commit 664525b2d84abca1074c9546654ae9689de8a818 upstream

The typical 'new_id' attribute behavior is to immediately attach a
device to its driver after a new device-id is added. Implement this
behavior for the dax bus.
Reported-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Reported-by: NBrice Goglin <Brice.Goglin@inria.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 8fc5c73554db0ac18c0c6ac5b2099ab917f83bdf upstream

Persistent memory, as described by the ACPI NFIT (NVDIMM Firmware
Interface Table), is the first known instance of a memory range
described by a unique "target" proximity domain. Where "initiator" and
"target" proximity domains is an approach that the ACPI HMAT
(Heterogeneous Memory Attributes Table) uses to described the unique
performance properties of a memory range relative to a given initiator
(e.g. CPU or DMA device).

Currently the numa-node for a /dev/pmemX block-device or /dev/daxX.Y
char-device follows the traditional notion of 'numa-node' where the
attribute conveys the closest online numa-node. That numa-node attribute
is useful for cpu-binding and memory-binding processes *near* the
device. However, when the memory range backing a 'pmem', or 'dax' device
is onlined (memory hot-add) the memory-only-numa-node representing that
address needs to be differentiated from the set of online nodes. In
other words, the numa-node association of the device depends on whether
you can bind processes *near* the cpu-numa-node in the offline
device-case, or bind process *on* the memory-range directly after the
backing address range is onlined.

Allow for the case that platform firmware describes persistent memory
with a unique proximity domain, i.e. when it is distinct from the
proximity of DRAM and CPUs that are on the same socket. Plumb the Linux
numa-node translation of that proximity through the libnvdimm region
device to namespaces that are in device-dax mode. With this in place the
proposed kmem driver [1] can optionally discover a unique numa-node
number for the address range as it transitions the memory from an
offline state managed by a device-driver to an online memory range
managed by the core-mm.

[1]: https://lore.kernel.org/lkml/20181022201317.8558C1D8@viggo.jf.intel.comReported-by: NFan Du <fan.du@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: NYang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
[yshi: Removed PowerPC stuff which is not applicable 4.19]
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 730926c3b0998943654019f00296cf8e3b02277e upstream

On the expectation that some environments may not upgrade libdaxctl
(userspace component that depends on the /sys/class/dax hierarchy),
provide a default / legacy dax_pmem_compat driver. The dax_pmem_compat
driver implements the original /sys/class/dax sysfs layout rather than
/sys/bus/dax. When userspace is upgraded it can blacklist this module
and switch to the dax_pmem driver going forward.

CONFIG_DEV_DAX_PMEM_COMPAT and supporting code will be deleted according
to the dax_pmem entry in Documentation/ABI/obsolete/.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit d200781ef237a354d918ceff5cee350d88a93d42 upstream

Introduce the 'new_id' concept for enabling a custom device-driver attach
policy for dax-bus drivers. The intended use is to have a mechanism for
hot-plugging device-dax ranges into the page allocator on-demand. With
this in place the default policy of using device-dax for performance
differentiated memory can be overridden by user-space policy that can
arrange for the memory range to be managed as 'System RAM' with
user-defined NUMA and other performance attributes.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 89ec9f2cfa36cc5fca2fb445ed221bb9add7b536 upstream

Move the responsibility of calling devm_request_resource() and
devm_memremap_pages() into the common device-dax driver. This is another
preparatory step to allowing an alternate personality driver for a
device-dax range.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 9567da0b408a2553d32ca83cba4f1fc5a8aad459 upstream

In support of multiple device-dax instances per device-dax-region and
allowing the 'kmem' driver to attach to dax-instances instead of the
current device-node access, convert the dax sub-system from a class to a
bus. Recall that the kmem driver takes reserved / special purpose
memories and assigns them to be managed by the core-mm.

Aside from the fact the device-dax instances are registered and probed
on a bus, two other lifetime-management changes are made:

1/ Delay attaching a cdev until driver probe time

2/ A new run_dax() helper is introduced to allow restoring dax-operation
   after a kill_dax() event. So, at driver ->probe() time we run_dax()
   and at ->remove() time we kill_dax() and invalidate all mappings.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 51cf784c42d07fbd62cb604836a9270cf3361509 upstream

Towards eliminating the dax_class, move the dax-device-attribute
enabling to a new bus.c file in the core. The amount of code
thrash of sub-sequent patches is reduced as no logic changes are made,
just pure code movement.

A temporary export of unregister_dex_dax() and dax_attribute_groups is
needed to preserve compilation, but those symbols become static again in
a follow-on patch.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 753a0850e707e9a8c5861356222f9b9e4eba7945 upstream

The multi-resource implementation anticipated discontiguous sub-division
support. That has not yet materialized, delete the infrastructure and
related code.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 93694f9630b0ed29cda61df58e480dcb34ef52fd upstream

Nothing consumes this attribute of a region and devres otherwise
remembers the value for de-allocation purposes.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 21b9e979501fdb5f6797193d70428a2b00bd5247 upstream

Commit bbb3be17 "device-dax: fix sysfs duplicate warnings" arranged
for passing a dax instance-id to devm_create_dax_dev(), rather than
generating one internally. Remove the dax_region ida and related code.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NYang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: NGavin Shan <shan.gavin@linux.alibaba.com>

commit 3fb4f7cd472c7f5905c91508e988f6b28372210d upstream.

The Intel(R) Speed select technologies contains four features.

Performance profile:An non architectural mechanism that allows multiple
optimized performance profiles per system via static and/or dynamic
adjustment of core count, workload, Tjmax, and TDP, etc. aka ISS
in the documentation.

Base Frequency: Enables users to increase guaranteed base frequency on
certain cores (high priority cores) in exchange for lower base frequency
on remaining cores (low priority cores). aka PBF in the documenation.

Turbo frequency: Enables the ability to set different turbo ratio limits
to cores based on priority. aka FACT in the documentation.

Core power: An Interface that allows user to define per core/tile
priority.

There is a multi level help for commands and options. This can be used
to check required arguments for each feature and commands for the
feature.

To start navigating the features start with

$sudo intel-speed-select --help

For help on a specific feature for example
$sudo intel-speed-select perf-profile --help

To get help for a command for a feature for example
$sudo intel-speed-select perf-profile get-lock-status --help
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: NLen Brown <len.brown@intel.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit f607874f35cbd276a837d7147d4e1ec752dfef44 upstream.

Commands which causes PUNIT writes, store them and restore them on system
resume. The driver stores all such requests in a hash table and stores the
the latest mailbox request parameters. On resume these commands mail box
commands are executed again. There are only 5 such mail box commands which
will trigger such processing so a very low overhead in store and execute
on resume. Also there is no order requirement for mail box commands for
these write/set commands. There is one MSR request for changing turbo
ratio limits, this also stored and get restored on resume and cpu online.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit e765f37b9b8b4fa65682e9a78a2ca2b11d3d9096 upstream.

While using new non arhitectural features using PUNIT Mailbox and MMIO
read/write interface, still there is need to operate using MSRs to
control PUNIT. User space could have used user user-space MSR interface for
this, but when user space MSR access is disabled, then it can't. Here only
limited number of MSRs are allowed using this new interface.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 71b21bd7f68a6ee59003f63d2e4f84fd9b0a8d07 upstream.

Add an IOCTL to send mailbox commands to PUNIT using PUNIT MSRs for
mailbox. Some CPU models don't have PCI device, so need to use MSRs.
A limited set of mailbox commands can be sent to PUNIT.

This MMIO interface is used by the intel-speed-select tool under
tools/x86/power to enumerate and control Intel Speed Select features.
The MBOX commands ids and semantics of the message can be checked from
the source code of the tool.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 31a166fe9c269af17977e650846ee4ea50361c07 upstream.

Add an IOCTL to send mailbox commands to PUNIT using PUNIT PCI device.
A limited set of mailbox commands can be sent to PUNIT.

This MMIO interface is used by the intel-speed-select tool under
tools/x86/power to enumerate and control Intel Speed Select features.
The MBOX commands ids and semantics of the message can be checked from
the source code of the tool.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit d3a23584294c1f379239a3b52bac13e03fecd147 upstream.

Added MMIO interface to read/write specific offsets in PUNIT PCI device
which export core priortization. This MMIO interface can be used using
ioctl interface on /dev/isst_interface using IOCTL ISST_IF_IO_CMD.

This MMIO interface is used by the intel-speed-select tool under
tools/x86/power to enumerate and set core priority. The MMIO offsets and
semantics of the message can be checked from the source code of the tool.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit fb5b36a413b9f30fba573fc2a596ab7142dfaf12 upstream.

Add processing for IOCTL command ISST_IF_GET_PHY_ID. This converts from the
Linux logical CPU to PUNIT CPU numbering scheme.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 8fbfb6fc67819c1274584ff902f7d03aafe38dab upstream.

There are two per CPU data needs to be stored and cached to avoid repeated
MSR readings for accessing them later:

- Physical to logical CPU conversion
The PUNIT uses a different CPU numbering scheme which is not APIC id based.
So we need to establish relationship between PUNIT CPU number and Linux
logical CPU numbering which is based on APIC id. There is an MSR 0x53
(MSR_THREAD_ID), which gets physical CPU number for the local CPU where it
is read. Also the CPU mask in some messages will inform which CPUs needs
to be online/offline for a TDP level. During TDP switch if user offlined
some CPUs, then the physical CPU mask can't be converted as we can't
read MSR on an offlined CPU to go to a lower TDP level by onlining more
CPUs. So the mapping needs to be established at the boot up time.

- Bus number corresponding to a CPU
A group of CPUs are in a control of a PUNIT. The PUNIT device is exported
as PCI device. To do operation on a PUNIT for a CPU, we need to find out
to which PCI device it is related to. This is done by reading MSR 0x128
(MSR_CPU_BUS_NUMBER).

So during CPU online stages the above MSRs are read and stored. Later
this stored information is used to process IOCTLs request from the user
space.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 35f2c14d2a076b063a76c5bf275c46c0743ba3a0 upstream.

Encapsulate common functions which all Intel Speed Select Technology
interface drivers can use. This creates API to register misc device for
user kernel communication and handle all common IOCTLs. As part of the
registry it allows a callback which is to handle domain specific ioctl
processing.

There can be multiple drivers register for services, which can be built
as modules. So this driver handle contention during registry and as well
as during removal. Once user space opened the misc device, the registered
driver will be prevented from removal. Also once misc device is opened by
the user space new client driver can't register, till the misc device is
closed.

There are two types of client drivers, one to handle mail box interface
and the other is to allow direct read/write to some specific MMIO space.

This common driver implements IOCTL ISST_IF_GET_PLATFORM_INFO.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 2ee5bfc1efc81179c73abcd33098dd2c86019146 upstream.

Reserve ioctl numbers for intel Speed Select Technology interface
drivers.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 1dc78f1ffa3a386b986b659884952d816021f38f upstream.

The source ID register offset for Skylake server is 0xf0, while for
Icelake server is 0xf8. Pass the correct offset to get the source ID.
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit c4a1dd9e83ceceef6ffba82b8b274ab9b929ea14 upstream.

The i10nm_edac only checks the ECC enabling status for the first
channel of the memory controller. If there aren't memory DIMMs
populated on the first channel, but at least one DIMM populated
on the second channel, it will wrongly report that the ECC for
the memory controller is disabled that fails to load the i10nm_edac
driver. Fix it by checking ECC enabling status per channel.

[Tony: Also report which channel has ECC disabled]
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 5c5d3ac2064ae2466c81d40186bcc09b2d5b7892 upstream.

Two new CPU models share the same memory controller
architecture with Jacobsville/Tremont, so can use the
same i10nm EDAC driver.

Add ICX and ICX-D CPU model numbers for EDAC support.
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit fe783516e3016652b74ac92fb8b3fc2b1c0e9d5b upstream.

The following Kconfig constellations fail randconfig builds:

  CONFIG_ACPI_NFIT=y
  CONFIG_EDAC_DEBUG=y
  CONFIG_EDAC_SKX=m
  CONFIG_EDAC_I10NM=y

or

  CONFIG_ACPI_NFIT=y
  CONFIG_EDAC_DEBUG=y
  CONFIG_EDAC_SKX=y
  CONFIG_EDAC_I10NM=m

with:
  ...
  CC [M]  drivers/edac/skx_common.o
  ...
  .../skx_common.o:.../skx_common.c:672: undefined reference to `__this_module'

That is because if one of the two drivers - skx_edac or i10nm_edac - is
built-in and the other one is a module, the shared file skx_common.c
gets linked into a module object by kbuild. Therefore, when linking that
same file into vmlinux, the '__this_module' symbol used in debugfs isn't
defined, leading to the above error.

Fix it by moving all debugfs code from skx_common.c to both skx_base.c
and i10nm_base.c respectively. Thus, skx_common.c doesn't refer to the
'__this_module' symbol anymore.

Clarify skx_common.c's purpose at the top of the file for future
reference, while at it.

 [ bp: Make text more readable. ]

Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190321221339.GA32323@agluck-deskSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit cbfa482f7e2becbb774dd30117efac48819252f8 upstream.

A new error code for systems that use DRAM as an extra level of cache
looks like:

    000F 0010 1MMM CCCC

where the MMM and CCCC bits are used for the same purpose as the
original code. For this new class of errors the ADXL translation will
provide details of both the DIMM used as cache for the error location
and the component that is being cached.

Note: This new error code is first supported in Skylake. Older EDAC
drivers do not need to be updated.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190205182109.27828-1-tony.luck@intel.comSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit d4dc89d069aab9074e2493a4c2f3969a0a0b91c1 upstream.

This driver supports the Intel 10nm series server integrated memory
controller. It gets the memory capacity and topology information by
reading the registers in PCI configuration space and memory-mapped I/O.

It decodes the memory error address to the platform specific address
by using the ACPI Address Translation (ADXL) Device Specific Method
(DSM).
Co-developed-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190130191519.15393-5-tony.luck@intel.comSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 98f2fc829e3b55a0ff1b82753fc1e10941535cb9 upstream.

Delete the duplicated code from skx_edac.c and rename skx_edac.c to
skx_base.c. Update the Makefile to build the skx_edac driver from
skx_base.c and skx_common.c.

Add SPDX to skx_base.c and clean out unnecessary #include lines.

 [ bp: Drop the license boilerplate - there's an SPDX identifier now. ]
Co-developed-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190130191519.15393-4-tony.luck@intel.comSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 24c9d423e86b17b25b4b510e81f10aa232fdaa60 upstream.

It was previously noted that Kconfig complained about unmet dependencies
when trying to configure skx_edac together with CONFIG_ACPI=n. First fix
for this checked for ACPI when doing

  select ACPI_ADXL

but this required stub functions for the case where ACPI wasn't
selected. It also allowed building a driver that didn't actually work
for a system that has non-volatile DIMMs.

Arnd Bergmann pointed out that the right fix is to make EDAC_SKX
"depend on ACPI".

Fixes: a324e9396ca3 ("EDAC, skx: Fix randconfig builds")
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
CC: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Mauro Carvalho Chehab <mchehab@kernel.org>
CC: linux-edac <linux-edac@vger.kernel.org>
CC: qiuxu.zhuo@intel.com
Link: http://lkml.kernel.org/r/20181106183914.GA26731@agluck-desk
[ caspar: resolve merge conflict manually ]
Signed-off-by: NCaspar Zhang <caspar@linux.alibaba.com>
Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

commit 4cf841e398503990df640f7a7c5b2ea56f11c08c upstream.

Some new Intel servers provide an interface so that the OS can ask the
BIOS to translate a system physical address to a memory address (socket,
memory controller, channel, rank, dimm, etc.). This is useful for EDAC
drivers that want to take the address of an error reported in a machine
check bank and let the user know which DIMM may need to be replaced.

Specification for this interface is available at:

  https://cdrdv2.intel.com/v1/dl/getContent/603354

 [ Based on earlier code by Qiuxu Zhuo <qiuxu.zhuo@intel.com>. ]

 [ bp: Make the first pr_info() in adxl_init() pr_debug() so that it
   doesn't pollute every dmesg. ]
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
CC: Len Brown <lenb@kernel.org>
CC: linux-acpi@vger.kernel.org
CC: linux-edac@vger.kernel.org
Link: http://lkml.kernel.org/r/20181015202620.23610-1-tony.luck@intel.comSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 88a242c9874044740ab990d4fccba8bb90cb924b upstream.

Parts of skx_edac can be shared with the Intel 10nm server EDAC driver.

Carve out the common parts from skx_edac in preparation to support both
skx_edac driver and i10nm_edac drivers.
Co-developed-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190130191519.15393-3-tony.luck@intel.comSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 3231a21d5ca6f6baea95588406775304f35a203e upstream.

Add ICX-D support in intel_rapl driver
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit cceb1d9dfa680e8b0f5d70d87c2ee25903070b96 upstream.

Add ICX support in intel_rapl driver
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NRajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 0ab74bcd1b50821391b264150d26b7f03ba6740b upstream.

Add IceLake desktop support in intel_rapl driver
Signed-off-by: NGayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: NJoe Konno <joe.konno@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit abcfaeb3f5dc8bded4ba446eb2fb017a7a41d9bc upstream.

intel_rapl driver used to have a list of cpuids, which is used to
1. check if the processor support RAPL MSRs
2. do some cpu model specific setting
3. module autoloading

Now, the cpu model specific setting are moved to intel_rapl_common.c as
part of the common code, because the setup is also needed by RAPL MMIO
interface on those platforms.
But removing the cpuid list from intel_rapl MSR interface driver results
in that the driver can not be loaded automatically.

Maintaining another copy of the cpuid list in intel_rapl_msr.c does not make
sense because it increases the complexity when enabling RAPL support on a
new cpu model.

Fix the problem by creating an "intel_rapl_msr" platform device in the
common code, and make RAPL MSR interface driver (intel_rapl_msr.c) probe the
platform device directly.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 0c2ddedd8bcb88c4100acb9e0fc5ac8752d09501 upstream.

RAPL MSR interface supports 2 power limits for package domain, and 1 power
limit for other domains, while RAPL MMIO interface supports 2 power limits
for both package and dram domains.
And when 2 power limits are supported, the FW_LOCK bit is in bit 63 of the
register, instead of bit 31.

Remove the assumption that only pakcage domain supports 2 power limits.
And allow the RAPL interface driver to specify the number of power limits
supported, for every single RAPL domain it owns..
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit d978e755aabe215cb67bf713e103ed3916ec306d upstream.

RAPL MMIO interface uses 64 bit registers, thus force use 64 bit register
for all the RAPL code.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 3382388d714891fc0f575926189f33d22e7c960b upstream.

Split intel_rapl.c to intel_rapl_common.c and intel_rapl_msr.c, where
intel_rapl_common.c contains the common code that can be used by both MSR
and MMIO interface.
intel_rapl_msr.c contains the implementation of RAPL MSR interface.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 00ae831dfe4474ef6029558f5eb3ef0332d80043 upstream.

Add the Atom Tremont model number to the Intel family list.

[ Tony: Also update comment at head of file to say "_X" suffix is
  also used for microserver parts. ]
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NQiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Megha Dey <megha.dey@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190125195902.17109-4-tony.luck@intel.comSigned-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 1193b1658d16f03cdb2edbac5f2a796ccca225af upstream.

There are still some places in the common code that have hardcoded
MSR access, convert them to follow the abstracted register access.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>

commit 8a00676cd690941c9a18bd390c3b2cade631c516 upstream.

Previously, there are three functions:
rapl_register_psys(), which registers platform rapl domain.
rapl_register_powercap(), which registers powercap control type.
rapl_unregsiter_powercap(), which unregisters platform rapl domain and
powercap control type.

This is confusing as the function name does not describe what it does
clearly.

With this patch, the three functions are removed, and two new functions
rapl_register_platform_domain()/rapl_unregister_platform_domain() are
introduced instead, and they do exactly what their function name describes.

Plus, as part of the common code, hardcoded MSR accesses in these functions
are converted to follow the abstracted register access.
Reviewed-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Tested-by: NPandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NCaspar Zhang <caspar@linux.alibaba.com>