Instead of offset + size keep start and end offset directly.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Dumping the current allocations.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make the suballocator self containing to locking.

v2: split the bugfix into a seperate patch.
v3: remove some unreleated changes.
Sig-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Instead of hacking the calculation multiple times.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some callers illegal called fence_wait_next/empty
while holding the ring emission mutex. So don't
relock the mutex in that cases, and move the actual
locking into the fence code.

v2: Don't try to unlock the mutex if it isn't locked.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Using 64bits fence sequence we can directly compare sequence
number to know if a fence is signaled or not. Thus the fence
list became useless, so does the fence lock that mainly
protected the fence list.

Things like ring.ready are no longer behind a lock, this should
be ok as ring.ready is initialized once and will only change
when facing lockup. Worst case is that we return an -EBUSY just
after a successfull GPU reset, or we go into wait state instead
of returning -EBUSY (thus delaying reporting -EBUSY to fence
wait caller).

v2: Remove left over comment, force using writeback on cayman and
    newer, thus not having to suffer from possibly scratch reg
    exhaustion
v3: Rebase on top of change to uint64 fence patch
v4: Change DCE5 test to force write back on cayman and newer but
    also any APU such as PALM or SUMO family
v5: Rebase on top of new uint64 fence patch
v6: Just break if seq doesn't change any more. Use radeon_fence
    prefix for all function names. Even if it's now highly optimized,
    try avoiding polling to often.
v7: We should never poll the last_seq from the hardware without
    waking the sleeping threads, otherwise we might lose events.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This convert fence to use uint64_t sequence number intention is
to use the fact that uin64_t is big enough that we don't need to
care about wrap around.

Tested with and without writeback using 0xFFFFF000 as initial
fence sequence and thus allowing to test the wrap around from
32bits to 64bits.

v2: Add comment about possible race btw CPU & GPU, add comment
    stressing that we need 2 dword aligned for R600_WB_EVENT_OFFSET
    Read fence sequenc in reverse order of GPU write them so we
    mitigate the race btw CPU and GPU.

v3: Drop the need for ring to emit the 64bits fence, and just have
    each ring emit the lower 32bits of the fence sequence. We
    handle the wrap over 32bits in fence_process.

v4: Just a small optimization: Don't reread the last_seq value
    if loop restarts, since we already know its value anyway.
    Also start at zero not one for seq value and use pre instead
    of post increment in emmit, otherwise wait_empty will deadlock.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A single global mutex for ring submissions seems sufficient.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to sync with the GFX ring as ttm might have schedule bo move
on it and new command scheduled for other ring need to wait for bo
data to be in place.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed by: Christian König <christian.koenig@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

cc1: warning: include/drm: No such file or directory [enabled by default]

It's reproducible if you build with O=/some/obj/dir and W=1.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This was mostly already fixed but this one change is needed to match Kirill's
original submission
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We need this for Poulsbo
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add the opregion support and bring us in line with the opregion functionality in the
reference driver code. We can't share this with i915 currently because there are
hardcoded assumptions about dev_priv etc in both versions.

[airlied: include opregion.h fix]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Before this patch, ACPI_STATE_D3 incorrectly referenced D3hot
in some places, but D3cold in other places.

After this patch, ACPI_STATE_D3 always means ACPI_STATE_D3_COLD;
and all references to D3hot use ACPI_STATE_D3_HOT.

ACPI's _PR3 method is used to enter both D3hot and D3cold states.
What distinguishes D3hot from D3cold is the presence _PR3
(Power Resources for D3hot)  If these resources are all ON,
then the state is D3hot.  If _PR3 is not present,
or all _PR0 resources for the devices are OFF,
then the state is D3cold.

This patch applies after Linux-3.4-rc1.
A future syntax cleanup may remove ACPI_STATE_D3
to emphasize that it always means ACPI_STATE_D3_COLD.
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: NAaron Lu <aaron.lu@amd.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

So that the power button still wakes up the platform.
Signed-off-by: NPierre Tardy <pierre.tardy@intel.com>
Link: http://lkml.kernel.org/r/20120504210244.F2EA5A018B@akpm.mtv.corp.google.comTested-by: NKangkai Yin <kangkai.yin@intel.com>
Tested-by: NYong Wang <yong.y.wang@intel.com>
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Use family rather than DCE check for clarity, also always use
wb on APUs, there will never be AGP variants.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

commit 61a0d80c "md/bitmap: discard CHUNK_BLOCK_SHIFT macro"
replaced CHUNK_BLOCK_RATIO() by the same text that was
replacing CHUNK_BLOCK_SHIFT() - which is clearly wrong.

The result is that 'chunks' is often too small by 1,
which can sometimes result in a crash (not sure how).

So use the correct replacement, and get rid of CHUNK_BLOCK_RATIO
which is no longe used.
Reported-by: NKarl Newman <siliconfiend@gmail.com>
Tested-by: NKarl Newman <siliconfiend@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

Ben Hutchings pointed out that the validation in efivars was inadequate -
most obviously, an entry with size 0 would server as a DoS against the
kernel. Improve this based on his suggestions.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares
ahci_platform driver with other controller versions.

This patch updates DT compatible list for ahci_platform. It also updates and
renames binding documentation to more generic name.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

#ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move
this definition and its usage outside of them.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the
following differences:

 -ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
 -ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
 -ata3: DUMMY
 +ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47
 +ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47
  ata4: DUMMY
  ata5: DUMMY
 -ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47
 +ata6: DUMMY
 +ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47

The change of numbering comes from commit 85d6725b ("libata:
make ata_print_id atomic") that changed lines like

	ap->print_id = ata_print_id++;
		to
	ap->print_id = atomic_inc_return(&ata_print_id);

As the latter behaves like ++ata_print_id, we must initialize
it to zero to start the numbering from one.
Signed-off-by: NTero Roponen <tero.roponen@gmail.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked
once it was detected, but was missing an ahci_pci_tbl entry.

Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard.
Signed-off-by: NMatt Johnson <johnso87@illinois.edu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Commit d9027470("[libata] Add ATA transport class") introduced
ATA_EFLAG_OLD_ER to mark entries in the error ring as cleared.

But ata_count_probe_trials_cb() didn't check this flag and it still
counts the old error history. So wrong probe trials count is returned
and it causes problem, for example, SATA link speed is slowed down from
3.0Gbps to 1.5Gbps.

Fix it by checking ATA_EFLAG_OLD_ER in ata_count_probe_trials_cb().

Cc: stable <stable@vger.kernel.org> # 2.6.37+
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Basically a straight cut/paste from the reference driver code then
cleaned up a spot.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If we set a small text framebuffer and have a bigger scanout then we want
to send black not random bits for the overscan.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We are not yet ready for this and it makes a mess on some devices.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The proper stride value set in mdfld__intel_pipe_set_base().

TODO: move tc35876x support to separate driver and get rid of all
if (mdfld_get_panel_type(dev, pipe) == TC35876X) { ... }
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

While testing with the intel_infoframes tool on gen4, I see that when
video DIP is disabled, what we write to the DATA memory is not exactly
what we read back later.

This regression has been introduce in

commit 64a8fc01
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Sep 22 11:16:00 2011 +0530

    drm/i915: fix ILK+ infoframe support

That commit was setting VIDEO_DIP_CTL to 0 when initializing, which
caused the problem.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43947
Cc: stable@kernel.org
Tested-by: NYang Guang <guang.a.yang@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: Pimped commit message by using the usual commit citation
layout.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We should initialise this to 0 really to avoid getting false positives.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

RV250 found on ppc embedded boards.

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>