- 23 3月, 2006 8 次提交
-
-
ES7000 platform code clean up for compilation errors and a warning. Ifdef'd the ACPI related parts in the ES7000 platform code. They were causing compile errors in certain configuration (without ACPI defined). I think this approach would be best (as opposed to Kconfig changes) since it only touches the subarch... Signed-off-by: <Natalie.Protasevich@unisys.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
When vendor-specific i386 initialization code is unavailable the kernel falls back to a default CPU model name. Make that model name reflect the CPU family instead of an internal vendor index. Tested on Pentium II (family 6 model 5). /proc/cpuinfo before: model name : ff/05 after: model name : 06/05 Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Acked-by: N"Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
Allow the x86 "sep" feature to be disabled at bootup. This forces use of the int80 vsyscall. Mainly for testing or benchmarking the int80 vsyscall code. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
Several places in arch/i386/kernel/cpu and kernel/cpu were using __devinit when they should have been __cpuinit. Fixing that saves ~4K when CONFIG_HOTPLUG && !CONFIG_HOTPLUG_CPU. Noticed by Andrew Morton. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Gerd Hoffmann 提交于
Implement SMP alternatives, i.e. switching at runtime between different code versions for UP and SMP. The code can patch both SMP->UP and UP->SMP. The UP->SMP case is useful for CPU hotplug. With CONFIG_CPU_HOTPLUG enabled the code switches to UP at boot time and when the number of CPUs goes down to 1, and switches to SMP when the number of CPUs goes up to 2. Without CONFIG_CPU_HOTPLUG or on non-SMP-capable systems the code is patched once at boot time (if needed) and the tables are released afterwards. The changes in detail: * The current alternatives bits are moved to a separate file, the SMP alternatives code is added there. * The patch adds some new elf sections to the kernel: .smp_altinstructions like .altinstructions, also contains a list of alt_instr structs. .smp_altinstr_replacement like .altinstr_replacement, but also has some space to save original instruction before replaving it. .smp_locks list of pointers to lock prefixes which can be nop'ed out on UP. The first two are used to replace more complex instruction sequences such as spinlocks and semaphores. It would be possible to deal with the lock prefixes with that as well, but by handling them as special case the table sizes become much smaller. * The sections are page-aligned and padded up to page size, so they can be free if they are not needed. * Splitted the code to release init pages to a separate function and use it to release the elf sections if they are unused. Signed-off-by: NGerd Hoffmann <kraxel@suse.de> Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Make CONFIG_REGPARM enabled by default. It's a noticable win both for size and for performance, and gcc[34] handles it correctly. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
REGPARM has already gotten much testing, what about removing the dependency on EXPERIMENTAL? Additionally, this patch does: - remove the useless "default n" - remove note regarding binary only modules (nowadays, there are even some binary only modules compiled with REGPARM=y available) Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 3月, 2006 7 次提交
-
-
由 David Gibson 提交于
Quite a long time back, prepare_hugepage_range() replaced is_aligned_hugepage_range() as the callback from mm/mmap.c to arch code to verify if an address range is suitable for a hugepage mapping. is_aligned_hugepage_range() stuck around, but only to implement prepare_hugepage_range() on archs which didn't implement their own. Most archs (everything except ia64 and powerpc) used the same implementation of is_aligned_hugepage_range(). On powerpc, which implements its own prepare_hugepage_range(), the custom version was never used. In addition, "is_aligned_hugepage_range()" was a bad name, because it suggests it returns true iff the given range is a good hugepage range, whereas in fact it returns 0-or-error (so the sense is reversed). This patch cleans up by abolishing is_aligned_hugepage_range(). Instead prepare_hugepage_range() is defined directly. Most archs use the default version, which simply checks the given region is aligned to the size of a hugepage. ia64 and powerpc define custom versions. The ia64 one simply checks that the range is in the correct address space region in addition to being suitably aligned. The powerpc version (just as previously) checks for suitable addresses, and if necessary performs low-level MMU frobbing to set up new areas for use by hugepages. No libhugetlbfs testsuite regressions on ppc64 (POWER5 LPAR). Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Buesch 提交于
Remove the inlining of the new vs old mmap system call common code. This reduces the size of the resulting vmlinux for defconfig as follows: mb@pc1:~/develop/git/linux-2.6$ size vmlinux.mmap* text data bss dec hex filename 3303749 521524 186564 4011837 3d373d vmlinux.mmapinline 3303557 521524 186564 4011645 3d367d vmlinux.mmapnoinline The new sys_mmap2() has also one function call overhead removed, now. (probably it was already optimized to a jmp before, but anyway...) Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
set_page_count usage outside mm/ is limited to setting the refcount to 1. Remove set_page_count from outside mm/, and replace those users with init_page_count() and set_page_refcounted(). This allows more debug checking, and tighter control on how code is allowed to play around with page->_count. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
Stop using __put_page and page_count in i386 pageattr.c Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
When on_each_cpu() runs the callback on other CPUs, it runs with local interrupts disabled. So we should run the function with local interrupts disabled on this CPU, too. And do the same for UP, so the callback is run in the same environment on both UP and SMP. (strictly it should do preempt_disable() too, but I think local_irq_disable is sufficiently equivalent). Also uninlines on_each_cpu(). softirq.c was the most appropriate file I could find, but it doesn't seem to justify creating a new file. Oh, and fix up that comment over (under?) x86's smp_call_function(). It drives me nuts. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ravikiran G Thirumalai 提交于
This variable is rarely written to. Mark the variable accordingly. Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
arch/i386/kernel/efi.c: In function `efi_call_phys_epilog': arch/i386/kernel/efi.c:118: warning: assignment makes integer from pointer without a cast Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 3月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
The i386 defconfig wasn't updated for ages. Instead of running "make oldconfig" on the old defconfig and trying to give reasonable answers at all new options, this patch replaces it with the one I'm using in 2.6.16-rc1. This way, it's a .config that is confirmed to work on at least one computer in the world. ;-) Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 17 3月, 2006 1 次提交
-
-
由 Srivatsa Vaddagiri 提交于
Bryce reported a bug wherein offlining CPU0 (on x86 box) and then subsequently onlining it resulted in a lockup. On x86, CPU0 is never offlined. The subsequent attempt to online CPU0 doesn't take that into account. It actually tries to bootup the already booted CPU. Following patch fixes the problem (as acknowledged by Bryce). Please consider for inclusion in 2.6.16. Check if cpu is already online. Signed-off-by: NSrivatsa Vaddagiri <vatsa@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 3月, 2006 1 次提交
-
-
由 Maneesh Soni 提交于
lapic_shutdown() re-enables interrupts which is un-desirable for panic case, so use local_irq_save() and local_irq_restore() to keep the irqs disabled for kexec on panic case, and close a possible race window while kdump shutdown as shown in this stack trace -- BUG: spinlock lockup on CPU#1, bash/4396, c52781a0 [<c01c1870>] _raw_spin_lock+0xb7/0xd2 [<c029e148>] _spin_lock+0x6/0x8 [<c011b33f>] scheduler_tick+0xe7/0x328 [<c0128a7c>] update_process_times+0x51/0x5d [<c0114592>] smp_apic_timer_interrupt+0x4f/0x58 [<c01141ff>] lapic_shutdown+0x76/0x7e [<c0104d7c>] apic_timer_interrupt+0x1c/0x30 [<c01141ff>] lapic_shutdown+0x76/0x7e [<c0116659>] machine_crash_shutdown+0x83/0xaa [<c013cc36>] crash_kexec+0xc1/0xe3 [<c029e148>] _spin_lock+0x6/0x8 [<c013cc22>] crash_kexec+0xad/0xe3 [<c0215280>] __handle_sysrq+0x84/0xfd [<c018d937>] write_sysrq_trigger+0x2c/0x35 [<c015e47b>] vfs_write+0xa2/0x13b [<c015ea73>] sys_write+0x3b/0x64 [<c0103c69>] syscall_call+0x7/0xb Signed-off-by: NManeesh Soni <maneesh@in.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 3月, 2006 4 次提交
-
-
由 Andi Kleen 提交于
ATI chipsets tend to generate double timer interrupts for the local APIC timer when both the 8254 and the IO-APIC timer pins are enabled. This is because they route it to both and the result is anded together and the CPU ends up processing it twice. This patch changes check_timer to disable the 8254 routing for interrupt 0. I think it would be safe on all chipsets actually (i tested it on a couple and it worked everywhere) and Windows seems to do it in a similar way, but to be conservative this patch only enables this mode on ATI (and adds options to enable/disable too) Ported over from a similar x86-64 change. I reused the ACPI earlyquirk infrastructure for the ATI bridge check, but tweaked it a bit to work even without ACPI. Inspired by a patch from Chuck Ebbert, but redone. Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Matz 提交于
While testing kexec and kdump we hit problems where the new kernel would freeze or instantly reboot. The easiest way to trigger it was to kexec a kernel compiled for CONFIG_M586 on an athlon cpu. Compiling for CONFIG_MK7 instead would work fine. The patch fixes a few problems with the kexec inline asm. Signed-off-by: NChris Mason <mason@suse.com> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shaohua Li 提交于
The x86_model calculation also applies for family 6. early_cpu_detect does the right thing, but generic_identify misses. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: "Seth, Rohit" <rohit.seth@intel.com> Acked-by: NAndi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 GOTO Masanori 提交于
Fix i386 nmi_watchdog that does not meet watchdog timeout condition. It does not hit die_nmi when it should be triggered, because the current nmi_watchdog_tick in arch/i386/kernel/nmi.c never count up alert_counter like this: void nmi_watchdog_tick (struct pt_regs * regs) { if (last_irq_sums[cpu] == sum) { alert_counter[cpu]++; <- count up alert_counter, but if (alert_counter[cpu] == 5*nmi_hz) die_nmi(regs, "NMI Watchdog detected LOCKUP"); alert_counter[cpu] = 0; <- reset alert_counter This patch changes it back to the previous and working version. This was found and originally written by Kohta NAKASHIMA. (akpm: also uninline write_watchdog_counter(), saving 184 byets) Signed-off-by: NGOTO Masanori <gotom@sanori.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 3月, 2006 2 次提交
-
-
由 Edgar Hucek 提交于
This patch makes the kernel bootable again on ia32 EFI systems. Signed-off-by: NEdgar Hucek <hostmaster@ed-soft.at> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Atsushi Nemoto 提交于
i386 timer_resume is updating jiffies, not jiffies_64. It looks there is a potential overflow problem. And jiffies_64 and wall_jiffies should be protected by xtime_lock. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 3月, 2006 1 次提交
-
-
由 Dave Jones 提交于
This driver loops over 'num_online_cpus', but it doesn't account for holes in the online map created by offlined cpus, and assumes that the cpu numbers stay linear. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 2月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
Revert "[PATCH] x86_64: Only do the clustered systems have unsynchronized TSC assumption on IBM systems" This reverts commit 13a229ab. Quoth Andi: "After some consideration and feedback from various people it turns out this wasn't that good an idea. It has some problems and needs more work. Since it was only an optimization anyways it's best to just back it out again for now." Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 2月, 2006 4 次提交
-
-
由 Linus Torvalds 提交于
Commit 9ec4b1f3 made kprobes not compile without module support, so just make that clear in the Kconfig file. Also, since it's marked EXPERIMENTAL, make that dependency explicit too. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Bottomley 提交于
Commit 9c869eda broke voyager again rather subtly because it already had its own topology exporting functions, so now each CPU gets registered twice. I think we can actually use the generic ones, so I don't propose reverting it. The attached should eliminate the voyager topology functions in favour of the generic ones. I also added a define to ensure voyager is never hotplug CPU (we don't have the support in the SMP harness). Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Deresch 提交于
[description from AK] This fixes booting in APIC mode on some ACER laptops. x86-64 did a similar change some time ago. See http://bugzilla.kernel.org/show_bug.cgi?id=4700 for details Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Big Unisys systems have multiple clusters too, but they have an synchronized TSC. I'm using the SMBIOS to check for vendor == IBM. Cc: Chris McDermott <lcm@us.ibm.com> Cc: "Protasevich, Natalie" <Natalie.Protasevich@unisys.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 2月, 2006 5 次提交
-
-
由 Zachary Amsden 提交于
When compiling a non-default subarch, topology.c is missing from the kernel build. This causes builds with CONFIG_HOTPLUG_CPU to fail. In addition, on Intel processors with cpuid level > 4, it causes intel_cacheinfo.c to reference uninitialized data that should have been set up by the initcall in topology.c which calls register_cpu. This causes a kernel panic on boot on newer Intel processors. Moving topology.c to arch/i386/kernel fixes both of these problems. Thanks to Dan Hecht for finding and fixing this problem. Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NDan Hecht <dhect@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Bottomley 提交于
Recent GDT changes broke the SMP boot sequence if the booting CPU is numbered anything other than zero. There's also a subtle source of error in that the boot time CPU now uses cpu_gdt_table (which is actually the GDT for booting CPUs in head.S). This patch fixes both problems by making GDT descriptors themselves allocated from a per_cpu area and switching to them in cpu_init(), which now means that cpu_gdt_table is exclusively used for booting CPUs again. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Matt Tolentino <metolent@snoqualmie.dp.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Bottomley 提交于
Right at the moment (thanks to a patch from Andrew), cpu_possible_map on voyager is CPU_MASK_NONE, which means the machine always thinks it has no CPUs. Fix that by doing an early initialisation of the cpu_possible_map from the cpu_phys_present_map. (akpm: we aim to please) Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Bottomley 提交于
It looks like I can't get away without exporting topology functions from voyager any longer, so add them to the voyager subarchitecture. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Prasanna S Panchamukhi 提交于
Fix a problem seen on i686 machine with NX support where the instruction could not be single stepped because of NX bit set on the memory pages allocated by kprobes module. This patch provides allocation of instruction solt so that the processor can execute the instruction from that location similar to x86_64 architecture. Thanks to Bibo and Masami for testing this patch. Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 2月, 2006 1 次提交
-
-
由 Daniel Yeisley 提交于
I'm seeing a kernel panic on an ES7000-600 when booting in virtual wire mode. The panic happens because smp_read_mpc() is passed a physical address, and it should be virtual. I tested the attached patch on the ES7000-600 and on a 2 cpu Dell box, and saw no problems on either. Signed-off-by: NDan Yeisley <dan.yeisley@unisys.com> Acked-by: NAndi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 2月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
AMD SimNow!'s JIT doesn't like them at all in the guest. For distribution installation it's easiest if it's a boot time option. Also I moved the variable to a more appropiate place and make it independent from sysctl And marked __read_mostly which it is. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 2月, 2006 3 次提交
-
-
由 Thomas Meyer 提交于
Add some more gitignore files for i386 architecture. This files are created during the build process of a i386 kernel. Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Albert D. Cahalan 提交于
This path isn't obvious. It looks as if the kernel will be taking three args from the user stack, but it only takes one from there. Signed-off-by: NAlbert Cahalan <acahalan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Gerald Britton 提交于
Fix x86 oprofile regression introduced by: commit c34d1b4d [PATCH] mm: kill check_user_page_readable That commit reorganized tests for the userspace stack walking moving all those tests into dump_backtrace(), however, dump_backtrace() was used for both userspace and kernel stalk walking. The result is typically no recorded callgraph information for kernel samples. Revive the original function as dump_kernel_backtrace() and rename the other to dump_user_backtrace() to avoid future confusion. Signed-off-by: NGerald Britton <gbritton@alum.mit.edu> Apology-from: Hugh Dickins <hugh@veritas.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-