Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
11 个月 前同步成功

通知 150
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 21 3月, 2012 1 次提交
    • O
      exit_signal: simplify the "we have changed execution domain" logic · e6368253
      由 Oleg Nesterov 提交于 
      exit_notify() checks "tsk->self_exec_id != tsk->parent_exec_id"
to handle the "we have changed execution domain" case.

We can change do_thread() to always set ->exit_signal = SIGCHLD
and remove this check to simplify the code.

We could change setup_new_exec() instead, this looks more logical
because it increments ->self_exec_id. But note that de_thread()
already resets ->exit_signal if it changes the leader, let's keep
both changes close to each other.

Note that we change ->exit_signal lockless, this changes the rules.
Thereafter ->exit_signal is not stable under tasklist but this is
fine, the only possible change is OLDSIG -> SIGCHLD. This can race
with eligible_child() but the race is harmless. We can race with
reparent_leader() which changes our ->exit_signal in parallel, but
it does the same change to SIGCHLD.

The noticeable user-visible change is that the execing task is not
"visible" to do_wait()->eligible_child(__WCLONE) right after exec.
To me this looks more logical, and this is consistent with mt case.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e6368253
  3. 06 3月, 2012 2 次提交
  5. 23 2月, 2012 1 次提交
    • D
      tracepoint, vfs, sched: Add exec() tracepoint · 4ff16c25
      由 David Smith 提交于 
      Added a minimal exec tracepoint. Exec is an important major event
in the life of a task, like fork(), clone() or exit(), all of
which we already trace.

[ We also do scheduling re-balancing during exec() - so it's useful
  from a scheduler instrumentation POV as well. ]

If you want to watch a task start up, when it gets exec'ed is a good place
to start.  With the addition of this tracepoint, exec's can be monitored
and better picture of general system activity can be obtained. This
tracepoint will also enable better process life tracking, allowing you to
answer questions like "what process keeps starting up binary X?".

This tracepoint can also be useful in ftrace filtering and trigger
conditions: i.e. starting or stopping filtering when exec is called.
Signed-off-by: NDavid Smith <dsmith@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F314D19.7030504@redhat.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
      4ff16c25
  7. 07 2月, 2012 1 次提交
    • H
      exec: fix use-after-free bug in setup_new_exec() · 96e02d15
      由 Heiko Carstens 提交于 
      Setting the task name is done within setup_new_exec() by accessing
bprm->filename. However this happens after flush_old_exec().
This may result in a use after free bug, flush_old_exec() may
"complete" vfork_done, which will wake up the parent which in turn
may free the passed in filename.
To fix this add a new tcomm field in struct linux_binprm which
contains the now early generated task name until it is used.

Fixes this bug on s390:

  Unable to handle kernel pointer dereference at virtual kernel address 0000000039768000
  Process kworker/u:3 (pid: 245, task: 000000003a3dc840, ksp: 0000000039453818)
  Krnl PSW : 0704000180000000 0000000000282e94 (setup_new_exec+0xa0/0x374)
  Call Trace:
  ([<0000000000282e2c>] setup_new_exec+0x38/0x374)
   [<00000000002dd12e>] load_elf_binary+0x402/0x1bf4
   [<0000000000280a42>] search_binary_handler+0x38e/0x5bc
   [<0000000000282b6c>] do_execve_common+0x410/0x514
   [<0000000000282cb6>] do_execve+0x46/0x58
   [<00000000005bce58>] kernel_execve+0x28/0x70
   [<000000000014ba2e>] ____call_usermodehelper+0x102/0x140
   [<00000000005bc8da>] kernel_thread_starter+0x6/0xc
   [<00000000005bc8d4>] kernel_thread_starter+0x0/0xc
  Last Breaking-Event-Address:
   [<00000000002830f0>] setup_new_exec+0x2fc/0x374

  Kernel panic - not syncing: Fatal exception: panic_on_oops
Reported-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      96e02d15
  9. 11 1月, 2012 1 次提交
    • K
      tracepoint: add tracepoints for debugging oom_score_adj · 43d2b113
      由 KAMEZAWA Hiroyuki 提交于 
      oom_score_adj is used for guarding processes from OOM-Killer.  One of
problem is that it's inherited at fork().  When a daemon set oom_score_adj
and make children, it's hard to know where the value is set.

This patch adds some tracepoints useful for debugging. This patch adds
3 trace points.
  - creating new task
  - renaming a task (exec)
  - set oom_score_adj

To debug, users need to enable some trace pointer. Maybe filtering is useful as

# EVENT=/sys/kernel/debug/tracing/events/task/
# echo "oom_score_adj != 0" > $EVENT/task_newtask/filter
# echo "oom_score_adj != 0" > $EVENT/task_rename/filter
# echo 1 > $EVENT/enable
# EVENT=/sys/kernel/debug/tracing/events/oom/
# echo 1 > $EVENT/enable

output will be like this.
# grep oom /sys/kernel/debug/tracing/trace
bash-7699  [007] d..3  5140.744510: oom_score_adj_update: pid=7699 comm=bash oom_score_adj=-1000
bash-7699  [007] ...1  5151.818022: task_newtask: pid=7729 comm=bash clone_flags=1200011 oom_score_adj=-1000
ls-7729  [003] ...2  5151.818504: task_rename: pid=7729 oldcomm=bash newcomm=ls oom_score_adj=-1000
bash-7699  [002] ...1  5175.701468: task_newtask: pid=7730 comm=bash clone_flags=1200011 oom_score_adj=-1000
grep-7730  [007] ...2  5175.701993: task_rename: pid=7730 oldcomm=bash newcomm=grep oom_score_adj=-1000
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      43d2b113
  11. 04 1月, 2012 1 次提交
  13. 01 11月, 2011 1 次提交
    • D
      oom: remove oom_disable_count · c9f01245
      由 David Rientjes 提交于 
      This removes mm->oom_disable_count entirely since it's unnecessary and
currently buggy.  The counter was intended to be per-process but it's
currently decremented in the exit path for each thread that exits, causing
it to underflow.

The count was originally intended to prevent oom killing threads that
share memory with threads that cannot be killed since it doesn't lead to
future memory freeing.  The counter could be fixed to represent all
threads sharing the same mm, but it's better to remove the count since:

 - it is possible that the OOM_DISABLE thread sharing memory with the
   victim is waiting on that thread to exit and will actually cause
   future memory freeing, and

 - there is no guarantee that a thread is disabled from oom killing just
   because another thread sharing its mm is oom disabled.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reported-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c9f01245
  15. 12 8月, 2011 1 次提交
    • V
      move RLIMIT_NPROC check from set_user() to do_execve_common() · 72fa5997
      由 Vasiliy Kulikov 提交于 
      The patch http://lkml.org/lkml/2003/7/13/226 introduced an RLIMIT_NPROC
check in set_user() to check for NPROC exceeding via setuid() and
similar functions.

Before the check there was a possibility to greatly exceed the allowed
number of processes by an unprivileged user if the program relied on
rlimit only.  But the check created new security threat: many poorly
written programs simply don't check setuid() return code and believe it
cannot fail if executed with root privileges.  So, the check is removed
in this patch because of too often privilege escalations related to
buggy programs.

The NPROC can still be enforced in the common code flow of daemons
spawning user processes.  Most of daemons do fork()+setuid()+execve().
The check introduced in execve() (1) enforces the same limit as in
setuid() and (2) doesn't create similar security issues.

Neil Brown suggested to track what specific process has exceeded the
limit by setting PF_NPROC_EXCEEDED process flag.  With the change only
this process would fail on execve(), and other processes' execve()
behaviour is not changed.

Solar Designer suggested to re-check whether NPROC limit is still
exceeded at the moment of execve().  If the process was sleeping for
days between set*uid() and execve(), and the NPROC counter step down
under the limit, the defered execve() failure because NPROC limit was
exceeded days ago would be unexpected.  If the limit is not exceeded
anymore, we clear the flag on successful calls to execve() and fork().

The flag is also cleared on successful calls to set_user() as the limit
was exceeded for the previous user, not the current one.

Similar check was introduced in -ow patches (without the process flag).

v3 - clear PF_NPROC_EXCEEDED on successful calls to set_user().
Reviewed-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Acked-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      72fa5997
  17. 27 7月, 2011 7 次提交
  19. 22 7月, 2011 1 次提交
    • O
      ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever · eac1b5e5
      由 Oleg Nesterov 提交于 
      Test-case:

	void *tfunc(void *arg)
	{
		execvp("true", NULL);
		return NULL;
	}

	int main(void)
	{
		int pid;

		if (fork()) {
			pthread_t t;

			kill(getpid(), SIGSTOP);

			pthread_create(&t, NULL, tfunc, NULL);

			for (;;)
				pause();
		}

		pid = getppid();
		assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0);

		while (wait(NULL) > 0)
			ptrace(PTRACE_CONT, pid, 0,0);

		return 0;
	}

It is racy, exit_notify() does __wake_up_parent() too. But in the
likely case it triggers the problem: de_thread() does release_task()
and the old leader goes away without the notification, the tracer
sleeps in do_wait() without children/tracees.

Change de_thread() to do __wake_up_parent(traced_leader->parent).
Since it is already EXIT_DEAD we can do this without ptrace_unlink(),
EXIT_DEAD threads do not exist from do_wait's pov.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>
      eac1b5e5
  21. 20 7月, 2011 1 次提交
  23. 02 7月, 2011 1 次提交
  25. 28 6月, 2011 1 次提交
    • O
      redefine thread_group_leader() as exit_signal >= 0 · 087806b1
      由 Oleg Nesterov 提交于 
      Change de_thread() to set old_leader->exit_signal = -1. This is
good for the consistency, it is no longer the leader and all
sub-threads have exit_signal = -1 set by copy_process(CLONE_THREAD).

And this allows us to micro-optimize thread_group_leader(), it can
simply check exit_signal >= 0. This also makes sense because we
should move ->group_leader from task_struct to signal_struct.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NTejun Heo <tj@kernel.org>
      087806b1
  27. 23 6月, 2011 2 次提交
    • T
      ptrace: kill clone/exec tracehooks · 4b9d33e6
      由 Tejun Heo 提交于 
      At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following clone and exec related tracehooks.

	tracehook_prepare_clone()
	tracehook_finish_clone()
	tracehook_report_clone()
	tracehook_report_clone_complete()
	tracehook_unsafe_exec()

The changes are mostly trivial - logic is moved to the caller and
comments are merged and adjusted appropriately.

The only exception is in check_unsafe_exec() where LSM_UNSAFE_PTRACE*
are OR'd to bprm->unsafe instead of setting it, which produces the
same result as the field is always zero on entry.  It also tests
p->ptrace instead of (p->ptrace & PT_PTRACED) for consistency, which
also gives the same result.

This doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
      4b9d33e6
    • T
      ptrace: kill trivial tracehooks · a288eecc
      由 Tejun Heo 提交于 
      At this point, tracehooks aren't useful to mainline kernel and mostly
just add an extra layer of obfuscation.  Although they have comments,
without actual in-kernel users, it is difficult to tell what are their
assumptions and they're actually trying to achieve.  To mainline
kernel, they just aren't worth keeping around.

This patch kills the following trivial tracehooks.

* Ones testing whether task is ptraced.  Replace with ->ptrace test.

	tracehook_expect_breakpoints()
	tracehook_consider_ignored_signal()
	tracehook_consider_fatal_signal()

* ptrace_event() wrappers.  Call directly.

	tracehook_report_exec()
	tracehook_report_exit()
	tracehook_report_vfork_done()

* ptrace_release_task() wrapper.  Call directly.

	tracehook_finish_release_task()

* noop

	tracehook_prepare_release_task()
	tracehook_report_death()

This doesn't introduce any behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
      a288eecc
  29. 18 6月, 2011 1 次提交
    • D
      KEYS/DNS: Fix ____call_usermodehelper() to not lose the session keyring · 87966996
      由 David Howells 提交于 
      ____call_usermodehelper() now erases any credentials set by the
subprocess_inf::init() function.  The problem is that commit
17f60a7d ("capabilites: allow the application of capability limits
to usermode helpers") creates and commits new credentials with
prepare_kernel_cred() after the call to the init() function.  This wipes
all keyrings after umh_keys_init() is called.

The best way to deal with this is to put the init() call just prior to
the commit_creds() call, and pass the cred pointer to init().  That
means that umh_keys_init() and suchlike can modify the credentials
_before_ they are published and potentially in use by the rest of the
system.

This prevents request_key() from working as it is prevented from passing
the session keyring it set up with the authorisation token to
/sbin/request-key, and so the latter can't assume the authority to
instantiate the key.  This causes the in-kernel DNS resolver to fail
with ENOKEY unconditionally.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NEric Paris <eparis@redhat.com>
Tested-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      87966996
  31. 16 6月, 2011 2 次提交
  33. 10 6月, 2011 1 次提交
    • M
      exec: delay address limit change until point of no return · dac853ae
      由 Mathias Krause 提交于 
      Unconditionally changing the address limit to USER_DS and not restoring
it to its old value in the error path is wrong because it prevents us
using kernel memory on repeated calls to this function.  This, in fact,
breaks the fallback of hard coded paths to the init program from being
ever successful if the first candidate fails to load.

With this patch applied switching to USER_DS is delayed until the point
of no return is reached which makes it possible to have a multi-arch
rootfs with one arch specific init binary for each of the (hard coded)
probed paths.

Since the address limit is already set to USER_DS when start_thread()
will be invoked, this redundancy can be safely removed.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dac853ae
  35. 05 6月, 2011 3 次提交
    • T
      job control: make task_clear_jobctl_pending() clear TRAPPING automatically · 6dfca329
      由 Tejun Heo 提交于 
      JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to
(re)transit into TRACED.  task_clear_jobctl_pending() must be called
when either tracee enters TRACED or the transition is cancelled for
some reason.  The former is achieved by explicitly calling
task_clear_jobctl_pending() in ptrace_stop() and the latter by calling
it at the end of do_signal_stop().

Calling task_clear_jobctl_trapping() at the end of do_signal_stop()
limits the scope TRAPPING can be used and is fragile in that seemingly
unrelated changes to tracee's control flow can lead to stuck TRAPPING.

We already have task_clear_jobctl_pending() calls on those cancelling
events to clear JOBCTL_STOP_PENDING.  Cancellations can be handled by
making those call sites use JOBCTL_PENDING_MASK instead and updating
task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is
called automatically if no stop/trap is pending.

This patch makes the above changes and removes the fallback
task_clear_jobctl_trapping() call from do_signal_stop().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
      6dfca329
    • T
      job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() · 3759a0d9
      由 Tejun Heo 提交于 
      This patch introduces JOBCTL_PENDING_MASK and replaces
task_clear_jobctl_stop_pending() with task_clear_jobctl_pending()
which takes an extra @mask argument.

JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but
future patches will add more bits.  recalc_sigpending_tsk() is updated
to use JOBCTL_PENDING_MASK instead.

task_clear_jobctl_pending() takes @mask which in subset of
JOBCTL_PENDING_MASK and clears the relevant jobctl bits.  If
JOBCTL_STOP_PENDING is set, other STOP bits are cleared together.  All
task_clear_jobctl_stop_pending() users are updated to call
task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is
functionally identical to task_clear_jobctl_stop_pending().

This patch doesn't cause any functional change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
      3759a0d9
    • T
      job control: rename signal->group_stop and flags to jobctl and update them · a8f072c1
      由 Tejun Heo 提交于 
      signal->group_stop currently hosts mostly group stop related flags;
however, it's gonna be used for wider purposes and the GROUP_STOP_
flag prefix becomes confusing.  Rename signal->group_stop to
signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*.

Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are
defined in terms of them to allow using bitops later.

While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate
future additions.

This doesn't cause any functional change.

-v2: JOBCTL_*_BIT macros added as suggested by Linus.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
      a8f072c1
  37. 27 5月, 2011 2 次提交
    • J
      coredump: add support for exe_file in core name · 57cc083a
      由 Jiri Slaby 提交于 
      Now, exe_file is not proc FS dependent, so we can use it to name core
file.  So we add %E pattern for core file name cration which extract path
from mm_struct->exe_file.  Then it converts slashes to exclamation marks
and pastes the result to the core file name itself.

This is useful for environments where binary names are longer than 16
character (the current->comm limitation).  Also where there are binaries
with same name but in a different path.  Further in case the binery itself
changes its current->comm after exec.

So by doing (s/$/#/ -- # is treated as git comment):

  $ sysctl kernel.core_pattern='core.%p.%e.%E'
  $ ln /bin/cat cat45678901234567890
  $ ./cat45678901234567890
  ^Z
  $ rm cat45678901234567890
  $ fg
  ^\Quit (core dumped)
  $ ls core*

we now get:

  core.2434.cat456789012345.!root!cat45678901234567890 (deleted)
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      57cc083a
    • J
      mm: extract exe_file handling from procfs · 38646013
      由 Jiri Slaby 提交于 
      Setup and cleanup of mm_struct->exe_file is currently done in fs/proc/.
This was because exe_file was needed only for /proc/<pid>/exe.  Since we
will need the exe_file functionality also for core dumps (so core name can
contain full binary path), built this functionality always into the
kernel.

To achieve that move that out of proc FS to the kernel/ where in fact it
should belong.  By doing that we can make dup_mm_exe_file static.  Also we
can drop linux/proc_fs.h inclusion in fs/exec.c and kernel/fork.c.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      38646013
  39. 25 5月, 2011 2 次提交
    • P
      mm: mmu_gather rework · d16dfc55
      由 Peter Zijlstra 提交于 
      Rework the existing mmu_gather infrastructure.

The direct purpose of these patches was to allow preemptible mmu_gather,
but even without that I think these patches provide an improvement to the
status quo.

The first 9 patches rework the mmu_gather infrastructure.  For review
purpose I've split them into generic and per-arch patches with the last of
those a generic cleanup.

The next patch provides generic RCU page-table freeing, and the followup
is a patch converting s390 to use this.  I've also got 4 patches from
DaveM lined up (not included in this series) that uses this to implement
gup_fast() for sparc64.

Then there is one patch that extends the generic mmu_gather batching.

After that follow the mm preemptibility patches, these make part of the mm
a lot more preemptible.  It converts i_mmap_lock and anon_vma->lock to
mutexes which together with the mmu_gather rework makes mmu_gather
preemptible as well.

Making i_mmap_lock a mutex also enables a clean-up of the truncate code.

This also allows for preemptible mmu_notifiers, something that XPMEM I
think wants.

Furthermore, it removes the new and universially detested unmap_mutex.

This patch:

Remove the first obstacle towards a fully preemptible mmu_gather.

The current scheme assumes mmu_gather is always done with preemption
disabled and uses per-cpu storage for the page batches.  Change this to
try and allocate a page for batching and in case of failure, use a small
on-stack array to make some progress.

Preemptible mmu_gather is desired in general and usable once i_mmap_lock
becomes a mutex.  Doing it before the mutex conversion saves us from
having to rework the code by moving the mmu_gather bits inside the
pte_lock.

Also avoid flushing the tlb batches from under the pte lock, this is
useful even without the i_mmap_lock conversion as it significantly reduces
pte lock hold times.

[akpm@linux-foundation.org: fix comment tpyo]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NHugh Dickins <hughd@google.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d16dfc55
    • M
      mm: make expand_downwards() symmetrical with expand_upwards() · d05f3169
      由 Michal Hocko 提交于 
      Currently we have expand_upwards exported while expand_downwards is
accessible only via expand_stack or expand_stack_downwards.

check_stack_guard_page is a nice example of the asymmetry.  It uses
expand_stack for VM_GROWSDOWN while expand_upwards is called for
VM_GROWSUP case.

Let's clean this up by exporting both functions and make those names
consistent.  Let's use expand_{upwards,downwards} because expanding
doesn't always involve stack manipulation (an example is
ia64_do_page_fault which uses expand_upwards for registers backing store
expansion).  expand_downwards has to be defined for both
CONFIG_STACK_GROWS{UP,DOWN} because get_arg_page calls the downwards
version in the early process initialization phase for growsup
configuration.
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d05f3169
  41. 14 5月, 2011 1 次提交
  43. 09 4月, 2011 4 次提交
  45. 23 3月, 2011 1 次提交
    • T
      signal: Use GROUP_STOP_PENDING to stop once for a single group stop · 39efa3ef
      由 Tejun Heo 提交于 
      Currently task->signal->group_stop_count is used to decide whether to
stop for group stop.  However, if there is a task in the group which
is taking a long time to stop, other tasks which are continued by
ptrace would repeatedly stop for the same group stop until the group
stop is complete.

Conversely, if a ptraced task is in TASK_TRACED state, the debugger
won't get notified of group stops which is inconsistent compared to
the ptraced task in any other state.

This patch introduces GROUP_STOP_PENDING which tracks whether a task
is yet to stop for the group stop in progress.  The flag is set when a
group stop starts and cleared when the task stops the first time for
the group stop, and consulted whenever whether the task should
participate in a group stop needs to be determined.  Note that now
tasks in TASK_TRACED also participate in group stop.

This results in the following behavior changes.

* For a single group stop, a ptracer would see at most one stop
  reported.

* A ptracee in TASK_TRACED now also participates in group stop and the
  tracer would get the notification.  However, as a ptraced task could
  be in TASK_STOPPED state or any ptrace trap could consume group
  stop, the notification may still be missing.  These will be
  addressed with further patches.

* A ptracee may start a group stop while one is still in progress if
  the tracer let it continue with stop signal delivery.  Group stop
  code handles this correctly.

Oleg:

* Spotted that a task might skip signal check even when its
  GROUP_STOP_PENDING is set.  Fixed by updating
  recalc_sigpending_tsk() to check GROUP_STOP_PENDING instead of
  group_stop_count.

* Pointed out that task->group_stop should be cleared whenever
  task->signal->group_stop_count is cleared.  Fixed accordingly.

* Pointed out the behavior inconsistency between TASK_TRACED and
  RUNNING and the last behavior change.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
      39efa3ef
  47. 21 3月, 2011 1 次提交
    • H
      Small typo fix... · 1bef8291
      由 Holger Hans Peter Freyther 提交于 
      Hi,

I was backporting the coredump over pipe feature and noticed this small typo,
I wish I would have something bigger to contribute...

>From 15d6080e0ed4267da103c706917a33b1015e8804 Mon Sep 17 00:00:00 2001
From: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Date: Thu, 24 Feb 2011 17:42:50 +0100
Subject: [PATCH] fs: Fix a small typo in the comment

The function is called umh_pipe_setup not uhm_pipe_setup.
Signed-off-by: NHolger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      1bef8291