Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 03 3月, 2018 5 次提交
  3. 22 2月, 2018 5 次提交
    • E
      crypto: speck - add test vectors for Speck64-XTS · 41b3316e
      由 Eric Biggers 提交于 
      Add test vectors for Speck64-XTS, generated in userspace using C code.
The inputs were borrowed from the AES-XTS test vectors, with key lengths
adjusted.

xts-speck64-neon passes these tests.  However, they aren't currently
applicable for the generic XTS template, as that only supports a 128-bit
block size.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      41b3316e
    • E
      crypto: speck - add test vectors for Speck128-XTS · c3bb521b
      由 Eric Biggers 提交于 
      Add test vectors for Speck128-XTS, generated in userspace using C code.
The inputs were borrowed from the AES-XTS test vectors.

Both xts(speck128-generic) and xts-speck128-neon pass these tests.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      c3bb521b
    • E
      crypto: speck - export common helpers · c8c36413
      由 Eric Biggers 提交于 
      Export the Speck constants and transform context and the ->setkey(),
->encrypt(), and ->decrypt() functions so that they can be reused by the
ARM NEON implementation of Speck-XTS.  The generic key expansion code
will be reused because it is not performance-critical and is not
vectorizable, while the generic encryption and decryption functions are
needed as fallbacks and for the XTS tweak encryption.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      c8c36413
    • E
      crypto: speck - add support for the Speck block cipher · da7a0ab5
      由 Eric Biggers 提交于 
      Add a generic implementation of Speck, including the Speck128 and
Speck64 variants.  Speck is a lightweight block cipher that can be much
faster than AES on processors that don't have AES instructions.

We are planning to offer Speck-XTS (probably Speck128/256-XTS) as an
option for dm-crypt and fscrypt on Android, for low-end mobile devices
with older CPUs such as ARMv7 which don't have the Cryptography
Extensions.  Currently, such devices are unencrypted because AES is not
fast enough, even when the NEON bit-sliced implementation of AES is
used.  Other AES alternatives such as Twofish, Threefish, Camellia,
CAST6, and Serpent aren't fast enough either; it seems that only a
modern ARX cipher can provide sufficient performance on these devices.

This is a replacement for our original proposal
(https://patchwork.kernel.org/patch/10101451/) which was to offer
ChaCha20 for these devices.  However, the use of a stream cipher for
disk/file encryption with no space to store nonces would have been much
more insecure than we thought initially, given that it would be used on
top of flash storage as well as potentially on top of F2FS, neither of
which is guaranteed to overwrite data in-place.

Speck has been somewhat controversial due to its origin.  Nevertheless,
it has a straightforward design (it's an ARX cipher), and it appears to
be the leading software-optimized lightweight block cipher currently,
with the most cryptanalysis.  It's also easy to implement without side
channels, unlike AES.  Moreover, we only intend Speck to be used when
the status quo is no encryption, due to AES not being fast enough.

We've also considered a novel length-preserving encryption mode based on
ChaCha20 and Poly1305.  While theoretically attractive, such a mode
would be a brand new crypto construction and would be more complicated
and difficult to implement efficiently in comparison to Speck-XTS.

There is confusion about the byte and word orders of Speck, since the
original paper doesn't specify them.  But we have implemented it using
the orders the authors recommended in a correspondence with them.  The
test vectors are taken from the original paper but were mapped to byte
arrays using the recommended byte and word orders.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      da7a0ab5
    • C
      crypto: testmgr - Fix incorrect values in PKCS#1 test vector · 333e18c5
      由 Conor McLoughlin 提交于 
      The RSA private key for the first form should have
version, prime1, prime2, exponent1, exponent2, coefficient
values 0.
With non-zero values for prime1,2, exponent 1,2 and coefficient
the Intel QAT driver will assume that values are provided for the
private key second form. This will result in signature verification
failures for modules where QAT device is present and the modules
are signed with rsa,sha256.

Cc: <stable@vger.kernel.org>
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NConor McLoughlin <conor.mcloughlin@intel.com>
Reviewed-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      333e18c5
  5. 15 2月, 2018 5 次提交
  7. 12 2月, 2018 1 次提交
    • L
      vfs: do bulk POLL* -> EPOLL* replacement · a9a08845
      由 Linus Torvalds 提交于 
      This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a9a08845
  9. 08 2月, 2018 2 次提交
  11. 25 1月, 2018 6 次提交
  13. 20 1月, 2018 1 次提交
  15. 12 1月, 2018 15 次提交
    • E
      crypto: x86/salsa20 - cleanup and convert to skcipher API · c9a3ff8f
      由 Eric Biggers 提交于 
      Convert salsa20-asm from the deprecated "blkcipher" API to the
"skcipher" API, in the process fixing it up to use the generic helpers.
This allows removing the salsa20_keysetup() and salsa20_ivsetup()
assembly functions, which aren't performance critical; the C versions do
just fine.

This also fixes the same bug that salsa20-generic had, where the state
array was being maintained directly in the transform context rather than
on the stack or in the request context.  Thus, if multiple threads used
the same Salsa20 transform concurrently they produced the wrong results.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      c9a3ff8f
    • E
      crypto: salsa20 - export generic helpers · eb772f37
      由 Eric Biggers 提交于 
      Export the Salsa20 constants, transform context, and initialization
functions so that they can be reused by the x86 implementation.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      eb772f37
    • E
      crypto: salsa20-generic - cleanup and convert to skcipher API · b62b3db7
      由 Eric Biggers 提交于 
      Convert salsa20-generic from the deprecated "blkcipher" API to the
"skcipher" API, in the process fixing it up to be thread-safe (as the
crypto API expects) by maintaining each request's state separately from
the transform context.

Also remove the unnecessary cra_alignmask and tighten validation of the
key size by accepting only 16 or 32 bytes, not anything in between.

These changes bring the code close to the way chacha20-generic does
things, so hopefully it will be easier to maintain in the future.

However, the way Salsa20 interprets the IV is still slightly different;
that was not changed.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      b62b3db7
    • A
      crypto: aes-generic - build with -Os on gcc-7+ · 148b974d
      由 Arnd Bergmann 提交于 
      While testing other changes, I discovered that gcc-7.2.1 produces badly
optimized code for aes_encrypt/aes_decrypt. This is especially true when
CONFIG_UBSAN_SANITIZE_ALL is enabled, where it leads to extremely
large stack usage that in turn might cause kernel stack overflows:

crypto/aes_generic.c: In function 'aes_encrypt':
crypto/aes_generic.c:1371:1: warning: the frame size of 4880 bytes is larger than 2048 bytes [-Wframe-larger-than=]
crypto/aes_generic.c: In function 'aes_decrypt':
crypto/aes_generic.c:1441:1: warning: the frame size of 4864 bytes is larger than 2048 bytes [-Wframe-larger-than=]

I verified that this problem exists on all architectures that are
supported by gcc-7.2, though arm64 in particular is less affected than
the others. I also found that gcc-7.1 and gcc-8 do not show the extreme
stack usage but still produce worse code than earlier versions for this
file, apparently because of optimization passes that generally provide
a substantial improvement in object code quality but understandably fail
to find any shortcuts in the AES algorithm.

Possible workarounds include

a) disabling -ftree-pre and -ftree-sra optimizations, this was an earlier
   patch I tried, which reliably fixed the stack usage, but caused a
   serious performance regression in some versions, as later testing
   found.

b) disabling UBSAN on this file or all ciphers, as suggested by Ard
   Biesheuvel. This would lead to massively better crypto performance in
   UBSAN-enabled kernels and avoid the stack usage, but there is a concern
   over whether we should exclude arbitrary files from UBSAN at all.

c) Forcing the optimization level in a different way. Similar to a),
   but rather than deselecting specific optimization stages,
   this now uses "gcc -Os" for this file, regardless of the
   CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE/SIZE option. This is a reliable
   workaround for the stack consumption on all architecture, and I've
   retested the performance results now on x86, cycles/byte (lower is
   better) for cbc(aes-generic) with 256 bit keys:

			-O2     -Os
	gcc-6.3.1	14.9	15.1
	gcc-7.0.1	14.7	15.3
	gcc-7.1.1	15.3	14.7
	gcc-7.2.1	16.8	15.9
	gcc-8.0.0	15.5	15.6

This implements the option c) by enabling forcing -Os on all compiler
versions starting with gcc-7.1. As a workaround for PR83356, it would
only be needed for gcc-7.2+ with UBSAN enabled, but since it also shows
better performance on gcc-7.1 without UBSAN, it seems appropriate to
use the faster version here as well.

Side note: during testing, I also played with the AES code in libressl,
which had a similar performance regression from gcc-6 to gcc-7.2,
but was three times slower overall. It might be interesting to
investigate that further and possibly port the Linux implementation
into that.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83356
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83651
Cc: Richard Biener <rguenther@suse.de>
Cc: Jakub Jelinek <jakub@gcc.gnu.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      148b974d
    • E
      crypto: aead - prevent using AEADs without setting key · dc26c17f
      由 Eric Biggers 提交于 
      Similar to what was done for the hash API, update the AEAD API to track
whether each transform has been keyed, and reject encryption/decryption
if a key is needed but one hasn't been set.

This isn't quite as important as the equivalent fix for the hash API
because AEADs always require a key, so are unlikely to be used without
one.  Still, tracking the key will prevent accidental unkeyed use.
algif_aead also had to track the key anyway, so the new flag replaces
that and slightly simplifies the algif_aead implementation.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      dc26c17f
    • E
      crypto: skcipher - prevent using skciphers without setting key · f8d33fac
      由 Eric Biggers 提交于 
      Similar to what was done for the hash API, update the skcipher API to
track whether each transform has been keyed, and reject
encryption/decryption if a key is needed but one hasn't been set.

This isn't as important as the equivalent fix for the hash API because
symmetric ciphers almost always require a key (the "null cipher" is the
only exception), so are unlikely to be used without one.  Still,
tracking the key will prevent accidental unkeyed use.  algif_skcipher
also had to track the key anyway, so the new flag replaces that and
simplifies the algif_skcipher implementation.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      f8d33fac
    • E
      crypto: ghash - remove checks for key being set · 4e1d14bc
      由 Eric Biggers 提交于 
      Now that the crypto API prevents a keyed hash from being used without
setting the key, there's no need for GHASH to do this check itself.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      4e1d14bc
    • E
      crypto: hash - prevent using keyed hashes without setting key · 9fa68f62
      由 Eric Biggers 提交于 
      Currently, almost none of the keyed hash algorithms check whether a key
has been set before proceeding.  Some algorithms are okay with this and
will effectively just use a key of all 0's or some other bogus default.
However, others will severely break, as demonstrated using
"hmac(sha3-512-generic)", the unkeyed use of which causes a kernel crash
via a (potentially exploitable) stack buffer overflow.

A while ago, this problem was solved for AF_ALG by pairing each hash
transform with a 'has_key' bool.  However, there are still other places
in the kernel where userspace can specify an arbitrary hash algorithm by
name, and the kernel uses it as unkeyed hash without checking whether it
is really unkeyed.  Examples of this include:

    - KEYCTL_DH_COMPUTE, via the KDF extension
    - dm-verity
    - dm-crypt, via the ESSIV support
    - dm-integrity, via the "internal hash" mode with no key given
    - drbd (Distributed Replicated Block Device)

This bug is especially bad for KEYCTL_DH_COMPUTE as that requires no
privileges to call.

Fix the bug for all users by adding a flag CRYPTO_TFM_NEED_KEY to the
->crt_flags of each hash transform that indicates whether the transform
still needs to be keyed or not.  Then, make the hash init, import, and
digest functions return -ENOKEY if the key is still needed.

The new flag also replaces the 'has_key' bool which algif_hash was
previously using, thereby simplifying the algif_hash implementation.
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      9fa68f62
    • E
      crypto: hash - annotate algorithms taking optional key · a208fa8f
      由 Eric Biggers 提交于 
      We need to consistently enforce that keyed hashes cannot be used without
setting the key.  To do this we need a reliable way to determine whether
a given hash algorithm is keyed or not.  AF_ALG currently does this by
checking for the presence of a ->setkey() method.  However, this is
actually slightly broken because the CRC-32 algorithms implement
->setkey() but can also be used without a key.  (The CRC-32 "key" is not
actually a cryptographic key but rather represents the initial state.
If not overridden, then a default initial state is used.)

Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which
indicates that the algorithm has a ->setkey() method, but it is not
required to be called.  Then set it on all the CRC-32 algorithms.

The same also applies to the Adler-32 implementation in Lustre.

Also, the cryptd and mcryptd templates have to pass through the flag
from their underlying algorithm.

Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      a208fa8f
    • E
      crypto: poly1305 - remove ->setkey() method · a16e772e
      由 Eric Biggers 提交于 
      Since Poly1305 requires a nonce per invocation, the Linux kernel
implementations of Poly1305 don't use the crypto API's keying mechanism
and instead expect the key and nonce as the first 32 bytes of the data.
But ->setkey() is still defined as a stub returning an error code.  This
prevents Poly1305 from being used through AF_ALG and will also break it
completely once we start enforcing that all crypto API users (not just
AF_ALG) call ->setkey() if present.

Fix it by removing crypto_poly1305_setkey(), leaving ->setkey as NULL.

Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      a16e772e
    • E
      crypto: mcryptd - pass through absence of ->setkey() · fa59b92d
      由 Eric Biggers 提交于 
      When the mcryptd template is used to wrap an unkeyed hash algorithm,
don't install a ->setkey() method to the mcryptd instance.  This change
is necessary for mcryptd to keep working with unkeyed hash algorithms
once we start enforcing that ->setkey() is called when present.

Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      fa59b92d
    • E
      crypto: cryptd - pass through absence of ->setkey() · 841a3ff3
      由 Eric Biggers 提交于 
      When the cryptd template is used to wrap an unkeyed hash algorithm,
don't install a ->setkey() method to the cryptd instance.  This change
is necessary for cryptd to keep working with unkeyed hash algorithms
once we start enforcing that ->setkey() is called when present.

Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      841a3ff3
    • E
      crypto: hash - introduce crypto_hash_alg_has_setkey() · cd6ed77a
      由 Eric Biggers 提交于 
      Templates that use an shash spawn can use crypto_shash_alg_has_setkey()
to determine whether the underlying algorithm requires a key or not.
But there was no corresponding function for ahash spawns.  Add it.

Note that the new function actually has to support both shash and ahash
algorithms, since the ahash API can be used with either.

Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      cd6ed77a
    • C
      crypto: tcrypt - free xoutbuf instead of axbuf · c6ba4f3e
      由 Colin Ian King 提交于 
      There seems to be a cut-n-paste bug with the name of the buffer being
free'd, xoutbuf should be used instead of axbuf.

Detected by CoverityScan, CID#1463420 ("Copy-paste error")

Fixes: 427988d9 ("crypto: tcrypt - add multibuf aead speed test")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      c6ba4f3e
    • C
      crypto: tcrypt - fix spelling mistake: "bufufer"-> "buffer" · 38dbe2d1
      由 Colin Ian King 提交于 
      Trivial fix to spelling mistakes in pr_err error message text.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      38dbe2d1