP3-specific routines
are suffixed with '_omap2' and OMAP4/AM33xx routines are
suffixed with '_omap4'.

Note: The code being integrated is from the TI AM33xx SDK
and was written by Greg Turner <gkmturner@gmail.com> and
Herman Schuurman (current email unknown) while at TI.

CC: Greg Turner <gkmturner@gmail.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use the dma_request_slave_channel_compat() call instead of
the dma_request_channel() call to request a DMA channel.
This allows the omap-aes driver use different DMA engines.

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add Device Tree suport to the omap-aes crypto
driver.  Currently, only support for OMAP2 and
OMAP3 is being added but support for OMAP4 will
be added in a subsequent patch.

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove usage of the private OMAP DMA API.
The dmaengine API will be used instead.

CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add code to use the new dmaengine API alongside
the existing DMA code that uses the private
OMAP DMA API.  The API to use is chosen by
defining or undefining 'OMAP_AES_DMA_PRIVATE'.

CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add suspend/resume support to the OMAP AES driver.

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Convert the omap-aes crypto driver to use the
pm_runtime API instead of the clk API.

CC: Kevin Hilman <khilman@deeprootsystems.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The AES controller only needs to be reset once and that will
be done by the hwmod infrastructure, if possible.  Therefore,
remove the reset code from the omap-aes driver.

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the unnecessary pr_info() calls from omap_aes_probe()
and omap_aes_mod_init().

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The data referenced by an interrupt handler should not be freed before the
interrupt is ended.  The handler is bfin_crypto_crc_handler.  It may refer
to crc->regs, which is released by the iounmap.

Furthermore, the second argument to all calls to free_irq is incorrect.  It
should be the same as the last argument of request_irq, which is crc,
rather than crc->dev.

The semantic match that finds the first problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@fn exists@
expression list es;
expression a,b;
identifier f;
@@

if (...) {
  ... when any
  free_irq(a,b);
  ... when any
  f(es);
  ... when any
  return ...;
}

@@
expression list fn.es;
expression fn.a,fn.b;
identifier fn.f;
@@

*f(es);
... when any
*free_irq(a,b);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We still need to fix up few places for multiplatform support,
but that can proceed separately. Fix the issue by making the
problem drivers depends !ARCH_MULTIPLATFORM for now.

The remaining pieces that are not multiplatform compatible
for omap2+ SoCs are:

1. Some drivers are using custom omap_dm_timer calls

There are two drivers that are directly usign omap hardware
timers for PWM and DSP clocking: drivers/media/rc/ir-rx51.c and
drivers/staging/tidspbridge/core/dsp-clock.c. These can be
fixed for multiplatform by allowing a minimal set of hardware
timers to be accessed, and for some functionality by using the
hrtimer framework.

2. Hardware OMAP4_ERRATA_I688 needs to be fixed up

This can't be enabled for multiplatform configurations in
it's current form. It may be possible to fix it up to do
instruction replacement early on during init. Luckily it
looks like this errata does not seem to get hit with
mainline kernel code alone at least currently.

3. Legacy header needed for omap-sham.c

Looks like it still needs mach/irqs.h for omap1 that
does not exist for multiplatform systems. Just ifdef
it for now.

4. Mailbox is waiting to get moved to drivers

Disable it for now to avoid adding a dependency to the
mailbox patches.

Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi>
Cc: Sean Young <sean@mess.org>
Cc: "Víctor Manuel Jáquez Leal" <vjaquez@igalia.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
[tony@atomide.com: updated to disable mailbox]
Signed-off-by: NTony Lindgren <tony@atomide.com>

The OMAP4/AM33xx version of the SHAM crypto module
supports SHA224 and SHA256 in addition to MD5 and
SHA1 that the OMAP2 version of the module supports.

To add this support, use the platform_data introduced
in an ealier commit to hold the list of algorithms
supported by the current module.  The probe routine
will use that list to register the correct algorithms.

Note: The code being integrated is from the TI AM33xx SDK
and was written by Greg Turner <gkmturner@gmail.com> and
Herman Schuurman (current email unknown) while at TI.

CC: Greg Turner <gkmturner@gmail.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for the OMAP4 version of the SHAM module
that is present on OMAP4 and AM33xx SoCs.

The modules have several differences including register
offsets, hardware XORing, and how DMA is triggered.
To handle these differences, a platform_data structure
is defined and contains routine pointers, register offsets,
bit shifts within registers, and flags to indicate whether
the hardware supports XORing and provides SHA1 results in
big or little endian.  OMAP2/OMAP3-specific routines are
suffixed with '_omap2' and OMAP4/AM33xx routines are suffixed
with '_omap4'.

Note: The code being integrated is from the TI AM33xx SDK
and was written by Greg Turner <gkmturner@gmail.com> and
Herman Schuurman (current email unknown) while at TI.

CC: Greg Turner <gkmturner@gmail.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use the dma_request_slave_channel_compat() call instead of
the dma_request_channel() call to request a DMA channel.
This allows the omap-sham driver use different DMA engines.

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add Device Tree suport to the omap-sham crypto
driver.  Currently, only support for OMAP2 and
OMAP3 is being added but support for OMAP4 will
be added in a subsequent patch.

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove usage of the private OMAP DMA API.
The dmaengine API will be used instead.

CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add code to use the new dmaengine API alongside
the existing DMA code that uses the private
OMAP DMA API.  The API to use is chosen by
defining or undefining 'OMAP_SHAM_DMA_PRIVATE'.

This is a transitional change and the code that uses
the private DMA API will be removed in an upcoming
commit.

CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add suspend/resume support to the OMAP SHAM driver.

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Convert the omap-sham crypto driver to use the
pm_runtime API instead of the clk API.

CC: Kevin Hilman <khilman@deeprootsystems.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the unnecessary pr_info() call in omap_sham_mod_init().

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NMark A. Greer <mgreer@animalcreek.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Cc: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Based on earlier discussions[1] we attempted to find a suitable
location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP:
DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion
to dmaengine is complete.

Unfortunately that was before I was able to try to test compile
of the ARM multiplatform builds for omap2+, and the end result
was not very good.

So I'm creating yet another all over the place patch to cut the
last dependency for building omap2+ for ARM multiplatform. After
this, we have finally removed the driver dependencies to the
arch/arm code, except for few drivers that are being worked on.

The other option was to make the <plat-omap/dma-omap.h> path
to work, but we'd have to add some new header directory to for
multiplatform builds.

Or we would have to manually include arch/arm/plat-omap/include
again from arch/arm/Makefile for omap2+.

Neither of these alternatives sound appealing as they will
likely lead addition of various other headers exposed to the
drivers, which we want to avoid for the multiplatform kernels.

Since we already have a minimal include/linux/omap-dma.h,
let's just use that instead and add a note to it to not
use the custom omap DMA functions any longer where possible.

Note that converting omap DMA to dmaengine depends on
dmaengine supporting automatically incrementing the FIFO
address at the device end, and converting all the remaining
legacy drivers. So it's going to be few more merge windows.

[1] https://patchwork.kernel.org/patch/1519591/#

cc: Russell King <linux@arm.linux.org.uk>
cc: Kevin Hilman <khilman@ti.com>
cc: "Benoît Cousson" <b-cousson@ti.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Vinod Koul <vinod.koul@intel.com>
cc: Dan Williams <djbw@fb.com>
cc: Mauro Carvalho Chehab <mchehab@infradead.org>
cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
cc: David Woodhouse <dwmw2@infradead.org>
cc: Kyungmin Park <kyungmin.park@samsung.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
cc: Hans Verkuil <hans.verkuil@cisco.com>
cc: Vaibhav Hiremath <hvaibhav@ti.com>
cc: Lokesh Vutla <lokeshvutla@ti.com>
cc: Rusty Russell <rusty@rustcorp.com.au>
cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
cc: Afzal Mohammed <afzal@ti.com>
cc: linux-crypto@vger.kernel.org
cc: linux-media@vger.kernel.org
cc: linux-mtd@lists.infradead.org
cc: linux-usb@vger.kernel.org
cc: linux-fbdev@vger.kernel.org
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>

This patch moves the notification chain for updates to the device tree
from the powerpc/pseries code to the base OF code. This makes this
functionality available to all architectures.

Additionally the notification chain is updated to allow notifications
for property add/remove/update. To make this work a pointer to a new
struct (of_prop_reconfig) is passed to the routines in the notification chain.
The of_prop_reconfig property contains a pointer to the node containing the
property and a pointer to the property itself. In the case of property
updates, the property pointer refers to the new property.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

struct s3c2410_dma_client gets defined multiple times as it is defined
in more than one header file. Changing it at the header file level causes
many more build breakages as they are interdependent in a complex way.
Hence fixing this problem by using the mach version of the header file.

Without this patch, following build error is observed:
arch/arm/plat-samsung/include/plat/dma-pl330.h:106:27: error:
redefinition of struct s3c2410_dma_client
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The platform_device_id table is supposed to be zero-terminated.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

without it:
|drivers/built-in.o:(.data+0x14588): undefined reference to `crypto_ablkcipher_type'
|drivers/built-in.o:(.data+0x14668): undefined reference to `crypto_ablkcipher_type'

Not sure when this broke.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

clk_put(dd->aes_clk) will dereference an error-valued pointer since the
dd->aes_clk is a ERR_PTR() value. The correct check is call clk_put()
if !IS_ERR(dd->aes_clk).

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Nothing from this file is used, and the file will hopefully be deleted
soon.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

This moves the DMA40 platform data header from <plat/ste_dma40.h>
to <linux/platform_data/dma-ste-dma40.h> where is belongs.

Cc: Dan Williams <djbw@fb.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Andreas Westin <andreas.westin@stericsson.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>