The device indicates the result of a read/write operation by making the
status available on a subsequent request from the driver.  This is not
ready immediately, though, so the driver is currently slamming the
device with hundreds of pointless requests before getting the expected
response.  Add a two millisecond delay before each attempt.  This is
approximately the behavior observed with version 4.2.7.1 of the Windows
driver.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Provide a unique name for each driver instead of using "line6usb" for
all of them.  This will allow for different configurations based on the
driver type.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

line6_start_timer passes an unsigned int as argument to be used in mod_timer
which is then used by mod_timer as unsigned long, this just fixes up the
argument type. This change helps make static code checkers happy.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Most of them are rather relevant with the definitions in driver.h,
and there are only a few lines, so just rip it off.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The definition is no longer used.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just reformatting the comments and typos fixed, no functional
changes.  Particularly,
- avoid the kerneldoc marker "/**",
- reduce multiple comment lines into single lines,
- corrected wrongly referred function names
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move the check of multi configurations before snd_card_new() as a
short path, and reduce superfluous pointer references.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of allocating the private data individually in each driver's
probe at first, let snd_card_new() allocate the data that is called in
line6_probe().  This simplifies the primary probe functions.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The interface argument is used just for retrieving the assigned
device, which can be already found in line6->ifcdev.  Drop them from
the callbacks.  Also, pass the usb id to private_init so that the
driver can deal with it there.  This is a preliminary work for the
further cleanup to move the whole allocation into driver.c.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The function isn't used any longer after rewriting from sysfs to leds
class in toneport.c.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix memory leak at probe error path by rearranging the call order in
line6_destruct() so that the common destructor is always called.
Also this simplifies the error path to a single goto label.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split some codes in the lengthy line6_probe().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Currently disconnect callback is used as a driver's destructor, and
this has to be called not only at the disconnection time but also at
the error paths during probe.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's utterly unsafe to proceed further the disconnect procedure if the
assigned usbdev is inconsistent with the expected object.  Better to
put a WARN_ON() for more cautions and abort immediately.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... in line6_disconnect() as well.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver version string was removed in an ealier commit for being
useless.  These are equally useless.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The correct spelling includes the space.  Fix this in strings and
comments that refer to the manufacturer.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Both functions are used nowhere.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's used only locally.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Call line6_pcm_disconnect() at disconnect to make sure that all URBs
are cleared.  Also reduce the superfluous snd_pcm_stop() calls from
the function (and remove the unused function) since the streams are
guaranteed to be stopped at this point via snd_card_disconnect().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Calling line6_pcm_disconnect() at suspend callback is superfluous and
rather confusing.  Let's get rid of it.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is rather useless for a driver that has been already merged into
the official tree.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a fairly big rewrite regarding the card resource management in
line6 drivers:

- The card creation is moved into line6_probe().  This adds the global
  destructor to private_free, so that each driver doesn't have to call
  it any longer.

- The USB disconnect callback handles the card release, thus each
  driver needs to concentrate on only its own resources.  No need to
  snd_card_*() call in the destructor.

- Fix the potential stall in disconnection by removing
  snd_card_free().   It's replaced with snd_card_free_when_closed()
  for asynchronous release.

- The only remaining operation for the card in each driver is the call
  of snd_card_register().  All the rest are dealt in the common module
  by itself.

- These ended up with removal of audio.[ch] as a result of a reduction
  of one layer.  Each driver just needs to call line6_probe().
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Kernel already shows the error in the common path.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's non-standard and rather superfluous.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split to each individual driver for POD, PODHD, TonePort and Variax
with a core LINE6 helper module.  The new modules follow the standard
ALSA naming rule with snd prefix: snd-usb-pod, snd-usb-podhd,
snd-usb-toneport and snd-usb-variax, together with the corresponding
CONFIG_SND_USB_* Kconfig items.
Tested-by: NChris Rorvick <chris@rorvick.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change, refactoring with the standard helpers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Promote line6 driver from staging to sound/usb/line6 directory, and
maintain through sound subsystem tree.

This commit just moves the code and adapts Makefile / Kconfig.
The further renames and misc cleanups will follow.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Which *_disconnect() to call on disconnect is known at initialization.
Add a function pointer to the `usb_line6' struct and use to call into
the appropriate logic instead of evaluating the conditional logic.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Which *_process_message() function (if any) to call when data is
received is known at initialization.  Add a function pointer to the
`usb_line6' struct and use to call into the appropriate logic instead
of evaluating the conditional logic for each message.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read.  This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Casting the `struct usb_line6' pointer at the call point makes the code
difficult to read.  This is substantially cleaned up by moving the cast
into the callees.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the addresses of the
audio endpoints for the interface.  Drop the conditional logic and make
these values properties.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the addresses of the
control endpoints for the interface.  Drop the conditional logic and
make these values properties.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device type can now be used to determine the altsetting for the
interface.  Drop the conditional logic and make this value a property.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver only supports interface 0 of the TonePort UX2 and POD Studio
UX2 devices.  Use the device table to filter on this.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver only supports interface 1 of the Pocket POD.  Use the device
table to filter on this.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver uses a different altsetting depending on the interface.  Add
device type entries for each of these.
Signed-off-by: NChris Rorvick <chris@rorvick.com>
Reviewed-by: NStefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>