Emacs warns if an otherwise empty line starts with a tab.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

With the current way of generating the Makefile in the output directory
for builds outside of the source tree, specifying real targets (rather
than phony ones) doesn't work in an already (partially) built tree, as
the stub Makefile doesn't have any dependency information available.
Thus, all targets where files may actually exist must be listed
explicitly and, due to what I'd call a make misbehavior, directory
targets must then also be special cased.
Signed-Off-By: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

While the recent change to also escape # symbols when storing C-file
compilation command lines was helpful, it should be in effect for all
command lines, as much as the dollar escaping should be in effect for
C-source compilation commands. Additionally, for better readability and
maintenance, consolidating all the escaping (single quotes, dollars,
and now sharps) was also desirable.
Signed-Off-By: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Move $(CC) support functions to Kbuild.include so they are available
in the kbuild files.
In addition the following was done:
	o as-option documented in Documentation/kbuild/makefiles.txt
	o Moved documentation to new section to match
	  new scope of functions
	o added cc-ifversion used to conditionally select a text string
	  dependent on actual $(CC) version
	o documented cc-ifversion
	o change so Kbuild.include is read before the kbuild file
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Section mismatch is identified as references to .init*
sections from non .init sections. And likewise references
to .exit.* sections outside .exit sections.

.init.* sections are discarded after a module is initialized
and references to .init.* sections are oops candidates.
.exit.* sections are discarded when a module is built-in and
thus references to .exit are also oops candidates.

The checks were possible to do using 'make buildcheck' which
called the two perl scripts: reference_discarded.pl and
reference_init.pl. This patch just moves the same functionality
inside modpost and the scripts are then obsoleted.
They will though be kept for a while so users can do double
checks - but note that some .o files are skipped by the perl scripts
so result is not 1:1.
All credit for the concept goes to Keith Owens who implemented
the original perl scrips - this patch just moves it to modpost.

Compared to the perl script the implmentation in modpost will be run
for each kernel build - thus catching the error much sooner, but
the downside is that the individual .o file are not always identified.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Following patch enables depmod support when installing external modules.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

To avoid stale modules located in $(MODVERDIR) aka .tmp_versions/
always delete the directory when building an external module.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

uname -m on MIPS can give a number of results, such as mips64.  We
need to add another substitution to the sed call for SUBARCH in the
main Makefile.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This matches the fix for a bug seen on x86-64.  Test booted on old hardware
that had 32 byte cachelines to begin with.
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

In modpost introduce a check for symbols exported twice.
This check caught only one victim (inet_bind_bucket_create) for
which a patch is already sent to netdev.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

With following patch a second option is enabled to obtain
symbol information from a second external module when a
external module is build.
The recommended approach is to use a common kbuild file but
that may be impractical in certain cases.
With this patch one can copy over a Module.symvers from one
external module to make symbols (and symbol versions) available
for another external module.

Updated documentation in Documentation/kbuild/modules.txt
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Just some light CodingStyle updates - no functional changes.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

modpost.c provides warn() and fatal() - so use them all over the place.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Support building individual files when dealing with separate modules.
So say you have a module named "foo" which consist of two .o files bar.o
and fun.o.

You can then do:
make -C $KERNELSRC M=`pwd` bar.o
make -C $KERNELSRC M=`pwd` bar.lst
make -C $KERNELSRC M=`pwd` bar.i
make -C $KERNELSRC M=`pwd` /            <= will build all .o files
                                           and link foo.o
make -C $KERNELSRC M=`pwd` foo.ko       <= will build the module
                                           and do the modpost step
					   to create foo.ko

The above will also work if the external module is placed in a
subdirectory using a hirachy of kbuild files.
Thanks to Andreas Gruenbacher <agruen@suse.de> for initial feature
request / bug report.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

acpi_rs_get_list_length() needs to account for all the vendor-defined data
bytes.  Failing to include these causes buffers to be sized too small,
which causes slab corruption when we later convert AML to resources and run
off the end of the buffer.

This causes slab corruption on machines that use ACPI vendor-defined
resources.  All HP ia64 machines do, and I'm told that some NEC machines
may as well.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sure maxnodes is safe size before calculating nlongs in
get_nodes().
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I got all of these backwards.  We want to return

	min(input timeout, new timeout)

to userspace to prevent increasing the time-remaining value.

Thanks to Ernst Herzberg <earny@net4u.de> for reporting and diagnosing.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

One of the parameters to the __pud_free_tlb() macro for powerpc is
incorrect (see patch) .  We get away with it by accident, because the one
place the macro is called, the second parameter is a variable named "pud".
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Don't print KERN_INFO in the middle of a printk line.
	printk(KERN_INFO "OEM ID: %s ",str);
is just above this. This is already fixed up in i386 copy.
Signed-off-by: NMartin J. Bligh <mbligh@google.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The windfarm_pm112 module relies on smu_sat_get_sdb_partition which is in
windfarm_smu_sat.c but is not exported to modules, so despite Kconfig
having the option to build the pm112 as modules, this can never be loaded.

This patch fixes that by exporting smu_sat_get_sdb_partition with
EXPORT_SYMBOL_GPL
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's a rather theoretical case of the BUG triggering in
fuse_reset_request():

  - iget() fails because of OOM after a successful CREATE_OPEN request
  - during IO on the resulting RELEASE request the connection is aborted

Fix and add warning to fuse_reset_request().
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Restore the compatibility with the older code and make it possible to
suspend if the kernel command line doesn't contain the "resume=" argument
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Just rename the compat system call to keep the name consistent with all the
other *64 compat system calls.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix assignment instead of check in ccw_device_set_online().  Also remove
unneeded assignment in ccw_device_do_sense().
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The last changes that introduced the additional_cpus command line parameter
also introduced a regression regarding smp initialization speed.  In
smp_setup_cpu_possible_map() cpu_present_map is set to the same value as
cpu_possible_map.  Especially that means that bits in the present map will be
set for cpus that are not present.  This will cause a slow down in the initial
cpu_up() loop in smp_init() since trying to take cpus online that aren't
present takes a while.

Fix this by setting only bits for present cpus in cpu_present_map and set
cpu_present_map to cpu_possible_map in smp_cpus_done().
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce possible_cpus command line option.  Hard sets the number of bits set
in cpu_possible_map.  Unlike the additional_cpus parameter this one guarantees
that num_possible_cpus() will stay constant even if the system gets rebooted
and a different number of cpus are present at startup.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce additional_cpus command line option.  By default no additional cpu
can be attached to the system anymore.  Only the cpus present at IPL time can
be switched on/off.  If it is desired that additional cpus can be attached to
the system the maximum number of additional cpus needs to be specified with
this option.

This change is necessary in order to limit the waste of per_cpu data
structures.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set preempt_count of idle_thread to zero before switching off cpu.  Otherwise
the preempt_count will be wrong if the cpu is switched on again since the
thread will be reused.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If __ccw_device_disband_start() fails to initiate disbanding, it should finish
with ccw_device_disband_done() (which leaves the device in offline state)
instead of ccw_device_verify_done() (which leaves the device in online state).
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Heiko Carstens <heiko.carstens@de.ibm.com> wrote:

  The boot sequence on s390 sometimes takes ages and we spend a very long
  time (up to one or two minutes) in calibrate_migration_costs.  The time
  spent there differs from boot to boot.  Also the calculated costs differ
  a lot.  I've seen differences by up to a factor of 15 (yes, factor not
  percent).  Also I doubt that making these measurements make much sense on
  a completely virtualized architecture where you cannot tell how much cpu
  time you will get anyway.

So introduce the CONFIG_DEFAULT_MIGRATION_COST method for an architecture
to set the scheduler migration costs.  This turns off automatic detection
of migration costs.  Makes sense on virtual platforms, where migration
costs are hard to measure accurately.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Jean-Luc Leger <reiga@dspnet.fr.eu.org> found this obvious typo.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix IO-port leakage from request_region in case of error during TPM
initialization, adds more pnp-verification and fixes a WTX-bug.
Signed-off-by: NMarcel Selhorst <selhorst@crypto.rub.de>
Acked-by: NKylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a deadlock possible in the ext2 file system implementation.  This
deadlock occurs when a file is removed from an ext2 file system which was
mounted with the "sync" mount option.

The problem is that ext2_xattr_delete_inode() was invoking the routine,
sync_dirty_buffer(), using a buffer head which was previously locked via
lock_buffer().  The first thing that sync_dirty_buffer() does is to lock
the buffer head that it was passed.  It does this via lock_buffer().  Oops.

The solution is to unlock the buffer head in ext2_xattr_delete_inode()
before invoking sync_dirty_buffer().  This makes the code in
ext2_xattr_delete_inode() obey the same locking rules as all other callers
of sync_dirty_buffer() in the ext2 file system implementation.
Signed-off-by: NPeter Staubach <staubach@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

 - Fix the array index value in ata_rwcmd_protocol() for the added FUA commands.
 - Filter out ATAPI packet command error messages in ata_pio_error()
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

* libata does not care about error interrupts, so handle them locally
* the interrupts that are ignored only appear to happen at init time
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Change the find_next_best_node algorithm to correctly skip
over holes in the node online mask. Previously it would not handle
missing nodes correctly and cause crashes at boot.

[Written by Linus, tested by AK]
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>