- 23 3月, 2014 4 次提交
-
-
由 Sean Paul 提交于
This patch removes the apply() manager callback in favor of putting the relevant commits in the individual drivers. This will mitigate some of the difference between the suspend/resume path and the dpms path Signed-off-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sean Paul 提交于
This patch implements the initialize callback in the hdmi and mixer manager. This allows us to get rid of drm_dev in the drm_hdmi level and track it in the mixer and hdmi drivers. This is one of the things holding back the complete removal of the drm_hdmi layer. Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Shirish S 提交于
Now that the drm_display_mode also provides aspect ratio for all resolutions, this patch adds its usage to set the active aspect ratio of AVI info frame packets as per CEA-861-D standard's Table 9. This is also needed to abide by the 7-27 compliance test of HDMI. Signed-off-by: NShirish S <s.shirish@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Shirish S 提交于
This patch adds support for the below mentioned pixel clocks in Exynos5250. Without them, following display modes won¡¯t be supported: 71 MHz - 1280x800@60Hz RB 73.25 MHz - 800x600@120Hz RB 88.75 MHz - 1440x900@60Hz RB 115.5 MHz - 1024x768@120Hz RB 119 MHz - 1680x1050@60Hz RB Signed-off-by: NShirish S <s.shirish@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 07 2月, 2014 1 次提交
-
-
由 Sachin Kamat 提交于
Remove local definitions and use the ones provided by hdmi.h. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 05 9月, 2013 3 次提交
-
-
由 Sachin Kamat 提交于
Since commit 383ffda2 ("ARM: EXYNOS: no more support non-DT for EXYNOS SoCs"), Exynos platform is DT only. Hence remove all the conditional macros and make the driver DT only. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sachin Kamat 提交于
kzalloc already has built-in error messages. Hence remove additional ones. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sachin Kamat 提交于
Add of.h explicitly for of_* APIs. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 30 7月, 2013 1 次提交
-
-
由 Sachin Kamat 提交于
Remove module.h header file inclusion from files since they do not use/refer to any code from that file. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 28 6月, 2013 9 次提交
-
-
由 Rahul Sharma 提交于
This patch adds new combatible strings for hdmi, mixer, ddc and hdmiphy. It follows the convention of using compatible string which represent the SoC in which the IP was added for the first time. Drivers continue to support the previous compatible strings but further addition of these compatible strings in device tree is deprecated. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Reviewed-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
Modified code for calculating hdmi IP register values from drm timing values. The modification is based on the inputs from hw team and specifically proposed for 1440x576i and 1440x480i. But same changes holds good for other interlaced resolutions also. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
Cleanup by removing flags variable from drm_hdmi_dt_parse_pdata which is not used anywhere. Swtiching to of_get_named_gpio instead of of_get_named_gpio_flags solved this. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Acked-by: NSeung-Woo Kim <sw0312@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
HDMI driver needs to configure the mout_hdmi mux clock to change the parent between sclk_hdmiphy and sclk_pixel. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sean Paul 提交于
Change the clk_enable/clk_disable calls in mixer and hdmi drivers into clk_prepare_enable/clk_disable_unprepare, respectively. Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 YoungJun Cho 提交于
This patch cleans up logs for DRM_ERROR / DRM_DEBUG_KMS to avoid logging duplicated function name because the macros already contain __func__. Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com> Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 YoungJun Cho 提交于
This patch removes tracking log functions which were used to debug in the early development stage and are not so important as were. So remove them for code clean up. Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com> Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
This patch renames check_timing to check_mode and removes the unnecessary conversion of drm_display_mode to/from fb_videomode in the hdmi driver. v4: 1) Changed the commit message to add information related to renaming the callbacks to check_mode. 2) Changed debug message to print 1/0 for interlace mode. v3: 1) Replaced check_timing callbacks with check_mode. 2) Change the type of second parameter of check_mode callback from void pointer paramenter to struct drm_display_mode pointer. v2: 1) Removed convert_to_video_timing(). 2) Corrected DRM_DEBUG_KMS to print the resolution properly. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Seung-Woo Kim 提交于
The definition of regulator_bulk_enable is fixed with __must_check and this causes following build warning. warning: ignoring return value of 'regulator_bulk_enable', declared with attribute warn_unused_result This patch fixes to check return value of the function. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 23 5月, 2013 2 次提交
-
-
由 Seung-Woo Kim 提交于
devm_request_threaded_irq is used instead of request_threaded_irq and free_irq is removed. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Seung-Woo Kim 提交于
Struct device pointer got from platform device pointer is already alsigned as variable, but some functions do not use device pointer. So this patch replaces thoes usages. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 22 5月, 2013 1 次提交
-
-
由 Lars-Peter Clausen 提交于
free_irq() expects the same pointer that was passed to request_threaded_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_threaded_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 18 5月, 2013 1 次提交
-
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
- 29 4月, 2013 1 次提交
-
-
由 Sachin Kamat 提交于
Silences the following checkpatch warning: WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 16 4月, 2013 3 次提交
-
-
由 Sachin Kamat 提交于
Use IS_ERR instead of IS_ERR_OR_NULL on clk_get results. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
Currently, mode_fixup code doesn't consider the limitations of mixer as it is implemented inside the hdmi driver. Following fix, moves the mode_fixup to common drm hdmi driver. To check the mode support, it calls both, mixer and hdmi check_timing callbacks for a given resolution mode. This patch is dependent on https://patchwork.kernel.org/patch/2176021/. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
Exynos5 is already using drm_display_mode for timings parameters. Exynos4 is also modifed to use the same. List of supported resolutions and corresponding timings are removed which helps is enabling some extra resolutions. It also cleans some of the duplicate code. Exynos4 and Exynos5 Mixers, work fine for the same range of resolutions. Hence same condition (to find the supported mode) is applied to both. More exynos4 phy configs can be added later to extend the mode supprot. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 21 2月, 2013 2 次提交
-
-
由 Sean Paul 提交于
This patch programs the core and timing generator registers using the timing data provided in drm_display_mode and not using hard-coded configurations. Additional PHY configs has been added. This allows us to support more permissible resolutions and refresh rates. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NShirish S <s.shirish@samsung.com> Signed-off-by: NAkshay Saraswat <Akshay.s@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
This patch adds the display mode check operation to exynos_mixer_ops in drm-common-hdmi. In Exynos SoCs, mixer IP can put certain restrictions on the proposed display modes. These restriction needs to be considered during mode negotiation, which happens immediately after edid parsing. Both, mixer check-mode and hdmi check-timing callbacks are called one after another and ANDed result is returned back. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 26 1月, 2013 1 次提交
-
-
由 Thierry Reding 提交于
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Cc: David Airlie <airlied@linux.ie> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 1月, 2013 5 次提交
-
-
由 Shirish S 提交于
V2: Add mutex protection, while read. The hdmi and mixer win_commit calls currently are not checking the status of IP before updating the respective registers, this patch adds this check. Signed-off-by: NShirish S <s.shirish@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Arnd Bergmann 提交于
Patch 9eb3e9e6 "drm/exynos: add support for ARCH_MULTIPLATFORM" allowed building the exynos hdmi driver on non-samsung platforms, which unfortunately broke compilation in combination with 22c4f428 "drm: exynos: hdmi: add support for exynos5 hdmi", which added an inclusion of the samsung-specific plat/gpio-cfg.h header file. Fortunately, that header file is not required any more here, so we can simply revert the inclusion in order to build the ARM allyesconfig again without getting this error: drivers/gpu/drm/exynos/exynos_hdmi.c:37:27: fatal error: plat/gpio-cfg.h: No such file or directory Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Sean Paul 提交于
Remove the "internal" interrupt handling since it's never invoked and remove "external" reference. This patch removes a bunch of dead code and clarifies how hotplugging is handled in the HDMI driver. Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sean Paul 提交于
Replace the unnecessary atomic mdelay calls with usleep_range calls. Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
There's no need to allocate edid twice and do a memcpy when drm helpers exist to do just that. This patch cleans that interaction up, and doesn't keep the edid hanging around in the connector. v4: - removed error check for drm_mode_connector_update_edid_property which is expected to fail for Virtual Connectors like VIDI. Thanks to Seung-Woo Kim. v3: - removed MAX_EDID as it is not used anymore. v2: - changed vidi_get_edid callback inside vidi driver. Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 04 1月, 2013 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: David Airlie <airlied@linux.ie> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 14 12月, 2012 4 次提交
-
-
由 Sachin Kamat 提交于
This is an unlikely case. However to silence the following smatch error add a NULL check: drivers/gpu/drm/exynos/exynos_hdmi.c:2486 hdmi_probe() error: potential NULL dereference 'match'. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sachin Kamat 提交于
Add CONFIG_OF to compile conditionally. of_match_ptr eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
This patch adds support for controlling power of hdmi phy for exynos5 soc. A special bit is provided in exynos5 for directly switching of PHY while in exynos4, phy power needs to be controlled through i2c settings. I2C configuration may affect the suspend to resume and wake-up time requirements hence not added. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Rahul Sharma 提交于
This patch adds runtime power management support for exynos drm hdmi driver. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NShirish S <s.shirish@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 05 12月, 2012 1 次提交
-
-
由 Rahul Sharma 提交于
This patch adds code for composing AVI and AUI info frames and send them every VSYNC. This patch is important for hdmi certification. v3: - Moved enums, macros to exynos_hdmi.c. - Corrected hex format. - Added static to hdmi_reg_infoframe. v2: - Added few blank lines. - Corrected comments format. - Added comments for 2's Complement calculation for check sum. v1: - Remove un-necessary blank lines. - Change the case of hex constants. Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com> Signed-off-by: NFahad Kunnathadi <fahad.k@samsung.com> Signed-off-by: NShirish S <s.shirish@samsung.com> Acked-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-