Right now, there is no notifier that is called on a new cpu, before the new
cpu begins processing interrupts/softirqs.
Various kernel function would need that notification, e.g. kvm works around
by calling smp_call_function_single(), rcu polls cpu_online_map.

The patch adds a CPU_STARTING notification. It also adds a helper function
that sends the message to all cpu_chain handlers.

Tested on x86-64.
All other archs are untested. Especially on sparc, I'm not sure if I got
it right.
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It's never used and the comments refer to nonatomic and retry
interchangably. So get rid of it.
Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Joe Perches noticed some printks in smp.c that needed fixing.

While I was in there, I did the usual tidying in arch/um/kernel, which
should be fairly style-clean at this point:
	copyright updates
	emacs formatting comments removal
	include tidying
	style fixes

Cc: Joe Perches <joe@perches.com>
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Code tidying -
	the pid field of struct irq_fd isn't used, so it is removed
     	os_set_fd_async needed to read flags before changing them, it
doesn't need a pid passed in because it can call getpid itself, and a
block of unused code needed deleting
	os_get_exec_close was unused, so it is removed
	ptrace_child called _exit for historical reasons which are no
longer valid, so just calls exit instead
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tidy kern_util.h.  It turns out that most of the function declarations
aren't used, so they can go away.  os.h no longer includes
kern_util.h, so files which got it through os.h now need to include it
directly.  A number of other files never needed it, so these includes
are deleted.

The structure which was used to pass signal handlers from the kernel
side to the userspace side is gone.  Instead, the handlers are
declared here, and used directly from libc code.  This allows
arch/um/os-Linux/trap.c to be deleted, with its remnants being moved
to arch/um/os-Linux/skas/trap.c.

arch/um/os-Linux/tty.c had its inclusions changed, and it needed some
style attention, so it got tidied.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Formatting changes in the files which have been changed in the
tt-removal patchset so far.  These include:
	copyright updates
	header file trimming
	style fixes
	adding severity to printks
	indenting Kconfig help according to the predominant kernel style

These changes should be entirely non-functional.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset throws out tt mode, which has been non-functional for a while.

This is done in phases, interspersed with code cleanups on the affected files.

The removal is done as follows:
	remove all code, config options, and files which depend on
CONFIG_MODE_TT
	get rid of the CHOOSE_MODE macro, which decided whether to
call tt-mode or skas-mode code, and replace invocations with their
skas portions
	replace all now-trivial procedures with their skas equivalents

There are now a bunch of now-redundant pieces of data structures, including
mode-specific pieces of the thread structure, pt_regs, and mm_context.  These
are all replaced with their skas-specific contents.

As part of the ongoing style compliance project, I made a style pass over all
files that were changed.  There are three such patches, one for each phase,
covering the files affected by that phase but no later ones.

I noticed that we weren't freeing the LDT state associated with a process when
it exited, so that's fixed in one of the later patches.

The last patch is a tidying patch which I've had for a while, but which caused
inexplicable crashes under tt mode.  Since that is no longer a problem, this
can now go in.

This patch:

Start getting rid of tt mode support.

This patch throws out CONFIG_MODE_TT and all config options, code, and files
which depend on it.

CONFIG_MODE_SKAS is gone and everything that depends on it is included
unconditionally.

The few changed lines are in re-written Kconfig help, lines which needed
something skas-related removed from them, and a few more which weren't
strictly deletions.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename os_{read_write}_file_k back to os_{read_write}_file, delete
the originals and their bogus infrastructure, and fix all the callers.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Formatting fixes ahead of renaming os_{read_write}_file_k to
os_{read_write}_file and fixing all the callers.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch starts the removal of a very old, very broken piece of code.  This
stems from the problem of passing a userspace buffer into read() or write() on
the host.  If that buffer had not yet been faulted in, read and write will
return -EFAULT.

To avoid this problem, the solution was to fault the buffer in before the
system call by touching the pages that hold the buffer by doing a copy-user of
a byte to each page.  This is obviously bogus, but it does usually work, in tt
mode, since the kernel and process are in the same address space and userspace
addresses can be accessed directly in the kernel.

In skas mode, where the kernel and process are in separate address spaces, it
is completely bogus because the userspace address, which is invalid in the
kernel, is passed into the system call instead of the corresponding physical
address, which would be valid.  Here, it appears that this code, on every host
read() or write(), tries to fault in a random process page.  This doesn't seem
to cause any correctness problems, but there is a performance impact.  This
patch, and the ones following, result in a 10-15% performance gain on a kernel
build.

This code can't be immediately tossed out because when it is, you can't log
in.  Apparently, there is some code in the console driver which depends on
this somehow.

However, we can start removing it by switching the code which does I/O using
kernel addresses to using plain read() and write().  This patch introduces
os_read_file_k and os_write_file_k for use with kernel buffers and converts
all call locations which use obvious kernel buffers to use them.  These
include I/O using buffers which are local variables which are on the stack or
kmalloc-ed.  Later patches will handle the less obvious cases, followed by a
mass conversion back to the original interface.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

user_util.h isn't needed any more, so delete it and remove all includes of it.
Signed-off-by: NJeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kbuild explicitly includes this at build time.
Signed-off-by: NDave Jones <davej@redhat.com>

fork_idle() does unhash_process() just after copy_process().  Contrary,
boot_cpu's idle thread explicitely registers itself for each pid_type with nr
= 0.

copy_process() already checks p->pid != 0 before process_counts++, I think we
can just skip attach_pid() calls and job control inits for idle threads and
kill unhash_process().  We don't need to cleanup ->proc_dentry in fork_idle()
because with this patch idle threads are never hashed in
kernel/pid.c:pid_hash[].

We don't need to hash pid == 0 in pidmap_init().  free_pidmap() is never
called with pid == 0 arg, so it will never be reused.  So it is still possible
to use pid == 0 in any PIDTYPE_xxx namespace from kernel/pid.c's POV.

However with this patch we don't hash pid == 0 for PIDTYPE_PID case.  We still
have have PIDTYPE_PGID/PIDTYPE_SID entries with pid == 0: /sbin/init and
kernel threads which don't call daemonize().
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel dir).

This moves all systemcalls from irq_user.c file under os-Linux dir
Signed-off-by: NGennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!