- 18 4月, 2008 40 次提交
-
-
由 David Chinner 提交于
xfs_trans_commit() can return errors when there are problems in the transaction subsystem. They are indicative that the entire transaction may be incomplete, and hence the error should be propagated as there is a good possibility that there is something fatally wrong in the filesystem. Catch and propagate or warn about commit errors in the places where they are currently ignored. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30795a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
xfs_trans_reserve() reports errors that should not be ignored. For example, a shutdown filesystem will report errors through xfs_trans_reserve() to prevent further changes from being attempted on a damaged filesystem. Catch and propagate all error conditions from xfs_trans_reserve(). SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30794a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Removing an ACL can return an error. Propagate it. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30793a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Propagate the error status from xfs_acl_setmode() so that callers know if the ACl was set correctly or not. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30792a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Truncating the quota files can silently fail. Ensure that truncation errors are propagated to the callers. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30791a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
When turning off quota, we need to write various transactions to the log to ensure that they are cleanly removed in the case of a crash. We need to check that the transactions hit the disk correctly. If we fail to write the final quota off transaction, we are corrupt in memory and so the only option is to shut the filesystem down at this point. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30790a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Warn to the syslog if we fail to reset the quota flags in the superblock when a quota check fails. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30789a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
xfs_qm_mount_quotas() returns an error status that is ignored. If we fail to mount quotas, we continue with quota's turned off, which is all handled inside xfs_qm_mount_quotas(). Mark it as void to indicate that errors need not be returned to the callers. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30788a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
xfs_qm_dqflush() can fail, but the return is not checked anywhere. Hence we never know if we've failed to flush a dquot to disk. Propagate the error and warn to the syslog if a flush ever fails. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30787a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
xfs_qm_dqflush_all() can return flush errors. Ensure they are propagated into the quotacheck code to determine if the quotacheck succeeded or not. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30786a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Declare it void. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30785a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
xfs_reserve_blocks() can fail in interesting ways. In neither case is it a fatal error, but the result can lead to sub-optimal behaviour. Warn to the syslog if the call fails but otherwise continue. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30784a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Mark it void. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30782a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Makes it simpler to annotate function prototypes with __must_check via sed scripts. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30781a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30780a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
This target component validation is not POSIX conformant and it is not done by any other Linux filesystem so remove it from XFS. SGI-PV: 980080 SGI-Modid: xfs-linux-melb:xfs-kern:30776a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30775a Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Harvey Harrison 提交于
Remove the remaining uses of __inline in the XFS code base. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30774a Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Recent changes to xlog_state_release_iclog() placed the grant_lock inside the icloglock. forced unmount of the log does this the opposite way around, but does not depend on the order for correct working. Fix the inversion by changing the order locks are gained in xfs_log_force_umount(). SGI-PV: 979661 SGI-Modid: xfs-linux-melb:xfs-kern:30773a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
To reduce contention on the log in large CPU count, separate out different parts of the xlog_t structure onto different cachelines. Move each lock onto a different cacheline along with all the members that are accessed/modified while that lock is held. Also, move the debugging code into debug code. SGI-PV: 978729 SGI-Modid: xfs-linux-melb:xfs-kern:30772a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
The ticket allocator is just a simple slab implementation internal to the log. It requires the icloglock to be held when manipulating it and this contributes to contention on that lock. Just kill the entire allocator and use a memory zone instead. While there, allow us to gracefully fail allocation with ENOMEM. SGI-PV: 978729 SGI-Modid: xfs-linux-melb:xfs-kern:30771a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Rather than use the icloglock for protecting the iclog completion callback chain, use a new per-iclog lock so that walking the callback chain doesn't require holding a global lock. This reduces contention on the icloglock during transaction commit and log I/O completion by reducing the number of times we need to hold the global icloglock during these operations. SGI-PV: 978729 SGI-Modid: xfs-linux-melb:xfs-kern:30770a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Lachlan McIlroy 提交于
While investigating the extent corruption bug I ran into this bug in debug only code. xfs_bmap_check_leaf_extents() loops through the leaf blocks of the extent btree checking that every extent is entirely before the next extent. It also compares the last extent in the previous block to the first extent in the current block when the previous block has been released and potentially unmapped. So take a copy of the last extent instead of a pointer. Also move the last extent check out of the loop because we only need to do it once. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30718a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 Christoph Hellwig 提交于
Most VN_RELE calls either directly contain a XFS_ITOV or have the corresponding xfs_inode already in scope. Use the IRELE helper instead of VN_RELE to clarify the code. With a little more work we can kill VN_RELE altogether and define IRELE in terms of iput directly. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30710a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Lachlan McIlroy 提交于
The three subcases of xfs_ioc_xattr don't share any semantics and almost no code, so split it into three separate helpers. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30709a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
- rename rootvp to root for clarify - remove useless vn_to_inode call - check is_bad_inode before calling d_alloc_root - use iput instead of VN_RELE in the error case SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30708a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
When writing into preallocated regions there is a case where XFS can oops or hang doing the unwritten extent conversion on I/O completion. It turns out that the problem is related to the btree cursor being invalid. When we do an insert into the tree, we may need to split blocks in the tree. When we only split at the leaf level (i.e. level 0), everything works just fine. However, if we have a multi-level split in the btreee, the cursor passed to the insert function is no longer valid once the insert is complete. The leaf level split is handled correctly because all the operations at level 0 are done using the original cursor, hence it is updated correctly. However, when we need to update the next level up the tree, we don't use that cursor - we use a cloned cursor that points to the index in the next level up where we need to do the insert. Hence if we need to split a second level, the changes to the tree are reflected in the cloned cursor and not the original cursor. This clone-and-move-up-a-level-on-split behaviour recurses all the way to the top of the tree. The complexity here is that these cloned cursors do not point to the original index that was inserted - they point to the newly allocated block (the right block) and the original cursor pointer to that level may still point to the left block. Hence, without deep examination of the cloned cursor and buffers, we cannot update the original cursor with the new path from the cloned cursor. In these cases the original cursor could be pointing to the wrong block(s) and hence a subsequent modification to the tree using that cursor will lead to corruption of the tree. The crash case occurs when the tree changes height - we insert a new level in the tree, and the cursor does not have a buffer in it's path for that level. Hence any attempt to walk back up the cursor to the root block will result in a null pointer dereference. To make matters even more complex, the BMAP BT is rooted in an inode, so we can have a change of height in the btree *without a root split*. That is, if the root block in the inode is full when we split a leaf node, we cannot fit the pointer to the new block in the root, so we allocate a new block, migrate all the ptrs out of the inode into the new block and point the inode root block at the newly allocated block. This changes the height of the tree without a root split having occurred and hence invalidates the path in the original cursor. The patch below prevents xfs_bmbt_insert() from returning with an invalid cursor by detecting the cases that invalidate the original cursor and refresh it by do a lookup into the btree for the original index we were inserting at. Note that the INOBT, AGFBNO and AGFCNT btree implementations also have this bug, but the cursor is currently always destroyed or revalidated after an insert for those trees. Hence this patch only address the problem in the BMBT code. SGI-PV: 979339 SGI-Modid: xfs-linux-melb:xfs-kern:30701a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
At ENOSPC, we can get a filesystem shutdown due to a cancelling a dirty transaction in xfs_mkdir or xfs_create. This is due to the initial allocation attempt not taking into account inode alignment and hence we can prepare the AGF freelist for allocation when it's not actually possible to do an allocation. This results in inode allocation returning ENOSPC with a dirty transaction, and hence we shut down the filesystem. Because the first allocation is an exact allocation attempt, we must tell the allocator that the alignment does not affect the allocation attempt. i.e. we will accept any extent alignment as long as the extent starts at the block we want. Unfortunately, this means that if the longest free extent is less than the length + alignment necessary for fallback allocation attempts but is long enough to attempt a non-aligned allocation, we will modify the free list. If we then have the exact allocation fail, all other allocation attempts will also fail due to the alignment constraint being taken into account. Hence the initial attempt needs to set the "alignment slop" field so that alignment, while not required, must be taken into account when determining if there is enough space left in the AG to do the allocation. That means if the exact allocation fails, we will not dirty the freelist if there is not enough space available fo a subsequent allocation to succeed. Hence we get an ENOSPC error back to userspace without shutting down the filesystem. SGI-PV: 978886 SGI-Modid: xfs-linux-melb:xfs-kern:30699a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Josef 'Jeff' Sipek 提交于
Replace the xfs_ail_entry_t with a struct list_head and clean the surrounding code up. Also fixes a livelock in xfs_trans_first_push_ail() by terminating the loop at the head of the list correctly. SGI-PV: 978682 SGI-Modid: xfs-linux-melb:xfs-kern:30636a Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
When xfs_mountfs is called by xfs_mount xfs_readsb was called 35 lines above unconditionally, so there is no need to try to read the superblock if it's not present. If any other port doesn't have the superblock read at this point it should just call it directly from it's xfs_mount equivalent. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30603a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NDonald Douwsma <donaldd@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Niv Sardi 提交于
It's completely unused so we might aswell kill it. Note that there is another t_sema in struct xlog_ticket, which is used and actually an sv_t despite the name. That one is left untouched by this patch. SGI-PV: 971186 SGI-Modid: xfs-linux-melb:xfs-kern:30591a Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30553a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30552a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30551a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30550a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30548a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30547a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30546a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30545a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Now that the ktrace_enter() code is using atomics, the non-power-of-2 buffer sizes - which require modulus operations to get the index - are showing up as using substantial CPU in the profiles. Force the buffer sizes to be rounded up to the nearest power of two and use masking rather than modulus operations to convert the index counter to the buffer index. This reduces ktrace_enter overhead to 8% of a CPU time, and again almost halves the trace intensive test runtime. SGI-PV: 977546 SGI-Modid: xfs-linux-melb:xfs-kern:30538a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-