The sense of the IF bit is backwards in the host interrupt handling.

This means we always save "IF=1" on the stack when injecting an
interrupt.  It turns out this is almost always correct (unless the
guest is taking a page fault in an interrupt due to an unpopulated
vmalloc mapping), so went unnoticed.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix afs_send_simple_reply() to accept a greater-than-zero return value from
rxrpc_kernel_send_data() as being a successful return rather than thinking it
an error and aborting the call.

rxrpc_kernel_send_data() previously returned zero incorrectly when it worked
successfully, but has been patched to return the number of bytes it
transmitted.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits)
  sh: intc - add support for SH7750 and its variants
  sh: Move entry point code to .text.head.
  sh: heartbeat: Shut up resource size warning.
  sh: update r2d defconfig and fix SH7751R pci compliation
  sh: Many symbol exports for nommu allmodconfig.
  sh: zero terminate 8250 platform data for r2d board
  sh: cpufreq: Fix up the build for SH-2.
  sh: Make on-chip DMA channel selection explicit.
  sh: Fix up CPU dependencies for on-chip DMAC.
  sh: cpufreq: clock framework support.
  sh: Support rate rounding for SH7722 FRQCR clocks.
  sh: Implement clk_round_rate() in the clock framework.
  sh: Fix up PCI section mismatch warnings.
  sh: Wire up fallocate() syscall.
  sh: intc - add support for 7780
  sh: intc - improve group support
  sh: Fix up SH-3 and SH-4 driver dependencies.
  sh: push-switch: Correct license string.
  sh: cpufreq: Fix driver dependencies and flag as broken.
  sh: IPR/INTC2 IRQ setup consolidation.
  ...

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (102 commits)
  [ALSA] version 1.0.14
  [ALSA] remove duplicate Logitech Quickcam USB ID in usbquirks.h
  [ALSA] hda-codec - Fix input with STAC92xx
  [ALSA] hda-intel: support for iMac 24'' released on 09/2006
  [ALSA] hda-codec - Add quirk for Asus P5LD2
  [ALSA] snd-ca0106: Add support for X-Fi Extreme Audio.
  [ALSA] snd-emu10k1:Enable E-Mu 1616m notebook firmware loading.
  [ALSA] snd-emu10k1: Initial support for E-Mu 1616 and 1616m.
  [ALSA] cs46xx - Fix PM resume
  [ALSA] hda: Enable SPDIF in/out on some stac9205 boards
  [ALSA] timer: check for incorrect device state in non-debug compiles, too
  [ALSA] snd-aoa-codec-onyx: fix typo
  [ALSA] hda-codec - Add quirks for HP dx2200/dx2250
  [ALSA] hda-codec - Rename HP model-specific quirks
  [ALSA] hda-codec - Add quirk for HP Samba
  [ALSA] hda-codec - Add LG LW20 line-in capture source
  [ALSA] usb-audio - Fix AC3 with M-Audio Audiophile USB
  [ALSA] hda: stac9202 mixer fix
  [ALSA] Make s3c24xx_i2s_set_clkdiv() change the correct bits
  [ALSA] hda-codec - Add LG LW20 si3054 modem id
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: Flag sh64_get_page() as __init_refok.
  sh64: Move entry point code to .text.head.
  sh64: Fix up PCI section mismatch warnings.
  sh64: Update cayman defconfig.
  sh64: Wire up fallocate() syscall.

* 'cfq' of git://git.kernel.dk/data/git/linux-2.6-block:
  cfq: Write-only stuff in CFQ data structures
  cfq: async queue allocation per priority

Update arm to use bitwise types for its VM_FAULT_ constants.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (29 commits)
  libata: implement EH fast drain
  libata: schedule probing after SError access failure during autopsy
  libata: clear HOTPLUG flag after a reset
  libata: reorganize ata_ehi_hotplugged()
  libata: improve SCSI scan failure handling
  libata: quickly trigger SATA SPD down after debouncing failed
  libata: improve SATA PHY speed down logic
  The SATA controller device ID is different according to
  ahci: implement SCR_NOTIFICATION r/w
  ahci: make NO_NCQ handling more consistent
  libata: make ->scr_read/write callbacks return error code
  libata: implement AC_ERR_NCQ
  libata: improve EH report formatting
  sata_sil24: separate out sil24_do_softreset()
  sata_sil24: separate out sil24_exec_polled_cmd()
  sata_sil24: replace sil24_update_tf() with sil24_read_tf()
  ahci: separate out ahci_do_softreset()
  ahci: separate out ahci_exec_polled_cmd()
  ahci: separate out ahci_kick_engine()
  ahci: use deadline instead of fixed timeout for 1st FIS for SRST
  ...

I recently ran Lindent over the AdvanSys driver and it moved the
comments on #else and #endif lines way over to the right:

	#else                          /* ADVANSYS_DEBUG */

This doesn't match what I expect from kernel style, but it is
documented.  We just need another flag to indent to make this look like:

	#else /* ADVANSYS_DEBUG */
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Coverity found a memory leak in tpm_ascii_bios_measurements_open().

If "read_log(log)" fails, then we may leak 'log' and
'log->bios_event_log'.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: Seiji Munetoh <munetoh@jp.ibm.com>
Cc: Stefan Berger <stefanb@us.ibm.com>
Cc: Reiner Sailer <sailer@watson.ibm.com>
Cc: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reformat show_cpuinfo() to be consistent with normal coding style
(and rest of this file).
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Coverity checker noticed that we allocate too little storage for
"struct cr_panel *crp" in cr_backlight_probe().
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: Thomas Hellstrom <thomas@tungstengraphics.com>
Cc: Alan Hourihane <alanh@tungstengraphics.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andrew Morton:
	[async_memcpy] is very wrong if both ASYNC_TX_KMAP_DST and
	ASYNC_TX_KMAP_SRC can ever be set.  We'll end up using the same kmap
	slot for both src add dest and we get either corrupted data or a BUG.

Evgeniy Polyakov:
	Btw, shouldn't it always be kmap_atomic() even if flag is not set.
	That pages are usual one returned by alloc_page().

So fix the usage of kmap_atomic and kill the ASYNC_TX_KMAP_DST and
ASYNC_TX_KMAP_SRC flags.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix page index to offset conversion overflows in buffer layer, ecryptfs,
and ocfs2.

It would be nice to convert the whole tree to page_offset, but for now
just fix the bugs.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zone_movable_pfn is presently marked as __initdata and referenced from
adjust_zone_range_for_zone_movable(), which in turn is referenced by
zone_spanned_pages_in_node().  Both of these are __meminit annotated.  When
memory hotplug is enabled, this will oops on a hot-add, due to
zone_movable_pfn having been freed.

__meminitdata annotation gives the desired behaviour.

This will only impact platforms that enable both memory hotplug
and ARCH_POPULATES_NODE_MAP.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Every file should include the headers containing the prototypes for
its global functions.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One of the nice ideas behind paravirt is that CONFIG_XEN=y can be included
in a standard configuration and be no worse for native booting than as a
Xen guest.  The glibc feature that supports the vDSO "nosegneg" note is
designed specifically to make this easy.  You just have to flip one bit at
boot time.  This patch makes Xen flip the bit, so a CONFIG_XEN=y kernel on
bare hardware does not make glibc use the less-optimized library builds.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Acked-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix two year old bug in early bootup asm.
  [SPARC64]: Update defconfig.
  [SPARC64]: Fix log message type in vio_create_one().
  [SPARC64]: Tweak assertions in sun4v_build_virq().
  [SPARC64]: Tweak kernel log messages in power_probe().
  [SPARC64]: Fix handling of multiple vdc-port nodes.
  [SPARC64]: Fix device type matching in VIO's devspec_show().
  [SPARC64]: Fix MODULE_DEVICE_TABLE() specification in VDC and VNET.
  [SPARC]: Add sys_fallocate() entries.
  [SPARC64]: Use orderly_poweroff().

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (44 commits)
  USB: drivers/usb/storage/dpcm.c whitespace cleanup
  USB: r8a66597-hcd: fixes some problem
  USB: change name of spinlock in hcd.c
  USB: move routines in hcd.c
  USB: misc: uss720: clean up urb->status usage
  USB: misc: usbtest: clean up urb->status usage
  USB: misc: usblcd: clean up urb->status usage
  USB: misc: phidgetmotorcontrol: clean up urb->status usage
  USB: misc: phidgetkit: clean up urb->status usage
  USB: misc: legousbtower: clean up urb->status usage
  USB: misc: ldusb: clean up urb->status usage
  USB: misc: iowarrior: clean up urb->status usage
  USB: misc: ftdi-elan: clean up urb->status usage
  USB: misc: auerswald: clean up urb->status usage
  USB: misc: appledisplay: clean up urb->status usage
  USB: misc: adtux: clean up urb->status usage
  USB: core: message: clean up urb->status usage
  USB: image: microtek: clean up urb->status usage
  USB: image: mdc800: clean up urb->status usage
  USB: storage: onetouch: clean up urb->status usage
  ...

	Since we have use like ~SLUB_DMA, we ought to have the type
set right in both cases.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

	It's C, not C++...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

	It's void __user *, not void * __user...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

	Doing |= 1 << 19 to 16bit unsigned is not particulary useful;
that register is 32bit, unlike the ones dealt with in the rest of
function, so we need u32 variable here.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Wrong order of arguments
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

anything that wants working dma-mapping won't work
parport_pc won't work on m68k unless we have ISA
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i.e. tell modpost that entry point code (that has to be outside
of .init.text for external reasons) is OK to refer to .init.*
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In most cases, when EH is scheduled, all in-flight commands are
aborted causing EH to kick in immediately.  However, in some cases
(especially with PMP), it's unclear which commands are affected by the
error condition and although aborting all in-flight commands work, it
isn't optimal and may cause unnecessary disruption.  On the other
hand, waiting for in-flight commands to drain themselves can take up
to 30seconds.

This patch implements EH fast drain to handle such situations.  It
gives in-flight commands some time to finish up but doesn't wait for
too long.  After EH is scheduled, fast drain timer is started and if
no other completion occurs in ATA_EH_FASTDRAIN_INTERVAL all in-flight
commands are aborted.  If any completion occurred in the interval, the
port is given another interval to finish up itself.

Currently ATA_EH_FASTDRAIN_INTERVAL is 3 secs which should be enough
for finishing up most commands.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

If SError isn't accessible, EH can't tell whether hotplug has happened
or not.  Report SError read failure with AC_ERR_OTHER and schedule
probing with hardreset.  This will be mainly useful for PMPs.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

ATA_EHI_HOTPLUGGED is a hint for reset functions indicating the the
port might have gone through hotplug/unplug just before entering EH.
Reset functions modify their behaviors a bit to handle the situation
better - e.g. using longer debouncing delay.

Currently, once HOTPLUG is set, it isn't cleared till the end of EH.
This is unnecessary and makes EH take longer.  Clear the HOTPLUGGED
flag after a reset try (successful or not).
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

__ata_ehi_hotplugged() now has no users.  Regorganize
ata_ehi_hotplugged() such that a new function ata_ehi_schedule_probe()
deals with scheduling probing.  ata_ehi_hotplugged() calls it and
additionally marks hotplug specific flags.  ata_ehi_schedule_probe()
will be used laster.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

SCSI scan may fail due to memory allocation failure even if EH is not
in progress.  Due to use of GFP_ATOMIC in SCSI scan path, allocation
failure isn't too rare especially while probing multiple devices at
once which is the case when a bunch of devices are connected to PMP.

This patch moves SCSI scan failure detetion logic from
ata_scsi_hotplug() to ata_scsi_scan_host() and implement synchronous
scan behavior.  The synchronous path sleeps briefly and repeats SCSI
scan if some devices aren't attached properly.  It contains robust
retry loop to minimize the chance of device misdetection during boot
and falls back to async retry if everything fails.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Debouncing failure is a good indicator of basic link problem.  Use
-EPIPE to indicate debouncing failure and make ata_eh_reset() invoke
sata_down_spd_limit() if the error occurs during reset.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>